Help before I throw this into the wall.

I just received a ipod for my birthday. I have installed software and have loaded music and some podcasts to itunes successfully. However, when I plug in my ipod it opens up itunes but doesn't send the songs to my ipod.
My ipod is empty. help!
  Other OS  

Welcome to Apple Discussions!
Your songs in the iTunes library won't automatically update to your iPod unless you have the correct option set.
Go to "Preferences -> iPod". What setting are you on?
If you are on one of the "automatic" settings (sounds like you aren't though), when you plug in your iPod, iTunes will start automatically update your iPod with the iTunes libary ("ALL") or to a particular folder or playlist in iTunes ("SELECTED").
If you are set for "manual", then to transsfer songs to your iPod, you'll need to go the iTuens library, select the songs you want onto your iPod, and drag-and-drop then into your iPod (which is in the left source panel of iTunes).
I hope this works for you!
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Similar Messages

  • Help before I throw this printer out of the window!!!!!!!!!!!!!!!!!

    I have just purchased a Deskjet 2540 all in one printer - I will only ever need to print boarding passes etc. -
    this looked so good on Amazon ideal for my iPad and said how easy to set up!!! In my dreams - I have now spent 10 hours
    Trying to set this up and last night was close to cracking:-
    I am setting this by wirless. I have the password and the printer showing on my iPad.
    Each time I try and load the softwear I am told an unexpected error has occurred please try again later - I
    Have tried and tried to no avail. Apple staff have said I do not need this softwear????????
    The network test results say:-
    1 check the printer network name ssid matches your wireless router network name ssid exactly!!!!!
    2 if they do not match exactly, run the wireless setup from the printer software to configure your hp printer!!!!!
    But no where can I find how to do this and sorry I really do not understand what this means.
    Reading Amazon some people have set up in 15 min!!!!
    The cost of bringing in an expert to set this up is worth more than the printer cost!!!!!!
    Thanks for reading feel better letting of steam will defiantly be a 0 from me for the feed back to Amazon

    Hello SueJon,
    Welcome to the HP Support Forums!
    I hope this reply finds you with the printer not thrown out of the Window. Regarding the Deskjet 2540 setup to work with the iPad, I would like to help.
    There are two ways that you can print from the iPad to the 2540. The first, Wireless Direct. Wireless Direct is a network that the printer broadcasts and the iPad would connect to it. This method will leave the iPad with no other network access while connected.
    Second, and more functional, is having the printer connected to the same network that the iPad is connected too.
    In order to setup this connection, follow the steps outlined below;
    Turn Wireless Direct on from the front panel button on the printer. (number 4).
    Connect the iPad to the printer network, Settings> Network> HP-Print-2540.
    Open Safari and type this I.P address into the address bar, 192.168.223.1 and hit Enter.
    Go to Network or Wireless and then Wireless Setup Wizard.
    Select your network and enter the needed information.
    Once connected, the Wireless light should be solid, connect the iPad back to your network. To print, open a document, hit the Share button (), and if an option to print is available you will be able to select the print option.
    I hope you find this information helpful.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HELP WITH IPOD BEFORE I THROW IT UP THE WALL

    HI I HAD A IPOD ON XMAS DAY ITS THE ONE THAT U CAN PLAY VIDEOS ON WELL ILL TELL U WHATS HAPPENING I READ THROUGH THE LEAFLET AND INSTALLED DISK ON MY COMPUTER AND EVERYTHING I HAD ON ITUNES WAS DOWNLOADED TO IPOD IN SECONDS THEN I UNPLUGGED IT HTEN I BROUGHT MORE MUSIC OF ITUNES BUT CANT DOWNLOAD TO IPOD THERE IS NO IPOD SIMBOL IN ITUNES IV FOLLOWED MANY STEPS BUT NOTHING ALSO IV UPDATED AND CLICKED IPOD UPDATER WHERE U CHOOSE UPDATE OR RESTORE BUT IM GETTING MESSAGE PLUG IN IPOD TO UPDATE BUT MY IPODS PLUGED IN WHAT THE **** IS GOING ON IM GETING DO NOT DISCONNECT SIGN ON IPOD

    There are troubleshooting steps here.
    PC does not recognize the iPod. Very often, just a simple reset cures the recognition problem. Try it several times, it doesn't always work straight away.
    Then there's this.
    iTunes doesn't recognize your ipod.
    Now, could I ask you a favour please? Don't post in capital letters. Here on the forums it's considered shouting and rude. That, coupled with lack of punctuation in your post, makes it difficult to read. Also, it's best not to swear in your posts. That just attracts the attention of the Moderators who will remove your post, and that's not going to help you at all.
    Many thanks.

  • My iPod is annoying me. Can someone help before I throw it out the window?

    Here's what's happening:
    1)I was having some trouble with my iPod and I restored it with the newest iPod Updater. Then uploaded my songs. The only songs that worked were the ones I imported from CD's.
    2) Then I downloaded the newest iTunes and and updated my iPod again. Only a few songs didn't work this time.
    3) But now whenever I plug in the iPod to update it, it says I have to restore then update it. I must have done this 2 or 3 times by now. How do I stop this from happening?

    Here's what's happening:
    1)I was having some trouble with my iPod and I
    restored it with the newest iPod Updater. Then
    uploaded my songs. The only songs that worked were
    the ones I imported from CD's.
    2) Then I downloaded the newest iTunes and and
    updated my iPod again. Only a few songs didn't work
    this time.
    3) But now whenever I plug in the iPod to update it,
    it says I have to restore then update it. I must have
    done this 2 or 3 times by now. How do I stop this
    from happening?
    Now my click wheel's acting weird.
    Windows XP

  • Can anyone help before i throw iphone out the window.....

    My iphone wont slide open...ive tried to reboot it no avail..restored factory setting still wont open...also on front screen in square box is message saying waiting for activation may take some time...Anyone got any ideas...Thanks.

    Hi, it is the original 1st gen 8g phone...os ive never touched it so i presume its what was on it, sorry not very good with these things..its not been jailbroken...slide to unlock is visable just wont slide across and message is on front screen...when i restored it i put latest version of itunes on it..Thanks for trying to help..

  • I have an Ipod 4th gen. and when you plug it into the wall it is stuck on the charge/lighting bolt screen and it wont charge, and when you plug it into a computer (PC) the lighting screen wont even apear. Please help I have had this problem for forever.

    I have a ipod touch 4th gen and it wont chrage. When you plug it into the wall the lightniing bolt screen will apear but no matter how long you leave it, it will never turn on. Also it the lightning bolt screen wont even come on when you plug it into a computer (PC)..........PLease help its been like this for forever

    Hi Gammer576775!
    Here is an article that will help you troubleshoot this issue with your iPod touch:
    iPod touch: Hardware troubleshooting
    http://support.apple.com/kb/ts2771
    Will not power on, or will not turn on unless connected to power
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Connect the iPod touch to an Apple USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if the display turns on and…
    The home screen appears, the device should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen: . Then disconnect the device from power. If it immediately turns off, seek service.
    The low-battery image appears even after the iPod touch has charged for at least 20 minutes: See the "iPod touch displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or low-battery image appears , continue with this article for further troubleshooting steps.
    If the iPod touch did not turn on, reset it while connected to an Apple USB power adapter. If the display turns on, go to step 4.If the display remains black, go to the next step.
    Restore the device. Connect it to a computer and open iTunes. If iTunes recognizes it and indicates that it is in recovery mode, attempt to restore the iPod touch. If the device doesn't appear in iTunes or if you have difficulties in restoring it, see this article for further assistance.
    If restoring the iPod touch resolved the issue, go to step 4. If restoring it did not solve the issue, seek service.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • My iphone 4 turned off yesterday very randomly. I had 88% battery when it turned off. I plugged it into the wall and it said i had no battery, then the apple came up as if it was turning on. It went black again and this keeps repeating. Any help please ?

    My iphone 4 turned off yesterday very randomly. I had 88% battery when it turned off. I plugged it into the wall and it said i had no battery, then the apple came up as if it was turning on. It went black again and this keeps repeating over and over. Any help please ?

    Battery could be at EOL. Try getting it replaced.

  • My ipod touch 4 won't sync or register on my computer. The cord works, the usb port works, and when I plug my ipod into the wall to charge it work, but when i plug it to the computer nothing, not even charging. P.S. worked before I updated it.

    The cord works, theusb port works, and when I plug my ipod into the wall charger it works, but when I plug it into the computer, nothing, not even charging. P.S. it worked before I updated it to iOS  6.1.5

    You do have iTunes 10.7 or later on the computer, right?
    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • My ipad says your Apple ID has been disabled. Ready to throw this out the window. Apple store could not help. The instructions on the web are useless. Anyone found the solution?

    My ipad says your Apple ID has been disabled. Ready to throw this out the window. Apple store could not help. The instructions on the web are useless. Anyone found the solution?

    Sorry, does this link work
    http://www.apple.com/support/appleid/
    I ended up having them call me then was able to give them 1 of my secret questions right and they reset things so I could reset all my secret questions.
    Try going into contact support and see if you can schedule a call. There seems to be some issues with peoples' id's and this update. iTunes thought that I'd never bought anything from my computer or device before, and I clearly had, so it's like it got confused. THen I tried to get my questions reset, but the mail never came, which is why I just got a phone call because I felt it was 'real person' time.

  • My IPhone shut off by itself and I can't turn it back on. My lock screen button is broken and I tried plugging it into the wall but nothing happened. Can you guys please help me.

    My IPhone shut off by itself and I can't turn it back on. My lock screen button is broken and I tried plugging it into the wall but nothing happened. Can you guys please help me.

    IIf the battery was completely drained it might take some time before the phone will respond. Wait at least 30 minutes with the phone connected to the charger. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the phone starts up let it continue to charge until it's 100%.
    if the broken button will not let you do the reset Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • My iPod touch is not turning on or nothing. i have done all the things i could think of, other then throwing it at the wall. Please help!!!!!

    I cant get my iPod touch to turn on or do anything. Can you please help i have done all i can think of and i'm about to throw it at the wall.

    Without knowing what you actually tried:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipod wont connect to the computer but will charge when pluged into the wall, how can i fix this?

    i can plug it into the wall adapter and it works fine but when i try to plug my usb ipod charger into my windows to update my I.O.S it doesnt work, what can i do to solve this problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?

    i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

    Charger60 wrote:
    i
    Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?
    No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
    Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

  • MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall. Help!

    MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall.
    There is no water damage or anything. I got that checked at the Apple store. I also have Apple Care + but didnt let them give me a new one yet because I have photos on this that I have no yet backed up that are very important. They are the last photos I have with my grandfather. Can anyone help me. Please!

    If the phone shows the "connect to iTunes" screen, the data on the phone is most likely lost.
    Connecting in recovery mode is your only chance to use the phone again, besides getting it serviced by Apple.
    iOS: Unable to update or restore

  • My iphone wont fully turn off unless plugged into the wall charger! help! it is causing battery drains

    my iphone has been experiencing poor battery life. i have restored it twice now, and nothing seems to be helping. i am wondering if the fact taht the phone wont shut down has something to do with this problem. i cant get it to fully turn off unless it is plugged into the wall! help! i have tried restarting it holding down the hold and home button nothing works.

    Restore as new, does the problem continue?  If so, take it to Apple for evaluation.

Maybe you are looking for

  • How can I change the sender details on emails sent from one of 2 iphones linked to my itunes?

    I have 2 iphones set up on my itunes, one for me and one for my husband, when he sends an email from his iphone it shows as being sent by me not him. His hotmail email is set as the default on settings and it is his emails in the inbox,how can I chan

  • PL/SQL Web Service: Broken Pipe

    We have successfully deployed PL/SQL Web Services on the Oracle Application Server 10g with about 6 containers. The web services are being consumed by a .NET application. All seems to be working well but we continually are having intermittent (every

  • Photo edits in aperture are not being updated in Photostream

    I want to edit photos in iPhoto on an iPad mini and also in Aperture and have the changes synchronised either using photostream or a direct connection. Try as I may I can't get this to happen. If I move a photo in Aperture to the photostream then it

  • Manifest and classpath frustration

    I have a very simple standalone application. It is not an applet - it's a simple command line program that parses an XML stream and stores the results in a database. This app depends on a ton of external jar files. I would like to be able to build an

  • Flex2 and SEO help

    Hi I'm rather new to Flex2 and I had a general question about search engine words like what you'd find within the meta tags of a static HTML page. Seeing is it that the output is a giant .swf file for clients, how does one address the issue of their