HELP! BB Pearl 8130. Solid Red Led Light. Won't go away.. HELP!

My LED has turned a solid Red color. It's on all the time and is only off when I pull the battery out. My phone does still charge. I've done everything to get rid of it even wiping my blackberry and upgrading the software. I read something about Blackberry Music Gateway? I do use my pearl to listen to Pandora everyday and iheart radio with a 3.5 cable that plugs into the dash of my truck, but it never did this before. Any help would be greatly appreciated!
Thanks!
Justin

Justin, so you've wiped the device completely and reloaded a new OS... still does the same. Anytime the BlackBerry is powerd on, the LED lights up RED?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Turn red LED light off

Is there an option or registry edit that will turn off the red led light that dots the "i" in ThinkPad on the top of the laptop? I have a SL500.

Hi adoman,
I suggest putting following sticker on it, you'll never notice it's there:- http://cgi.ebay.com/Original-IBM-Lenovo-Sticker-11-x-30mm-127_W0QQitemZ350223067619QQcmdZViewItemQQp...
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

My bb curve 9380 shutdown and a red led lighting

my bb curve 9380 shutdown and a red led lighting i don't now what hapned but i just modify some apps bay bb desktop softwere please help me and thx verry much

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
If the problem is revealed via the above tests to be your BB, then I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BlackBerry Z3 does not Boot, red LED Light is flashing 1x long and after 6x short

After updating my Blackbery Z3 to 10.3.1.1779, my device won't boot and  red LED Light is flashing 1x long and after 6x short. Need help to solve the issue. Thanks in advance.

Thank you for your update.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Red LED Light Remains On

The battery is fully charged and disconnected from charger. When hibernating, the red LED light constantly remains on. When the phone is being used, the red LED light does not appear.
What is wrong? How can this be fixed? Thanks much for help.

I'm a total newbie to smartphones. Based on your question, I cleared all the Notifications and the red LED disappeared. Then sent myself an email to test the blue LED light and it is now blinking. So, the problem might be solved but don;t know why the red LED constantly displayed after charging the battering to 100%.
Don't know about Lightflow!
Thanks

Red Led Light

Hi, I have bought this laptop which is fairly new, just under a year. Although now, there is an red Led light on the side of my laptop when I plug in my Ac Adaptor to charge the battery and it is not going. The Led Light was always a bright white light but now it just stays red and I dont know why? Is there a problem with my laptop? because it is working fine. I dont know how to solve the red led light or what it means. I hope I can get some information about this. Thank You.

jpdvid-
Did you try starting the Mac back up after installing the RAM and before installing the card? Many times a PMU reset is needed after RAM is installed.
Which model of Rocket Raid card are you installing?
Luck-
-DaddyPaycheck

4 Red Led Lights - Please help

the other day I left my computer on for a few hours and when I came home and moved the mouse it wouldn't come out of standby. To get it to shut off, I had to hold the power button down. Now when I start it, the fans start spinning, the DVD drive spins for a second and a few times the orange light on the monitor turned green. But after about 10 seconds, it shuts down.
I have the 4 red lights on the LED, so I swapped in a new PS - Enermax 550W with 36A on the 12v. Still same thing. So I'm guessing either the CPU or the board. I built this about 6 months ago. It's not overclocked and it was idle during the time I left it. Any suggestions?

Yes and no. I know that is confussing. However go to this first as you may have had a problem right along and did not know it nor would you without testing. Memtest86 is a great way to test memory. The no part is that it could be something else. But hey you have to start somewhere.
As for the timings in RAM you need to go to Corsairs page and check the exact model on their charts. Also be sure to read any side notes as they may have specific timings for your A64 versus other CPU's. It can be different as the memory controller is on the CPU in our case instead of on the MB.
Corsair also has tech support that can walk you through memory timings if you don't follow them at all.
You can also have some other thing in the system that went bad even as simple as a HDD cable that came loose. To troubleshoot sometimes the easiest way to find out is to unplug anything that is not needed to boot.
But start with the memory as the 4 Red LED's indicate.

8830 Will not charge, shows solid red LED when connected

I plugged my phone in to my wall charger Saturday night as I always do-Sunday morning the phone was dead and would not turn on. It shows a solid red light on the LED.
I cannot seem to get it to charge. Briefly, the charging battery icon showed up on the screen, but now it went out. Just sitting there, every once in a while the LED goes out.
Help, anyone? I've tried taking out the battery and reinserting both with the phone plugged in and not.

I had same problem except I discovered that as long as I did not let the battery fully die, it would charge with no issues. But if it died completely, I would get the red light briefly, it would go out and then lightning bolt on battery would show up but no charge at all.

Mysterious red LED light inside my G4

Could someone tell me what the red light means on the inside of my G4?
It can't be seen from the outside.
I am having a problem with my firewire ports not working. Is this a warning or alert of some kind?
Help! I really looked and can't find this info anywhere!

From the G4 Service Manual:
Logic Board LEDs: Power Mac G4 (AGP Graphics)
There is one red LED on the Power Mac G4 (AGP Graphics) logic
board. It indicates that there is power to the board and does not imply a fault condition. Hardware such as DIMMs and PCI cards should not be installed or removed when the LED is on.
Cheers, Tom

Playbook will not charge, no red LED light

The Battery charge said 3%. I turned off the playbook and plugged it in and left it to charge with the LED lights showing. I went to retrieve it, only to find out it's not turning on. No red light appeared. nothing. I went and plugged it in and then tried turning it on Nothing.No red light...just dead. PS: I just got the Playbook from relative without the manual and all so i'm not sure about the DO's and DON"T's of using the tablet. Please help!!! Thanks in Advance.

Your battery is dead. http://www.blackberry.com/btsc/KB27705
Try this:
Connect the charger that came with the PlayBook and plug it into the wall. Hold down the Power Button only for 20 seconds. Leave it for 4 minutes, then unplug at the wall, wait a minute, plug it back in again, hold down the Power Button only for 20 seconds.
Repeat this process about 10 times and hopefully, your PlayBook should go into a high charging rate. Leave it plugged in overnight and you should have a full charge by morning.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Playbook will not boot - solid red LED for 10s

My Playbook went dead last week. Put it on the wall charger for many hours and the thing will not boot. Now, all I get when I plug it in to the wall charger, or computer USB cable is the LED lights up red for about 10 seconds, then nothing.
I can't find this behavior listed anywhere on any site, and of course my complimentary BB support has expired. Help me out before I bring this brick back to the store.

Actually, the web page you need is here: http://us.blackberry.com/support/playbook-support/contact.jsp
I called, and apparently, the 90 commplentary support starts when you register your PlayBook, because I was able to get a support ticket from the friendly voice on the other end.
Also, I gathered that Blackberry would handle any warranty returns themselves (though you'd probably need a proof of purchase/reciept).
I had to run to a meeting, so I'll have to call back. Problem not solved yet, but progress.

BlackBerry Curve 9380 will not power ON and the red LED light is flashing

I need you guy's help. I was charging my BlackBerry Curve 9380 this morning. When I was about to use it the found out that the screen will not light up but the red led indicator is blinking one long blink, one ong blink then a full stop. I have already tried removing the battery and sim card for sometime but to no avail. What should I do?!

You need to consider updating/reinstalling device OS. Check the below knowledge base article -
KB03621 How to clean reload BlackBerry Device software and applications using BlackBerry Desktop Software
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

PM8M-V no beep no boot Solid Red LED

I've had the PC I've been using for about 2.5 years, no problems.
Last week a lightning storm killed all the AGP/PCI functionality of my old motherboard. At first, I thought it killed my AGP video card because the internal video to the old motherboard worked fine. This is where I decided to buy an MSI PM8M-V from CompUSA.
Tried installing the board today. I literally just powered down the PC with the OLD Board in it and it all was working fine. The two motherboards seem to be similar in quality and both have internal sound and video.
With the new motherboard hooked up when I press Power the CPU fan comes on, and the LEDS on the front of the tower come on. The RED LED [Which I believe is the HDD LED, will have to double check] comes on and stays lit. After about 20 seconds or so the system powers down. I get no beeps or anything. I doubt any of the components are bad because they were all just working 1 hour ago.
Does this point to a specific problem? I don't think the CPU is overheated as I have thermal paste the Heatsink fits snug.
Suggestions?

Ok, an update.
I have an Antec PSU 300W that appears to be working well.
At the moment I have 1gig of unknown brand DDR memory
I have a P4 Prescott 3.0GHz [I don't recall any of the other details as this PC is several years old]
All hardware pulled from a perfectly working system with the exception of an AGP slot on the old motherboard.
The old motherboard has nearly the exact same features and appears to be of very comparable quality.
I hooked the old motherboard up with the processor, memory, and same PSU and it booted to the BIOS just fine.
This new MSI motherboard WILL NOT boot to the BIOS with the exact same equipment installed. I have double and triple checked.
Is there anything else I should do before contacting CompUSA for a return. I've seen some recommendations about jumping pins to clear the CMOS or something.

Flashing red LED - 800w won't charge or turn on

Love my new 800w especially in comparison to my old 700wx that never worked quite right. Loved it even more after I figured out how to turn off the GPS and extend battery life. Figured that doing a few full charge-full drain cycles would help battery life in the future and reduce memory effect, so ran through 2 cycles fine and on my third...disaster.
Battery drained to 0. Device autopowered off. Got back to my AC charger, plugged it in, LED went red, figured it was charging. An hour later, turned it on, got the booting up message, got to the main screen where it showed a zero battery with AC plugged in...and now it's dead.
I now see a solid red LCD when plugged in for about 10-30 seconds, then it turns off for about 1/2 second, rinse, repeat. Will not start up, period - battery or no battery. Have tried soft resets (removing battery) numerous times, tried hard reset, but hard to do a hard reset if there's no way to turn this on.
Any suggestions? Should I buy a new battery? Is the old one covered under warranty?
Post relates to: Treo 800w (Sprint)

I had the exact same problem after the phone went completely dead and I tried to revive it by charging it with my car charger. (I read that when the phone is completely dead, it is recommended that you use the wall charger) It would not give me a red light indicator most of the time showing that it was charging. When I got home, I tried using the AC adaptor and I had the flashing red light. The phone would power on by itself after about 10 minutes of being plugged in. The phone would boot up and give me about 20 seconds to mess around before it would go dead again. At that point, the red light would not come on at all despite being plugged in and I would have to pull the battery and start from scratch. What I did notice that no matter how many times I did this, the battery would have 0% when the cell phone would actually boot up.
What I ended up doing was a hard reset, but the only way I was able to hard reset the phone was to hold down the red button for a few minutes after plugging in the phone... so when the phone decided it wanted to startup I had the button pushed down. It then asked me if I wanted to erase the data, I said yes, and the phone started working properly again.
Post relates to: Treo 800w (Sprint)

HT1688 What should I do after my iphone 4s' LED light won't turn off and the camera shutter won't open after it was dropped in salt seawater?

How can I TURN OFF the LED light and TURN ON my camera shutter on my iphone 4s after it was accidentally submerged in seawater?

Welcome to Apple Communities
Water damaged the device, and you can't solve it. Take it to an Apple Store

HELP! BB Pearl 8130. Solid Red Led Light. Won't go away.. HELP!

Similar Messages

Maybe you are looking for