Help.  Audio disconnect.

As I was putting the finishing touches on my movie, my hard drive unplugged. I was able to reconnect most everything but I've lost a lot of my audio in the process. I must have misconnected something and hope I didn't cause a problem that will involve realigning the audio. Can I pull of a previously saved version or will my attempt at reconnecting effect the older versions as well. Also, how can I pull up a previously saved version?

You can always try! Go to where you have your Autosave Vault located, probably in your FCE Documents folder. Hope that FCE saved a copy of your project before the drive became unplugged. Look through the files in the Autosave Vault, and if there are any before the media drive became unplugged (you can look at the time they were saved), open up the most recent one before your problem occurred. Anything you did to harm your project would probably not affect the data in the autosaves.
That being said, if your drive unplugging altered any of the source media that may have been on the drive, then any autosave file is going to be a problem because they all draw on that media.

Similar Messages

  • Help menu disconnects Elements 8

    Hi, rather than suffer with the problem I decided to find out what I can do about it, and hope you can help me. I have Elements 8 on mac. When I click on HELP and the drop down menu shows up, I click on one of the subjects and the program disconnects. I get a error message to send to Apple but I don't think it's an Apple problem but an Elements problem.
    I should say, that when I first loaded the Elements 8 program it used to do the same thing. I would open the program. Open a photo and it would disconnect. No error message to send. I would restart and it would work fine. It did this for a while then a few months ago stopped and it works fine now. A few days ago I decided to check something on the Help menu and have the above problem.
    Hope you can help.
    Thanks,
    Freda

    Sorry for the delay in response. I could not find the response button at the forum. Thank you for responding. I resolved the problem with the help of Elements Village. It was only the Help menu that was causing the problem. So far the other menu options I needed were working fine. And I am able to open photos through Bridge and edit the pics.
    Freda
    Date: Mon, 24 Jan 2011 11:57:37 -0700
    From: [email protected]
    To: [email protected]
    Subject: Help menu disconnects Elements 8
    A few questions:
    - Are you able to use the Elements in opening and editing pics?
    - Is it only the Help menu that is causing the problem?
    - Are other menu options are working fine?
    Describe the exact steps by which you are getting the issue.
    >

  • Phone disconnected/audio disconnected phone connected/audio connected

    Since the update, my 2014 toyota corolla intermittently says phone disconnected/audio disconnected then phone connected/audio connected.  Sometimes I have actually been on the phone when this happens, my calls drops and then reconnects again as if nothing happened.  I miss parts of the conversastions, one time it was actually a really important call that I was taking.

    Yes, Sky did raise the fault with BT and they stated it was a disconnected line.
    the reason was that another phone line was connected. they told them to correct the mistake as was told it was not a mistake as it was a disconnected line.
    5 hours of phone calls later to Sky and BT and the best a Sky technical Manager could offer was to reconnect with a new number for free (no 120 pound charge) still waiting for the 2 week wait for a phone number. Then I will need to wait another 4 days for internet.
    4 weeks lost in phone and internet usage becaue of an engineer error and then another error in not being able to correct a fault correctly.

  • ATI HD AUDIO DISCONNECTED?

    When I connect the laptop to a TV with an HDMI cable, I get video but no sound. In Control Panel, everything is supposedly up to date and working correctly, yet the ATI HDMI Audio is shown as disconnected. How do I get it to work?

    Hi @MINERVAH ,
    Welcome to the HP Support Community! I hope that you enjoy your time posting with us.
    I see that you are having an issue with your sound while using an HDMI cable. I will be happy to help. Here is an HP document Troubleshooting HDMI Display and Sound Issues. It will show how to set the default audio device to fix this issue.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • HELP Audio problem when setting windows volume at max and media player at max

    im using msi eclipse x58
    whenever i set my windows volume at max and media player at max also, after few seconds it suddenly not hearing audio but my media player is still playing
    on other applications like skype wenever i set windows volume at max and after few seconds of voice chat with my friend the error says audio device disconnected.
    On  game applications while playing game same thing happens audio is gone
    it is really stressful can someone pls help me out thanks

    Quote from: NovJoe on 17-February-10, 17:01:40
    Please list out your full system specs and PSU specs amps for verification first.
    My Power Supply is Cooler Master Real Power 550W
    i7 core 920
    Nvidia GTS 250
    hard drive
    320gb
    640gb
    2x 2gb 1333 ddr3 ram

  • Need help with disconnect

    I need some help with the disconnect process in Essbase. Specifically, I need a way to disconnect all current connections. The connections are created two ways: 1) using the built-in Essbase Connect dialog box, 2) the others are connections created using EssVConnect via VBA macro.The problem I'm having is that after a connection is created and the workbook or worksheet name changes, the connection is no longer associated with the workbook (and is now orphaned). As a result when I run EssVDisconnect against all open workbooks it doesn't close the orphaned connections.What can I do to sweep up and close the remaining orphaned connections? I have been playing around with EsbLogout, but that usually ends in an Excel crash.Thanks, Headtoadie

    Doug, thanks for the info. I understand everything you are saying except for this:"The intercept can be made from the Essbase menu option, which retrieves the context handle after it calls the menu connect itself, and adds the context handle to a collection"Could you elaborate a little more, please?-HT

  • Please help- Audio Cd won't mount after Update to 10.3.9

    My CD/DVD drive is MATSHITA CD-RW CW-8122. Data CDs and DVDs are mounting fine. However when I put in an audio cd it clicks a few times and soonafter ejects. Everything was fine as far as I can remember before my update to 10.3.9 (from 10.3.5, I think). I've done the list of suggestions in some of the posts (deleting preferences and cache files, permissions, pram zap) but there's no change. Please help!

    broom-z...
    "And here's what's REALLY wacky- audio CDs created on a computer (non-store bought) mount fine AND launch itunes just like normal. And the CD track names are retrieved and all that. It's only with the manufactured Audio CDs that I get this click-click - small purr- click- eject. This is any manufactured Audio CD, old or brand new."
    Hummmm--- I wonder if you are purchasing any of those copy protected audio CDs? It is the only thing I can think of that can cause that.
    ...Ron
    PS... On the other hand all this happened after an update??? Puzzling!
    Message was edited by: Ron JACKLE 2x

  • Audio disconnected

    I am trying to move a project to an external disc and the audio seems to have become disconnected from the project.
    Is there a way to re-connect it?
    The audio files are still on the hard drive but I get the warning that they are missing when I try to move it.

    See my reply to the thread [here|http://discussions.apple.com/thread.jspa?threadID=2611509&tstart=0]
    Also, you should be able to move your Project back to the internal drive and everything should work again. Then use the File/Consolidate command.
    If you used the Finder to do the initial move, you should be able to use the Finder to move it back. If you used iMovie to do the initial move, the FILE/CONSOLIDATE command should work without moving it back.
    Message was edited by: AppleMan1958

  • HELP Audio Unit scanner crashes on logic pro X when trying to load mpc studio

    Everything was running fine I could open my mpc studio up as an AU plugin and it would run smooth but as of recently I keep getting an error saying logic has to quit because it cant open my plugin .. this is the error message i receive when trying to validate my plugin
    validating Audio Unit MPC by Akai:
             AU Validation Tool
             Version: 1.6.1a1
              Copyright 2003-2011, Apple, Inc. All Rights Reserved.
             Specify -h (-help) for command options
    VALIDATING AUDIO UNIT: 'aumu' - 'MpcV' - 'AKai'
    Manufacturer String: Akai
    AudioUnit Name: MPC
    Component Version: 1.4.0 (0x10400)
    Component's Bundle Version: 0.0.0
    * * PASS
    TESTING OPEN TIMES:
    COLD:
    AudioUnitPluginInstance::getComponentDescFromFile() : /Library/Application Support/Akai/MPC/Fx/MPC60Emulator.vst
    Attempting to load VST: /Library/Application Support/Akai/MPC/Fx/MPC60Emulator.vst
    2013-08-10 17:22:28.915 auvaltool[256:f07] Error loading /Library/Application Support/Akai/MPC/Fx/MPC60Emulator.vst/Contents/MacOS/MPC60Emulator:  dlopen(/Library/Application Support/Akai/MPC/Fx/MPC60Emulator.vst/Contents/MacOS/MPC60Emulator, 265): no suitable image found.  Did find:
              /Library/Application Support/Akai/MPC/Fx/MPC60Emulator.vst/Contents/MacOS/MPC60Emulator: mach-o, but wrong architecture
    FATAL ERROR: OpenAComponent: result: -1,0xFFFFFFFF
    validation result: couldn't be opened
    If anyone can make sense of this It would gladly appreciated

    nevermind I solved the issue. I guess I had to update my mpc studio twice in order for logic to see it

  • Help Unmounting, Disconnection, Removing Camcorder Device

    Hello,
    Ive just recently bought a Canon HG10 (Harddrive HD Camcorder) and everything is working fine with iMovie and the camcorder...... except one thing. I cant figure out how to disconnect the camcorder itself!!! Ive gone through the manual, and it says:
    'DO NOT DISCONNECT THE CAMCORDER FROM POWER SOURCES AND COMPUTERS BEFORE SAFELY REMOVING THE DEVICE THROUGH THE COMPUTER' -- as it gives reasons which link to harddrive damage and such
    Okay, simple enough for a PC, however, when i looked for the magical desktop icon for the camcorder, there wasn't one, but it worked perfectly fine with imovie anyways. Which also meant that I couldnt dismount the thing "safely". I would greatly appreciate some help on this subject because i don't want to keep on just yanking the usb cord out against the will of the Canon warnings that appear in the manual every second page.
    Overall, ive never had a camcorder before in my life and i want to avoid a stupid mistake. please help, thank you!

    While I was looking for answers, I came across a link in the apple site somewhere that had a list of compatable cameras to macs, ill look for it right now....
    here it is,
    http://support.apple.com/kb/HT1014
    This is for iLife 08's iMovie though (which is what im using on my imac right now). Are you using the older generation iMovie? maybe it didnt have support for it then.
    All I do to import the videos is the following;
    1- plug in camera with usb and power plug
    2- start up imovie
    from there, it just tells me that it has found a camcorder device and asks if i want to use it for imovie. I dont actually do anything to find the camera, it finds iteself in iMovie 08'.
    More iMovie support answers, but for older version i think
    http://docs.info.apple.com/article.html?artnum=43000
    wahahahaha, found the iMovie 08' one, but still doesnt help me at all
    http://support.apple.com/kb/TS1059
    Message was edited by: Neoblackout
    Message was edited by: Neoblackout
    Message was edited by: Neoblackout
    Message was edited by: Neoblackout

  • Help Audio Sync Issues.

    DVD Studio Pro 4.x. Using Quicktimes of :30 each with the DV-NTSC codec.
    Created a menu that has 10 categories of commercials. In the "financial" item, when clicked on, it goes the first commercial...the end action is to go to the next commercial and so on. The final commercial in the series returns to the main menu.
    All the different categories worked fine except for one in the financial, and I couldn't figure it out, so I took it out. THE KEY-->once I took that spot out, the sync issue cascaded to another piece of video (chapter/track). No matter how many variations of disconnecting files, deleting files all together and re-importing, deleting rendered MPEG and AIFF files worked. Finally I gave up and edited the 9 spots together in Final Cut and created one long spot. Of course, that worked fine. No sync issues... Until my boss asked me to remove one spot from one of the other categories...then the whole sync thing happened again in that other category! ***!?!?!?
    Would I be better off squishimatizing the files in Compressor first and bringing them in seperately into DVDSP? I am probably doing something very obvious that I shouldn't be... pppppppplease help me to determine what my idiocy is.

    What format are you using in iTunes to play them back?  Are these the exact same files as the one, you are playing back in Quicktime 7?

  • Please help:  audio gaps in PAL to NTSC video conversion

    I've been trying to convert (to NTSC) and import this DVD video into FCP but the audio always has a couple of 1-2 frame gaps, usually in the same spots. I've tried using MPEG Streamclip and Handbreak.
    I'd really appreciate any advice!
    thanks.
    Stream: VTS011.VOB
    Path: /Volumes/Sample/VIDEOTS/VTS_011.VOB
    Type: VOB program stream
    Duration: 0:39:36
    Data Size: 2.55 GB
    Bit Rate: 9.22 Mbps
    Video Tracks:
    224 MPEG-2, 720 × 576, 4:3, 25 fps, 7.50 Mbps, upper field first
    Audio Tracks:
    160 PCM stereo, 48 kHz, 1.54 Mbps

    thanks for getting back to me so quickly Jim. I really appreciate it.
    I'm trying to convert a video so that I can edit it and put some titles in for a friend. When I volunteered to help I didn't realize the DVD was PAL. I've always been able to convert and edit without Compressor so unfortunately I don't know how to use it. Would Compressor correct the audio gaps? Is the program a quick learn?
    In Streamclip I've been using "export to DV" and deinterlaced it.

  • Please help! disconnected from verizon services accidently

    when i went to "my verizon" i accidently clicked change plan and when i switched it back iit says my phone is not connected to service. ive tried looking for something that says my plan was canceled or something but it says my account is still active... what do i do???

    Help is here for you, alanb1995! Since there's no way to disconnect service through My Verizon, I'm confident we can turn this around. Are you still able to place and receive calls on your phone? Have you tried to log out and log back into My Verizon to confirm if there was a change to your device or plan? We know mistakes can happen, which is why there's more than one click required to complete a plan or equipment change on your account.   JenniferH_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • HELP audio is slower importing  it to GB

    Im making a movie, right now i want to edit the audio of the recording but i have separated the audio and the video, so i import the video to GB and everything is ok, but when i try to import the audio it starts playing it slower than it realy is, so the video and the audio never mach
    anyone can help please?
    oh i cant import video and audio at the same time cause i dont have the original recording, i just have the copy of the video and the copy of the audio separated, cause thats how they give it to me

    http://www.bulletsandbones.com/GB/GBFAQ.html#tooslow

  • Help - Audio in just one side, screen is dying

    Hey,
    I've been having problems lately with my ipod, it didn't fall or anything but now I can only hear it through one side (it's not the headphones, I checked), and there is a weird black line across the screen... also, if you press the screen, it flickers.
    Has anyone had this problem?

    Sounds like your headphone jack on the iPod might be broken or bent, so when you put the headphones in they are not making full contact inside the port, making it seem as if the audio is fading in or out, or sometimes just not playing at all. As for a fix, the only thing I can suggest is bringing it to the Apple store and having them check it out.
    Regards--- jgurbisz
    If I helped... please mark as helpful or solved

Maybe you are looking for

  • IPhoto hangs when I try to empty iPhoto trash.

    I had a lot of photos in my iPhoto library. I saved them to an external hard drive, then deleted most of them from  my computer. Except, they're still somewhere on my computer's hard drive. When I try to empty the iPhoto trash, the program goes into

  • P35 Strange noise

    I noticed a strange whistle noise coming from the pc when the cpu is oc-ed and I run orthos or intel burn test. The noise amplifies with the raise of the cpu frequency but only manifests on high loads(with orthos, intel burn test). Can someone with a

  • Convergence View Attachment

    In Convergence I notice the choice to view or save attachments . Some attachments the browser can view. Some, like .xls & .pdf the browser tries to display but fails (the user sees gibberish). However it knows to try to save or open (with an unzip pr

  • Reoccurring Java update window

    Since updating my 15" (mid 2009) MacPro laptop to Yosemite OS 10.10, I get window every time after start up suggesting that I need to update Java.  I followed instructions and updated Java to Standard Edition Version 8 Update 25, but the warning wind

  • Error : create release strategy

    define release procedure for po-> release strategies->classification->purchase organization i gave value  7,it changes to red colour error is inconsitent. any one answer for this error .