Help anyone ? 3502 AP Recovery Problem
I have had one 3502 access points die in the last few days. I suspect it was broken flash systems and are due for the bin. If anyone can offer any confirmation or a way to fix it, I would be grateful.
On booting, it gives the following error:
Xmodem file system is available.
flashfs[0]: unable to allocate available block.
The system has been interrupted, or encountered an error
during initializion of the flash filesystem. The following
commands will initialize the flash filesystem, and finish
loading the operating system software:
flash_init
ether_init
tftp_init
boot
ap:
Trying to wake up the flash:
ap: flash_init
Initializing Flash...
flashfs[0]: unable to allocate available block.
...done Initializing Flash.
ap: dir flash
unable to stat flash/: permission denied
I have tried the standard recovery mode of uploading a new firmware via TFTP, but I can't even set variables:
ap: set IP_ADDR 10.0.0.1
flash:/env_vars.tmp: invalid argument
The filesystem containing the variables may not be initialized yet.
It's like my flash: it's all CLEAN not even system file is left.
I wonder if my access point is broken ?
It does seem like your flash went bad. Usually I can initialize the flash but again, I haven't had a bad ap. If you followed the process in this link and it does still fail, then yes, your ap is bad.
https://supportforums.cisco.com/docs/DOC-14636
Sent from Cisco Technical Support iPhone App
Similar Messages
-
Please could someone help me about my recovery problem?
Hello, I bought iphone 4s 6 months ago from Canada.Last week when ı was using my phone and tried to open an application, phone has suddeny frozen restarted itself and went into recovery mode.I restored from itunes.But same problem happened many times.I bought it from apple store canada and didn't jailbreak it. Does anyone help me?
No. You can only have it serviced in the country where it originated. The EU is considered one country for warranty and service purposes, but Canada is not a member of the EU. You will have to take the phone to Canada or send it to somone you trust there to take it in for service.
-
Hi,
my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?Hi there hstear93,
You may find the information in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W. -
When I try to enter codes for digital movie downloads it tells me "code redemption is temporarily unavailable. Try again later." Customer support has been no help. Anyone else have this problem?
Am sick of going back and forth with what has turned out to be worthless customer support. Have sent them so much info and pictures, no help. All they do is send me links for instructions on how to redeem the codes. I know how to redeem, I have redeemed at least 50 codes. To them I am obviously an idiot though. To me it seems to be a problem on their end, but can't get an answer from them on why it is telling me code redemption is unavailable. Please help! Anybody!Confirming my suspicions with every passing hour. Support on this forum is non-existent like the support from Apple support. But, you got my money now... why would you care?
-
Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out
I'm assuming you have Photo Stream set up of both devices. However, it seems many users are experiencing the same as you - my take is that streaming photos is not foolproof yet.
-
the devices is not popping up in our itunes. is anyone else having this problem. can you help me if you have the same problem
Try rebooting the computer and restarting the device.
Try a different cable.
In rare cases fluff in the connector port can prevent proper contact with the connectors used to transfer data. An air duster or thin piece of card or plastic can be used to tease out debris if that is the problem.
tt2 -
After updating to iOS 8.0.2 the App Store and iTunes have disappeared, is anyone else having this problem? Help please!
Well, if they have truly disappeared then something is really messed up. For really messed up stuff, you need to set it to factory default condition, and then afterwards, restore it from your backup.
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414 -
HELP!! Mac OS X 10.7 Lion Recovery problem
Please help me to solve the problem.....
I recent encountered several problems with my MBP (Early 2011) so I decided to have a go into reinstalling OS X Lion. My computer had been formatted into 2 partitions inside the internal SSD. I boot into the Recovery HD, then erased both my Lion partition and the other volume. When I tried to restore the 2 volumes into 1 single volume using the disk utility, it encountered the "Disk cannot be unmounted (-69888)" error. I gave a go to install Lion in my larger volume, but the installer didn't detect the partition.
I'm now stuck in the Recovery HD, and my computer does not have an operating system at all.....
Can someone plzzzz solve my problem. A MILLION Thanks!!Yeah, submitted last night.
I have a funny feeling they'll reply stating it's a Adobe problem :\ -
Hello.can anyone help me plz i have problem with my macbook air i can't find image capture.
hello.can anyone help me plz i have problem with my macbook air i can't find image capture. there is nothing in progrem can i reinstall that progrem and how?thanks
If you can't find it in your applications folder you will need to reinstall your Mac OS X. Take a look at this link, https://discussions.apple.com/message/16478873#16478873
-
Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)
Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)
-
Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"
You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
If you can find the problem page you would only have to rebuild it rather than the whole site.
The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time. -
Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?
First, go install the MacOS 10.10 updates - you should be on 10.10.2.
I haven't heard of Photoshop not responding during opens and saves. Does it stop responding while the open/save dialogs are visible, or while Photoshop is actually reading or writing files?
10.10.1 did fix a crash in the open/save dialogs, but 10.10.2 still has some odd issues (mostly program errors coming from the OS code) in the open/save dialogs. -
Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer
There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/
-
I have downloaded Roberts Book of Birds several times at great cost and it never opens. I just get a cover page and nothing else. Anyone have any ideas for me?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
You can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue you can open Firefox in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you. -
Hi,
I have recently updated my iMac from OS x mountain lion to OS X Mavericks.
After that I can't upload any video and some files to my personal email account.
I have tried to send a small video clip to the sender as attachment. i have done this before
with the same video same and same email account. This problem found just after installed the
OS X Movericks. Can anyone please help me to sort this problem.
Thanks.
RomanPlease follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in earlier versions there is only one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Maybe you are looking for
-
Windows error when starting iTunes 5.
Hey. My iTunes suddenly started giving me a Windows error when starting it. I installed iTunes 5 instead of iTunes 4 recently, and it has been running. But today when I wanted to transfer some more music to my iPod iTunes wouldn't start. I just get t
-
PR00 is missing in the table PRCC_COND_CT
Hi Experts I have successful replicated all conditional Objects like DNL_CUST_CNDALL,DNL_CUST_CND,DNL_CUST_PRC from ECC to CRM2007, when i try to create a Sales Order in crm Condition types are missing ,i can able to see only values with Zero in the
-
Latest version install won't launch
I've uninstalled and installed the lastest version of player. Yet when I try to launch a utube video it pops up and tells me I need to download the latest flash player. Not sure what to do next.
-
Server0 is not getting started some timeout out services: issue with thread
in SAP MMC server0 is in yellow colour!!!!!!!! and dev_server0.out file is below explaing the exect error in log file...................... stdout/stderr redirect node name : server0 pid : 7832 system name : E12 system nr. : 03 started at
-
Reset carrier settings after changing the carrier
Hi, I want to reset the old carrier settings under "settings -> general -> about" and remove a carrier button which was added by my old carrier under "settings -> phone". Is this possible? Thank you very much in advance! Kind regards Sebastian