Help, Apply a Zoom in effect to a page?

I was wondering how you would do a zoom in effect as a page turns and it would stop and a menu would come up to click to which part of the story you want to go to.

With your image in the timeline to have the display length of time set, double click on it to put it in the Viewer.
In Viewer
• Set the play head at the beginning of the clip.
On the Viewer>Motion tab
• Click to set a Scale Keyframe
• Set the scale.
• Move the playhead to the end of the clip
• Click to set a scale keyframe
• Set the zoomed in scale
Play it.
x

Similar Messages

Zooming in effect?

Hi, I was making a video and I can't seem to find a way to add a zoom in effect to a particular portion of the video. I know on windows movie maker they have what I am talking about but I cant find it on Adobe Premiere Elements 7.0. Is there a way to do what I want and if so how? Thank you.

I think I understand the concept of Keyframing. At first I just didn't
even know what a keyframe was. And I thought that animation effects were
just for people who made cartoons. But I'm starting to get it.
In some roundabout way, I've already combined identical frames in the Movie
Maker 2.5 (XP Media Center)and applied effects and manipulated timing to
get effects they didn't have. (In the Vista version, some of that doesn't
work.) So in Premiere Elements it's going to be much more precise and
flexible. I think you're right in that once I know how to work it, I will much
prefer it.
It's actually knowing which little items to click on and which values to
enter (I'm so off-base with my numbers!), and then remembering where on
earth I found those sometimes hidden items, that's the challenge.
I'm going to try it, and I'm glad there's the movipix website out there
where I can get some help if I need it.
Thanks again,
Elisabeth.
In a message dated 6/23/2009 11:42:48 A.M. Eastern Daylight Time,
[email protected] writes:
No eye-rolling from me! Keyframing is not that easy a concept to grasp,
but when one does, it becomes second nature. It is that initial conceptual
phase that trips up a lot of editors.
Maybe it's because I come from an engineering background, a couple of
lifetimes ago, but I find that the "numbers" are the easiest way to do it.
OTOH, many like to do it in more of a visual sense, with the "bounding box" for
the Video. I won't go into a lot of detail, because I think that PE might
well handle this differently than PrPro does, and I do not want to either
"lie" to you, or confuse you. Steve's articles, and book, go into the proper
detail and FOR PE.
Trust me, when you get Keyframing down, you will wonder how you ever lived
without it. I use some form, or another, in almost everything I do in
Premiere. I can't tell you the last time that I chose any Title animation
Preset. I always Keyframe everything, because I am a "control freak," and would
rather do it all by hand, than rely on some pre-packaged Preset.
Good luck and do read over Steve's articles. He breaks it down into
easy-to-understand terms. Once one "gets it," they'll never look back.
Hunt

Can the Adobe Photoshop Layer Support with Captivate 4 be use to show a Zoom & Pan Effect?

I'm working with a client that is interested in creating the "Zoom & Pan" effect you get with Camtasia using Captivate 4. I'm not finding enough information to support that this is possible with Captivate 4. The Photoshop Layer Support feature with Captivate 4 comes across as something that may work to some degree however, it is again unclear if it would definitely work to give the zoom & pan effect I am looking for. Would anyone mind explaining this feature in greater detail and/or offering any ideas for how I can show the zoom & pan effect in Captivate 4?

Hi there
LOL, good luck with that!
NOTHING in Captivate will achieve what you are seeing in Camtasia. Sorry, there simply is no comparison. Sure, Captivate has panning while recording, but what you end up with are several herky jerky snapshots of suddenly being in a different screen area. Sort of reminds me of walking through a room while slowly closing and opening your eyes. In other words, you are seeing version 1 of the panning feature. We hope it improves, but it's not there yet.
If you have Camtasia, you could combine it with Captivate for some nice and interesting effects and have the best of both worlds! I do that.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Is normal that appear a spot when i use the camera? and when you apply the zoom, the spot increases its size?

Is normal that appear a spot when i use the camera? and when you apply the zoom, the spot increases its size?

Morning alex navarro,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Hope this helps,
Mario

Expand horizontal scroll panel on both sides for a zoom in effect

Hi,
I'm creating an interactive timeline with Flash Catalyst. It is set up as a long horizontal scroll panel which contains buttons that link to states with photos and text about historic events. One feature I would like to include is a zoom feature, like the one found on the bbc British history timeline (http://www.bbc.co.uk/history/interactive/timelines/british/index_embed.shtml ). E.g., when you click on a colored section of the horizontal scroll panel it will zoom in to view that timeframe in more detail.
The problem I'm running into is that I can't expand the scroll panel to the left. So, I can go into edit mode for the scrolling content, create a second state, and enlarge the scrolling content in that second state to create a zoom in effect. However, because the scrolling content will only expand to the right, I can't line up the interaction correctly.
Is there a workaround for this in Flash Catalyst?

have a peek at this:
on the left, the corner radius (the red line) is enough to create a curve on the inside of the stroke. on the right, it isn't large enough.

In Zoom Burst Effect Guided Edit, when i use the Add Focus Area button instead of focusing on what i choose it bring the entire photo into focus.

In Zoom Burst Effect in Guided Edit, when I use the Add Focus Area button instead of focusing on what I chose it brings the entire photo into focus.

I'd try resetting the pse 12 preferences by going to Adobe Photoshop Elements Editor (Edit)>Preferences>General
and click on Reset Preferences on next launch, then restart pse 12.

Photoshop Elements 12 Zoom Burst effect stopped working

the zoom burst effect has stopped working in PSE 12! when I click the zoom burst function the photo distorts as designed but when i click the "add focus area"
button on the photo it returns the whole photo to normal without focusing the part selected. can anyone advise how to overcome this,
I have uninstalled and reinstalled PSE 12 already with no effect.

I'd try resetting the pse 12 preferences by going to Adobe Photoshop Elements Editor (Edit)>Preferences>General
and click on Reset Preferences on next launch, then restart pse 12.

Can I crop an image then apply the Ken Burns effect?

I shot a panoramic still with the iOS6 on my iPhone 4S. I guess because I didn't hold it steady there are white boundries on the top and bottom. I would like to crop these pieces out and then apply the Ken Burns effect.

Crop the image in Preview or iPhoto.

I have Elements 12. I can not use the "zoom burst effect". I the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part og´f the picture the whole picture imidiatly gets sharp. What is wrong?

I have Elements 12. I can not use the "zoom burst effect". In the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part of the picture the whole picture imidiatly gets sharp. What is wrong?

I have Elements 12. I can not use the "zoom burst effect". In the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part of the picture the whole picture imidiatly gets sharp. What is wrong?

New shape layer auto applies the same layer effects as previous ones

Everytime I draw a new SHAPE layer it auto applies the same layer effects I applied to the first shape I drew in a document. I can’t find anything online about turning this annoying setting off. So for example, if I draw a circle and apply a gradient overlay and a drop shadow then every circle I draw from here on out adds the same effects automatically.

To draw a new shape layer without the layer style applied to the
previous shape layer:
Click image to enlarge.
MTSTUNER

Can I lock in a zoom level (e.g. Page View) so it won't change?

I'm wondering if there is a way to prevent Adobe Reader from changing my zoom level. I prefer to read with the zoom level set to Fit Page. Every time I click on a bookmark to jump to another page in the document, the zoom level changes to Fit Width (I think). This is extremely annoying because I have to keep changing the view back to Fit Page. In preferences I have put the default zoom to Fit Page, but that only determines how it comes up initially. When I click on a bookmark it changes again.
I don't understand why the zoom changes when you click a bookmark at all. Why would I want the zoom to change on me?
FYI, I'm using Reader XI (11.0.08).
Thanks for any help/suggestions.

Thanks CtDave. I don't have anything besides the free reader, so I did some further research on the web and found a solution that is pretty "brute force", but is an option for others that only have the free reader. Here is a link to the full description:
http://superuser.com/questions/306803/zooming-size-of-pdf-files-and-bookmarks
Here is the basics: You can use a text editor and edit the PDF file. Once in the text editor you can search for /FitH or /Fit (there surely are other codes, but those are the only ones I know of). These are codes that tell Acrobat what kind of zoom level to apply to the destination of a jump. So the bookmarks should all have these. Simply do a search and replace with /XYZ. The /XYZ code tells Acrobat to leave the zoom level as it already is.
It might sound a bit weird, but I tried it on multiple files I was having trouble with and it worked great. Of course, my suggestion would be to make backup copy of the file before doing this in case something goes wrong.
Thanks.

Zoom settings change when adding pages

Hi
When adding a page to a document with this code:
app.activeDocument.pages.add(LocationOptions.AT_END);
InDesign automatically reverts the zoom setting to FIT_TO_PAGE
Is there a way to prevent this from happening?
I would like that it should stay at whatever it was.
Help will be much appreciated!
Thanks,
Davey

Davey_Doo wrote:
1) is there a difference between what I wrote "layoutWindows[0]" and what you wrote "windows[0]"?
Yup, "layoutWindows" refer to just the layout windows -- the ones one is normally working in. The other kind is "storyWindows", which is what you get when you open a text in the "Story Editor". There are vast differences between the two, such as "zoom" (you cannot zoom in on the story editor window).
Using "windows", without specifying the kind, you get a list containing both types; and using "windows[0]", you get the very first one, whether it is a story window or a layout window. Then, if it happens to be a story window, csm_phil's script will Crash & Burn because you cannot zoom in on a story window.
Your version will work correctly, and just in case you might have a story editor window open, it's best to stick to "layoutWindows" if you want to change a layout window property.
2) Although this does help, is there a way to prevent it from happening?
The reason I ask is because in a script which adds many pages, (e.g., MultiPageImporter script), the script needs to do this after adding each page.
No, you cannot prevent it in any way. It's just ID's default built-in behavior (although it seems strange that this only happens when using a script!).
But I disagree with your assessment it needs to be done "after adding each page". ID does not store the zoom percentage for each separate page and so it is enough to read the current zoom, add as much pages as you like, then set the zoom.

I zoomed in and out of pages, trying to get the right view to take a screen shot for facebook, and now my email homepage is HUGE when every other screen looks normal.

When I set the view to Zoom Font only, my email page looks normal, but facebook is off. I can't seem to get the settings back to where they were before I tried taking that screen shot. I have tried restarting the computer, but that doesn't help. Am I just screwed?

Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Every time I go to a new site or I refresh a site I'm already on, I have to use the zoom feature. Is there a way to keep it zoomed to a certain size page?

Every time I go to a new site or I refresh a site I'm already on, I have to use the zoom feature. Is there a way to keep it zoomed to a certain size page?

Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Help, Apply a Zoom in effect to a page?

Similar Messages

Maybe you are looking for