Help: Analyzer and jre 1.4.2_02

I was trying to run Analyzer 6.2.1 client with jre 1.4.2_02 and recieved java.lang.StackOverflowError error on java console while opening a report. Version 6.5 doesn't work too. The applet doesn't run at all (I recieve java.lang.NoClassDefFoundError: javax/mail/Message). Is there any way to make analyzer client working with this java version?

I had the same problem. I figure out that versions 1.4* doesn't work. It apears to work until the command LoadView from the Api Applet is called. The view is not loaded!Now I am using the version 1.3.1.08 with no problems.(of this type, I have many others!).

Similar Messages

  • JRE 1.4.2_02 on solaris: java.lang.error

    Hi,
    I've just installed JRE 1.4.2_02 on a server running Solaris 8. The installation procedure went by without problems/errors (as described on Sun's pages: http://java.sun.com/j2se/1.4.2/jre/install-solaris.html)
    When I try to execute java.exe (i.e: java -version) I get the following error response:
    Error occurred during initialization of VM
    java.lang.Error: Properties init: Could not determine current working
    directory.
    If I log in as root I'm allowed to run java.exe without problems. I'd really appreciate any ideas, views, comments etc. on what might be the problem ...
    /Regards Jennifer Lee

    I've posted this a couple oif other places today as well, but essentially it may help
    I had the 'Error occured ..., VM' problem after installing 1.4.2_01 on Linux under slackware9.1.
    I found the resolution by running 'java -verbose' as root and as a user and comparing the output, as java ran fine for root.
    Turns out that for the user 'java -version' stopped after loading a couple of jars, and as root it didn't.
    These jars in the JAVA_HOME/jre/lib directory only had root read/write permissions. After changing these permissions to all read and root write it worked fine for the user (so far)
    The above may be of some help, but comparing the differences (especially permissions) in running it as root and user with -verbose may help.
    John

  • Difference between Bex Analyzer and Bex WAD

    Hi Every one,
    I am pretty new to SAP, and working on SAP BW Front end.
    I am pretty aware of Bex Analyzer and also Browser, but i always have a doubt about Bex WAD.
    In my present job i talk to the users and take the requirments and create queries in the Bex analyzer which i am comfortable doing it.
    I also know all the features of Analyzer and created quries and also published it on web, and also created workbooks and inserting multiple quries in the workbook etc etc..
    However i have zero knowledge on WAD and how it is useful to me, and as if now i haven't got any requirment from the client for me to create any report in WAD or do some thing in WAD.
    I have gone through SAP SDN help etc but i am not understanding it at all.
    So can any one explain me in a laymans terms what WAD is and how it will be useful to me?
    and also if possible send me link which has got PDF screen shots of what WAD is?
    Points is for sure.
    Regards,
    Ram

    Raj,
    Thanks for the reply, but i still did not get the understanding about WAD. i have studied the link which you sent me.
    I am still not able to understand how it is helpful for people like me,
    See i create my report in Query designer, and i can execute the query in Analyser. and if i want i can execute it in the Web from my query designer, and also i can create chart on the web if i want.And i can Broadcaste it in the Web.
    and also if i want i can create it in the workbook and create chart in that work book.
    Then what is the point of Web Application Designer (WAD).
    See i have created the Query in Designer in Development say Sales report Query on the infoprovider for SD, now what should i do with it in WAD.
    How can i get it in WAD, i went to start> all Programs>Bex> WAD and i logged in to development and a sereen opend. And from here what i can do, i mean how can i open my created query in WAD?
    As you guys know i am new to SAP itself, but i dont see any advantage about WAD, i read all the articals and there i found that i can create Web Items, HTML etc etc, but i already have HTML, when i execute my query from the Designer i get it in Web Browser...
    See my question is simple, i have a query which i have created in the Query Designer, now how can i get it to WAD and after getting it what can i do with it??
    If any one has a screen shots of there pls send me.
    And Sanjeev has sent me a PDF which i saw earlear and i done the same in my WAD but i am not about to get it to work.
    I have given the points to every one but still what i need i did not get yet.
    Regards,
    Ram

  • Errors installing and uninstalling JDK and JRE 5.0 update 6

    I recently removed some older versions of java as they take up alot of space.. now wondering if i should have.
    I uninstalled all version fine, leaving only the update 6 for both JDK and JRE. Now when i try to compile in Jcreator i get the error message:
    'Error : Invalid path, "C:\ProgramFiles\Java\jdk1.5.0_05\bin\javac.exe" -source 1.5 -classpath "C:\Program Files\Xinox
    Software\JCreatorV3LE\MyProjects\Chapter07_Listing03" -d C:\Program"
    Files\Xinox "Software\JCreatorV3LE\MyProjects\Chapter07_Listing03
    @src_chapter07_listing03.txt"'
    I have no javac file in the directory.I did before i unstalled the older updates
    I am getting a windows installer error when trying to install JDK 5.0 update 6, windows installer works when trying to uninstall though. When i try to remove JDK 5.0 update 5, it tells me i all ready have this version installed, and to uninstall through my add/remove utility which is what i am doing! Then if i click ok i get: 'Fatal error during installation' This also occurs when trying to remove update 6. I also get problems with my JRE 5.0 update 6. When trying to uninstall i get the message 'error applying transforms, verify paths are valid' I cannot get rid of these!. It seems to be interfering/linked with installing them aswell.
    PLEASE HELP ME-i just want to compile
    Thank you

    This forum is for Sun Java Studio Creator product only... We'll be happy to assist you anytime if you have trouble installing or using this product. :-)

  • Analyze and optimization

    Hello everyone,
    I'm on this subject for now 3 weeks and i need help.
    I'm trainee in a company where i have to analyze and optimize their GPO as simple as that, I so learn in detail how does this tool work ect and other useful things about Active Directory.
    I learned their 60 gpos (Some rules up to 600 settings...) and their thousands parameters which is essential for me and during my searches i found many many many softwares to detect parameters conflicts or duplicated settings, but after all my tries i'm
    not satisfied today by what i found.
    I used a trial version of GPOAdmin, the GPO Reporting pack from SDM, probably all the Microsoft tools, ActiveAdministrator ect ... I mean all these tools are very powerful and allow many features but i just need something that will find and tell me where
    are all my conflicts on my domain and by this I will correct these settings to have a full capable domain optimized and users won't complain anymore because they'll have a faster logon ect...
    Maybe I don't use the products as i should or maybe it doesn't even exist but it seems very long to analyze all by my self and write every parameter on each object that will be applied and check if there won't be conflict or another GPO for this setting.
    Maybe Powershell can help me on this but I don't know how to use it to.
    So here I am and if you have any idea to help me on the best practice or someone had to do the same job as I have tell me I'll be very happy to receive your information.
    Thanks and sorry for my English.

    > I mean that if there are 10 gpo for the domain and 10 others on children
    > UO, some parameters will be overwritten (Conflict) or the same
    > parameters will be set 5 times (Duplication).
    Yes, that's true. But setting a simple registry key takes a time windows
    cannot even log to the gpsvc.log file. This is from a VM running on a
    desktop system concurrently with 4 other VMs:
    GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 1 =>
    Microsoft.CredentialManager  [OK]
    GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 2 => Microsoft.GetPrograms
     [OK]
    GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 3 => Microsoft.HomeGroup  [OK]
    GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 4 =>
    Microsoft.iSCSIInitiator  [OK]
    GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 5 =>
    Microsoft.ParentalControls  [OK]
    GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 6 =>
    Microsoft.PeopleNearMe  [OK]
    GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 7 =>
    Microsoft.UserAccounts  [OK]
    GPSVC(478.d68) 11:48:19:829 SetRegistryValue: 8 =>
    Microsoft.WindowsAnytimeUpgrade  [OK]
    And even here it takes only about 1 ms average - on a real system, this
    is about 50 times faster.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Content analyzer and browser

    Hi,
    What is Content analyzer and browser and what does the Tcode : RSBICA does...
    Regards,

    Martin
    I used the same document from help.sap.com to configure the setting. I am not sure what needs to be done. I  ran the transactions RSBICA, but no data is shown. I have loaded the DSOs and no data could be extracted.
    Thanks
    Latha

  • Upgrading JDK and JRE in 10.2.0.4 Oracle_Home of 11.5.10.2 EBS ?

    I've tried to find something at Metalink but failed.
    What's the lastest Java Version certified to use with the database ORACLE_HOME (10.2.0.4) in 11.5.10.2 EBS? And what's the procedure to update it?
    There is no hint in note 300482.1 "Overview of Using Java with Oracle E-Business Suite Release 11i" and the Java version related documents.
    I found note 418399.1 "How To Update The Default JDK and JRE Installed In Oracle Database Home 10.1 and 10.2" which states "...When installing a new version it is important that the major version (1.4) remains the same, and you only change the "update" number...." But that note is not EBS related.
    So is there no way to update Java in ORACLE_HOMEs beyond 1.4?
    Thanks
    Martin

    Hi Hussein,
    thx for your help!
    There is no special cause. I'm trying to keep our installations current.
    I thought that I had to update the Database JDK in earlier cases before migrating to autoconfig or before applying MPs. And as Steven Chan wrote something about [the implications of end-of-life of J2SE 1.5 for EBusiness Suite in his blog|http://blogs.oracle.com/stevenChan/2009/06/understanding_j2se_15_endoflife_implications_for_apps.html] I thought that I better should check if I got to update the DB Oracle_Homes, too.
    Martin

  • "Analyze and Fix" issue

    Hi all,
    I'm trying to salvage some footage that was shot in poor lighting conditions.
    It was shot continuously (one take) to a card on an HD JVC camera, which breaks the footage into approximately 14 minutes chunks. The lighting was constant throughout.
    When I imported the chunks into FCP X, and used "Analyze and Fix", 4 out of the 5 clips were adjusted "exactly" the same. The 5th clip (which was the first of the clips sequentially) was adjusted slightly differently. See attached sample. Clip 1 is the oddball clip, while Clip 2 is how the other four came out.
    Unfortunately that fifth clip gave me the best results.
    My question: Why would FCP X give me different "fix" results on that one particular clip, and fix the other four uniformly?
    Please let me know if I need to provide any further info.
    Thanks!

    That really is very poorly lit!  Your subject moves around and thus his skin tone will chage slightly enough to throw the auto-balance off.
    Here's what I'd do.  I'd use the Match Balance function to match all your clips to the one you like.
    http://help.apple.com/finalcutpro/mac/10.0/#verbbd35b3e

  • ABAP and JRE

    Hi,
    Pls explain how ABAP and JRE works  in XI environment ?
    Thx,
    Sofia

    1.
    SAP was developed by ABAP, in which SAP AG developed ABAP and it was and is still is use ABAP to build componentes of SAP. Years to come ABAP will still move on and become more important tool to maintain SAP.
    2.
    ABAP itself is a 4th generation language in which, if you are asking for its compilers, has an interpreter and a processor. There are called ABAP Interpreters and ABAP processors. To understand how both of these mechanism works, you need to understand how does the screen gets it data flow from forms to underlying coding. So ABAP interpreters functions as a means to interprets dialogs and ABAP processor to process syntaxes and others related ABAP objects. That is why we can enable the '/h' to debug screens and abap code. The underlying coding of SAP is a gargantuan piece of artwork.
    So you have it, ABAP has (known as) ABAP interpreters and ABAP processors by ABAP.
    Note : To Anyone to rebutt... Some parts of SAP kernel are written by C++
    3.
    Database is indenpendent in SAP. You can have Oracle, DB2 or SQL Enterprise Server to support SAP's massive or gargantuan data.... but.... SAP still have their own DBMS ... known as SAP DB.
    I hope this helps you...
    Thanks
    William Wilstroth

  • Smoothcam analyzes and then quits.

    I have a Dodeca MacPro with FCS 2 installed. I have attempted to use the smoothcam filter and the computer appears to analyze the file and even starts creating that analyzed file and then stops and deletes the file. I have reset preferences and even reinstalled the whole OS. I am quite familiar with FCP so I have done all the basic stuff I can think of and even the more advanced stuff. My files are in DV format captured right into FCP. PLEASE HELP!!!

    Hi
    Two things gets into my mind
    • free space to be able to work - on start-up hard disk ? How much ?
    • Smoothcam - Has one un-intuitive way of working. It Analyzes the full Capture
    not only the part selected.
    Due to this one get's very long processing times and eventually craches
    Select sceen needed to be stabilized
    Export this as a full Quality QuickTime movie AND Self-containing.
    Re-import this into FCP
    Now Analyze and Stabilize this.
    Yours Bengt W

  • What is the difference between jdk  and jre

    what is the difference between jdk and jre
    plzz tell me in detail

    It's an extremely important skill to learn how to search the web. Not only will it increase your research and development talents, it will also save you from asking questions that have already been answered numerous times before. By doing a little research before you ask a question, you'll show that you're willing to work and learn without needing to have your hand held the entire time; a quality that is seemingly rare but much appreciated by the volunteers who are willing to help you.
    If you've done the research, found nothing useful, and decide to post your question, it's a great idea to tell us that you've already searched (and what methodologies you used to do your research). That way, we don't refer you back to something you've already seen.
    To get you started, here is an excellent resource: The Java� Glossary

  • Whatz the difference between jdk and jre

    i would like to know the difference between jdk and jre.

    Yes JRE is Java Run Time Environment. The java programming language adds the portability by converting the source code to byte code version which can be interpreted by the JRE and gets converted to the platform specific executable ones. Thus for different platforms one has corresponding implementation of JRE. But JRE has to meet the specification JVM (Java Virtual Machine) Concept that serves as a link between the Java libraries and the platform specific implementation of JRE. Thus JVM helps in the abstraction of inner implementation from the programmers who make use of libraries for their programmes.
    The JDK(Java Developmental Tool kit) comes along with java libraries and JVM embedded in it. Apart from these it comes along with the utility tools for byte code compilation "javac", Executing the byte codes through java programmes through "java" and many more utilities found in the binary directory of java. Speaking practically JDK is essential for developers, which comes along with library packages to develop Software programmes. While JRE is minimal set of programmes which executes the java class files developed by the software developers.

  • Oracle Sales Analyzer and Financial Analyzer

    Hi All,
    Where can I download Oracle Sales Analyzer and Oracle Financial Analyzer? Are they part of any module / package?
    Thanks for your help,
    Shailesh

    Above given information is really helpful especially for newbies who wants to retrieve the multidimensional data from sql 2005.
    I would also recommend a book on OLAP and believe me its pretty informative.
    The [book is available on Amazon|http://www.amazon.com/Multidimensional-Data-Modeling-Toolkit-Intelligence/dp/0981775306] & you can buy an e-book directly from the publisher by writing [email protected]

  • How to turn the elements auto analyzer and dynamic link manager off?

    While I was installign the trial version of photoshop cc, a question popped up asking me to turn elements auto analyzer and dynamic link manager off, but I couldn't find them. Please help me

    Terminate the processes in Task Manager/ Activity Monitor.
    Mylenium

  • I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D.  I have tried to go to help updates, and the software says that it is "Up to Date".  However, if I view the plug-in, it says that Camera R

    I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D.  I have tried to go to help > updates, and the software says that it is "Up to Date".  However, if I view the plug-in, it says that Camera Raw is only version 7.1.  I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW!  Please Help!

    Did you fix your issue?  I am having the same one

Maybe you are looking for