Help: An error when I initial the planning areas:internal error
Hi,
An error when I initial the planning areas, I create time series objects for planning area DP01, system show an error message to me as follow:
internal error [/SAPAPO/OM_TS_TGRID_CREATE]
Message no. /SAPAPO/TSM099
Thanks,
Thomson
Hi Thomson,
I think in planning area you did not only add the time series key figures
to the planning area but also defined key figure semantics for those
key figures. This must not be. To see those semantics you can check
the key figure details in transaction /SAPAPO/MSDP_ADMIN on the
key figure tab by selecting key figure details. For the time series
keyfigures, the semantics column is filled with values like 300, 301,
etc. If you wants to use time series key figures in addition
to the standard SNP-key figures, the semantics field has to be empty.
You can compare that with the settings in the other planning area where
everything is working fine.
If this is not the case then please refer the below note and execute the consistency reports as in note:
577038 Data inconsistencies in SNP
Regards,
Sunitha.
Similar Messages
-
Error when I open the new help in FCP7
I get a error when I open the new help in FCP7:
The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.I have checked that Javascript was enabled in Safari (and it is).
I can read the documentation in Safari online using this link: http://documentation.apple.com/en/finalcutpro/usermanual/
I have now tried all the new/updated programs in the FCS3 suite they all have the same problem:
The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.
Mikael -
Error when I deployed the java EAR application in NWDS 7.1
HI All,
I got the error when I deployed the java EAR application in NWDS 7.1 version..help me out...........................................
com.sap.ide.eclipse.deployer.api.APIException: DeployException,cause=[ERROR CODE DPL.DCAPI.1023] AuthorizationException.
Reason: , An error occurred during the deployer retrieval. Cause =[ERROR CODE DPL.DC.3151] The user LJ4PJW could not be authorized, because doesn't own the (com.sap.engine.interfaces.security.ServiceAccessPermission dc) permission for deploy controller. at com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
Thanks
CostaThe user LJ4PJW could not be authorized, *because doesn't own the* (com.sap.engine.interfaces.security.ServiceAccessPermission dc) *permission for deploy controller. a*t com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
The user is not have proper authorizations. Use some other administrators user id which has all admin roles and authorizations assigned and try to deploy.
Regards,
Ravi -
Error while initializing the work area SYST
Hi Experts,
we did a kernel upgrade in NW 2004 from Kernel 640 to Kernel 700.
OS : UNIX DB: Oracle
At Os Level SAP and Oracle started.
when we try starting the SAP,
it shows the following error : error while initializing the work area SYST
Thanks in Aavance,
Satish T.> Did you get the solution for this? if so, could you please share the same with me. I also got same error after installing the SAP. From OS level everything looks fine but getting the same error while trying to login from SAP GUI as you reported.
The answer is simple: Use the proper kernel
If this is a new installed system and you can't logon please post the logfile dev_w0 here.
Markus -
When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?
Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles. -
Error when i release the biling dcoument to accounting in VF02.
Dear All,
I am getting the following error when i release the biling dcoument to accounting in VF02.
Kindly help me in getting the solution
Document date / / is incorrect in item 0000000001
Message no. F5 833
Diagnosis
Service financial accounting: document date " / /" is technically incorrect in item "0000000001" of the accounting document.
System Response
System erro in the calling application.
Procedure
Contact your consultant or SAP directly.
With Regards
Azeez MohdRefer SAP Note 1635985 - FBCJ: Document date not a required input field.
Also, refer following SDN thread - Error F5 833 Document date 00/00/0000 is incorrect in item 000000000
Regards
JP -
I keep getting errors when updating from the Creative Cloud (49)
I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
There is an Error when I save the Indesign file!
There is an Error when I save the Indesign CC file!
Cannot save it after opening for awhile!
It makes me lost all my work!
[expletive deleted] Indesign!
Message was edited by: Peter SpierYeah, sure, swearing will help you.
Instead rather give important information, unless you just came here to complain and not wanting to ask for help.
1. What error?
2. Where is the file saved - local HDD or network?
3. Will "Save as..." work?
4. When closing ID and opening again, it should restore the files (data loss due to crash prevention) - will you then be able to save? -
I get a error when i open the criteria of a Alert subscription
Hi All,
I get this strange error when i open the criteria of a Alert subscription.
Below is the screen shot of the error and the contents of the alert.
Can any one help.
Note: The following information was gathered when the operation was attempted. The information may appear cryptic but provides context for the error. The application will continue to run.
Id='' -- Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).Id='' -- Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Id='' -- Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.AddParameter(SqlCommand sqlCommand, String parameterName, ColumnDefinition columnDefinition, Object parameterValue, Boolean stronglyTypeParameter)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateNextOperand(XmlReader criteriaReader, String parameterBaseName, SqlCommand sqlCommand, QueryDefinition queryDefinition, ColumnDefinition columnDefinition,
Boolean stronglyTypeParameter)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.NextPredicateWithPropertyOperatorAndOperand(StringBuilder criteriaStringBuilder, SqlCommand sqlCommand, QueryDefinition queryDefinition, ColumnDefinition columnDefinition,
String propertyName, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicate(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateGroup(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.CreateCriteriaTextAndParameters(SqlCommand sqlCommand, QueryDefinition queryDefinition, XmlReader criteriaReader, XmlNamespaceManager xmlNamespaceManager)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlCommandBuilder.CreateCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, String criteriaXml, Dictionary`2 parameterValues)
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.CreateSqlCommandForSelectType()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.DataAccess.ExecuteQuery(String queryDefinitionName, String criteriaXml, Pair`2[] parametersAndValues, String inClauseColumnName, ICollection`1 inClauseElements)
Gautam.75801Was any changes made to the Notifications Internal Library MP?
Do you have a recent/latest backup copy for the MP? if yes, you may want to reimport it.
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway -
Error when calling up the application function for hierarchies
Hello,
if I try to load a material class hierarchy and the loading is failing directly in source system with error message "Error when calling up the application function for hierarchies". Did anybody have this problem? I could not find anything iside the forums.
Thanks for your help!
Regards,
ChristianHi,
I have the same problem. Do someone know the solution? What is the problem?
Thanks,
Ángel. -
Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.
in OIM 11g R2
Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c -
Trying to install iTunes on my Dell laptop with Windows 7 - 64 bit. Get these two error messages when I run the iTunes exe file: Error 2 and Error 2 (Windows error 2). Both say Apple Application Support was not found. Can anyone tell me why this is happening?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Error when writing to the Internal Buffer-runtime error during querydisplay
Hi
I am working in BW 3.5. I am trying to run a query in BEx Analyzer but I am getting the following Error
Error when writing in the Internal Buffer see OSS note 156957
I tried for the note but I am not getting relevant information.
Please let me know what to do.
Thanks,
PadmaHi,
please apply the note 1614788. After note implementation, you need to set parameter RSR_HIER_THRESHOLD_EXPORTDB in table RSADMIN via report SAP_RSADMIN_MAINTAIN in transaction SE38.
If you set this parameter to value 50.000 for example, all hierarchies with more than 50.000 nodes will be buffered in the database instead of using the export/import buffer.
To find out the current size of a hierarchy, goto the hierarchy maintenance in transaction RSH1 and copy the hierarchie ID from the header data. With this key you can goto transaction SE16 and select table RSRHIEDIR_OLAP (Field HIEID is the hierarchy ID).
It should resolved your issue.
Thanks,
Venkat -
Error when jumping to the OLTP system
Hi Gurus,
Some data loads are failed, when our BI consultant tries to analyse the issue, he getting the error " error when jumping to the OLTP system " " Screen output without connection to user"
We are using BI and ECC 5.0 as back end system.
Please let us know how to resolve the issu.
Thanks in advance
VJHello,
I have changed user to Dialog user but still the the same issue.
Please guide me how to go ahead.
VJ -
I found an error when I changed the contact information.
I found an error when I changed the contact information.
Yesterday, I imported all my contact information from my old phone to my brand new iPhone 4S at an AT&T store. Everything looked fine, but all the first names and the last names were switched. So, I had to correct all contact information manually again. It was so ridiculous.
When I corrected the contact information, the names on my contact list were not changed immediately. For example, when the name of a person, ‘Doe John’, was changed to ‘John Doe’, the name on the contact list was not changed and remained as ‘Doe John’. After I rebooted my iPhone, the name on the list was changed correctly. Do I have to reboot every time when I switched the first name and the last name?
My iPhone Information
IPhone 4S White 16G
Model: MC924LL
iOS Version: 5.0.1 (9A405)Is ths display order for contacts set the way you want it?
Settings > Mail,Contacts,Calendars > Display Order
Maybe you are looking for
-
Prety much what the question says. HELP!
-
Windows 7 on iMac - Power Button Sleep
My friend has Windows 7 running under Boot Camp on her iMac. She'd like it so that, when she presses the power button on the back of the iMac, Windows 7 goes to Sleep rather than Shutting Down. How can she make this happen? Message was edited by: Reu
-
Assign characteristics to report selection screen in COPA
Hi all, it seems there are 2 ways to assign characteristics to a selection screen of a COPA report: 1. Go to the form, KE35, double click on a column header and assign characteristics here and check the flag for entering variables. It seems I have to
-
Why A Warning in my Print window?
Hi, The image is 12MB, printing full frame to 12x18" on a 13x19'' sheet. Why am I getting a yellow warning triangle on the image in the Print window? And why don't the custom sheet and image sizes stick from one session to the next? Thanks a lot, Rap
-
Derivation Rule - Workbench Transport
We are trying to create derivation rule through transaction KEDR without any values. After creating derivation rule, it is creating workbench transport request eventhough K9RE* table is client dependent. We have different transport routes/groups for