Help- After upgrading to Mountain Lion 10.8.4 all of my default user pictures are missing

Hello,
After ugrading to Mountain LIon 10.8.4 on my 2010 1.4 GHz Macbook air and now all of my default user pictures are missing.
I found a similar situation on the net in which the guy says to do this: "logged in as root and trashed the old user icon images file the copied the folder froma ML factory disk image". I have no idea what any of that means or if is for real as an answer or just a way to screw up my computer even more. I need help, and really basic simple instructions like your talking to some one who barely know how to turn on a computer. I would be really grateful to anyone who will help me. Thank you for your time.

I found a simple solution that worked on my Macbook Air running 10.8.4 which was missing all the User pictures when I tried to access them as the computer administrator even through they wer all there in the User Pictures folder in the Library.
I went into the Library Folder and trashed the "User Pictures" Folder.
I then copied the User Pictures folder from my Macbook Pro (also running 10.8.4) that did not have this issue and installed in on the Macbook Air in place of the User Pictures folder I had trashed. Then it all worked fine.

Similar Messages

Missing Help after Upgrading to Mountain Lion

I upgraded from Snow Leopard to Mountain Lion (10.8.2) yesterday, on my Mac Pro.
Since then, every time I try to access help, it tells me:
The selected topic is currently unavailable
Make sure you’re connected to the Internet. For help connecting, choose Apple menu > System Preferences, click Network, and click “Assist me.”
If you’re connected to the Internet, and the content still doesn’t appear, try again later.
My Mac Pro is connected to the Internet. I've tried again later a number of times yesterday and again today.
This has occurred for quite a few topics, such as Notes, Finder, etc.
What must I do to get Help content for Mountain Lion?
Thanks!

I looked on my Snow Leopard system, and found the Mac Help in:
/Library/Documentation/Help/MacHelp.help/Contents/Resources/English.lproj
There are several directories under there that hold the individual documentation pages, such as pgs, pgs2.
There are no pgs* folders in that directory on my upgraded Mountain Lion system.
Does that mean that the documentation did not get installed during the installation? If so, is there a way to install Help after the fact, or do I have to reinstall Mountain Lion?
Or, is the documentation installed elsewhere for Mountain Lion?

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

Application quit unexpectedly after upgrade to Mountain Lion.

Hi, Please help. after upgrade to Mountain Lion 10.8.1 my iPhoto keeps quitting unexpectedly, then after upgrading to 10.8.2 yesterday, now almost most of my application which I used todays quits unexpectedly, this includes my broadband connection. I plan to fallback to Lion, but paying $20 for OS that causing me so many problem is not worth it. Anyone can help me to resolved this? Thanks in advance..

Have you tried booting into the Mountain Lion Recovery Partition by booting while simultaneously holding down the Command - R keys? You can repair the main Mountain Lion partition disk from there by using "Disk Utility" from THAT location. Select the Macintosh HD in the column by highlighting it and selecting "Repair Disk". Then I would run "Repair Permissions" twice. That may solve your problems.
Hope this helps

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?

After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?

Augend wrote:
After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?
There have been a few threads about this. The feature seems to have gone missing in Mountain Lion even though the Help for Preview still mentions it.
I've filed a bug report on it.
Matt

After upgrading to mountain lion, the movies I create using iDVD periodically stop then resume abruptly when I play them back on my DVD player. Any ideas on correcting this?

After upgrading to mountain lion, the movies/slideshows I create using iDVD playback in a jolting start/stop manner. This didn't happen with the prior os - playbacks were flawless. Any ideas, short of uninstalling mountain lion, on how to correct?

I know this is not much help. IDVD and Mountain Lion are working perfectly for me. I know many others that use Mountain Lion with iDVD also.
I think your problem lies elsewhere.

After upgrading to Mountain Lion, launching iPhoto reboots MBP

After upgrading to Mountain Lion, when I go to launch iPhoto, my MBP re-boots. This happens every time I try to launch iPhoto. The re-boot has occured randomly when using Safari and iMovie. Looking for help.

I was hopeful thAt this would help, but it did not. Still experiencing the same behaviors.

After upgrading to Mountain Lion it's not possible to play videos in Fullscreen Mode

Hello everyone,
after upgrading to Mountain Lion on my iMac (27 inch, Mid 2011) I got the problem, that every video or movie in full-screen mode jiggles after a while. I'm using my Mac as a TV with Elgato EyeTV - and usualy I use it in full-screen mode.
A complete new installation from scratch didn't solve my problem.
If the problem occurs, the processor idles ans the hard-disk activity is low.
Is there anybody out there, who can help me?
Regards,
Stephan

If the issue only occurs when watching TV (using Elgato) then it's an issue on their side. Try a browser window and if can view the browser in full screen mode then that proves the point. You can also create another user account, log into that account and see if the issue is still there. If it disappears then you have an issue in your normal user account that needs to be tracked down. If the issue persists then your issue is global.

The Airplay Icon is not showing up on My Taskbar After Upgrading to Mountain Lion

Please help. I have 2nd generation Apple TV and a 2011 Imac but the Airplay Icon will not show up on Taskbar after upgrading to Mountain Lion.

Finally after trying to uninstall/reinstall (no luck!)
I'm on Windows 7 64 bit. iTunes 10.7 And I have a solution:
If found a thread about IPv6.
I followed the same directions on Windows 7 64 bit and it worked.
Disable IPv6 on _all_ of your IP ethernet adapters.
That includes Virtual Machines (VMWare... yes those too), including IPv6 for wireless.
Close iTunes. Start iTunes. Works. Airplay Icon is back.
It looks like All of the AirPlay devices may have to be re-setup. At the very least rebooted.
I found that I had to clompletely erase my DHCP addresses from my (non Apple) router.. and that fixed it. Finally.
Even though this is for the Mac... I believe they are onto something. Original thread link:
http://mactips.dwhoard.com/mactips/other-applications/fix-airplay

Mail sorting problem after upgrading to Mountain Lion?

I have a strange problem with Mail after upgrading to Mountain Lion.
Before upgrading, when I tried to search my Mail Inbox for e-mails from a specific sender, the esearch results would be indexed by the name of the sender. For example: when I entered 'John Smith' in the search box in Mail, it would display a list of email from 'John Smith'
Now after upgrading, the same query indexes the search results by the 'To' address i.e. my email address.For example: if my name is 'Steve Johnson', a search for 'John Smith' in the search box in Mail displays a list of email to 'Steve Johnson' and not from 'John Smith' which is how it used to display before.
My emails are sorted by Date always, and I am using the default Mail view [not classic view]
Can someone please help with a fix for this to help me get back to the original display I had while searching? Thanks in advance.

I'm having the same problem. It's incredibly annoying!!! Did you find an answer?

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Connection issues after upgrade to Mountain Lion

Very strange internet connection problem here after upgrade to Mountain Lion.
I just upgraded MacBook (early 2009) to Mountain Lion. After upgrade, I'm having problems connecting to certain websites (ESPN, CNN, etc.), and I can't connect to the computer using LogMeIn.
BUT, I do have an internet connection. Skype works, Messages works, email works, some websites work. I tested using speedtest.net and it shows good download speed, but the upload speed is so slow that it can't even perform the test. A Windows PC on the same network works fine.
Next, I tested the MacBook on another wi-fi network at a coffee house, and everything works fine there!
So it might appear to be something wrong with the router? I have an Cisco (Linksys) E3200 and have upgraded to the latest firmware (1.0.4). But still doesn't work.
The firewall in Mountain Lion is turned off, and I temporarily turned off the firewall on the router and that didn't help, so doesn't appear to be any sort of firewall issue. I've never heard of an operating system being incompatible with a specific router anyway.
Can anyone thing of any setting or something in Mountain Lion that would causing internet connection problems with a specific router?

I don't know if this will 'fix' your problem, but have you tried the 10.8.5 Supplemental Update -> http://support.apple.com/kb/DL1686?
Clinton

ISight is not working after upgrade to Mountain Lion.

Please help!
After upgrade to Mountain Lion, Skype, Photobooth and etc can't detect iSight.

I tried the SMC option for my Mac (version details below)...but this still didn't solve my problem.
Model Name:
MacBook
Model Identifier:
MacBook7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.4 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
4 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MB71.0039.B0E
SMC Version (system):
1.60f5
Sudden Motion Sensor:
State
Enabled
In fact when I check under "About this Mac ==> More Info ==> System Report ==> Hardware ==> USB"
this is what I see:
-> USB Bus
      -> BRCM2070 Hub
             Bluetooth Host USB Controller
          Apple Internal Keyboard/Trackpad
      -> USB Bus
      -> USB High-speed Bus
      -> USB High-speed Bus
I find it hard to beleieve that the OSX Mountain Lion upgrade (from OSX Lion) can conk the camera hardware. All softwares such as Skype, Facetime, Image Capture show "No camera detected" after the OSX Mountain Lion upgrade. All of these were working perfectly fine before the upgrade.
Any help in this regard would be highly appreciated.
Regards,
Vishy

TrackPad physical click not working after upgrade to Mountain Lion

Does anybody know how to get my trackpad working again after upgrading to Mountain Lion?
I recently upgraded my MacBook (13-inch, Late 2009, Intel Core 2 Duo) from Snow Leopard to Mountain Lion. Everything seems to have gone well, except for trackpad behavior.
The primary problem is that the physical click of the trackpad is now erratic. Sometimes a physical click will work, and other times it will not work.
Note: The "tapping" of the trackpad DOES work consistently. I have confirmed that System Prefs > Trackpad > "Tap to Click" is enabled, and so tapping is not the problem. (The "tap to click" selector does exhibit a unique behavior however--if I DESELECT "tap to click," then the physical click no longer works at all. It looks like the "tap to click" selector can completely disable the physical click of the trackpad, but cannot enable the physical click completely.)
I have also checked the settings on System Prefs > Accessibility > Mouse & Trackpad, but none of those settings affect the physical click of the trackpad.
I tried zapping the PRAM, but that did not change the problem with physical clicking on the trackpad.
Grateful for any ideas...
Nertz

I ended up taking my MacBook to the Apple Genius Bar. The staff were very helpful.
The apple staff said that there is no known link between the upgrade to Mountain Lion and trackpad misbehavior. In my case, they made some hardware adjustments to the trackpad, and all is working properly again.
Bottom line: if you think that your trackpad misbehavior is related to Mountain Lion, you might want to take it to an Apple Genius Bar. If there really is no connection between Mountain Lion and trackpad behavior, then perhaps they can fix it for you (as happened to be true in my case). But if there IS a connection in some way, it would be helpful for Apple employees to see your evidence firsthand.
Best wishes to all...
Nertz

Help- After upgrading to Mountain Lion 10.8.4 all of my default user pictures are missing

Similar Messages

Maybe you are looking for