Help!! Auto-Deploy and Check For Updates in an OPMN-managed instance
I'm trying to use the auto-deploy and check for updates functions in an OAS 10.1.0.3 but I can not make it work.
I don't Know if this functions are only availables for a standalone OC4J instance.
Can anyone help me??
Thanks!!! and sorry for my poor english.
Auto-Deploy is not really designed for an OPMN managed instance -- in earlier releases, this would not even work correctly since deployments where stored in the DCM subsystem and any subsequent configuration changes made via DCM would overwrite the config and you'd lose the "auto-deployed" application.
In 10.1.3.x where DCM is no longer in the picture, and the auto-deploy polling is a function of Oc4J itself, it may work. Be aware that this is not something that is tested in OPMN managed environments.
What configuration changes have you made?
You need to ensure you have modified server.xml so the attribute check-for-updates="all" and you've added the attribute application-auto-deploy-directory and have it pointing at a directory to watch.
-steve-
Similar Messages
-
When the iPhone 4 with IOS 5 is connected by cable to iTunes and check for update results in Error 1630, plz help me to update plz
My Iphone 4 crashed yesterday after a restart and upload of OS 5.0, it will only partially sync. It's not transferring any of my music or ringtones. They still appear when I click open the sync screens on ITunes, but I don't seem to have an Ipod function and only one of my personalized ringtones transfers on the actual phone.
-
My ipod is failing the sync diagnostic on my Windows 7. The troubleshooting guide say go to the Summary Tab and "check for updates" I can't find a summary tab. I have no problem sync with windows vista.
chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do. -
I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?
Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone. -
What can I do to change the sound of a track in garageband? It is "stuck" on electric piano setting and will not change. I've tried restarting, restoring sound library, full key reset, and checked for updates.
Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W -
Ive clicked on help to check for updates, the update I needed came up so I clicked update and nothing happened, what do I do?
Going by your profile your Mac has v10.5.8 installed. That is the most recent version available for Leopard.
You may be able to upgrade to v10.6 Snow Leopard > Mac OS X v10.6 Snow Leopard - Technical Specifications
Snow Leopard is available for purchase from the Apple online store > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
With Snow Leopard installed, iTunes would be updated for you. -
Fixes to see CD's in ITunes and check for updates
I was having two problems with ITunes after upgrading to version 6. CD's wouldn't show up in itunes and if i checked for updates it would say "the itunes server can not be contacted, please check your internet or try again later" My internet connection was working fine.
The solution that fixed both was with Norton Internet Security but I would guess similar software could cause the same problem. Go to Norton Internet security, click on status and settings; personal firewall; configure button; programs tab; select apple itunes and change from blocked to automatic or permit all, clicked ok and relauched itunes.
I actually thought it would only fix the update issue but was pleasantly suprised that ITunes can see cd's again. I hope this helps.well done, Herman!
I actually thought it would only fix the update issue but was pleasantly suprised that ITunes can see cd's again.
yep ... you're about the third person i've seen accidentally solve a CD recognition problem by fixing their other Norton problems. i'm starting to ask people about Norton if they don't get CDs showing up in their source lists ...
love, b -
I have installed itunes 10.7 several times, all goes well. After reeboot, I go to check for updates and it still wants to update to version 10.7! I cant sync to my iphone4 because I get an error message saying I need version 10.6.3 or later. Help
Thank you for getting me started on the track by mentioning "Revo" Uninstaller. The results of "Revo" spoke volumns on why a successful install of ITunes is so difficult to achieve. It is the evil "BONJOUR".
I then tripped upon the following site by Apple and the detailed directions (I read, printed, re-read and followed the instructions. It was intense) brought a successful ITunes, Quick Time and the lovely Bonjour home. Thank you for the start JD42.
http://support.apple.com/kb/HT1923 -
How do I allow offline use AND check for updates if online?
I am actually not sure if this is a bug or not, as the behavior changed when I updated from 1.6u20 to u21. I have an application in a single JAR, and a JNLP file. I am testing with Windows 7 64-bit (with both the 32- and 64-bit version of the JVM installed, 1.6u20-b06 on both). The application cache is enabled. Here is my JNLP file:
<?xml version="1.0" encoding="us-ascii"?>
<jnlp
spec="6.0+"
codebase="http://hidden"
href="Librarian.jnlp">
<information>
<title>Librarian</title>
<vendor>Vendor</vendor>
<homepage href="http://hidden"/>
<description>Description.</description>
<offline-allowed/>
<shortcut online="false">
<desktop/>
<menu submenu="Vendor"/>
</shortcut>
<icon href="Librarian.gif"/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.6+"/>
<jar href="Librarian.jar" main="true"/>
</resources>
<application-desc main-class="com.vendor.apps.librarian.Librarian"/>
</jnlp>I am observing the following behavior wrt updates and allow-offline:
When allow-offline is present:
- JWS does not download updates to the JAR file when the desktop link is clicked.
- The application can run when I disable the network connection.
- The "-offline" switch is passed to javaw in the desktop shortcut.
When allow-offline is not present:
- JWS does download JAR updates when the desktop link is clicked.
- The application can not run when I disable the network connection (HostNotFoundException).
- The "-offline" switch is not passed to javaw in the desktop shortcut.
What I want to happen is for JWS to check for updates if it can, and if it times out, instead of barfing, just go ahead and run the cached version. What I can get right now is either no updates + offline allowed, or updates + offline disallowed. However, I can obtain the behavior I want if I specify allow-offline then hand-edit the desktop shortcut and remove "-offline":
When allow-offline is present but I remove "-offline" from the desktop shortcut:
- JWS does download updates to the JAR file.
- The application can run when I disable the network connection, after a short timeout.
Now, I was under the impression that this behavior is the intended behavior of allow-offline: attempt to download update, on error, silently start the cached version instead. This does not seem to be the case. I actually wonder if this is a bug, as with 1.6u20, it seemed to download JAR updates just fine when allow-offline was specified (I had issues when the cache was disabled with 1.6u20, and so I moved to u21).
How can I make this work the way I want without having to hand edit the desktop shortcut?
Is this a bug, or am I misconfiguring (OED says this is a real word!) the application?
Is there something else I have to do to indicate that the JAR is updated besides just uploading a new version to the server?
It should be noted that I am not doing any web page magic here, I'm testing by simply downloading the JNLP file off the server and opening it. This is actually my first JWS experience and I haven't gotten to properly embedding it in a web page yet. I do not know if this is significant or not.
Thanks!
MWell, I solved that quick. I've been staring at it for over an hour but it popped out at me as soon as I looked at my JNLP file in my post here (guess it's the red text, heh).
All I need to do is set online="true" in the shortcut, and also specify allow-offline, and all works exactly as I want it to. :-)
Perhaps it was a bug in u20 that was causing it to check for updates anyways even with an offline shortcut... I'm not sure, and I don't have it in me to test it any more at the moment.
Thanks,
M -
I check my plug-is for updates once a week, yet as of today, despite the fact that my plug-ins are all still there in Tools, plug-ins, after I click on the find updates button, I get the usual screen that tells me Firefox is checking for updates to my plug-ins, but then I get the message saying 'No plug-ins detected.' This has never happened before and it means I can't check for updates to my plug-ins.
There is a fault with the plugin check service, Mozilla are looking into it.
-
Adobe Application Updates, CC says no. Go to Bridge and check for updates, 2 updates available.
So this morning on all our systems, Adobe Application Update notifies us of 2 updates, but when I open CC it shows nothing. So I open Bridge and say check for updates and sure enough there are photoshop updates available for download. Is this normal? Or is the CC application not working for some reason?
TDRonline, Looks like CC desktop app was not able to detect the update for some reason. Might be some temporary issue.
Would suggest you to sign out and sign in back and then check. -
Add-on manager's check for updates is broken.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1. If you want those asss you need a newer model iPod
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
Help on Procedure and trigger for updating(urgent please)
SQL> / Table A
CTUT_ID CTUT_COMPANY_NAME CURRT_USER_ID FMIS_ID CREATE_DA UPDATE_BY UPDATE_DATE
1234 A 15-APR-03
2222 B 15-APR-03
3333 C 15-APR-03
4444 D 15-APR-03
5555 E 15-APR-03
6666 F 15-APR-03
150282 G oRACLE 23-APR-03
1 H 15-APR-03
2 I 15-APR-03
3 J 15-APR-03
150343 K TIGER 24-APR-03
150305 L EXAMPLE 23-APR-03
150342 M SCOTT 24-APR-03
sQL >/ Table B
Empno Empname UPDATE_BY UPDATE_DATE
1 AA
2 BB
3 CC
4 DD
What i need to do is i need to create an update trigger on both tables
like create a procedure
1)In procedure i need to check like
IF TABLEA.CURRT_USER_ID = (SELECT USER FROM DUAL)
THEN
UPDATE_BY = (CURRENT_USER_ID of CTUT_ID)
FOR EXAMPLE CURRENT USER_ID IS SCOTT THEN
UPDATE_BY = 150342
UPDATE_DATE = SYSDATE
ELSIF
UPDATE_BY <=> (CURRENT_USER_ID of CTUT_ID)
THEN
MESSAGE('USER IS NOT IN TABLE);
END IF;
and call that procedure in the update triggers
FOR BOTH TABLES TABLEA,TABLEB
i CREATED A PROCEDURE BUT IT IS NOT WORKING
ANY HELP PLEASE
CREATE OR REPLACE PROCEDURE UPDATE(
UPDATE_DATE out DATE,
UPDATE_BY out VARCHAR2)
IS
Uuser varchar2(20);
Udate date;
Ufound number(1);
BEGIN
SELECT USER,SYSDATE
INTO Uuser,Udate from dual;
SELECT count(*),CTUT_ID into Ufound,Uctut_id
FROM TABLEA
WHERE CURRT_USER_ID = Uuser
Group by Ctut_id;
IF (UFOUND = 1) THEN
UPDATE_DATE := UDATE;
UPDATE_BY := UCTUT_ID;
END IF;
EXCEPTION WHEN NO_DATA_FOUND THEN
RAISE_APPLICATION_ERROR(-20001,'User Does not Exist');
END UPD_CONSTITUENT;
CREATE A TRIGGER :
CREATE OR REPLACE TRIGGER TU
BEFORE INSERT ON TABLEA
FOR EACH ROW
BEGIN
UPDATE(:NEW.update_date,
:NEW.update_BY);
END IF;
END;
SQL> update TABLEA
2 set CTUT_COMPANY_NAME = 'SCOTT TEST'
3 WHERE FMIS_USER_ID = 'N';
update TABLEA
ERROR at line 1:
ORA-04091: table TABLEA is mutating, trigger/function may not see it
ORA-06512: at "UPDATE", line 12
ORA-06512: at "TU", line 1
ORA-04088: error during execution of trigger 'TU'Hi Mara,
You are right thats what i want
I have a table A
EmpNo Empname Currtuser_id Update_date Updateby
1 Denis Oracle
2 Scott Scott
3 Mara MMara
1)what i need to do is when any user tries to update the table Table A
Then the Trigger or procedure should check whether user is exits in table A in column currtuser_id
If his user id exits in table A
Then allow him to update the TABLE A
and insert his EMPNO in UPDATE_BY
and SYSDATE in UPDATE_BY
He will do all this process using forms
But i need to have trigger or procedure in database level for table
2) I have another table like 10 tables
Suppose TABLE B
When user tries to update TABLE B
Then the Trigger or procedure should check whether user is exits in table A in column currtuser_id
If his user id exits in table A
Then allow him to update the TABLE B
and insert his EMPNO in UPDATE_BY
and SYSDATE in UPDATE_BY
3) I need to have a common Procedure and call that procedure in all tables in UPDATE TRIGGER
Thanks for your help
Thanks -
Can't get the screen back to normal mode after restoring it, and it still gets very hot at the top when using it in any mode. Any suggestions?
Can't get the screen back to normal mode after restoring it, and it still gets very hot at the top when using it in any mode. Any suggestions?
-
It's really annoying because i have a lot of things I want to put onto it but icloud isn't working either....
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Maybe you are looking for
-
BIP: Upload error (Invalid BI Publisher Security model SBL-RPT-50532)
Hi, We have Siebel 8.1.1.5 running and having trouble integrating with BI Publisher 10.1.3.4.2 . I have setup and configure BIP as per the instructions. When we try to upload reports from Reports - Standard Templates View, getting the following error
-
I can't preview svg files in bridge cs6 on mac 10.6.8. Help!
Hi, I want to know why can't I preview svg files in bridge cs6 on mac 10.6.8. It's really frustrating as an increasing number of Illustrator files are saved in this format and I need to check through a gazillion of them. Help!
-
The volume on my Macbook Pro is not working ?
I've checked the settings in System Preferences and it seems everything should be working with my volume. NO GO! Help please
-
EMIGALL Distributed Schedule Job - Getting Error
Currently I Placed migration formatted file and try to execute the "distributed import" i am getting error,"Object in import-file header does not correspond to the migration object". Same file i am able to execute thru REMIG_SPLIT_SUBMIT report succe
-
View change log for crm : opportunity management, activity management
hello can anyone help me, i have been tracking down someone who changed an opportunity in crm but i cannot find in scu3. thanks.