Help! Another "Entry Point Not Found" Error

Hello,
I purchased iPhone 4 earlier this week and went to synch it last night. Apple Updates updated and crashed several times, now iTunes won't even start. I already had it set up for my iPod, my iPad, and a prior iPhone, so just plugged my new iPhone in and went to town. iTunes did update all my apps before I used Apple Update. I was trying to get the OS updates for both my iPhone and iPad, but now it doesn't work. I tried downloading iTunes again and running the fix and it didn't work. I am runing Windows 7 64-bit.
Here is my error message:
iTunes.exe - Entry Point Not Found
The procedure entry point
kCMByteStreamNotification_AvailableLengthChanged could not be
located in the dynamic link library CoreMedia.dll
Then a second dialog box pops up that says:
iTunes
Itunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)
Please help!
Thanks, Sean

Hi vladdy007,
Please upgrade your OS to Win XP SP3. This would fix the problem. The minimum spec for running AI CS6 is Win XP SP3.
Thanks and Regards,
Nishant Kumar Thakur

Similar Messages

  • ITunes Helper.exe - Entry point not found error after upgrade

    I just tried to install the latest iTunes software for Windows on two separate PCs running XP Pro SP3 and get the same error on both PCs at every windows startup: iTunes Helper.exe - Entry point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll. Is this a known issue with a fix?

    Hmmm. Roy B has some advice on that one in the following post:
    http://discussions.apple.com/thread.jspa?messageID=10208523&#10208523

  • "Entry Point not found" error message and sqlite3.dll

    Hello!
    I hope someone can help me. when I try to burn a playlist or CD from iTunes (using windows vista) i receive this error message about half way through the disc burn "The attempt to burn a disc failed. An unknown error occurred (4450)" and burn cancels. On start up I receive this error message: " Itunes helper.exe - Entry Point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll"
    How do I fix this? and is the reason why I cannot burn CDs?
    Thanks!

    HI!
    I TOO AM HAVING THIS PROBLEM... I WOULD LOVE FOR SOMEONE TO SEND ME A SOLUTION TO IT. I GET THE NOTICE WHEN MY CONPUTER BOOTS UP! [email protected]
    Hello!
    I hope someone can help me. when I try to burn a playlist or CD from iTunes (using windows vista) i receive this error message about half way through the disc burn "The attempt to burn a disc failed. An unknown error occurred (4450)" and burn cancels. On start up I receive this error message: " Itunes helper.exe - Entry Point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll"
    How do I fix this? and is the reason why I cannot burn CDs?
    Thanks!
    Message was edited by: CEDARMOM52

  • HT1923 entry point not found error message

    Just download new itunes  and keep getting entry point not found error  message

    HI!
    I TOO AM HAVING THIS PROBLEM... I WOULD LOVE FOR SOMEONE TO SEND ME A SOLUTION TO IT. I GET THE NOTICE WHEN MY CONPUTER BOOTS UP! [email protected]
    Hello!
    I hope someone can help me. when I try to burn a playlist or CD from iTunes (using windows vista) i receive this error message about half way through the disc burn "The attempt to burn a disc failed. An unknown error occurred (4450)" and burn cancels. On start up I receive this error message: " Itunes helper.exe - Entry Point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll"
    How do I fix this? and is the reason why I cannot burn CDs?
    Thanks!
    Message was edited by: CEDARMOM52

  • After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

    After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.

    Hi, I get the same error EVERY time iTunes updates.
    I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
    My Question:
    Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
    It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
    Thank You,
    Steve

  • I was stupid enough to try to update my iTunes, now I'm getting Entry Point not found error:

    I was stupid enough to try to update my iTunes, I have troubles every single time i've tried to do this.  In the past I've been able to fix it using the support forum, not this time.  So now I'm getting Entry Point not found error:
    The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll
    I've uninstalled, and reinstalled MULTIPLE times. Removed all apple related components,  ran as administrator, repaier .net frame etc etc etc....
    Still get this error when opening itunes. And after I close that error, I receive Error 7 - itunes was not installed correctly....please reinstall.
    WHY is this ALWAYS such a pain?  Andriod phone here I come...

    See Troubleshooting issues with iTunes for Windows updates.
    Try the repair tip in the third box first.
    tt2

  • I'm trying to download the latest version of iTunes.  I get an "SoftwareUpdate.exe - Entry Point Not Found error".  Any idea what might cause this?

    THe error box says procedure entry point not found....then a string of code that "could not be located in the SoftwareUpdateFiles.dll".
    I'm try to update my software so I can sync my iPhone with my current iTunes library.
    any help greatly appreciated.

    Let's first try a repair install of your Apple Software Update.
    In your Add or Remove Programs control panel, select Apple Software Update, click "Change" and then click "Repair".
    Does the repair go through okay? If so, try another iTunes update. Does it install properly this time?

  • Fireworks.exe - Entry Point Not Found Error

    Hi. I'm new to this forum.
    To be brief, I get the following error message when I start
    Fireworks on Windows XP
    (%programfiles%/Adobe/Fireworks/fireworks.exe):
    Fireworks.exe - Entry Point Not Found
    The Procedure entry point
    ?doReplace@AGL_UnicodeString@agl_2_8@@AAEAAV12@JJPBGJJ@Z could not
    be located in the dynamic link library libagluc28.dll.
    I've tried copying this DLL from various other locations
    (Adobe Bridge, Flash, etc), but to no avail. Where can I get the
    correct DLL from, if at all?
    All Help appreciated. Thankyou in advance.

    A quick search on Google suggests this problem is associated with FlyakiteMacosX plug in.
    Do you have that installed on your computer?
    If so, have a look at this web page .

  • I see a AppleSyncNotifier.exe - Entry Point Not Found error when my PC starts.

    when booting up my computer, even before I try to bring up itunes, I get the following error message:
    AppleSyncNotifier.exe - Entry Point Not Found
    the procedure entry point ___cfconstantstringclassreference could not be located in the dynamic link library core foundation.dll
    But once I click off the message, everything seems to work fine.
    how can I correct this problem?
    2 IPod 5.1.1
    1 IPad 2 wifi
    Windows Vista 32

    Try here >  http://www.pchelpforum.com/xf/threads/applesyncnotifier-exe-entry-point-not-foun d.124298/

  • My iTunes won't open on Windows XP. iTunes.exe - Entry point not found, Error 7 (Windows Error 127)

    When I open iTunes, I get a message saying under iTunes.exe - Entry Point Not Found, it says, The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. And I'm not talking about the AppleSyncNotifier.exe. Along with that, I get the message saying, "iTunes was not installed correctly. Please reinstall i Tunes." Error 7 (Windows Error 127). That's why I'm unable to open iTunes. I sure hope to see a solution to those problems soon.
    I know I've mentioned this before, but I've now given a little more info to make my explanation more clear.

    Try this one from Article TS3074
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074

  • Applephotostreams.exe entry point not found error

    In the last several weeks I've been receiving the following error message upon startup of my Windows 7 PC:
    applephotostreams.exe entry point not found
    I've tried searching for similar error messages on the web and in this forum without finding a solution.  I'm also receiving a similar error message for ubd.exe on startup as well.  Any suggestions for repairing this problem would be appreciated.

    A quick search on Google suggests this problem is associated with FlyakiteMacosX plug in.
    Do you have that installed on your computer?
    If so, have a look at this web page .

  • Gwdca.exe - Entry Point Not Found Error With Hot Patch 4

    We've upgraded a few of our GroupWise 8 clients from 8.0.3 Hot Patch 3 to 8.0.3 Hot Patch 4 to address the critical security vulnerability in HP3. We receive the following error message (attached) every few minutes which seems to be related to the archving process.
    Receiving gwdca.exe - entry point not found
    The procedure entry point DAGetLinkedObjectParent could not be located in the dnyamic link library sccda.dll
    When the error appears, it seems to correlate to the "Updating Archive Quickfinder Indexes" appearing in the bottom left corner of the GW client. Backreving the client to 8.0.3 HP 3 resolves the problem. We have tried running GW Check on the mailbox as well as forcing a reindex of the archive without any success. Any insight would be appreciated.
    Thanks
    Josh

    Originally Posted by joshbilsky
    We've upgraded a few of our GroupWise 8 clients from 8.0.3 Hot Patch 3 to 8.0.3 Hot Patch 4 to address the critical security vulnerability in HP3. We receive the following error message (attached) every few minutes which seems to be related to the archving process.
    Receiving gwdca.exe - entry point not found
    The procedure entry point DAGetLinkedObjectParent could not be located in the dnyamic link library sccda.dll
    When the error appears, it seems to correlate to the "Updating Archive Quickfinder Indexes" appearing in the bottom left corner of the GW client. Backreving the client to 8.0.3 HP 3 resolves the problem. We have tried running GW Check on the mailbox as well as forcing a reindex of the archive without any success. Any insight would be appreciated.
    Thanks
    Josh
    Duplicated and reported as defect #902940.

  • ITunes.exe - Entry point not found error after reinstalling

    I'm not sure on when this started to happen
    iTunes gives me this error even after i reinstalled iTunes several times.
    iTunes.exe - Entry Point not found
    The procedure entry point
    AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library G:\iTunes.dll
    After pressing OK, it gives me this
    iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 127)
    Thank you in advance.

    Hello crystal_qing
    Check out the article below for general troubleshooting when you are having issues installing iTunes on your PC. You may need to  remove content from the Temp folder and even remove iTunes and its related software and then reinstall iTunes.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    -Norm G.

  • Safari.exe  Entry point not found - error message.

    The procedure entry point... could not be found... When I try to start up Safari on my wife's pc. I deleted and reinstalled...same response...what gives. What else to do?

    b noir wrote:
    The procedure entry point... could not be found...
    What's the precise text of the message please, Roger?
    (I suspect you're having an issue with an Apple Application Support dll, but don't know for sure unless I know the details of the error message in this case.)
    "Safari.exe - Entry Point Not Found
    The procedure entry point
    ? prototype @ JSImmediate@JSC@@CAPAVJSObject@2@VJSValue@PAVExecState@2@@Z could not be located in the dynamic link library JavaScriptCore.dll."
    *I believe I have copied all the text that shows up.*
    Robert

  • Entry point not found error

    Hello,
    I just tried opening Itunes for the first time in a month or so and it said I needed to download an update with 11.5 (it seems) and quicktime.  After running the update I get the following error message.
    iTunes.exe - Entry Point Not Found
    The procedure entry point
    ?videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@2@@***@@XZ could not be located in the dynamic link library C:\Program Files (x86)\Common Files\Apple\Apple Application Support\WebKit.dll.
    Then the next pop up is
    iTunes
    iTunes was not installed correctly.  Please reinstall iTunes. 
    Error 7 (Windows error 127)
    I have tried to remove itunes and followed a couple other things I have found on these boards with no different outcomes.

    I'm having the same problem. I've uninstalled and re-installed multiple times now and still have the same issue. Were you able to figure it out?

Maybe you are looking for

  • How to transfer photos from Zen Vision M 60GB to

    I was recently on a long trip and ran out of storage on my camera's memory in a location where I was not able to buy more memory or to transfer to a PC, so I transferred directly from my camera to the Zen using the USB function. The photos transferre

  • How to handle a big number of users on our website

    Hello, We are working on UCM 10gR3. We made a web site with Site Studio and now we are testing the web site with a big number of users : the number of users increase one by one each interval of time until 500 users. For this test, we first set : - Nu

  • Difference Between ..

    Hi,    kindly tell me the <b>Difference Between Business System and Business Service?</b>. when we go for Business System  and Business Service? . thanks, Cheers, Kannan.

  • Constructors in Inheritance.

    Hi, REPORT  Z_INHERITANCE_CONSTRUCTOR. CLASS demo DEFINITION.   PUBLIC SECTION.   CLASS-METHODS main.   ENDCLASS. CLASS vessel DEFINITION.   PUBLIC SECTION.   METHODS : constructor IMPORTING i1 TYPE string                                             

  • Brand new HP Deskjet 2540 keeps jamming when trying to print

    I've just bought a new HP Deskjet 2540 and have finally managed to get it set up, but when I try to print something from my laptop (or print a test page from the printer), the paper jams.  A page gets taken down by a third or so, but it goes down twi