Help before i throw my apple products out the window I cant download i tunes on my laptop

I get a error message after is says successful download it says apple application support not found windows error 2
also need some help with syncing my I pad music to my old computers i tunes. when I try to sync it wants to delete the music on my ipad.

I'm getting the same problem. Probably since 10.4.10 but I can't be sure. I am have just been perplexed at why my other machines are working OK and my iMac G4 17" 1Ghz is having network problems. It has the original Aiport Extreme Card inside. I was Googling and saw a suggestion to delete all your "Network Locations" then start fresh. I've just tried that and I'm running a ping for a while to see how its performing. I think its improved but the signal read only 2 bars still when my MacBook Pro right next to it read 100%.
Somebody must know something?

Similar Messages

HELP BEFORE I THROW MY MAC BOOK OUT THE WINDOW!!!!!

HELP!!!!! ok i have a mac book and recently purchased an iphone the software update for the iphone crashed my macbook and my iphone and the macbook had to be wiped and my HD had to be wiped, now all this was ok cause i had my music and my photos on my iphone BUT the iphone when it eventually turned on is now saying it had to be restored to factory setting which means i loose everything!!!!! how do i save my iphone from being wiped???? if i loose everything im going to throw it away i cant understand why the stupid phone needs to be restored and the iphone screen is just showing a pic of plugging the phone into itunes!!!

which instructions are those? do you mean this [link|http://support.apple.com/kb/TS1545?viewlocale=en_US]? if that didn't do it I think you are in for an [archive and install|http://support.apple.com/kb/HT1710?viewlocale=en_US].
and of course you can always go with the option of throwing the computer out of the window...

HELP....Almost threw imac out the window....Htlm files...iweb gone.

OK, here is the scoop. This awesome imac took a nose dive and crashed. And I lost my iweb project that I worked soooooo hard on. I opened up iweb and nothing, it was gone. Two weeks 9 hours a day out the window. I came close to throwing this awesome imac out the window. So, I went into idisk and
found the file or files. It seems there are 12 little file with the page name and letters (Html.) I found out all these files made up the one project I was working on in iweb. How in the world do I get these (Html) files back into iweb so I can continue to work on it? Please help ASAP.....Thanks ...Rich

How in the world do I get these (Html) files back into iweb so I can continue to work on it?
You can't. Unless you have a backup copy of the Domain file which created the site, you will need to recreate it.
http://homepage.mac.com/thgewecke/iwebdata.html
Hopefully with all that effort invested you have been making backups of your User files?

PLEASE help before I throw my iMac G4 out of the apartment window

Hello Apple Experts.
I hope that you can help me out here before I throw my iMac G4 out of the apartment window!!!!
I am having major problems with my wireless connection on my iMac G4(Uses original Airport Card).
When I installed 10.4 the connection was just very weak and not all the bars on the Airport icon were highlighted.
Also, on occasions the connection was totally lost and the iMac didn't even see the base unit (non apple) whilst it was switched on.
Now that I upgraded to 10.4.10 (using the PPC combi update), the Imac does not see or connect to the base unit at all.
As far as I know the card and antenna is conneted properly as I followed the Apple set up guide.
I know that the base station is fine as I have another mac in the house that connects with no issues....
I am wondering if there is a general issues with the iMac G4's connecting wirelessly with the Airport Card.
It seems there maybe three problems here.
1) There is an issues with the software update
2) There is a problem with the Airport Card (although it is brand new)
3) I need to configure someting to make it work!
Hope someone can help me here.
Thanks for your time.
Optimistique1

I'm getting the same problem. Probably since 10.4.10 but I can't be sure. I am have just been perplexed at why my other machines are working OK and my iMac G4 17" 1Ghz is having network problems. It has the original Aiport Extreme Card inside. I was Googling and saw a suggestion to delete all your "Network Locations" then start fresh. I've just tried that and I'm running a ping for a while to see how its performing. I think its improved but the signal read only 2 bars still when my MacBook Pro right next to it read 100%.
Somebody must know something?

I'm ready to throw my macbook pro out the window

Hey everyone, i'm a sorta-newbie i've owned apple products (ipods and iphones for years, but this is my first computer from mac, and my first personal computer other than my parents')
So i recently bought my very first mac...the mbp 5.3 all nice and pretty with ilife 09 and what not. So since i've deployed, i figured i'd start to actually use some of these programs...namely, iweb...with the intentions of learning more and more about it and pulling in other apps. Well i actually have several questions, but i'll ask them in the order in which i usually encounter them. The first being, that whenever i close and then reopen (or "publish", i'll talk about that one a little more, later)...the pictures i was so clearly told i could simply drag into place from the media bar always move and cover chunks of texts...it gets extremely annoying to have to readjust the photos every time i open iweb. Is there any way to keep one's photos from moving.
Secondly, after manually readjusting the pics, i then try to publish the site...the first time i did it, i was told there was an error publishing the site, but i was able to visit my page. Although i wish i didn't because, just as when i open iweb, there the pictures were covering large amounts of texts. So i go back to iweb and look at the site, everything is in place. I click save and try uploading it again and for some reason the text all disappears from only the actual blog (welcome page and all is ok)...then try uploading again, but the option is greyed out along with visit site.
I'd greatly appreciate any help you all have, i'm new to macs and not extremely computer literate so if you could break things down for me, i'd appreciate it...
oh, a few things that may help...i upgraded my me account so space shouldn't be an issue...and i'm not sure if anyone can visit the page but my site's name is rcbray...and its uploaded through iweb (no outside sources)...
thank you all for your help...i just wish i had run a test on this earlier, my plans were to have the site up an hour ago...

ugh...i'll be sure to let you know...i'm beginning to regret buyin a mac now...one usually spends the bucks most of have dropped for a premium machine, to actually work. I don't expect every aspect to be perfect, but simple things such as functionality of applications developed for and by the same company making the machines should work...maybe its just because i'm more than a little peeved that i'm going through such trouble to do something as simple as put two pictures next to each other and upload the site (as it appears in iweb) on to the mobileme...
I finally got it to upload, thanks Old Toad, and i got the pictures to upload...now they just don't appear next to each other as they do in iweb...i guess the good thing is that they are no longer covering text...
now i'm presented with a second problem...i add a second entry to my blog and when i click on that directly i'm taken to a page saying it is not found...but when i go to the first entry and click next it takes me to the second entry page...although that page is ALMOST correct (the links do not have the same styling i applied to them in iweb)...
and now i'm presented with a third problem...after adding the second entry i noticed on the blog listing page that my photo from the first entry did not move with it (another photo covering text problem)...so i tried using the graphic placeholder, but the image still does not show up on the main page...

I'm really so frustrated with videos lagging, I'm about to throw my Macbook Pro out the window. It's really becoming that bad. I've reinstalled Flash, I've tried emptying the trash in safe mode, everything. And my connection on the internet video blows.

It's worse than dialup, videos constantly freeze up and lagg for minutes. It takes me nearly a half hour to see a 4-minute video. I've heard that it can also be a quicktime addon that I can see, but cannot delete. Sorry, but I'm so ******* frustrated. I don't have a lot of money and when I bought this, I just wanted it to run right. It's been a tough year on me and this hasn't helped.
I have a
macbook pro 15", Mid 2012
8 GB
Software is mac osx lion 10.7.5
If anyone can help me fix this problem, you'd be my ******* hero. I'm not very tech savy... but I'd appreciate any help on this.

Sounds like you have a corrupt cache file
Unistall Flash, run the #12/#13 Step here, then reinstall Flash
How to install/uninstall Flash, fix problems
Step by Step to fix your Mac

My ipad says your Apple ID has been disabled. Ready to throw this out the window. Apple store could not help. The instructions on the web are useless. Anyone found the solution?

My ipad says your Apple ID has been disabled. Ready to throw this out the window. Apple store could not help. The instructions on the web are useless. Anyone found the solution?

Sorry, does this link work
http://www.apple.com/support/appleid/
I ended up having them call me then was able to give them 1 of my secret questions right and they reset things so I could reset all my secret questions.
Try going into contact support and see if you can schedule a call. There seems to be some issues with peoples' id's and this update. iTunes thought that I'd never bought anything from my computer or device before, and I clearly had, so it's like it got confused. THen I tried to get my questions reset, but the mail never came, which is why I just got a phone call because I felt it was 'real person' time.

Getting error code 1611 when trying to restore my Ipod. I have tried a forced restore and disabling my computer security and still nothing...ready to throw it out the window at this stage...help!!

Getting error code 1611 when trying to restore my Ipod. I have tried a forced restore and disabling my computer security and still nothing...ready to throw it out the window at this stage...help!!

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
If you also unsuccessful on another computer then time for an appointment at the Genius Bar of an Apple store. It would see that your iPod needs service as specified in the article.

I have been trying to download the newest itunes to my windows 7 computer wit the last 2 wks now... im at the stage where iv tried everting from uninstalling itunes to installing it again... can someone please help be4 i throw the computer out the window!

i have been trying to download the newest itunes to my windows 7 computer wit the last 2 wks now... im at the stage where iv tried everting from uninstalling itunes to installing it again... can someone please help before i throw the computer out the window!

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Please help - about to throw heavy 8 core out window

I had been using FCP 5 on my iMac for nearly 2 years. I have exported via Quicktime conversion, and straight to Compressor with no real problems with speed.
I have a large encoding job to get done, so i upgraded and got Dual Quad 2.8 with 4 gb of RAM. I also upgraded to FCP Studio 6.
Encoding times for H.264 are taking longer than on my iMac by a long time. A 15 second test file running through single pass H.264 encode is taking 4 minutes. It took 45 seconds on my iMac!
I've tried setting up the cluster using 4 instances, I've tried using "this computer only". I've tried with and without frame controls for interlacing. I've tried creating reference movies and importing into compressor. I've tried exporting straight from FCP. I've tried un and re-installing the software.
I'm dying here. Have spent a ton of cake and feel like throwing this thing out the window. I've googled until my fingers turned blue looking for suggestions. I'm in serious need of help.
Please, oh Mac FCP gurus, lay your knowledge down on me! I can provide specific settings and specs as needed!
Please!
Mike

Did you try the exact same media file when comparing your iMac against your Mac Pro? Keep in mind that different media is handled differently.
If you are using any frame controls for your H.264 multi-pass transcodings in Compressor, have a look at this post: http://discussions.apple.com/message.jspa?messageID=7309534#7309534
As Brian Gary mentiones in that MacBreak video, maxing out your instances in Qmaster is not necessarily the best thing to do when trying to make use of a virtual cluster.

HELP! I am about th throw this iPhone out the window!

I have had to restore my iPhone TWICE now with tech support guidence. I've has nothing but TROUBLE since both the 3.0 AND the iTunes update, and am BEYOND frustrated!!! I won't even go into all of what else went wrong previously, but now my photos will NOT show up in iTunes to sync on to phone. I have troubleshooted by reading on here...I've tried everything. Before all this trouble I had done it so I know it's not just me. The folders show, but they say 0 pictures.
Again I'm SO SO SO frustrated. A phone I LOVED and was thrilled with has been nothing but pure frustration since the 17th. Everything I do on it is nothing but a hassle and 2 hours of MY minutes with Apple techs!!! I ahve to admit I am in tears right now.
I hope I get some replies (!!!!) and thanks in advance... why will my photos not show up? Just empty folders???

OMG OMG I am so embarrassed....they DID go to the folder as PPSP files. I'm so sorry! Thank you though for taking your time on me. I will go change them all and see if that works. If not I promise i'll come back here before tossing the phone out the window Again I'm sorry...but hey, if it weren't for you I never would have checked. I don't know why it saved them like that!

Installed itunes, checked in, I try to download free applications out the window: this Apple ID has not yet been used with the iTunes Store. But the mail I receive, that I'm registered, and I have an Apple ID, please help find out!

installed itunes, checked in, I try to download free applications out the window: this Apple ID has not yet been used with the iTunes Store. But the mail I receive, that I'm registered, and I have an Apple ID, please help find out!

Diana,
This could be a delay while internal service records were updated. Check it out again - is it okay for now?

Ready to throw the printer out the window!!!!!!!

So i've been trying to update my portfolio and im ready to throw this printer out the window and probably never buy another HP product if someone cant help me fix this problem. Everytime i go to print whether its landscape or potrait it cuts the top of my photo off. This is a new problem, its never happened before up until now. I have spent days trying everything, ive tried printing it off my Samsung galaxy tab S. My desktop. i have tried resetting the printer, updated the software, troubleshooting, aligning, everything and have gone through $100 worth of ink to get nothing out of it. I am very angry with this product. what the hell is wrong with **bleep** thing?????? havent even owned it for a year!!!!!!

Hello, In the printing App that you are using, there should be an setting option to select the Paper Type and Size. Make sure you got that settings changed to the type and size of paper you are wanting to print on. I am not sure if you are using the inbuilt app of Samsung to print or HP's ePrint & All in One Remote app . ? HP ePrint app is used for printing using.HP All in One Remote app is used for Scanning . Click HERE to access more info on this Apps.

STILL can't get Videos into 5G iPod , Ready to throw it out the window

I'm ready to throw this iPod out the window , I spent all day yesterday over 10 hours , trying to get videos onto my iPod , my iPod software and iTunes are up tp date , first I just drag and dropped them as MPEG no luck iTunes recognized and played them but wouldn't let me drag and drop them to the iPod then I used iSquint , it converted them to MPEG 4 , they transferd into iTunes and played but not the iPod I got an error that they weren't transferable and not recognized by the iPod .
I called Appe this morning and they were no help since I didn't get the Vid's from the appple store and since you only get one free service call ,and wouldn't tell me the format for the videos I didn't want to waste it . They suggested I buy Quicktime Pro .
Then I tried , Movies For My iPod . I used the transfer for iPod option , it converted them to .mp4.m4v . I drag and dropped them directly to the iPod no luck , they're there but wont play or show up in the iPod then I opened up iTunes and drag and droppped them into iTunes again played in iTunes not transfered to the iPod although it said it was updating .
Then ,I tried the custom settings file format MP4 , video format , MPEG-4 Improved , Image Size 320 X 240 QVGA , again I tried to drag and drop them onto the iPod still not there , now I tried to drag and drop unto iTunes , again they're there and play but won't show up on the iPod . I've pretty much had it .
In the Movies For MY iPod they're are some custom settings . File Format MP4(ISMA) In the Video there is an MPEG-4 Improved setting with a bit rate of 256 kbits/sec Image size 320x 240 QVGA frame rate 30 plus alot of other settings which I have no idea what they are .
Today I have 6 hours of frustration into this still no luck . I'm really disappointed with Apple ,I started out with the first iMac a Bondi Blue and have been working my way up , I have an iBook , an iMac Graphite , a G4 iMac a 15G 3G iPod now the 5G iPod . Apple should have included Quick Time pro in the G5 , and only one support call, come on , even Dell gives you a year of support .
And to top it all off the Black is beautiful but scratches easily , I'm a chef , my nails very short and allready it's scratched to bits by the wheel, I keep it in a case when I'm playing it , you can hardly touch it . I'm not very happy with Apple and this iPod , they rushed it out for the holiday , so if your in the jacksonville Florida area look for a flying iPod .

Lets run down a list of possibilities:
1) You are using iTunes 6 here, correct?
2) You did not say whether or not you are running in auto-sync, manual management, or "Enable Disk" mode. If you left it in the default mode as installed (auto-sync), then after dropping your movies into iTunes (or adding them to the Library), simply connect your iPod and allow it to auto-sync (mirror) the current contents of iTunes. (You can also try "Update iPod" option under the File menu, but I have found it unreliable -- possibly owing to "sleeping" iPod.)
3) Not sure if your reference to "dropping the movie on the iPod" is a reference to the iPod desk icon in manua/disk enabled mode or the iPod "Source" reference/associaed contents list in iTunes. Could you clarify where you are attempting to "drag 'n drop" and/or the selected sync mode of operation in your iPod Preferences.
4) As to conversion to iPod compatible formats, recommend you stick with MoviesForMyPod and/or iSquint if you are restricted to QT Pro 6 and not sure what settings to use for MPEG4 preset collection/QuickTime Movie full manual mode.

Phone locked up- and I am ready to throw it out the window

Last night before going to bed, I plugged my phone in to charge. (Using the IPhone charger and plugged into the wall). My phone is currently showing the battery, yesterday's date and the time of 9:22pm. I can't get the phone to do anything. I just held down the on/off button for 5 minutes but I can't get it to turn off.
This is the second phone that I have had that has this issue (returned the first one and it was sent in to Apple. I got a letter back that they could not fix it and they sent a new phone).
Any suggestions??

Any suggestions??
Yes - don't throw it out the window.
If you are unable to perform a Reset by pressing and holding the Home key and Sleep/Wake key simultaneously until seeing the white Apple logo and then release which forces a system restart or this doesn't work and if so, you are also unable to perform a complete Restore, call AppleCare - (800) 694-7466.

Help before i throw my apple products out the window I cant download i tunes on my laptop

Similar Messages

Maybe you are looking for