Help - all pages blocked (except BT pages)

Just started happening. From my desktop which is wired conn to my HH4.
When I try to connect anywhere I get a "You're seeing this page because BT Parental Controls is active and you are attempting to connect to a DNS server outside of our network.
You may have selected a different server in your network settings or installed an application that uses an alternative service." message
I don't have parental controls activated and I can access these pages from my iPad over wifi.
I don't know if it's a PC issue/infinity issue or whatever but I would be really grateful if anyone can help me out on this cos it's driving me nuts this morning. All was OK last night and nothing has been loaded or installed (not intentionally, anyway!)
I have tried setting the connectoid to auto dns as well as the google setting which I was advised to use recently but no change.
Any help gratefully received
EDIT: Not ALL pages are blocked - I seem to be able to log on to my bank as well as BT!

Try a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds. I would also set your LAN connection to obtain IP address automatically and DNS setting automatically. Also untick IPv6 if it's ticked.

Similar Messages

I need to print the footer in all pages except last page.

Hi,
I'm working on PO RTF template. I got one probelm, I need to print the footer in all pages except last page.
Can someone help me in this.
Thanks in advance.
Venki.

This question has been answered already multiple times - please search the forum before posting a question - in case you did and you didn't find it - we added a feature
in 5.6.2 to solve this problem - It is described in the user guide in the RTF template section search for start@last-page:
Last Page Support
XML Publisher now has the ability to show content only on the last page. This is useful for documents such as checks, invoices or purchase orders where you want want content such as the check or a summary in a specific place only on the last page.
The basic command is:
<?start@last-page:body?>
<?end body?>
http://forums.oracle.com/forums/search.jspa?threadID=&q=%40last-page&objID=f245&dateRange=last90days&userID=&numResults=15&rankBy=9
Any content above or below these two tags will only appear on the last page of the document.
Hope that helps,
Klaus

Delete all pages except currently viewed?? Acrobat Javascript

Hello All,
I need to delete all pages in a PDF except the one that is currently being viewed. I thought I had it with this:
var keepPage=this.pageNum
this.deletePages({nStart: keepPage+1, nEnd: this.numPages -1});
var keepPage=this.pageNum
this.deletePages({nEnd: keepPage -1});
But this only works if you are on a page other than the last page.
I appreciate any help.

Thank you so much. I had done this:
var keepPage=this.pageNum
if
(this.numPages -1 > keepPage)
this.deletePages({nStart: keepPage+1, nEnd: this.numPages -1});
var keepPage=this.pageNum
this.deletePages({nEnd: keepPage -1});
Which worked, but would give a:
TypeError: Invalid argument type.
Doc.deletePages:8:App Delete_other_pages:Exec
===> Parameter nEnd.
in the console if you were on page 1.
Yours is clearly done by somebody who knows better. I'll put this in an AcroButton and be in business. Best.

How to apply template page to all pages except for logon page?

Hi,
I created a template page with id 0 that contains some copyright and other basic information of my application. Is there a way to apply this to all pages within my application except for the logon page?
Regards,
Tamas

It's possible to make page items or regions conditional on the page not being a page number that you specify.
Head to your page 0, and look for the relevant item in your conditionals list. Select it and specify your login page number in there and all should be well!
Ben

I canno't see the menu:file;help;tools;downloads,they dessapear,how to show them back?Also,what's the tastature tab for forward/back and minimizing all pages at once?I am speaking for mozilla latest version under win 7

I canno't see the menu:file;help;tools;downloads,they dessapear,how to show them back?Also,what's the tastature tab for forward/back and minimizing all pages at once?I am speaking for mozilla latest version under win 7

I canno't see the menu:file;help;tools;downloads,they dessapear,how to show them back?Also,what's the tastature tab for forward/back and minimizing all pages at once?I am speaking for mozilla latest version under win 7

Help me stop Safari showing souce code for all pages

Safari has been doing this for all pages including apple.com
The only change to the system was the new combo update. Now I'm using Firefox. Can someone give me a reason to go back to Safari?

I better add that this also affects any of the help windows for other products. Many times I just get a long line of the different help topics without formatting. It is very annoying that i cannot read the Hlep menus properly. Can anyone help me please?

I am unable to print "ALL Pages" using the Adobe Print plugin in Firefox, only the first page gets printes. however IE works perfectly fine.Please advise. Is it some way that firefox identifies the complete web page..? PLease help

I am unable to print "ALL Pages" using the Adobe Print plugin in Firefox, only the first page gets printes. however IE works perfectly fine.Please advise. Is it some way that firefox identifies the complete web page..? PLease help

Does the entire webpage appear in Print Preview? <br />
File > Print Preview

Help on Page

I have created a User Guide using Framemaker. The user guide is converted through Distiller to a pdf w/ bookmarks and Destinations. We have an Application Context properties file. All of our users are able to go into our web application, go to the desired, tab or site and click Help on Page, and the user guide opens to the desired page. It works for every user except one. The user selects Help on Page and the user guide opens on the cover page. I know that it has to be something related to the user's particular profile, it is probably related to Internet Explorer, but all of the settings seem to be the same. I can't figure out why the Destinations are not working on her machine. I have been trying to do research. So far, nothing. Please help.

The plugin being invoked is Adobe PDF. It has some configuration options, but the options selected on the user's browsers are not different than mine. We had a different user log onto the machine, and she was able to use the Help on Page. However, she had trouble with it when she went back to her own machine. This is the craziest issue that I have seen in a while, and I can't seem to find much information about it on the internet.

Fireworks CS6 export all pages as PDF crash

I cannot for the life of me Export all pages as pdf from FW CS6 on my Mac. All software is fully up-to-date. I have many times Exported scucessfully before, but now the same file is no longer exportable. I'm going crazy. The source PNG file is a 15 MB file of 68 pages, it is filled with hotspots that should export an interactive PDF. (I deleted all of the "unused library symbols" (even though that deletes symbols that are actually in use)). My Mac is a PowerMac 8GB RAM... I can't remeber the processor setup... I can tell you later when I'm at work...
I have been using FW since late 90s. FW crashes a dozen or more times a day these days. I'm tired of fighting it. Adobe has frankly been woeful in updating FW (on the Mac at least). It is an excellent product... but at best an unfinished product. I've sent bug reports through official channels for years and every year Adobe fails to fix them. It is quite shocking really.
I hope I can get a quick answer, or else my job will become much more difficult.

Here's a partial Crash output, let me know if more would help:
Process:         Adobe Fireworks CS6 [5239]
Path:            /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app/Contents/MacOS/Adobe Fireworks CS6
Identifier:      com.macromedia.fireworks
Version:         Adobe Fireworks CS6 version 12.0.0.236 (12.0.0)
Code Type:       X86 (Native)
Parent Process: launchd [163]
User ID:         502
Date/Time:       2013-02-05 17:33:03.564 -0500
OS Version:      Mac OS X 10.8.2 (12C60)
Report Version: 10
Interval Since Last Report:          95268 sec
Crashes Since Last Report:           72
Per-App Interval Since Last Report: 84851 sec
Per-App Crashes Since Last Report:   17
Anonymous UUID:                      EDC2114F-8AD4-DC55-0A2A-EC60302FB1F0
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib                  0x9856fa6a __pthread_kill + 10
1   libsystem_c.dylib                       0x935caacf pthread_kill + 101

Blocking all MAC addresses except for the ones you allow

I have a Cisco Aironet 1200 Access Point. I want to block all MAC addresses from accessing the access point, except for the ones I've allowed. First I went to the Address Filters page and clicked on Allowed, then listed all the MAC address I want to be able to access the access point. Then I went to the Ethernet Advanced page, and set the Default Multicast Address Filter to Disallowed, and the Default Unicast Address Filter to Disallowed. Then I went to the AP Radio: Internal Advanced page, clicked on the Advanced Primary SSID Setup link, and set the Default Unicast Address Filter to Disallowed. Accept Authentication Type is set to Open with Shared and Network-EAP cleared, and the Require EAP check boxes are all cleared.
When using a computer whose MAC address is not listed on the Address Filters page, I am still able to connect to the network through the access point. I am also able to connect to the access point from any pc on my network by entering its IP address in Internet Explorer.
What do I need to do to block any pc without a listed MAC address from connecting to the access point?
Thanks, Jeff

Here's the instructions and URL on how to create an MAC based filter:
Follow these steps to create a MAC address filter:
Step 1 Follow the link path to the Address Filters page.
Step 2 Type a destination MAC address in the New MAC Address Filter: Dest
MAC Address field. You can type the address with colons separating the character pairs
(00:40:96:12:34:56, for example) or without any intervening characters (004096123456, for example).
Note If you plan to disallow traffic to all MAC addresses except
those you specify as allowed, put your own MAC address in the list of allowed MAC
addresses. If you plan to disallow multicast traffic, add the broadcast MAC address
(ffffffffffff) to the list of allowed addresses.
Step 3 Click Allowed to pass traffic to the MAC address or click Disallowed
to discard traffic to the MAC address.
Step 4 Click Add. The MAC address appears in the Existing MAC Address
Filters list. To remove the MAC address from the list, select it and click Remove.
Step 5 Click OK. You return automatically to the Setup page.
Step 6 Click Advanced in the AP Radio row of the Network Ports section at
the bottom of the Setup page for the radio you want to configure. The AP Radio Advanced page appears.

How to make the common control button for all pages in TABCONTROL?

Dear all,
I'm using TABCONTROL for my application. I'm having STOP and SAVE control. I have to show this button to all pages in TABCONTROL.. How do i make it?
Kindly help me?..
Regards,
Srinivasan.P
Solved!
Go to Solution.

Hi srinivasan,
If you want to keep "Save" and "Stop" common, Why do you want to keep them on Tab control? Is your tab control taking entire space on Front panel? If so, you can have SAVE and STOP on other vi, and you can call this vi (MODAL).
Gaurav k
CLD Certified !!!!!
Do not forget to Mark solution and to give Kudo if problem is solved.

Redirecting all pages from old URL to index page of new URL

Hello everybody..
I have an Apache configuration question, can't work out the procedure in Server Admin.
Basically I have a website at "oldurl.com". In Server Admin, I have the site set to serve a PHP file which runs a 301 redirect to "newurl.com". Works nicely.
Trouble is, if somebody requests "oldurl.com/somepage", the 301 redirect does not function.
I need all pages on "oldurl.com" to forward to the homepage of "newurl.com".
I suspect I need to type something into the "URL Aliases and Redirects" pane in Server admin, and some sort of wildcard, but I'm stumped. I have read about fiddling with the .htaccess file, but surely this is not necessary?
Hope you can help. Thank you!

To give a more detailed (and just possibly relevant) example of what koncept's talking about, suppose you wanted to redirect browsers from any page on the old domain to a corresponding page on the new domain (e.g. http://oldurl.com/this/that/theother.html would redirect to http://newurl.com/this/that/theother.html, rather than just http://newurl.com/). You'd make a rule in the oldurl.com site like this:
Type: RedirectMatch
Pattern: (.*)$
Path: http://newurl.com$1
The .* matches zero or more anythings, the $ matches the end of the url (to make sure we get the whole thing, not just part of it), and the parentheses capture the match so we can use it in the redirect path as $1. Note that the pattern is matched against the path part of the original url (i.e. "/this/that/theother.html" in the example I gave earlier), so we can just tack it onto the new domain name and we're set.

Smartform Spool issue - Not pulling all pages

Hi,
I am expecting aorund 2000 pages of spool file with a smartform driver program.
My spooljob is limiting me to only 33 pages and job is still active when i check using SM37.
Anything related to spooling is wrong in my code?
SORT T_ITEM BY FKDAT.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      FORMNAME           = P_FORM
    IMPORTING
      FM_NAME            = FM_NAME
    EXCEPTIONS
      NO_FORM            = 1
      NO_FUNCTION_MODULE = 2
      OTHERS             = 3.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LS_COMPOSER_PARAM-TDNEWID = 'X'.
LS_CONTROL_PARAM-PREVIEW = ''.
SORT T_HEADER BY NAME1 KUNNR.
DATA: V_PREV_CUR LIKE BSID-WAERS.
LOOP AT T_HEADER INTO WA_HEADER.
    REFRESH: ITEM_ITAB, ITEM_ITAB_TMP.
    CLEAR: V_PREV_CUR.
    LOOP AT T_ITEM WHERE KUNRG = WA_HEADER-KUNNR.
      MOVE-CORRESPONDING T_ITEM TO ITEM_ITAB.
      APPEND ITEM_ITAB.
    ENDLOOP.
    SORT ITEM_ITAB BY WAERS.
    LOOP AT ITEM_ITAB.
      IF SY-TABIX <> 1.
        IF V_PREV_CUR <> ITEM_ITAB-WAERS.
          SORT ITEM_ITAB_TMP BY FKDAT.
          CALL FUNCTION FM_NAME
            EXPORTING
              ARCHIVE_INDEX        = TOA_DARA
              ARCHIVE_INDEX_TAB    = ARC_IND_TAB
              ARCHIVE_PARAMETERS   = ARC_PARAMS
              CONTROL_PARAMETERS   = LS_CONTROL_PARAM
              MAIL_APPL_OBJ        = LS_RECIPIENT
              MAIL_RECIPIENT       = LS_RECIPIENT
              MAIL_SENDER          = LS_SENDER
              OUTPUT_OPTIONS       = LS_COMPOSER_PARAM
              USER_SETTINGS        = SPACE
              WA_ITAB              = WA_HEADER
            IMPORTING
              DOCUMENT_OUTPUT_INFO = DOCUMENT_OUTPUT_INFO
              JOB_OUTPUT_INFO      = JOB_OUTPUT_INFO
              JOB_OUTPUT_OPTIONS   = JOB_OUTPUT_OPTIONS
            TABLES
              WA_DEP               = ITEM_ITAB_TMP
            EXCEPTIONS
              FORMATTING_ERROR     = 1
              INTERNAL_ERROR       = 2
              SEND_ERROR           = 3
              USER_CANCELED        = 4.
          IF SY-SUBRC <> 0.
            WRITE: / 'ERROR in passing variables to the smartforms '.
          ENDIF.
          LS_COMPOSER_PARAM-TDNEWID = SPACE.
          LS_CONTROL_PARAM-NO_DIALOG = 'X'.
          LS_CONTROL_PARAM-PREVIEW = ''.
          REFRESH ITEM_ITAB_TMP.
          MOVE-CORRESPONDING ITEM_ITAB TO ITEM_ITAB_TMP.
          APPEND ITEM_ITAB_TMP.
        ELSE.
          MOVE-CORRESPONDING ITEM_ITAB TO ITEM_ITAB_TMP.
          APPEND ITEM_ITAB_TMP.
        ENDIF.
      ELSE.
        REFRESH ITEM_ITAB_TMP.
        MOVE-CORRESPONDING ITEM_ITAB TO ITEM_ITAB_TMP.
        APPEND ITEM_ITAB_TMP.
      ENDIF.
      AT LAST.
        CALL FUNCTION FM_NAME
          EXPORTING
            ARCHIVE_INDEX        = TOA_DARA
            ARCHIVE_INDEX_TAB    = ARC_IND_TAB
            ARCHIVE_PARAMETERS   = ARC_PARAMS
            CONTROL_PARAMETERS   = LS_CONTROL_PARAM
            MAIL_APPL_OBJ        = LS_RECIPIENT
            MAIL_RECIPIENT       = LS_RECIPIENT
            MAIL_SENDER          = LS_SENDER
            OUTPUT_OPTIONS       = LS_COMPOSER_PARAM
            USER_SETTINGS        = SPACE
            WA_ITAB              = WA_HEADER
          IMPORTING
            DOCUMENT_OUTPUT_INFO = DOCUMENT_OUTPUT_INFO
            JOB_OUTPUT_INFO      = JOB_OUTPUT_INFO
            JOB_OUTPUT_OPTIONS   = JOB_OUTPUT_OPTIONS
          TABLES
            WA_DEP               = ITEM_ITAB_TMP
          EXCEPTIONS
            FORMATTING_ERROR     = 1
            INTERNAL_ERROR       = 2
            SEND_ERROR           = 3
            USER_CANCELED        = 4.
        IF SY-SUBRC <> 0.
          WRITE: / 'ERROR in passing vars to the smartforms '.
        ENDIF.
        LS_COMPOSER_PARAM-TDNEWID = SPACE.
        LS_CONTROL_PARAM-NO_DIALOG = 'X'.
        LS_CONTROL_PARAM-PREVIEW = ''.
      ENDAT.
      V_PREV_CUR = ITEM_ITAB-WAERS.
    ENDLOOP.
ENDLOOP.

Hi Vara,
By default there will be a value set by the administrator for the number of pages you can view in the spool. So to me it looks like this value is set to 33 in yoru case. You can go to setting from the same screen and change thsi setting to display all pages. But beware that this may take a long time some times and also give you a dump at times.
-Guru

Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages. Thanks again.

Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages.
Thanks again.
PS Are you working on a version for the iPad and iPhone with Add Blocker? That would be great!

Here are some zoom add-ons which might provide a workaround:
[https://addons.mozilla.org/en-US/firefox/search/?q=image+zoom&cat=all&x=0&y=0 Image Zoom]
As regards your question about iPad and iPhone, you'd be better off posting that question here: [https://forums.mozilla.org/addons/ Mozilla Add-ons Forum]
P.S. ''Apologies for not responding earlier''.

Print write stat at end of all pages in report

Hi,
I want to print write stat at end of all pages in report.
Thanks,
Asha

hi ,
u can use End-of-Page event to print write statement at ever end of the page.
for Ex:
Report ztest line-count 8(3).
start-of selection.
loop at itab...
write:/ .........
endloop.
end-of-page.
write:/ "end of page'.
revert back if any issues.
reward with points if helpful.
regards,
naveen.

Help - all pages blocked (except BT pages)

Similar Messages

Maybe you are looking for