Help ! Batch Capture won't capture . FCP 5 & Kona 3

When I select any offline clip and try to batch capture it - the machine seems to be working fine, cues up the deck at the start of the clip, rolls away - the capture screen appears but then everything just keeps rolling - ie it doesnt stop when it reaches the tc out point of the clip. I eventually have to abort and the offline clip remains offline.
Capture Now on the fly works fine.
This is a new G5 Quad running the latest OS with FCP5 capturing from a Digibeta PAL Sony deck with RS 422 control thru the AJA BOB to a Kona 3 Card. I havce full deck control as normal thru the Log & Capture window.
Any help would be appreciated.

Do you have the latest Kona drivers? What are you capturing to? What codec are you using?
Patrick

Similar Messages

Image Capture won't capture (Canon 9950F)

I have recently bought a Canon 9950F for a specific project. It replaced an Epson Perfection 2450 Photo which worked perfectly but was limited in the size (area) of its film scanning capabilities. I have used a range of software including VueScan and Silverfast v6.6 but the most direct scanning tool I have used is Image Capture. The feature that I really like with Image Capture is the ability to select multiple scan areas in the 'preview' and have Image Capture scan them as a batch. The project I am working on (family archive photos, documents and film negs of various formats) really makes the most of this feature.
I have moved over to the Canon 9950F and immediately noticed that Image Capture does not see the film scanning feature of the 9950F. It scans documents exactly as the Epson 2450 did but does not offer the option of scanning film or transparency, only documents on the flatbed. I have updated the Canon Drivers and the scanner is visible under System Prefs > Printers. VueScan and SilverFast recognise the scanner (but neither have the selectable scanning feature that Image Capture offers) and Photoshop Elements 10 also sees the scanner under File > Import.
Has anyone experienced this problem and, if so, is there a 'work around'.
Many thanks.
iMac 24", Intel Core 2 Duo, 3Gb RAM, OS10.6.8,

Thanks PAHU that were a lot of drivers for sure in your link and I installed those. Unfortunately, nor the driver package nor the ICA driver did solve my problem. I'm beginning to think it might just be a bug within Image Capture, although Image Capture is stating the scanner is reporting an error. Strange thing is that Image Capture will work fine as long as I hide the details pane.
It seems to be an isolated problem too as I can't find any other subject on this on the net. I see more people having trouble to scan images with Image Capture but that's mostly related to not selecting the right part of the preview. I will see if I can reinstall Image Capture from the OSX dvd.

Screen Capture won't capture window

Hello, I'm using Snow Leopard on a Mac Mini with a single monitor. When using the screen capture keyboard commands, I can do everything except for capturing a window. I'm supposed to be able to hit command+shift+4, and then spacebar, and the pointer will change into a camera that will capture only the window I click with it. I recall being able to do this a long time ago, before I upgraded to Snow Leopard. I also use a widget called Screenshot Plus that acts as a front-end to those keyboard functions.
When I try these days, the cursor changes into a camera, but the entire screen is highlighted as if it will be selected. When I click, what gets captured is a blank white area the full size of my screen. The Screenshot Pro widget produces the same incorrect result.
I've seen another discussion about this topic, but it seemed to center on the Grab utility. On my system, Grab works correctly, including the window capture function. So I have a way to get the results I want, but I would be interested in a solution that allows me to use the keyboard method again. Thank you.
Mike

Noondaywitch, I created a test account and screen capture of windows worked correctly in it. Thank you!
So now I need to look for something about my account. I'm going to try disabling all startup items and see what happens.
UPDATE: Disabling all startup items and rebooting fixed the problem. The window capture function now works in my user account. Now I can put startup items back one by one to see which one might have caused the issue.
Thanks to all who gave advice.

FCP runs on Intel Mac Mini, but won't capture to external drive, HELP!!

Installed FCP 5.1 on Mac Mini Core Duo and it runs fine. It will capture fine too, but only to the main harddrive. If I plug in a firewire harddrive using a firewire hub it won't capture, and give a "No Video" error in the Log and Capture window. I've used both popwered and unpowered firewire hubs, and even tried daisy chaining the camcorder off the harddrive. Nothing has worked. And there is no space on the main harddrive to capture to.
I know there is a lot of speculation about whether FCP would even run on a Mini, but it will. If only I could capture it would be a reat capturing station. Has anyone had success? Its pretty frustrating as I've used the Power PC Mac Mini for capturing in FCP 5.0 without any problems. Why would apple make the new Mini crapier?

Never use FW hubs when capturing video. They only lead to grief.
Some cameras, particularly Canons, refuse to share the FW bus with anything. Could this be your problem?
If so, there is little I can think of to do with a Mini (or an iMac for that matter) beyond capturing from a different deck/camera that is more social than the Canons and their brethren. You only get the one FW bus.
But first thing to try is to get rid of the hub. Hook your fw drive to the computer and your camera to the FW drive.
Post back,
Patrick

FCP runs on Intel Mac Mini but Won't capture, HELP!

Installed FCP 5.1 on Mac Mini Core Duo and it runs fine. It will capture fine too, but only to the main harddrive. If I plug in a firewire harddrive using a firewire hub it won't capture, and give a "No Video" error in the Log and Capture window. I've used both popwered and unpowered firewire hubs, and even tried daisy chaining the camcorder off the harddrive. Nothing has worked. And there is no space on the main harddrive to capture to.
I know there is a lot of speculation about whether FCP would even run on a Mini, but it will. If only I could capture it would be a reat capturing station. Has anyone had success? Its pretty frustrating as I've used the Power PC Mac Mini for capturing in FCP 5.0 without any problems. Why would apple make the new Mini crapier?
Intel mini core duo Mac OS X (10.4.6)

I would recommend you post your topic in the Final Cut Pro forum. However, since the Intel-based Mac mini is not supported, it may simply not work.
-Doug

BATCH CAPTURE TAPELESS workflow still FCP is looking for a capture device when going ONLINE

Hi,
I am working on a documentary and about to go online with my edit.
I used Sony FS100. Tapeless. I did Log and Transfer to ProRes 422 in FCP 7.
Later when I run out of space I used Media Manager to RECOMPRESS everything to ProRes Proxi. Worked well.
But now when I try to batch capture to ProRes 422 FCP is looking for a capture device thinking I am working with tapes.
How do I make FCP undrerstand I am tapeless? Does the recompress kill the possibility of bach capturing back to online full quality 422?
Thanks for the support!
Gabor

I have read through some more forums and I only found one mention of the Media Manager 'Recomress' function.
It said:
"Transcoding with MM (recompress). It preserves timecode/reel name, file names, etc... Except the clip ID, which is used along with reel name and timecode to batch capture from source files (at least for P2)."
Clip ID is the metadata relyable for the work of batch capture. It seems without it it is impossible to batch capture.
I wonder why they designed Recompress like that, if it is true?

I have just upgraded from the old G5 to a new one, however I can't log and capture on the newest FCPs off my Sony Z1.. please help, deadline coming soon

I have recently just upgraded from my old white powerpc G5 which did not allow me to edit in HD and I had to down convert all my footage to edit in DV. I have bought the newest FCP studio, and I had to order a new firewire as my new desktop does not take the old one that I had before. The new firewire that I have which is the only one that fits into my iMac from my sony Z1 is a Firewire IEEE1394-B (800) 9 pin to 4 pin .
My Mac : Processor- 2.8 GHz Intel Core i5
Memory- 4GB 1333 MHz DDR3
All my settings are set to HD and the ilink convert is off, and VCR is set to auto. Why is it not reading my Z1???
Please someone help me, i have been using FCP for years now and have not come across this problem before...

camera not recognised in system profiler just says maximum speed up to 800mb/sec
still says "unable to locate the following external devices:
HDV (1440x1080) 50i" in FCP when i try easy setup
Try a different cable first ... it might be a connection problem
VCR HDV/DV- Auto
Component- 1080i/576i
i.link convert- off
down convert letter box
A/V-DV OUT- off
Bit of guesswork here - haven't used a Sony in a while - but try these:
• HDV/DV to HDV
• downconvert off/none?
mish

5.1.2 Won't capture from DSR-11

I performed the software updates last night; should've checked the reviews on this one first. Today, FCP won't Capture Now from my DSR-11. The capture now screen comes up black with the apple logo. Underneath it says, "Waiting for timecode. Device must be in VTR mode when Device Control is enabled." I hit escape. The device is being controlled by FCP because I am able to rewind the tapes using the computer. As far as I can tell, the DSR-11 is in VTR mode. I tried switching the device control to firewire basic, but no change. I switched it to non-controllable device and that does work, but is a pain in the neck. Can I switch back to 5.1.1?

Here's what I did:
The tape was partially used. I rewound a bit and got a time code of 15:45:01. I used that as the out point and typed in 100 as the in point. I rewound the tape and logged the clip offline. I then tried to batch capture the clip and received the following error:
Batch Capture: Timecode Error: Unable to located specified timecode. You may have specified a timecode with insufficient room for a pre/post roll operaation.
What did I do wrong?
FYI, I did the quicktime fix suggested on another thread, which did nothing for me. What I did was trash old packages of QT from the library/receipts. Then I reinstalled QT.

My sony hdv 1080i mini dv camera won't capture

I've been trying to capture a video that I recorded with my SONY (HDV) HDR-FX1E camera from sony hdv 1080i mini dv but the camera would go on playing but it won't display any frame and it would show this error when i click stop stating that "recorder captured no frames". When its playing from the sony hdv 1080i mini dv camera it shows DV SP PAL on the lcd monitor.
PLEASE, someone should help me, I need to capture this video now.

As far as I know, HDV does not display during transfter from camcorder via Firewire
Try this for HD capture http://strony.aster.pl/paviko/hdvsplit.htm

9550 storm won't capture all contact info when synced.

My 9550 storm won't capture all my contacts information when it is synced with my contact manager (Agent Office). It misses cell and work phone numbers? Any help is appreciated

My 9550 storm won't capture all my contacts information when it is synced with my contact manager (Agent Office). It misses cell and work phone numbers? Any help is appreciated

Camera won't capture credit card for Apple pay

When I attempt to use the little blue camera icon option in Apple Pay to capture a credit card and it's info, nothing happens. The camera won't capture a picture of my credit card. I hold my phone camera hovering very still over my credit card making it's sure it's within the guideline over and over and nothing happens.
I know my bank and my credit card support Apple Pay.

Hi ...
Make sure your iPhone is updated to iOS 8.1
Tap Settings > General > Software Update
If it's already running 8.1, try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings then try again.
Instructions for setting up Apple Pay > Apple Pay

Pixelated tape won't capture

I'm capturing a large project - about 40 tapes - and one of them is thoroughly pixelated and won't capture. It has bands of green and magenta along the left side and most of the tape has rippling pixels. The other tapes captured easily.
Clearly it's a problem with the tape. Does anyone have a thought on how to capture all or parts of a damaged tape?
Thanks, SHC

If Johnny's suggestion doesn't work, you could also try playing it back through the camera into the deck, then bring in the signal from the deck. This might give you a technically clean video signal that FCP will accept, although you will still have the banding and pixelization. If you have a frame sync that would work even better, or any other piece of equipment that will act as a frame sync.
We are all assuming that this is critical footage you need for the project and can't be reshot so you are willing to compromise quality to keep this footage.

Image Capture won't scan: Canon MP 610

Hello,
I experience a strange bug in Image Capture which I use together with my Canon MP610. When I put a document on the scanner Image Capture will show a preview and then scan the document. This works fine.
Sometimes I need to make some manual corrections by using the button "show details" and then resize the scan area after the program has analyzed the picture. After I made the corrections I hit the "Scan" button but Image Capture will return with the message "Scanner has reported an error" and "An error occurred during scanning".
I first thought it might be a driver related problem as I recently updated the drivers from the Canon site. Before I installed the Canon drivers and used the OSX drivers all worked fine.
So I removed all drivers from Canon and hoped the Mac would use the old drivers again. That didn't work either as the system couldn't seem to find any usable driver anymore. I reinstalled the Canon drivers and all works well again except for the Image Capture program.
As long as I don't use the "Show Details" button the scanner works just fine. But as soon as I make some manual corrections the scanner error message pops up and the scanner won't scan the adjusted preview.
So I know for sure the Mac sees the scanner and can control it as the scanner does deliver the images to the folder I specify, but I can't do any manual corrections.
I already deleted the file "com.apple.ImageCaptureApp.plist" but that didn't solve the problem. It appears to be a bug in the program itself or a conflict between the app and the drivers from Canon. How can I revert back to the drivers that my Mac used before I installed the Canon drivers?
Thanks!

Thanks PAHU that were a lot of drivers for sure in your link and I installed those. Unfortunately, nor the driver package nor the ICA driver did solve my problem. I'm beginning to think it might just be a bug within Image Capture, although Image Capture is stating the scanner is reporting an error. Strange thing is that Image Capture will work fine as long as I hide the details pane.
It seems to be an isolated problem too as I can't find any other subject on this on the net. I see more people having trouble to scan images with Image Capture but that's mostly related to not selecting the right part of the preview. I will see if I can reinstall Image Capture from the OSX dvd.

Image Capture won't recognize camera under other user log in

Image Capture won't recognize cameras under another other users log in on the same computer even though it works perfectly under the main user log in. Can some body hep me pleeze? What am I doing wrong or how can I let my daughter use her digital camera under her log in?
Power Mac G-5 Dual 1.8 Mac OS X (10.3.9) 80gbMaindrive,250gbSeagate/1gb ram/128mb vram

Hi G-Man,
It's probably something in the Preferences folder; Users/herusername/Library/Preferences. Start by removing com.apple.ImageCaptureApp.plist and trying again. If that doesn't do it drag the entire Preference folder to the desktop, log out and back in. Launch it again and if it works you can either reset preferences for all System Preferences and apps or drag the preferences files a group at a time back to the new Preference folder in Library and test Image Capture each time. That way you can narrow it down to the one offending preference file.
John

Image capture won't recognize my ScanSnap iX500. How do I make them work together?

Image capture won't recognize my ScanSnap iX500. How do I make them work together?

To use Image Capture you need an ICA driver for your scanner. Checking the Fujitsu web site for drivers for the iX500 I only see a ScanSnap manager for OS X. No mention of an ICA driver. So you may need to contact your local Fujitsu support.

Help ! Batch Capture won't capture . FCP 5 & Kona 3

Similar Messages

Maybe you are looking for