Help and advice on updating firmware.

Hello to all.
On my N900 the firmware is showing as 2.2009.51-1.205.1
I'm based in the UK and I'm on the Vodafone network, the phone was supplied by Vodafone.
I have been trying to update but every time I check for software updates it shows none are available, when I connect via NSU it says that I have the latest version. 
It show on here that the Latest software release for Nokia N900 is 10.2010.19-1 *.
I can't access OVI store as it keeps telling me to update my firmware but then my N900 says its up to date.  I'm going round in circles! 
What's the best action to take please?

you need to flash your device to update but it will void your warrenty with vodafone and you need to back everything up as you will lose everything

Similar Messages

  • Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split i have a new laptop and now it keeps asking for the old ID or it'll erase my apps bought on theold account.

    Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split up and now im trying to get all my apps and info onto my new laptop with a new account but it keeps asking me for the old apple ID which she is still using and she changed the password. i tried backing it up but still nohing. When i try to back up purchased items being apps etc its keeps asking for the old one. help

    See Recover your iTunes library from your iPod or iOS device. But you'll still need the password.
    Once you have the computer authorized to use the account she could change the password again to stop you buying apps on her card (assuming it's not on yours!). It would lock you out of upgrading them too but they should work unless she uses the deathorize all feature.
    It depends on how amicable the split is...
    tt2

  • I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

    I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

    I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

    Hi
    That screen grab helps a lot. There’s a much easier way of doing what you’re doing.
    Remove all your tabs and set the text in justified paragraphs.
    I’ve typed in dummy text in the example I made below, but after “19.1” put in a space and put your blinking cursor after the space and before the ’N’ of ‘Notices'.
    Then hold down the Command key and hit Backspace (on Mac at least - it’s the key between the Inverted commas/ apostrophe key and the return key).
    The text will jump into place the way you want it to.
    Hope that helps
    Paul
    PS You can set a tab, instead of using a space, in the description I gave above. So, after 19.1 or 19.2 or 19.185 etc etc insert a tab, then hit the Command Backspace after every paragraph number and they'll all line up exactly together. You'll find that editing text within the paragraphs
    after you've set it will be LOADS easier this way.
    You can put the tab anywhere you want it to be using 'Command-ShiftT' and putting a 'left align' tab just after the number. Just type the Command Backspace after the paragraph number and it'll work

  • A very new user needs some help and advice....

    Hi,
    I have just taken the bold leap into Indesign and this is the first day of my 30 day trial.
    I need help and advice from you good poeple...please.
    I have been successfully creating A5 booklets (folded A4) using MS Word and printing to a desktop printer. MS Word sorted out my page order for me at printing time so the correct pages were put together.
    I have been reading as much information as I could find but I am still unable to do the same in Indesign.
    I'm looking forward to using the advanced layout features and having control over what I do but, I need to work out this basic step before I go any further.
    I hope what I have explained makes sense.
    Regards
    John

    So presumably you create a new document, A5 portrait, facing pages. Make sure your ducument page count is a multiple of 4.
    Create, type, tweak, ponder, edit, smile, save.
    To create you booklet using InDesign, from the file menu select Print Booklet.
    You will probably need to jump back and forth from the Print Settings button adjusting Paper Size, Orientation, Color, and from the Print Booklet tab set for 2-up Saddle Stitch.
    Much has been posted on this topic, these are the basics, Print Booklet is not the best module Adobe ever wrote, IMO

  • HT5654 Im clicking help and checking for updates, the updates come up so I click to download it and nothing happens, help me?

    Ive clicked on help to check for updates, the update I needed came up so I clicked update and nothing happened, what do I do?

    Going by your profile your Mac has v10.5.8 installed. That is the most recent version available for Leopard.
    You may be able to upgrade to v10.6 Snow Leopard >  Mac OS X v10.6 Snow Leopard - Technical Specifications
    Snow Leopard is available for purchase from the Apple online store > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
    With Snow Leopard installed, iTunes would be updated for you.

  • Help and advice, hint Needed on data Extraction from RSS....

    Hello Everyone,
    Thanks a lot for all your help on all my posts.
    I am posting this question here as I do not really know which forum my question really belongs to.. please bear with my silliness.
    I am wondering if there is a way to extract data from a RSS/ATOM directly into a database ? to explain it further..
    say there is a site called www.dummy.com and it provides RSS, now I want to extract all data from that RSS automatically into a database on a local site.
    I do not know if it is really possible... If yes .... describe it a bit in detail Please.
    Or please give me some information on where to look for more on this topic please.
    I can handle the programming part but I do not know how to do it.. I will really appreciate your input please.
    If I am in the wrong forum please let me know which forum I should post this question on.
    Million Thanks in advance.

    Really there is not much to it. Get a simple file that lists the URLs off the RSS feeds.
    loop over the list and us Vlad Patryshev URLConnection class to get the XML
    Check the last updated time against your current copy and if new update your database (see table structure given). Save the data as BASE64 to save formatting issues and unicode issues.
    Then using the JDOM jar you can read the XML and produce any output you require.
    Wanting: I would recommend scanning the output for an <script>, and special chars that might try to inject XSS code into your site. It's a little risky putputting RSS data directly to your site without checking it over first.
    Personally I would manually check and approve all new RSS data but I am sad :)

  • A newbie in need of help and advice

    I was wondering if someone could help and advise me...
    I got my macbook at the beginning of the year.. I love it, so far. BUT as its my first mac, I know nothing about them or how to proceed.
    I understand there is a thing called 'bootcamp', where I can install Windows. I have just started college and a lot of the stuff I will be working on in class, I would like to continue at home, so I need windows.
    Obviously after persuading my hubby to buy me a mac, I cant turn around and say its no good for college work. Now this bootcamp and installing windows... would I get virus's like a normal windows computer? This was my big thing about buying a mac, the lack of virus.
    How do i even go about getting windows? etc
    Many thanks in advance
    Nic

    Hi Nic,
    You can buy your own genuine copy of Windows from either Microsoft or a reliable reseller like Amazon. I would recommend Windows 7 Home Premium. On Amazon you can find a reasonable discount at the link below.
    http://amzn.to/qVtBvK
    Once you get your copy of Windows, you can proceed with the Boot Camp installation.
    1. Open Boot Camp Assistant after backing up important files and documents.
    2. You should have a Snow Leopard OS X DVD on hand if you bought the Mac last year. If you don't, click the bullet that says "Downoad the support software for this Mac," and you should save all of that to some external source like a flash drive or external hard drive, CD, DVD, something.
    3. If you do have an OS X DVD, click that bullet instead.
    4. Partition your hard drive. It may sound intimidating but all it means is divide the space according to how much you want to give Windows and how much you want to leave for Mac OS X. Dividing in half is usually the easiest way so click "Divide Equally."
    5. Click Continue and when you are prompted, insert the Windows DVD and click Start Installation.
    6. When the Windows Installer prompts you to select a place to install, click on the partition of the hard drive that says "BOOTCAMP" and click Drive Options > Format so Windows can install correctly. It will tell you it won't be able to install at first, but when you click Format under Drive Options, it will be able to.
    7. Proceed with the Windows installation. When it has to restart, hold down the Option key as your computer turns on and select the hard drive that says "Windows," NOT the CD/DVD icon that says "Windows".
    8. Continue with the installation. When it is done, you can insert your Mac OS X DVD (on Windows) and install the Boot Camp drivers, or if you saved it to an external source, connect it that way and install.
    9. To change between operating systems, just restart the computer while holding down the Option key and when the menu appears, double click on the OS you'd like to start up with.
    Feel free to ask if this seems confusing at all.

  • Updating to WM 6 Pro but which one??? Need your help and advice

    Good Day!
    I just recently bought a Treo 750 here in Taiwan and I want to update my device from WMPro 5 to WMPro 6.. I saw 2 different updates both from palm support
    This link i got from a chinese online palm community. This update is for the 2.23 version and labeled as generic English.
    https://ws.palm.com/SupportDownload/app?service=external/Home&sp=20
    This link i got from palm philippines and this update is for the 2.27 version labeled as generic English for APAC Region http://www.palm.com/ph/support/treo750/downloads/wm6update.html
    Device String Download file Treo 750 Treo 750-1.16-RWE Download
    Which file do I download?? I'm thinking of downloading the latter since it is a much higher version compared to the previous one.. Hope to hear from you guys soon thanks a lot!!!!
    hyuuga_patik
    Post relates to: Treo 750
    Message Edited by hyuuga_patik on 10-18-2008 02:15 PM
    This question was solved.
    View Solution.

    Hi HardBeatZ thanks for the reply.. my version is Treo750 - 1.16-RWE. So do I download the 2nd one the one from the palm philippines website? I am a bit confused by your suggestion...
    here is the link http://forum.palmislife.com/thread-81973-1-1.html for the chinese forum where I got the first download link..you can maybe scroll down a little bit then you can see this part.. 
    -- 2.23 --
    Palm 750  / 零售 unlock  / 官方下载
    Treo 750-1.16-RWE
    升級後版本 Treo 750-2.23-RWE
    which is also matches the same string version from the palm philippines website and my current device.. Hope to hear from you soon thanks a lot and take care!
    ****the chinese word on the right side of unlock / is the link to the updater..
    ****from the palm phil website the link to the updater is Download next to this: Device String Download file Treo 750 Treo 750-1.16-RWE (see first post)
    hyuuga_patik
    Post relates to: Tungsten E2
    Message Edited by hyuuga_patik on 10-19-2008 01:42 AM

  • Help and advice needed for Backberry Pearl 3G 9105

    I am trying to access sms messages that i have received but did not reply to, i know the folder but there are other sms messages missing that i have saved?
    Also how can i copy the sms saved messages folder to some where else like faourites?
    Any advice would be appreciated.

    You can't move "that" folder.
    But do you currently have your SMS messages as a part of the overall main Messages folder?
    If you want to move THOSE to a separate SMS folder... Go to your main Messages folder and select Options > Inbox Management > and UNcheck the "Text Messages" options to create a disinct folder for SMS.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HP Warranty Repair Help and Advice

    I need help to resolve an issue that I'm having.
    I sent two of our desktop computers to HP for a warranty repair.
    I shipped them in the HP provided boxes with the HP provided shipping labels.
    They were both delivered to the HP repair center in Jeffersonville, IN. One of them on 3/25 and the other on 3/26.
    We received one of them back very quickly (Order Number BDRJ727001).
    We still have not recieved the other one (Order Number BDRH838402)
    I have now called 4 times to get a repair status from the toll free number support line.
    I have been promised updates to my order each time I have called within 48 hours. I still do not have any updates to my order. The first 3 reps told me that the repair center has my computer and is working on it. 
    The last rep I spoke to told me that the repair center received an empty box and she would escalate the repair. This is the first time that I have been told this. The first 3 reps said nothing about this.
    I don't believe that anyone will be calling me back or giving me an update since nothing has happened as promised yet.
    We have 18 HP computers and all are used daily. We really need this computer back so we are not short a workstation. We have been without it for almost 2 months now.
    Is there someone else we can call or speak to regarding this issue? 
    Thank you for your help.
    Richard

    Hi @rich251 ,
    I have sent your issue to be reviewed and do check your private message for a HP employee to reach out to you. I hope this will help out with you problem.
    Best,
    Russ
    I worked for HP.

  • 80gb Classic - registration loop and can't update firmware to 1.0.2

    I finally talked my dad into getting an iPod and now he regrets the decision.
    We downloaded the latest version of iTunes, set up his library on an external hard drive, and spent several days ripping his extensive CD collection to the hard drive. When the time came to finally sync the iPod, everything went well until I clicked "update" to update the firmware to 1.0.2. It downloaded OK, but when it tried to install the update, we got the following error message: "The iPod Could not be updated. You do not have enough access priviledge for this operation." When we disconnected and reconnected the iPod to try it again, we had to go through the registration process again. This has happened each time we try to sync the iPod. This is on a Vista machine, and my dad was logged in with administrator access, so we're kind stumped as to what the problem may be. We've tried uninstalling and reinstalling iTunes, and resetting the iPod, to no avail. Any suggestions?

    We have uninstalled and reinstalled itunes again, and this time it seems to have solved the problem. Now we're having another one which I'm currently scanning the forum for solutions. Now he's getting repeated albums in the album list view. The same two albums are repeated on the iPod 13 times, where they are only in iTunes once. We tried using iTunes to restore the iPod, and we got the same "insufficient access priviledge" error message. AAAAARGH!!!
    But in answer to your question, Mobbie, I believe we have another computer we can use. Since the music is on an external hard drive, it shouldn't be too hard to try that to fix this new problem.
    Message was edited by: sdimartino

  • Job Interview - Help and Advice Needed

    Hi all,
    This may seem like a strange request for help but I'm completely stuck. I've just completed a Computer Science degree and have applied for a Junior Developer role at an Insurance company. I was lucky enough to get an interview which is this Thursday. Which is great, but not so great!
    The interview is a 45 minute programming exam and the only instructions I get up until the exam are;
    As an overview - it will require you to write some software using a language of your choice to interrogate a database and manipulate the data.
    Now I'm not the greatest programmer (strange considering I'm applying for a Junior Developer role, but a jobs a job right?!) and during my degree I never used any language other than SQL/Oracle to interrogate databases. I've said that I'll be attempting the task with Java (as its the language I know best) However - I'm not sure where to start looking to get myself up to speed.
    Could some of you be so kind as to point me in the right direction of where to start looking? What classes should I focus on? Am I right in thinking I would need to use DTOs? Am I asking the right questions?!
    I don't hold out much hope for the interview but I'll be going for the experience at least - but if any of you could offer any advice on what I should revise before hand I would be forever greatful.
    Many thanks =@)

    With only 45 minutes, I assume the task will be pretty narrowly defined. My experience is that new developers out of CS majors (myself included) tend to over-design things. Given the short amount of time, I would suggest not trying to impress them with your knowledge of patterns unless they make the task easier to finish in the allotted amount of time. Focus on completely the task(s) successfully. That's going to be a lot more impressive unfinised work. 45 minutes is going to blow by, so don't get too fancy. In addition, if you over do the design, a lot of experienced developers will not look upon it kindly. Keep it simple and correct.

  • Thanks for all Your Help and Advice

    I just wanted to say a big thanks to the forum for advice and help on
    technical problems with After Effects.... and a special BIG thanks to
    Mylenium and Jonas Hummelstrand.
    If you want to see the results The Story of India starts on PBS Monday Jan
    5th 9/8c or there are clips on the website: www.pbs.org/thestoryofindia
    Cheers!
    John Cranmer (aka Jack_Daubs)

    Hi Murray
    You are not being harsh
    I don't mind coding as in the past I have done that with Toolbook, to the level of cinema booking
    systems, Director, Flash,  and courses in html and C++ and some CSS for Wordpress
    However.............
    I occasionally crack at Dreamwever and can get most of it but I keep having a problem
    with positioning.  I have had another crack and still not solving it.  It seems I follow the
    instructions and unexpected results follow.  It seems that not all conditions are
    explained in the various instructions but I will keep an open mind that there is something
    idisosyncratic to do with myself, or, I am missing something but what.  I have not had
    any similar problem with other stuff.  Admittedly  I have been used to a very object
    oriented way of doing things whereas DW works in and out of the document flow
    but I am not sure that is the problem.  I thought I would try a different angle and
    put a sequence of baby steps on a forum and see if see what happens when
    things went wrong and someone could point it out to me at the stage it happened
    so to speak.
    In the manual I have it says that DW creates the code for you. As such I thought
    well this will save a lot of time.  I thought therefore code only needed to be used
    incidently or later on.  Does it mean then that code is best done by default.
    Does this render most of the interface useless.
    I admit I don't understand and I don't understand why I don't understand.
    incidently I have been advised that it is best to use floats for main layout
    Is this right, I have tried them with again strange results.
    Regards
    fishinabox

  • Pros and cons of updating firmware 1.01.03 to 1.11.01 on Zen Micro

    I have a Zen Micro 5.0 gb unit with original firmware of .0.03. It works fine with no problems except for the 24 hour standby time. I use Red Chair Notmad software to add or delete mp3's and drag and drop worksreally well for me. If I update the firmware to ..0 I can eliminate the24 hour standby time and cut it down to the 4 hour time. If I do this will I run into any of the problems that I read about in this forum when people update to the latest firmware of 2.2.02, or will I stillhave a steady, reliable firmware with the .0.0 with the addition of the 4 hour standby? Also can I still use the red Chair Notmad software(the latest version) and it still work like my current firmware?Please give me your pros and cons about this. Thanks a lot,?Jim

    There are no real cons. ..0 is very stable.
    I use Notmad with it and it works great. However, now that Creative has made an MTP driver for pre-Windows XP machines, the 2.x series firmware looks like a decent alternati've, though I haven't tried it.Message Edited by Lyle_JP on 03-23-2006:56 AM

Maybe you are looking for