Help ASAP, Trouble with Installation

I have tried several times to install Aobe Illustrator CS5 and everytime the installion will get stuck at "JRE" at 5% or 8%. The time remaining starts to slowly count up from 10 minutes to, after trying to leave it on all night, around 3000 minutes. I've ran the Adobe Creative Suite Cleaner, and have made sure I have the latest version of Java. Help would be greatly appreciated, as this is making my project much more stressful than it already is.

Ypu have to tellus what system if a Mac running 10.7 did you install the Java Runtime Extension that is required.
If a PC let us know?

Similar Messages

Troubles with installation of 9ifs

platform Windows NT4
after installation of 9iFS I do not manage any more to use iFS.
indeed I do not manage to launch the Oracle Console Management,
it launch out but disappear at once...
to install 9iFS I have to pass the patchset Oracle 8.1.7.2
(patchset
1882450) to migrate my base Oracle 8.1.7 into 8.1.7.2. this
installation works fine. On the other hand at the time of the
installation of 9iFS, during the checking of the variable of
environment of Oracle iFS, the following error occurred:
oracle.ifs.utils.action.ActionFailedException: the checking of
the
variable of environment CLASSPATH of oracle 9IFS failed, because
the
files or repertories following are not found:
e:/oracle/ora81/jlib/regexp.jar e:/oracle/ora81/jlib/oembase-
9_0_1.jar
e:/oracle/ora81/jlib/oemtools-9_0_1.jar
e:/oracle/ora81/ord/Annotator/lib/Annotator.jar
to be able to continue the installation of 9iFS, I allowed
myself to
put in comment these 4 following lines in the file
ifsclasspath.cl
which is in e:\oracle\ora81\9ifs\admin\cl
so, I could continue the installation of 9iFS, the migration of
the repository (a little long all the same) was carried out
without problem. On the other hand I do not arrive at launching
9iFS by the
Oracle console Management is there an other solution to
manage IFS (files .bat or other...)
I also have troubles with the service NT, Oracle
oracleEoraHome81ManagementServer, it is very long to launch out
and it
stops inopportunely...
I think that all my problems come to the fact that it miss the 4
files (oemtools-9_0_1.jar, oembase-9_0_1.jar, regexp.jar...)
Where I can find these files ? Is there anyone who could give me
these files ?
what do you think about it?
Thanks for helps.

Do you have binutils-2.11.90.0.8-13 patch installed on your system?
See page 2-9, section 2.1.14 Installing on Red Hat Linux in the documentation
"Oracle9i Application Server Release Notes Addendum
Release 2 (9.0.2.0.1) for AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series
HP-UX, and Linux Intel
August 22, 2002
Part No. B10102-01"

Trouble with installation flash player 11.2 on android2.3.5 medion life P4310

hi, i want to install the flash player 11.2 on android version 2.3.5 on mobilphone medion life P4310
i have trouble with it, because the mobilphone not compatible ???
thanks for your help

Flash Player for Android Frequently Asked Questions
Why is Flash Player not working on my Android tablet or phone?

Trouble with installation of BO Edge 3.1

Hi,
Hope this is the right board.
We have some trouble with our Installation of BO Edge 3.1, so at first we will tell you which software we have already installed on our System:
1. Windows Server 2003 x64 Standard Edition on VMWare
2. BO Edge 3.1 with Tomcat
3. CrystalReports 2008
4. Microsoft Office 2003 (Excel only)
5. Xcelsius 2008
6. LiveOffice
7. Java Connector 2.1.8 (We did not find the %/Tomcat55/shared/lib% so we created the shared and lib folders and pasted the dll file)
8. Integration Kit 3.0 with troubles...
...we get the error that the CrystalExtension.dll can't register. To solve the Problem we try to register it manual by regsvr32. But it did not work (Error: LoadLibrary (path...) failed - The specified module could not be found.) In the board we found a notice that we can't use Integration Kit 3.0 with BO Edge 3.1. So we will download Integration Kit 3.1 from sdn but we don't know how we can install a *.war file on our System...
We can't open the CMC Site, we recieve the following error:
HTTP Status 404 - /CmcApp/
type Status report
message /CmcApp/
description The requested resource (/CmcApp/) is not available.
Apache Tomcat/5.5.20
Where is our mistake and how we can solve our problems?
Thank you for your support.
Regards
Lars Goldhahn
PS: Sorry for my english

Hi,
today I have uninstalled CrystalReports again and after this step I installed Integrataion Kit again.
And now I can login to the CMC. So the problem ist solved.
Regards

TS3999 Help! Trouble with my calendar and icloud.

I am having trouble with my calendar and icloud.
Customers send me meeting invites and I can accept them no problem. But if they subsequently change the date or time I get an error message:
Access to “appointment name” in “Home” in account “iCloud” is not permitted.
The server responded:
“403”
to operation CalDAVWriteEntityQueueableOperation
sometimes the time changes in my calendar, sometimes it doesn't, and my customers keep getting messages back from icloud 'accepting' the original date, not the changed date!!
It is driving me an my clients crazy! any help would be appreciated.

I had a problem specific to the Calendar on web-based Firefox (PC) Was asked for a separate sign-in I'd never seen before which didn't work. I resolved this by signing out, signing in again.

Help! Trouble with property name="jnlp.versionEnabled" value="true"/

Trouble with <property name="jnlp.versionEnabled" value="true"/> and file: protocol.
I can't get the versionEnabled flag to work with local file system URL's.
Here is code example (NanoHTTPD.java came from here -> http://elonen.iki.fi/code/nanohttpd/) :
C:\test>dir
Volume in drive C has no label.
Volume Serial Number is CCC7-E05D
Directory of C:\test
05/08/2008 10:08 AM    <DIR>          .
05/08/2008 10:08 AM    <DIR>          ..
05/08/2008 09:44 AM               109 hello.java
05/08/2008 09:57 AM               542 hello.jnlp
04/10/2008 09:52 AM            20,547 NanoHTTPD.java
               3 File(s)         21,198 bytes
               2 Dir(s) 26,610,700,288 bytes free
C:\test>type hello.java
public class hello
public static void main(String[] args)
System.out.printf("Hello world\n");
C:\test>type hello.jnlp
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="6.0+" codebase="http://localhost/" >


    <information>
        <title>hello</title>
        <vendor>hello</vendor>
        <description>hello</description>
    </information>
    <resources>
        <j2se version="1.6" />
        <property name="jnlp.versionEnabled" value="true"/>
        <jar href="hello.jar" version="1.0" />
    </resources>
    <application-desc main-class="hello"/>
</jnlp>
C:\test>javac NanoHTTPD.java hello.java
Note: NanoHTTPD.java uses or overrides a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: NanoHTTPD.java uses unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
C:\test>jar cvf hello__V1.0.jar hello.class
added manifest
adding: hello.class(in = 459) (out= 299)(deflated 34%)
C:\test>start java -cp . NanoHTTPD
C:\test>javaws http://localhost/hello.jnlpjava console output :
Java Web Start 1.6.0_10-beta
Using JRE version 1.6.0_10-beta Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\4381
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
0-5: set trace level to <n>
Hello worldchange hello.jnlp, jnlp start element to this:
<jnlp spec="6.0+" codebase="file:///C:/test" >
javaws hello.jnlpjava console output:
Java Web Start 1.6.0_10-beta
Using JRE version 1.6.0_10-beta Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\4381
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
0-5: set trace level to <n>
#### Java Web Start Error:
#### helloStacktrace in detail :
Detail ST:
java.lang.ClassNotFoundException: hello
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at com.sun.jnlp.JNLPClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)Take version out of file name:
C:\test>move hello__V1.0.jar hello.jar
C:\test>javaws hello.jnlp
java console output:
Java Web Start 1.6.0_10-beta
Using JRE version 1.6.0_10-beta Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\4381
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
0-5: set trace level to <n>
Hello world

The short answer is that e4x XML rocks!
Beyond that, consider that you are sending xml to Flex. For
any format other than e4x, Flex has to convert the xml into that
format. The precise algorithms Flex uses for this are not obvious
or published. This is why I have never liked using mx:Model. It
converts the xml into nested objects, but i have never been
comfortable predicting exactly what the resulting structure will
be.
Once you get an e4x xml node identified (toXMLString()), you
CAN predict exactly whate the data you want is going to be because
there is no conversion. And I and just very comfortable with xml.
Tracy

Trouble with installation. Need help

I have uninstalled and reinstalled 10 express on a Redhat Fedora Core 8 linux box. I cannot get it to connect to the get started page. Additionally, when I try to connect with SQLPLUS I get error message that Shared Memory Realm does not exist and Oracle is unavailable. TIA DG

Hi,
I think it is Ok for the installation, this problem you mentioned happened a lot in this forum,
you can fix it by start it up manually:
sql> connect sys as sysdba
startup;If not, you can try to restart the services at the sevices of linux OS page.
Peter
Maybe you cofigured it during installation not startup automatically when you start Fedora.

Trouble with installation Sneak Preview SAP NetWeaver 2004s

Hello,
the installation of the Sneak Preview SAP NetWeaver 2004s fails at step 3 with the following error:
ERROR 2006-02-27 16:24:27
FSL-01001 Unable to check existence of account nadine\SAPServiceNSP. Der Arbeitsstationsdienst wurde nicht gestartet.
ERROR 2006-02-27 16:24:27
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2006-02-27 16:24:27
FCO-00011 The step createAccounts with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
I've checked following points:
- OS: Windows XP Professional
- Loopback adapter is installed and working
- hosts file contains correct IP-address
- the groups SAP_NSP_LocalAdmin and SAP_NSP_GlobalAdmin were created in step 3
- I can create the accounts nspadm and SAPServiceNSP by hand (with the same user!) and the installation continues but I ran into further errors in step 4.
Who can help?
Regards Stefan

Hi , thanks for your hints .
I am thru .
What I did : create manually the user nspadm and NSPServiceAdm under Windows user.
pb was, as it is a company computer, we also have policies about what to put in passwords (capital letter, special caracters etc ...)
Now I'll see until which step I can go.
Cheers

Trouble with installation on new HD

Hi guys,
I had a bit of a problem with my mac (grey screen, flashing question mark) so i bought a copy of 10.4.3 to boot from and reinstall as I has lost my original 10.2 disc that came with my mac. When i tried to install the installer couldn't see my hard drive and it couldn't be seen on the disk utility either. So I came to the conclusion that my HD had failed, I had everything pretty much backed up onto an external usb drive so this was not too much of a concern. I decided to install a new internal drive and install my new OSX onto that and start from scratch.
Again the OSX installer couldn't see my HD, but the disk utility could. So I had to erase the disk, restore it from the CD and finally the installer cuold see the HD and I was able to install. When the installer has finished the machine reboots.
Now it does not seem to be able to get past the grey screen with the apple and the rotating disc that indicates it is loading. I have left it on for hours and it does not seem able to get onto the desktop. How long should this be taking? Have I done something wrong?
Any help would be greatly appreciated.

Yep, that would solve the problem, though usually is unnecessary. I'm glad though you found a solution which works for you. If you ever run into this again, let us know, and we'll walk you through some other suggestions.

Trouble with installation of Windows 8 with VMware 9.0

When I start the installation of Windows 8 on a new virtual machine with VMware 9.0.
Here is the message:
Your PC needs to restart.
Please hold down the power button.
Error Code: 0x0000005D
Parameters:
0x03060F0D
0x756E6547
0x49656E69
0x6c65746E
Can someone can help me?
Stephane Leblond, B.A.

Hi,
Please check if the method Carl shared helps.
Based on my understanding, the error message might be related to the hardware. If the method doesn't help, as it is a VMware virtual machine, please contact VMware support for further investigation:
VMware Support
http://www.vmware.com/support/
Thanks.
Nicholas Li
TechNet Community Support

Trouble with Installation

I have tried to install Adobe Premiere Pro CS4 as a trial on my 32-bit PC and when it tries to install it says,
Installation Error
Installation of the following components has failed:
Adobe Bridge CS4
Adobe Media Encoder CS4
To continue installing the remaining options, click Continue.
When I click continue it says this after a while,
Installation Error
Installation of the following components has failed:
Adobe Bridge CS4
Adobe Premiere Pro CS4
Adobe Encore CS4
Adobe OnLocation CS4
Adobe Media Encoder CS4
To continue installing the remaining options, click Continue.
Then it says,
Installation Failed
One or more required components of Adobe Premiere Pro CS4 failed to install correctly.
If I click More Information.
Adobe Encore CS4
Error:
Error 1603. Error 1317.An error occurred while attempting to create the directory C:\Users\abc\AppData
Adobe OnLocation CS4
Error:
Error 1603. Error 1317.An error occurred while attempting to create the directory C:\Users\abc\AppData
Adobe Premiere Pro CS4
Error:
Error 1603. Error 1317.An error occurred while attempting to create the directory C:\Users\abc\AppData
Adobe Device Central CS4
Error:
Error 2.
Adobe Dynamiclink Support
Error:
Error 2.
Adobe Extension Manager CS4
Error:
Error 1603. Error 1317.An error occurred while attempting to create the directory C:\Users\abc\AppData
Adobe Media Encoder CS4 Additional Exporter
Error:
Error 2.
Adobe Media Encoder CS4 Dolby
Error:
Error 2.
Adobe Output Module
Error:
Error 2.
Adobe Update Manager CS4
Error:
Error 1603. Error 1317.An error occurred while attempting to create the directory C:\Users\abc\AppData
Adobe XMP Panels CS4
Error:
Error 1603. Error 1317.An error occurred while attempting to create the directory C:\Users\abc\AppData
LangPack (English) for DeviceCentral
Error:
Error 2.
Photoshop Camera Raw
Error:
Error 2.
Please help me, I need this program for a school project.

>error occurred while attempting to create the directory
You must install and run using an Administrator account
Also, there is a special forum for install problems which may be able to help
http://forums.adobe.com/community/download_install_setup
Chat http://www.adobe.com/support/download-install/supportinfo/
Also, need hardware and operating system details

Trouble with installation of IDE

Hi!
I want to install an IDE. Everytime I start the installation routine of any, it keeps telling me there wasn�t any JVM found. I installed Java SDK 1.4.1 properly several times, it won�t work. Only BlueJ offered me to browse for the JVM and after giving it the right directory it worked. But I�d rather like to use Sun One Studio :/. So what to do? Ah, yes, I use Win2k and set the enviroment variables J2EE_HOME,JAVA_HOME and inserted the bin-path to PATH. Perhaps I set wrong directories?!
Whatever, could someone help me plz?
Thx
Andy

It really sucks... I just tried to deinstall the SDK in order to reinstall the new ver and to make even more sure, that I installed SDK. I started the deinstallation, a progress bar appeared, accelerated from 0 to 100 in some nanoseconds and closed. SDK is still there, as well on HD as in the registry. I can start the Deinstallation as often as I wish to, it�ll keep the same...
HELP

System Restore, trouble with installation

Hello,
I have searched and did not see this type of problem, if this is a duplicate post , sorry
I have never been to this group before and hope you can help, I will do my best to
discribe my problem.
I am working on a T61 for a friend
He messed it up and wanted to do a system restore, it did not work
He order the disks directly from Lenovo, he got a system restore, an add on, and 6 disks which I'm
assuming are the XP operating system.
I used the restore disk, first oddity
The instructions say I should be prompted for a few answers before beginning. I am not prompted,
but rather it just starts the restore, then prompts me to remove the disk and reboot.
Second oddity, when the pc boots, I get the 'ntldr is compressed message'
thanks to this group, I found the fix for this is to boot from a standard XP disk, then use restore console
to uncompress ntldr.
When I boot with my XP disk, I get to the prompt to run the restore console, when I press yes,
the system comes back with a 'no hard drive found' message.
I have run the hard disk verification utility in cmos, it reports no problems with the hard drive.
So, I am stuck at the ntldr is compressed message, I have done this procedure at least ten times, always
with the same result.
Any help would be great.
If this is not the correct place for this post, I'm sorry.

Hello TomH,
please refer to this clean install guide for XP.
You need to go into bios and turn hdd mode from AHCI to compatible, before installing from a XP cd.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Help! trouble with audio configuration

Ok, so here's my story. I got a virus that supposidly was only suppose to screw up with my msn. I did a system restore, but after that, I was no longer able to open up my iTunes. It said i had an error(-200), whatever that was. So then I removed my iTunes, and reInstalled it. But I still can't open it and now it says iTunes has detected a problem with my audio configuration. So I went to my control pannel and into my audio devices and all it really is is adjusting volumes and speakers and mics, and I don't know how to fix my iTunes problem. I just want my music back! Please help!
-Jessica

you've actually got the same error here as you had before. the -200 error displays as an "audio configuration" message in itunes 7.0.2.16.
they are typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.) so let's try swapping out your QuickTime.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Troubles with installation

as a teacher at a audiovisual institute i bought adobe cs 6 mac nl. Unfort. it does not accept my number ( i uninstalled all my previous adobe's) what to do?

The product registered under the e-mail provided here has Design standard CS3, volume license, please check the installer, the download link might be under downloads in www.licensing.adobe.com under this Adobe ID.
There are chances that the installer is bad, do check the technical specifications too as old products are not that much compatible with upgraded Operating systems.
I was unable to find any CS6, do let me know the order number to investigate further.
Regards
Rajshree

Help ASAP, Trouble with Installation

Similar Messages

Maybe you are looking for