Help Agenda alarm configuration

Hello,
Is there a possibility to change the volume and type of alarm in the I-Touch calendar ? With the alarm by default in the aganda I don't know if you tried but you can't hear anything which is a problem if you use it to warn you few minutes before your appoitment

A A P L wrote:
Hook it up to an external source - stereo or iPod-specific speakers.
I have it setup that way.
I have a BOSE SoundDock at home and a stereo at the office.
Do you carry around all that stuff in your pocket? That is a really poor work around. Apple should fix this problem if possible through software. The iPod should be a stand alone device. When I am in a meeting, I do not what to be late for the next, and I need to hear it in my pocket.

Similar Messages

5230: agenda alarm sound: how to set (lower!) volu...

I can't find how to set (lower, it's way too loud for me) the volume of the alarm-sound for the agenda on my 5230.
Anyone ?
I also noticed there is no place to set the 'default' sound, seems the agenda-alarm-settings are "nowhere" (not in profiles anyway, I think) ?

All you can do is adjust the volume on your current profile, go if you want to reduce the volume of your alarm tone, change profile when you set the alarm, and set the ringing volume on the new profile at a volume you are happy with !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

PLease help me to configure

Hello Friends,
I need your help to configure my voice setup.I have two location connected with a point-to-point leased line. Both the ends have different brand pbx installed. One is connected with R1 with the help pf a T1 voice card and Other is connected with R2 with the help of a E1 card. I am giving an attachment of the scnerio. Please help me to configure the cisco 3640 routers with H.323 gateway. I will be very thankful to you.My bosses has given me this work to do. Now I need your help. I have some exerience to configure E1 and T1 cards also have some knowledge of configuring dial pears.
Thanks.

Ok, this was the 2nd thing I was just about to recommend, and that was to not Trunk due to the E1/T1 limitation and just terminate and route everything H323. Both sides are CAS, just one is E&M Immediate and the other is R2-Digital. Unlike the 1st document I linked you are not trunking the connections you are using a PLAR to a voice-port. Essentially you are using a H323 dialplan to do this in a limited fashion.
Unfortunately CAS doesn't support ANI unless you use FGD or FGD-EANA on the T1 side Router and PBX. Not totally sure on the R2 side but I believe you need to configure your PBX and R2 router to use R2-Digital Compelled, non-compelled or semi-compelled to get ANI information on that side.
Reference these documents.
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800e2560.shtml
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800943c2.shtml
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tdia_r/dia_d2ht.htm#wp1010243
Please rate any helpful posts
Thanks
Fred

Help in the configuration of SAPCRM BP to EP 6.0 SP2

Hi all,
Need some Help on the configuration of the CRM Business Package 6.0.2.2. to EP 6.0 SP2. I am following the guide for the same given on SAP HELP. I have activated the required BSP Services : crm_bsp_frame etc.
And i have assigned the Account Manager role to one of the portal users. I have also configured the backend role to the backend user to which the portal user is mapped.
Now, iam able to see the Account Manager's top and detail level navigation in the portal, but iam not able to see the iviews in it. The error is as below:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL 'http:///sap/bc/bsp/sap/crm_bsp_frame/entrypoint.do' is not valid! Please check the protocol and host entries for system 'SAP_CRM'..
See the details for the exception ID in the log file
The SAP_CRM system that i have defined is fine. SInce iam able to create an SAP Transaction iview out of it successfully.
Any pointers regarding this will be very useful. Thanks

Hello Mr. Ramaya,
Your SAP_CRM system definition is missing the entries for web application server. Check your system definition. This is why in following url your host and port are missing.
<b>'http:///sap/bc/bsp/sap/crm_bsp_frame/entrypoint.do'</b>

Help required in configuring telnet

Hi,
We have two PIX 515E firewalls working in HA mode.
I wanted to configure telnet access to firewalls from outside interface.
PIX version is 6.3(5)
I kept PC outside to outside interfaces.
PIX outside IP is 10.10.200.3, inside IP is 10.10.202.5 corresponding virtual IPs are 10.10.200.2 and 10.10.202.7
I have tried following configurations:
pix(config)#telnet 0 0 inside
pix(config)#telnet 0 0 outside
pix(config)#telnet 10.10.200.0 255.255.255.0 outside
pix(config)#telnet 10.10.202.0 255.255.255.0 inside
pix(config)#telnet 10.10.200.200 255.255.255.255 outside
I am able to telnet from internal interface side using inside ip address.
But from outside test pc with IP 10.10.200.200 I am not able to telnet to PIX.
I enabled logging console 5.
when I tried to telnet to outside virtual IP it is not showing any traffic to firewall.
If I try to outside interface I am able to see the traffic like
packets received from source 10.10.200.200 to 10.10.200.3
any help in this configuration. I wanted to telnet firewall from test pc.
Regards
SKRAO

HI SKRAO,
from security reasons is not possible to telnet to outside interface there is no way how to permit this you need you ssh instead of telnet
here is more info about setting ssh
http://www.ciscopress.com/articles/article.asp?p=25342&seqNum=3&rl=1
M.
Hope that helps rate if it does

Help required in configuring counting rule

I have limited experience in SAP-HR configuration. Kindly help me quota configuration. The client has only absence type u2013 Earned Leave. The leave rule is the same for all the employees. The leave rules are:
1.     The employees are credited with earned Leave on Jan 1 every year, for the attendance days put in during the previous calendar year.
2.     The employee is eligible for Earned Leave only if he has attendance for at least 240 days during the previous year. If the employee has joined the company during the middle of the previous year, then he should have attendance for at least 2/3 of the remaining working days during the year.
3.     The employee should be credited with 1 day EL for every 20 working days. If the employee, for example, has worked for 268 days during the year then he should be credited with 13 days EL (268/20=13, with 8 days as remainder). The remainder days, if any, should be carried forward to the next year and considered at that point as added to the number of working days. E.g. employee has worked for 268 days in year 2010. He will be credited with 13 days EL on 1 Jan 2011. Assume he has worked for 256 days in year 2011. Then while creating the absence quota for EL on 1 Jan 2012, the system should consider working days as 256 (from year 2011) + 8 (remainder from year 2010) = 264. Hence the employee should be credited with 13 days of EL on 1 Jan 2012 (264/20 = 13 days; 4 days remainder).
4.     Leave carry forward rules: The employee is allowed to carry forward the EL balance to the next year. However, after carry forward the total balance should not go beyond 30 days. Any thing in excess of 30 days will get lapsed, if it is not encashed.
Kindly let me know how to configure the counting rule & the deduction rule for the above scenario.

Hi
Configuring of EL need PCR Calculation and Standard Configuration with time Types
000010            D VARSTCURMO
000020 **           COLOP*
000030 04         D VARSTFDYPP
000040 04 N
000050 04 Y       D HRS=0     HRS=FR11C HRS?300
000060 04 Y *
000070 04 Y <     D HRS-300   HRS*-1    ADDDB9509 ADDDB9558 HRS?15
000080 04 Y < *   Z HRS=0     HRS=M9500 GCY ZAC2
000090 04 Y < <   Z GCY ZAC3
this when u go for GCY ZAC2
           D HRS?10
         D HRS/10    ROUNDH<60HHRS?CELACR
*        D HRS-CELACRHRS?0
* *        HRS*-1    ADDDB9501
* >        HRS=0     ADDDB9500ZADDMB9500ZADDDB9501ZADDMB9501Z
>          HRS=0     ADDDB9500ZADDMB9500ZADDDB9501ZADDMB9501Z
<            HRS=0     HRS=CELACRADDDB9501 HRS=0     ADDDB9500ZNEXTR A
<        A   ADDMB9500Z
This when u click ZAC3
000010            D HRS=0     HRS=M9500 HRS?10
000020 *            HRS/10    ROUNDH<60HADDDB9557 HRS-D9509 ADDDB9556 NEXTR A
000030 *        A D HRS*-1    HRS?0
000040 * *          COLOP*
000050 * >          ADDDB9501 HRS=0     ADDDB9500ZADDMB9500ZADDDB9509ZNEXTR A
000060 * >      A   ADDMB9509Z
000070 <            HRS=0     HRS=M9509 ADDDB9501 HRS=0     ADDDB9500ZNEXTR A
000080 <        A   ADDMB9500ZADDDB9509ZADDMB9509Z
This PCR is for EL with 300 Limit
Regards
Raja Sekhar

Please help me to configure 2504 WLC as secondary in N+1 HA mode. My primary WLC is 5508 and both have 50 AP license.

Please help me to configure 2504 WLC as secondary in N+1 HA mode. My primary WLC is 5508 and both have 50 AP license. I want to deploy the AP in the same location.

Go HERE: https://supportforums.cisco.com/discussion/12219106/high-availibility-2500

Can anyone help me in configuring the reports server

Can any one help me in configuring report server to personal web server on Windows NT 4.0 sp4 environment.

Hi.
One way of searching for tables that contains specific fields is use transaction ST05 (Performance Analysis) and then turn on the trace function.
If you know some program that has a component (textbox, select-option, parameter, label, radiobutton, etc) that reffers to the field desired (or even just use it in the internal logic), in your case 'charg', you'll be able to check in a report what tables were used while the trace was on.
Search about ST05 and its trace function. It's very simple and very useful to find tables.
Edited by: Fabio Luiz Esperati Pagoti on Sep 29, 2009 7:40 PM

Need help on struts configuration with ColdFusion 10 using IIS

We need help on struts configuration with ColdFusion 10 using IIS.
Earlier we were using ColdFusion 8 with IIS 6 for one of our application. This application internally calls struts. After upgrading to ColdFusion 10 struts calls are not loading. We get 404 error.
In ColdFusion 8 struts were configured using actions extension .do in IIS from this file-
C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll.
But in ColdFusion 10 this file is not present as ColdFusion 10 uses Tomcat in place of Jrun.
Also there is no information in ColdFusion log file.

Duane wrote:
doctormirabilis, Welcome to the discussion area!
1) how can i configure the time capsule in order to operate as a remote base station synchronizing with the relay using the ethernet port?
Configure the Time Capsule to act as a bridge (not distributing IP addresses). Also configure the Time Capsule to create an 802.11n wireless network with a unique network name (SSID). That's it.
2) how can i avoid that my powerbook while accessing my wireless network does connect through the relay station instead of using the time capsule?
Configure the Time Capsule to use a different network name than the WDS link between the 2 AirPort Express (AX). Configure the PowerBook to use the Time Capsule network.
There are 2 pieces of information that you should be aware of...
(1) None of the PowerBooks are capable of 802.11n.
(2) The WDS link cuts your available bandwidth in half. So the wireless link to your neighbor's has a maximum potential of 27 Mbps.
Let's for a minute assume that you have a Mac compatible with 802.11n. In your configuration the time you could take advantage of the 802.11n speed is when the Mac is sending/recieving data directly from/to the Time Capsule.
There would be NO speed increase in Internet access. The speed of Internet access is going to be controlled by the slowest link in the path to the Internet. That is probably the connection to the ISP. The next slowest path is the WDS link to your neighbor's.
Duane,
I am in a similar situation, sharing internet with my neighbor. Do you think it would be plausible to hook up a vonage phone adapter to time capsule's ethernet port if time capsule is bridging from my neighbor's router in the configuration you have described? A check of my upload speed shows 1.67Mbps (powerbookG4 w/ airport extreme). Vonage reccommends 90kbps minimum upload speed. Am I going to lose some speed putting the Vonag adapter behind time capsule?
Thank you

WAP4410N Help on to configure dhcp OR dhcp CLIENT

Help on the config. WAP4410N
WAP4410N Help on to configure
HI Guys,
I have 2 Wireless Access Points WAP4410N. Iam very new in Using these Wireless ACCESS points. initial configuration I have done with the help of Starting guide. Here i want to know few things
1) Is these can be configured By CLI mode as of now i used GUI mode.
2)i want to give connected users of wifi from the DHCP loop created in L3 switch (is a DHCP server). where wifi point is connected to a port of L3 switch.
3) How can i give connected wifi users from DHCP Pool with different ip adress subnet to internal users and guests. is this can be configured here on product i have or not?
if yes . can you please exlain me or gvve me detaiuled stuff.
4) I Want to give access to my employees internal server through WI-fi . where i have L3 switch connected to a server gi 1/0/1 (10.10.10.10) and wifi at port gi 1/0/2. how can segregate or seperate the internal user employees with access to servers and gust users directly access internet through gateway 10.10.11.1 connected to L3 switch. where wifi port has to be given a different VLAN no.
wifi-----------------------L3 switch--------------------------router
server

Hello all
I had an issue.
, added SSID with different VLan numbers. everything went good. i can access the WAP but couldnt connect to internet where i can ping from connected WAP to Gateway of our network . but couldnt connect to internet.
the status on the connected WAP says. Limited access. No internet access.......
Any help guys. is there any problem with my laptop searched through online restarted the Netsh service of TCP and all .. but lost couldnt connect to internet and the status still shows No internet access..\\
Really ****** on with WAP4410N working with it from 4days. atlast connected to WAP and the new issue arises with no internet access...
Thanks
srikanth

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

Recommend a good reference book and helpful links to configure ACS 5.x

Hi Experts,
I am new to Cisco ACS, Can anyone recommend me a good reference book and helpful links which will help me to configure ACS 5.x
Thanks In Advance
Kiran Kumar CH

Hi Klaus,
I found the Cisco Press book "AAA Identity Management" to be a good reference when I was getting started with ACS 5.x.
http://www.ciscopress.com/bookstore/product.asp?isbn=1587141442
Good luck,
Nate

UCCX 7 Alarm Configuration

In UCCX 7 alarm configuration if I set the syslong external server
IP address and set filter level say 4 we get all alarms even above 4.
We get 1 through 7. Has anyone played with the larm level and successfully has
received in the remote syslong server only the levels needed? Also if you have used
the SNMP traps and MIBs successfully could you explain which one worked.
I am referring to the serviceability guide for 7 but not clear if all SNMP configuration is covered.
Thanks.

The three accounts you mentioned there are Application Users, not End Users. As such they will not exist in Active Directory. The CCX installation documentation will instruct you to create the AXL account with Super User rights. CCX will then create the second two accounts for you.
Installation Guide for Cisco Unified CCX and Cisco Unified IP IVR, Release 7.0(1)

Please help me in configuring Lean warehouse

Hi Friends,
Can any body help me in configuring Lean warehouse.
Kindly give me step by step configurationplease.
Thanksinadvance.your help is considered valuable
Regards,
William

Hi,
Please find below :
[IMG] Enterprise structure\ Definition\ Logistics Execution\ Define, copy, delete, check warehouse number
[IMG] Logistics Execution\ Shipping\ Picking\ Lean WM\ Control "Plant/Storage loc/Warehouse no" Assignment
[IMG] Enterprise Structure\ Assignments\ Logisitics Execution\ Assign warehouse number to plant/storage location
[IMG] Logistic Execution\ Shipping \ Picking\Lean WM - Define control parameters and number ranges f. warehouse no
[IMG] Logistic Execution\ Shipping \ Picking\ Lean WM\ Define Storage Type
[IMG] Logistic Execution\ Shipping \ Picking\ Lean WM - Define Picking Areas
[IMG] Logistic Execution\ Shipping \ Picking\ Lean WM - Define Transfer Types
[IMG] Logistic Execution\ Shipping \ Picking\ Lean WM - Define Movement Types
[IMG] Logistic Execution\ Shipping \ Picking\ Lean WM - Define Difference Indicators
[IMG] Logistic Execution\ Shipping \ Picking\ Lean WM - Define Print Control
[IMG] Logistic Execution\ Shipping \ Picking\ Lean WM - Control "Plant/Storage Location/Warehouse No." Assignment
Regards,
w1n

New to Oracle - could really use help with memory configuration

I'm new to Oracle and am assuming the support role on a system that is using Oracle 8.1.7 as the database server and need help with memory configuration.
The server is being used with FileNet and we're having issues while trying to purge logs (purge never completes) and the disk drive activity LED is on almost solid. My guess is is that it's not using enough/doesn't have enough memory therefore constantly reading off the disk and going too slow to finish the purge between nightly backups in which the database service is stopped.
The server is running on Windows 2000 Server SP4, has 1G of RAM and is dual-Xeon processor.
Any help or starting point references would be greatly appreciated.

Hi ...
You can use a StatsPack for guess the best distribution memory with your DB needs.
See metalink Note:228913.1
Regards

Help Agenda alarm configuration

Similar Messages

Maybe you are looking for