Help!!! bdoc is still running but the result on crm is ok!!!
hi all,
i made a m-bdoc to transfer a record from BUT000 R/3 to BUT000 CRM;
i found the new record on BUT000CRM, and the transaction SMW01 says that the process is ok,
but on the transaction R3AM1 i read that the bdoc is still running...from yesterday....
can anybody help me??
(excuse for my bad english....)
Message was edited by:
simba simba
simba simba
Hello,
please check transactions SMQ1 and SMQ2 on CRM side and SMQ1 on R/3 side. Maybe you'll find there some hanging BDOCs.
Regards
Marek
Similar Messages
-
M-bdoc is still running but is ok!!!!
hi all,
i made a m-bdoc to transfer a record from BUT000 R/3 to BUT000 CRM;
i found the new record on BUT000CRM, and the transaction SMW01 says that the process is ok,
but on the transaction R3AM1 i read that the bdoc is still running...from yesterday....
can anybody help me??
(excuse for my bad english....)
Message was edited by:
simba simba
simba simbaWhat you need is not a delta load, but only a complete re-load of the whole customer data of which the adress is an important part of it. You might want to have a look at the request functionality which downloads BP data (adress / adrc table included) and other objects as you configure it. It can be found right next to the definition and download of standard (initial or synchronizing) downloads.
Regards, Kai -
Firefox is running when my laptop comes out of system standby, but the page that was displaying when the laptop went into sleep mode is now a white canvas that does not refresh.
The application is not hung, because I get prompted to save tabs when I quit, but for some reason, I can't prompt Firefox into refreshing the screen.
I'm running Firefox on a Thinkpad T400 which has Intel 4 series Express integrated Graphics.This also happened if the network adapter is disabled then enabled. My computer is Windows 7 x64. Firefox needs to be killed from taskman before it will load a new instance of the application. I can also reproduce with all add-ons disabled.
-
I had my Imac27' for about 1 year (I bought it january 2011) , and it worked fine. But two days ago a problem started. The screen is turning black suddently, and it stay like that until I reboot it. It's not cool. The first time it happen it was hafter a very long days of video editing, I tought it was to hot. But now I just started up the Imac and 10 minutes later it happen. And now I transfer my desktop on my second screen, because the one of my Imac is constantly shutting of. What is this? Can I do something about that?
I´ve came across with the same problem and when I look out for solutions I found out that basically I had Three options
1.- Dim the brightness to the first 2 dots (that is the limit for me, anything above that shuts down again my screen)
2.- Replace an expensive part of the screen (about $900)
3.- Try with an external monitor to see if the problem was the screen or something else
What I did was to plug my flat screen to my mac with a Mini Display Port to VGA Adapter
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter?fnode =51
And… Problem Solved! now Im going to buy a Monitor that gonna cost me less than half of the replacement parts, my main monitor will keep siting down if i dim it above the 2 dots but at least I will have the other to work properly
So that´s that, I hope someone finds this helpful
P.S. Sorry if my english it´s not that good -
My iMac 27inch screen keeps going black but everything is still running in the background? please help. I have read that apple are recalling 27inch iMacs....
Hello @DesCherryBomb,
I understand that you are having issues with your HP 2310m monitor going blank and/or flickering. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt 2 KB
read_array.vi 21 KBThe problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does. -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!
Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this. -
i have been requested the certificate for IOS Development since 4 days ago, but the result is still pending approval. So how many days should i wait?
1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now? -
Run status is still "processing" but the distribution status is "posted"
Hi all,
We have run a process yesterday.
The process' run status is still "processing" but the distribution status is changed to "posted". what could be the reason for this? i have never seen such thing in process monitor.
Please help me.
Thank you,
Bye.And does the report posted and accessible from the monitor ?
Peopletools version ? OS ? Database ?
Did you try to refresh the page (not through the refresh button but with your web browser) ?
Did you try to disconnect and reconnect ?
Nicolas. -
I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?
It's very simple. If you want to use iPhoto, just let it manage things as it does. Other than that: Export from iPhoto and delete the image from iPhoto. That will remove the master and all versions.
If space is an issue... use an external disk.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Regards
TD -
I often use my iPhone to take video but the result is NTSC and I use PAL, how I can change? Can somebody help me? Thanks
My problem is when I transfer the movie on Final Cut for the assembly of the film, I know that I can convert with MPEG Streamclip but I would like to take my film directly on PAL. Is that possible? In the previous message I wasn't clear, I hope now I explained myself better. Thanks for help
-
Operation cancelled on SQL Developer still running on the DB
Using either the SQL Developer 2.1.1.64.39 or .64.45 versions when a DML statement (e.g. SELECT, DELETE, etc.) is executed and few seconds after cancelled before it finishs, the SQL Dev IDE shows as the operationwas cancelled, but it still running at the database level.
If you try to close the SQL Developer to cancell the operation, you will get a "Connection is currenly busy. Try again?", but you can only chose Abort and wait.
Regards,
ASChSQL Developer is certainly not just cancelling statements in the user interface - I can cancel a query that normally takes two minutes to run after five seconds and then immediately run a different query in the same connection and get the results (ie the cancelled query is no longer running in the database).
You are probably seeing the difference between the UI no longer waiting for the statement to complete and the statement actually completing in the database. Especially with DML the database needs to clean up from the cancelled statement, rolling back changes already made by the statement before it was cancelled. Even selects can allocate temporary space for sorting which would need to be cleaned up on cancelling the select.
I would not expect closing SQL Developer to do anything more to cancel the statement in the database than it has already done - SQL Developer has already told the database to cancel the statement and it is just taking some time for the database clean up after the cancelled statement.
theFurryOne -
External Simpledrive is still running but not working?
I hear and feel that the harddrive is still running, but I can't access the harddrive or anything on it. I need to know how to work it again without uninstalling it because it has a ton of stuff I need on it!
Have you tried accessing the device? On your windows screen, press start -> run. From here, type in the drive (d:// or e://). If the drive is still installed correctly, the next screen should display your drive and its contents. I hope this helps!
Nothing I post is an official statment of Best Buy or Geek Squad, it is only a helpful opinion! -
regarding the article: iTunes Store: Troubleshooting iTunes Match: in my mac iTunes, i don't have a menu option 'view > view options'. i do have 'view > show view options'. but the resulting popup is different. is this article out of date?
i am troubleshooting iTunes match because it has been days since i uploaded music to mac iTunes and it still has the iCloud status icon for 'waiting'.Is there really nobody else with this problem? Really?
Maybe you are looking for
-
Can I return my iPhone 6 and go back to my 5?
Hi folks, I mail-ordered an iPhone 6 because my current phone's a 5, and I've been doing the every-other-generation dance since my first iPhone, a 3G. For the very first time, though, I think I regret my upgrade. I'm probably going to allow a few day
-
I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". Wha am I doing wrong??
-
Is there any better option than this slow query?
Hi all, i want to find out lets say Ticekt no range from Variable1 - Variable 2, are all ready existed or missing from my ticket master table which is having a million records and the no grows timely. For example i want to find out in range 30000 - 5
-
How to change the langage pack in the N958GB ?
How to change the langage pack in the N958GB ? I bought this N95 8GB in greece and it has only greek/english How to put french/english ?
-
Pdfs are not reading correctly
I use indesign and illustrator CS6 and when I write a pdf my client says its showing up as funky black and white and not color. Is there something wrong with my software?