HELP!! Blank DVD problems?

I've never had a problem with this, but today when I desperately needed a DVD burned, DVDSP-2 will not take my blank DVD-R's. Cd's will burn, I can burn on to the blank DVD-R's in other programs, and I can even put my project on a DVD-RW. BUT every time I put in a DVD-R and hit Build and Format, or Format, or Burn (I've done it in all the orders) it ejects and tells me to put in a blank disc. Then I'll reinsert the disc and get the same thing. I've restarted and reinstalled DVDSP-2. I have it well below the 4.7 GB on the DVD
And for some strange reason I no longer have QuickTime Pro (would this create a problem).
I'm not the greatest on this program-But I've never had a problem.
Thanks,
Todd

Hi Todd,
I 'm experiencing the same problem as you've described above. Did you find out what went wrong and how to fix it?
Any suggestion will be greatly appreciated.
Ken

Similar Messages

Help :( DVD Drive will not read Blank DVDs but movie and data DVDs ok.

I am at loss what to do. Whenever I put in DVD with media in it (including +R), it plays and reads it all just fine. CD data reads no problem too. However, when I put in a Blank DVD, it chugs and ejects it out completely.
Preferences are fine. It says 'Ask What to Do' is set when 'You insert a Blank DVD'
Here was how it started. Previously, I could put in a blank DVD and it would be just fine but I'm having problems burning after the 10.5.6 update. Read in a post somewhere to try resetting your PRAM which I did and now it won't accept the blank DVDs. Everything else is fine.
I know a lot may say it's a bad batch, but I bought a new batch, Memorex vs. Verbatim and nothing.
Would really appreciate ANY help I can get!
Hardware Overview:
Model Name: MacBook Pro 17"
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version: 1.14f5
Serial Number: W86*
Sudden Motion Sensor:
State: Enabled
MATSHITA DVD-R UJ-85J:
Firmware Revision: FAV1
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: Insert media and refresh to show available burn speeds
< Edited by Host >

Repairing permissions yes. But in my head, if everything is working fine for it, just won't read Blank media, could it be a software thing?
I'll give it a shot in a few hours

Problem getting blank DVDs to show up on desktop or in iTunes

Hello,
I have been trying to burn playlists in itunes onto a blank dvd. I can burn CDs, but when I try to insert a blank DVD, it checks media and spits it back out. Neither will my MAC show the blank dvd on my desktop when I insert it outside of iTunes. I have an internal DVD drive and an external one....same story!!??
The very last time I tried to burn a DVD in iTunes, it started, but then I got some strange message about the spool running out?? I've never seen it before.
My DVD drives are a Yamaha CRW2100E and a Pioneer DVD-RW DVR-1600D
Also, the drive keeps opening and closing...with or without a DVD in it. Again...it works for CDS!!!
I have verified and repaired my preferences. Any ideas as to what could be wrong?
Thanks,
John

Most likely your external DVD burner is causing a problem, disconnect it and reboot.
Try a different brand of media, handle only the edges.
Click a pic to feel the awesome 30" • Clone your boot drive, read my how to post here

HELP! DVD Drive won't read blank discs

Recently, MAC Mini (Power PC) Matsushita UJ-845 Superdrive doesn't recognize blank DVD media (from same 100-pack spindle previously used with no problem). Drive spins, reads and then seems to go into a rhythmic oscillation. After a short time, I get this message:
"The drive reported an error:
Sense Key = ILLEGAL REQUEST
Sense Code = 0x64
ILLEGAL MODE FOR THIS TRACK"
If I keep trying to get the blank disc read, I get another message:
"Interface Error: -16434
The connection is not stable"
Has anyone else experienced this? I've done forum searches on some of the key words and error codes above with no luck.
I get this error when trying to burn a VIDEO_TS file to DVD using Toast 7, but it really seems to be more of a hardware-related issue.
Anyone got any ideas?

xfm,
I too have the exact same error messages, but with a UJ-846 drive and Verbatim DVD-R 100-pack spindles.
My drive reads CD/DVDs OK, no problem, but gives problems when I put in a blank disc. I had this problem a few weeks ago with CDs as well, but then opened up the Mac mini and 'cleaned' the Superdrive with some compressed air, and that seem to have sorted the problem then.
Today though, for some reason NOTHING works, I even left the Mac mini 'naked' (without casing) while trying ten times and blowing air in between each time.
I have two batches of Verbatim DVD-R (100packs) bought in two different stores about a month or so apart, and one batch of CD-Rs that are yet another make. All of them with the same problem.
I think this is a hardware problems and it absolutely stinks that it only happens after the Apple warranty has expired. I've done about a 100+ disks on the Mac mini, which in my mind is hardly any at all, so it can't be 'worn out'.
Any ideas, or anyone with leverage at Apple that can kick some a*s
PS. I also have a MacBook Pro C2D with a busted spindle in the SuperDrive (UJ-857D), so me no like SuperDrives very much.

I need assistance in burning an imovie to a DVD. I've done this before, but am having problems this go around. When I get to the import section and insert the blank dvd it runs a few seconds and ejects it. Any ideas?

I am struggling with getting the imovie I just created to burn onto a DVD. I have done this before, I'm following the tutorial for imovie '09 and it isn't working after several attempts. Any suggestions? When I get to the import phase and insert the blank dvd it runs a few seconds and then spits it out.

tomc1965 wrote:
I bought a 47LA6200 TV and a BP530 blue ray player. I have my cable box hooked up to HDMI 1, I have my blue ray hooked up to HDMI 2, and my XBox 360 to HDMI 3. I have my cable box hooked up to my older JVC RX880V stereo digital optical to digital optical without any 5.1 problems at all.
My TV digital optical out is hooked up to my stereo digital optical port 2 without any 5.1 problems either, sort of.
My BP530 is hooked up to my stereo digital coax to digital coax but I cannot get any 5.1 sound at all. Not through any of the digital channels on the stereo at all.
The player only comes through as standard stereo through all 4 speakers and I am not sure if it is coming through the base speaker at all.
I have tried every setting on both the TV and the blue ray player to no avail. I have even tried to not use the digital on my blue ray but when the stereo is set to play from my tv optical I still don't get 5.1 sound.
When I do not use the TV optical out but I do use the digital coax out from the DVD player I still cannot play my DVDs in 5.1. I have new HDMI 15gbps HDMI cables and a new digital coaxial cable so I don't think it is a cable thing.
The real question is how do I get to hear my blue ray and DVD discs in 5.1 sound? Will this work if I exchange my blue ray player for a Denon 3D blue ray or other player?

Blank DVD ejects instead of opening FINDER help please,sending it away 2mro

Hi, My macbook is getting sent away tomorrow to be repaired so i am trying to back up my documents before it goes but as soon as i insert a blank DVD instead of opening finder like it should (i have checked settings on syst prefs) it just ejects, so i have no idea what to do.
Please help...
Cheers
P.s
is it okay that im using a dvd instead of cd ??

I just tried a movie and it just started playing and was fine,, its just the blank dvds, have tried a few of them and they all seem to eject ?? :S

Problem loading Blank DVD

I used to be able to burn blank DVDs on the MacBook Pro. But now when I insert a blank DVD, it is ejected automatically after half a minute.
I have seen many threads on the internet. Some suggested it might be due to iTunes update. How do I have the macBook recognize the blank DVD properly so that I can burn data on it.
I have iTunes version 8.2.1 if that helps. Help in getting this issue resolved is very much appreciated. I am able to work with data DVDs properly.

I would suggest you ask this question in the Optical Drive and your MacBook Pro forum. This forum is for questions about Mail and Address Book in Mac OS X and so not the forum where you'll be most likely to get a quick answer.
Regards.

TOSHIBA DVD-ROM SD-R2312 can't see blank DVD - HELP!

HI all - I have a TOSHIBA DVD-ROM SD-R2312. It reads and plays CDs and DVDs but I'm trying to burn a video onto a DVD and when I place the blank DVD R into it to burn, I get a "Please insert media" message. The DVD-R that I'm putting in is brand new so there shouldn't be any problem there. It's driving me nuts!! It may well be that this is simply not a DVD burner - I may just be that stupid. If not, is there any way to fix this problem?
MANY THANKS!
Solved!
Go to Solution.

madmen wrote:
HI all - I have a TOSHIBA DVD-ROM SD-R2312. It reads and plays CDs and DVDs but I'm trying to burn a video onto a DVD and when I place the blank DVD R into it to burn, I get a "Please insert media" message. The DVD-R that I'm putting in is brand new so there shouldn't be any problem there. It's driving me nuts!! It may well be that this is simply not a DVD burner - I may just be that stupid. If not, is there any way to fix this problem?
MANY THANKS!
The SD-R2312 can read and write CDs, but it can only read DVDs. It has no capability to write a DVD.
http://www.netcomdirect.com/tossd10atnot.html

Blank DVDs rejected? help

today i tried to put a DVD into my mac (powerbook G4 15") but after a couple of spins and some wierd noises it just got rejected and shot out. there is no error messages nothing. then i tried to use a cd which worked fine itunes popped up asking if i wanted to burn the songs but when i put in a dvd it doesn't work. i've tried 2 different kinds of DVDs both of which are new.
heres the info from diagnostics
MATSHITA CD-RW CW-8123:
Firmware Revision: CA14
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw
Media: Insert media and refresh to show available burn speeds
is it that it can read DVDs but not write them so it just rejects it?
please help

You only have a combo drive (doesn't burn DVDs), so the drive doesn't know what to do with a blank DVD and just spits them out.

10.9.4 blank dvd-r problem

Hi !
Since I upgrade to 10.9.4, I cannot use blank DVD-R. When I insert a Blank DVD-R, I listen the spin.... but the DVD is eject and NO error message .
Console say nothing
I reboot with SHIFT (Safe mode)
I reboot in SIGLE USER MODE and do a fsck -fy - all is OK
I reboot with PRAM Zapping (command-optioj-p-r - 3 chimes)
Reboot normally
Insert a Blank DVD-R ... - eject - no error message
Insert a DVD +RW with film on it - Can read the disk/film
Goto System Preferences - Cd&DVD and change the settings for : When a blank DVD insert : Change Open in Finder to ASK
Insert the blank DVD - The Finder ask me what to do : Open in Finder : Saw it on the Desktop
Copy some pictures on it, and Click Burn - Error

Thanks for your response.
Copied Photoshop Elements directory from DVD to desktop. Got same result.
Created a disk image of the DVD on desktop and got the same result
As noted in original post tried downloading trial but Adobe Download Manager install errors out with.... "Adobe Download Manager errors out during installation (Sorry, an error has occurred. This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.)"
iMac has a wireless connection to a 50Mbps internet account. It is always on line.

DVD Problems on Mac Mini Server

I am installing a Mac Mini Server box and have two problems with the External MacAir DVD drive.
1. It won't boot the install DVD - Yes I held down the 'C' key through the boot sequence.
2. I have changed all disk insertion events (in System Preferences - CDs & DVDs) to ignore but if I insert a blank DVD (to do an unattended backup), it spits it out again if I am not logged in. If I am logged in, the DVD stays put but I need to have the console logged out.
Help...

raynewman wrote:
Help...
maybe this support article will: [_*Reinstalling software using Remote Install Mac OS X*_|http://support.apple.com/kb/HT2129].
more information in this support article.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

DVD Writer won't recognize Blank DVD (Imation)

Hi
I have bundle blank DVD brand Imation but unfortunately my internal or external dvd writer would not recognize the disc. I have tried several times using Toast Titanium 6 and when i put the blank disc it says 'please put a blank disc. In fact, the disc i haven't use at all. Does it cause of my firmware or other related problem. Please help me. Thank you.

Hi M Faza-
Since it is two different drives the first step is to try a different brand of discs.
Are the discs compatible? Did you but dual layer discs when in fact you have a single-layer burner? Are you putting the disc into the drive with the correct side down?
Luck-
-DaddyPaycheck

Blank DVD and CD not showing up in Finder or anywhere

My blank dvd and cd are not showing up in Finder. I checked my preference and deleted from my library com.apple.finder.plist. All to no avail. I have the new upgraded Lion.

AppleHoop wrote:
When I open the Disk Utility I see SuperDrive but I can't burn nor eject the disk. The only way I can eject the DVD is to restart my computer.
Do other blank discs appear normally?
Do other commercially manufactured discs (software, movies) show up normally?
Those questions are to help narrow down exactly what the problem is.
AppleHoop wrote:
I have no idea what it means to "zap the PRAM" and Reset the SMC"
Honestly i don't think those are going to make much difference for this problem. Go ahead and do them, but they're usually last resort desparation solutions, not first resort.

HT1583 What blank DVD disks are compatible with burning a film from Idvd on an applemac?

I have just finalized a project in imovie and this message came up on the screen - "Your project exceeds the maximum duration. To burn your DVD, change the encoder setting in the project info window".
I have changed the encoder setting from best fit to Professional but I am having burning the film to a dvd. The computer tells me to load a dvd or my driver is busy - which it isn't it only has a blank dvd disk in it. So I was wondering whether my DVD disks are compatible with the applemac computer!
HELP!

Hi
So I was wondering whether my DVD disks are compatible with the applemac computer!
And if You tell - what brand and type You are trying to use - I will be so much easier !
But most often the problem is
• Do NOT - insert the DVD disk before iDVD specifically as You to do this. As Desktop will catch it and try to format it as a Data-DVD - Not what You want (a Video-DVD) as Data-DVD can not be played on standard DVD-players.
To get it even better I do
• Use Verbatim - Never Memorex or NoName etc cheap brands (as they don't work OK for Me)
• DVD-R - as they play on even older DVD-players
• Burn Speed - set down to x2 or x4 MAX ! - Best IS NOT BEST at all here !
Yours Bengt W

Blank DVD +R eject from drive

Alright, I've been burning things with these same dvd's for the past couple days without a single problem, but all of the sudden today, my drive keeps ejecting the blank dvd's. It still works fine with movie dvd's, cds, and even the same dvd+r's that have data on them. What happens is, I put a blank dvd in, it sounds like it's trying, then makes a noise like a rock is in there skipping around, then it tries again and ejects. I have a macbook pro bought december 2009 brand new. Any help would be great, thank you.

If there was something that just needed to be cleaned, I don't think that the other types of discs would be working. Everything gets read just fine except for blank dvd's...

HELP!! Blank DVD problems?

Similar Messages

Maybe you are looking for