Help! Blue Screen hangs on G5 after installing Radeon 9600 pro...

Hi
I am having major problems with my G5, after working out that my old graphics card was knackered i bought a new ati radeon 9600 pro.
Every time i start up i get the apple logo then it hangs on a blue screen. I can get it to boot in safe mode and i've tried uninstalling the ati software and i've even re-installed OS X and wiped the disk to no avail.
I've also downloaded latest card drivers and looked for help on ati website but no real help there.
I would appreciate any help.thanks

I just installed an ATI X800 XT and it does exactly the same thing. Even on a new system build. Ironically enough I just took out a Radeon 9600XT that worked fine. Have you found a solution yet? I think I'm going to try and reset my pram. I'll let you know what I find out.

Similar Messages

MOVED: Logo on PC start-up changed after installing Radeon X1650 Pro 512mb AGP

This topic has been moved to Intel P4/Celeron boards.
https://forum-en.msi.com/index.php?topic=126858.0

Do >>Clear CMOS Guide<< with power cord removed.
Make sure that monitor cable is plugged well into VGA

Solved Mac Mini (late 2010) Blue Screen Hang issue

I posted several questions about blue screen hang and was able to fix my problem, after LOTS of work and searching in various forums.
I had been unable to use my computer for over a month; it was simply hanging at the blue screen, and that seemed to happen when my Finder.app had crashed, hiding all my document icons on my desktop, etc. I also had been having issues with Time Capsule and my backup Iomega disk, which is touchy.
When I tried a fix my icons had returned but I had been unable to use computer after rebooting, and I had tried every sort of key combo including trying to boot from the original install CD, etc., but nothing worked. I could not even reboot using original 10.6 software CDs, and was only able to log in Single User Mode and had tried many fixes with Terminal, and finally, this worked, two of the fixes I used are listed below.
It seems, in part, that resetting certain "privileges" worked.
This tip first tip is for Mac OSX 10.3 to 10.3.9 and even though I am on 10.6.8, I ran it, and it worked. THis is the original link location: http://support.apple.com/kb/TS1411
   1. Start up the computer in Single-User Mode.
   2. Type: in Terminal the command
     mount -uw /
   3. Press Return.
   4. Type (in Terminal, note space before mv)
      mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old
     Note space between ".plist" and "preferences".
   5. Press Return.
   6. Type:
     mv /Library/Preferences/com.apple.windowserver.plist preferences3.old
   7. Press Return.
   8. Type: reboot
   9. Press Return.
Then I followed up with this tip to "Reset certain privileges"
1. Start up the computer in Single-User Mode.
   2. Check the volume with fsck.
   3. Type: mount -uw /
   4. Press Return.
   5. Type: chmod 1775 /
   6. Press Return.
   7. Type: reboot
   8. Press Return.
When I rebooted, yayyyy! I was able to log back onto my computer, however, all icons were missing, again, so I typed this fix
/System/Library/CoreServices/Finder.app/Contents/MacOS/Finder & disown
I am not sure what 1775 means, but this fix got my computer back up, saving me at least a $150 bill at the Genius Bar.
When I typed those commands into Terminal, this is what returned, and seems to be some QXPscrpiting issue, though I have no idea what that is. and again, some Dropbox issues. If anyone has any idea what all those issues are regarding ScriptingCodes please let me know.
My-Mac-mini:~ username$ /System/Library/CoreServices/Finder.app/Contents/MacOSFinder &
[1] 892
Rangdrols-Mac-mini:~ username$ -bash: /System/Library/CoreServices/Finder.app/Contents/MacOSFinder: No such file or directory
[1]+ Exit 127                /System/Library/CoreServices/Finder.app/Contents/MacOSFinder
My-Mac-mini:~ username$
Rangdrols-Mac-mini:~ username$ /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder & disown
[1] 894
My-Mac-mini:~ username$ 2012-08-25 19:37:10.594 Finder[894:903] Error loading /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions: dlopen(/Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QX PScriptingAdditions, 262): no suitable image found. Did find:
    /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions: no matching architecture in universal wrapper
Finder: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/QXPScriptingAdditions.osax" declares no loadable handlers.
Dropbox: Entered INJECT_pthread_entry
Dropbox: Installing event loop timer
Dropbox: proc: 0x11d171e53
Dropbox: upp: 0x11d171e53
Dropbox: InstallEventLoopTimer: 0x101341dd8
Dropbox: GetMainEventLoop: 0x101341c41
Dropbox: timer installed!
Dropbox: Loading /Library/DropboxHelperTools/Dropbox_u501/DropboxBundle.bundle/Contents/MacOS/Dr opboxBundle
Dropbox: dlopen returned: 0x11bb12090
module initializer in main thread?: 1

Great work, thanks.
As far as those errors, ypu have some missing OS components it seems.
And, before the mount -uw you really should've done this...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214

Blue screen: HP Pavilion dv6 after Windows update on Aug 1.

Last year or so, I had this blue screen issue with my dv6 laptop and was solved by uninstalling KB2670838.And things have been very peaceful since then, but the blue screen re-occured recently after windows update last week.The updates were suggested by HP Support agent installed in and was for getting ready for Windows 10 installation.But my pc gets blue in every 3 min now, so I un-installed all updated job occured last week as temporal solution. Though I wish to be ready for Windows 10 installation, I need to have operable PC for my work.(This is Win7 sp1, home eddition) It would be great if anyone could assist me on this. Thank you, Piko.

I have this problem. It happens without any warning.
I don't know the reason. Please help me.

Snipping Tool stopping working after installing Office 2013 Pro (32 bit) on Win 7 Pro 64bit - help?

Have been looking at many forums to fix this:
ran SFC - no errors
rebooted multiple times
all Windows Updates are current
don't want to disable antivirus, as some have suggested
Uploaded a registry fix, which several have suggested - no soap
Note:
all other features of this PC work great - zero issues.
the issue starting right after installing Office 2013 Pro - 32bit. It runs fine.
"Paint" runs fine. "Print Screen" works fine - image goes to clipboard, and I can paste anywhere.
get the standard message everyone posts in forums:
"The Snipping Tool is not working on your computer right now. Restart your computer, and then try again. If the problem persists, contact your system administrator."
Have tried other free third-party tools, and they are cumbersome, and I love the MS Snipping Tool.
Advice? Tips?
Thanks,
Dave
DavidLum

Hi,
Import this key back into the registry, log off and back on to check if it works.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\AppID\{7F429620-16D1-471E-A81A-114992148034}]
@="wisptis"
"RunAs"="Interactive User"
"LaunchPermission"=hex:01,00,14,80,64,00,00,00,74,00,00,00,14,00,00,00,30,00,\
00,00,02,00,1c,00,01,00,00,00,11,00,14,00,04,00,00,00,01,01,00,00,00,00,00,\
10,00,10,00,00,02,00,34,00,02,00,00,00,00,00,18,00,1f,00,00,00,01,02,00,00,\
00,00,00,05,20,00,00,00,20,02,00,00,00,00,14,00,0b,00,00,00,01,01,00,00,00,\
00,00,01,00,00,00,00,01,02,00,00,00,00,00,05,20,00,00,00,20,02,00,00,01,02,\
00,00,00,00,00,05,20,00,00,00,20,02,00,00
If problem persists, please refer to another thread discussion with this problem.
http://social.technet.microsoft.com/Forums/windows/en-US/610ecb85-9aea-472c-8590-b835a0982f68/snipping-tool-fails?forum=itprovistaapps
Roger Lu
TechNet Community Support

Why is there a blue line through my moniter after installing os x snow leopard?

why is there a blue line through my moniter after installing os x snow leopard?

I have a imac 2.4 ghz intel core 2 duo 1gb 667 mhz ddr2 sdram

After installing Adobe Premiere Pro product CS6 in the program is not active PlayBack

After installing Adobe Premiere Pro product CS6 in the program is not active
PlayBack button setting when creating sequence.
Windows 7 64-bit. Intel Xeon 2, RAM 12 MB. Mxo2

Hi,
Thanks for posting that screenshot. It appears that you have opened your Sequence Settings for a DV-NTSC sequence and have made a circle around the "Edit Settings" button.
Since you chose to create a DV sequence, you cannot change those settings.
Do you have DV NTSC clips? If so, these are the correct settings.
If you do not have DV NTSC clips, do not be concerned. Just create the sequence.
Once you drag a non-DV clip into the DV sequence, it's OK.
You have the option of changing the Sequence Settings to match those of your clip in a new dialog box.
Click "Change Sequence Settings" in the dialog box.
I hope that helps.
Thanks,
Kevin

After installing Acrobat X pro as a trial, I cannot use the software and Im required to enter the serial number to continue

After installing Acrobat X pro as a trial, I cannot use the software and Im required to enter the serial number to continue
Under Continue to use as a trial it shows 0 days remaining.

Trial mode expires prematurely
http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html

Radeon 9600 Pro - Quartz Extreme not supported? Help!

I've just got a Radeon 9600 Pro PC/Mac edition, as the 9600XT that came with the G5 died on me last week. It's taken an age to get it working, I could only boot in safe mode, in the end I deleted all my existing ATI extensions, installed the ATI Displays 4.5.7 and it works. BUT ... (and it's a big but)... performance is VERY slow and System Profiler says Core Image and Quartz Extreme are not supported. If anyone's got any ideas I'd be most grateful.
Thanks. Richard.
PowerMac G5 Dual 2.5GHz Mac OS X (10.4.10) 4.5MB RAM
Power Mac G5 Dual 2.5 GHz (Late 2004) Mac OS X (10.4.10) 4.5 GB RAM
G4 Cube

OK here's the latest. I did an Archive and Install (keeping my users home folders, though), and when the G5 restarted after the install it hung - the grey screen with apple appears, the little cog rotates under the apple, then that freezes and, although you can hear the hard drive working for a little while, it gets no further.
So I booted in safe mode, which works fine - ran the 10.4.10 combo updater, reset PRAM and NVRAM, same again - won't boot. Then I installed the ATI drivers from their website - same again. I can only boot in safe mode.
So i'm back where I was when I first installed the card - the only way I could boot other than in safe mode was to delete all the ATI extensions from /System, after that it booted but reported Quartz Extreme and Core Image not supported.
ATI support still haven't replied to phone calls and emails from Monday. So I' kind of at my wits end with this. Surely if I can boot in safe mode there can't be a hardware issue with the card, can there? Could there be something wrong with my AGP slot??
Any ideas gratefully received.
R
G4 Cube
PowerMac G5 Dual 2.5GHz Mac OS X (10.4.10) 4.5GB RAM

No sleep after upgrading to a radeon 9600 pro 256MB graphics card

I swapped my original radeon 9600 pro 64MB with a 9600 pro 256MB card and now my G5 dual 2.0 tower will not sleep. Should I download the 9600 pro drivers that are on the ATI support site, they only list these drivers for OSX 10.2, 10.3 and 10.4 and since I have 10.5 I am hesitant to do so. There seems to be a definite increase in graphic speed with the 256MB card and since I will be doing a lot of iphoto and imovie on this computer the upgrade would be a big help.
Ron

Can you find your model here? http://support.apple.com/specs/#powermac
Well, if you think you saw the PMU button near your RAM that would be it, just hold it down for a second or two.
Well, I'm not surprised that the PC is faster. You're running a very new OS on a very old machine. But Macs of any vintage are great, aren't they.
When you got your video card did you install the software from the disk that came with it?
One thing you might try if not sleeping is really bugging you would be to download and reapply the entire full 10.5.5 Combo Update. That has a way of correcting things when they've become corrupted.
It's pretty massive so if you're using a modem it would take quite awhile.
http://support.apple.com/downloads/MacOS_X_10_5_5_ComboUpdate
Edit and PS: Do you have your data backed up on a drive you can start up from? Like firewire or another internal? Here is a great app, free for it's basic job, that makes perfect copies of your system and everything on it.
Message was edited by: Samsara

Installing a Radeon 9600 Pro ..

I picked up a new ATI Radeon 9600 Pro for my PowerMAC G5 D2.3 to run my 30" ACD.
I was going over the installation booklet and its all in PC lingo.
I have done sooo much reading/researching on the net the last few hours i have become STOOOPID.
can someone please explain this to me.. my biggest question is how to uninstall my current graphics card. i dont know why its escaping me but it is..
this is the original:
ATI Radeon 9600
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Thanks, Happy Holidays
cw
< Edited by Host >

Hey Thomas...
i dont know WHY i was trying to "over think" this installation.. this ATI packaging *** !! since its a dual card ie: Mac and PC its all about how to install in the PC.
i was reading a bunch of tech issues with this card and i got a little paranoid about doing something wrong..
i did just load it and believe its all in place BUT, . . my 30" ACD is still just showing a max res of 1280x800
will resetting the PMU help this ??
i am going to switch DVI ports again, and restart
THANKS,
cw

Blue Screen on Domain controllers after Updates

After patching our Domain controllers (virtual on ESXi 5.5 U2) recently we started getting Blue screens and reboots. Other changes in our environment around this time include enabling vshield drivers and scanning with Trend Micro. I have removed patches
from April but cannot remove Patch KB3020370 - there is no uninstall button. The error still persists, I have removed the Vshield driver and am waiting to see if the issue reoccurs. Can anyone assist in interpreting the details below? Also is it possible to
remove the patch KB3020370? This only appeart to affect Domain Controllers, regular servers appear unaffected.
Thanks
Below is the BugCheck event.
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000406f8, 0xfffff800018c0e14). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 042915-21762-01.
And output from the debug tool.
Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [c:\MiniDump\042815-21762-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Error: Attempts to access 'c:\windows\i386' failed: 0x2 - The system cannot find the file specified.
************* Symbol Path validation summary **************
Response Time (ms) Location
Error c:\windows\i386
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: c:\windows\i386
Windows 7 Kernel Version 7601 (Service Pack 1) UP Free x64
Product: LanManNt, suite: TerminalServer SingleUserTS
Built by: 7601.18798.amd64fre.win7sp1_gdr.150316-1654
Machine Name:
Kernel base = 0xfffff800`0185e000 PsLoadedModuleList = 0xfffff800`01aa3890
Debug session time: Tue Apr 28 13:20:34.290 2015 (UTC + 1:00)
System Uptime: 0 days 0:27:28.954
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 7F, {8, 80050031, 406f8, fffff800018d4e14}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
Followup: MachineOwner
kd> !analyze -v
* Bugcheck Analysis *
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050031
Arg3: 00000000000406f8
Arg4: fffff800018d4e14
Debugging Details:
BUGCHECK_STR: 0x7f_8
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT_SERVER
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
LAST_CONTROL_TRANSFER: from fffff800018cffe9 to fffff800018d0a40
STACK_TEXT:
fffff800`01620d28 fffff800`018cffe9 : 00000000`0000007f 00000000`00000008 00000000`80050031 00000000`000406f8 : nt!KeBugCheckEx
fffff800`01620d30 fffff800`018ce4b2 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`01620e70 fffff800`018d4e14 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb2
fffff880`0276e000 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!IopfCompleteRequest+0x4
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiDoubleFaultAbort+b2
fffff800`018ce4b2 90 nop
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!KiDoubleFaultAbort+b2
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5507a73c
IMAGE_VERSION: 6.1.7601.18798
FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x7f_8_nt!kidoublefaultabort+b2
FAILURE_ID_HASH: {0367acc4-9bb4-ab69-5701-46a2011718e9}
Followup: MachineOwner

Hi,
Dump file displays：
BugCheck 7F, {8, 80050031, 406f8, fffff800018d4e14} and Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 ).
Bug check 0x7F typically occurs after you install a faulty or mismatched hardware (especially memory) or if installed hardware fails.
A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same stack. For example, if two file system filter drivers are attached to the same stack and then the file system recurses back in, the stack
overflows.
You may reference the link below for detailed resolution about this problem:
https://msdn.microsoft.com/en-us/library/windows/hardware/ff559244(v=vs.85).aspx
Besides, you may try to restore the server to the state before installing these Windows Update.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Blue screen error Windows 7 after June 2014 Windows updates

Hi,
just wondering if someone could help determine the cause of a blue screen error from interpreting the following minidump file. My PC has been having blue screen problems after getting the automatic windows updates recently. Initially the only way I could
get the computer working was to restore the system back to prior to the updates. The updates seem to have now successfully installed but are still causing occasional blue screen errors. I have Windows 7 Home Premium
The minidump is 061614-32666-01 andthe link is as follows:
https://onedrive.live.com/redir?resid=1665B282DEF2D2DC%21111
Any help would be appreciated

Hi,
just wondering if someone could help determine the cause of a blue screen error from interpreting the following minidump file. My PC has been having blue screen problems after getting the automatic windows updates recently. Initially the only way I could
get the computer working was to restore the system back to prior to the updates. The updates seem to have now successfully installed but are still causing occasional blue screen errors. I have Windows 7 Home Premium
The minidump is 061614-32666-01 andthe link is as follows:
https://onedrive.live.com/redir?resid=1665B282DEF2D2DC%21111
Any help would be appreciated
These crashes were related to memory corruption (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Since it is more likely to be a driver please run verifier first.
1-Driver verifier (for complete directions see our wiki here)
If verifier does not find the issue we can move on to this.
2-Memtest. (You can read more about running memtest here)
If you cannot boot after enabling verifier reboot into safe mode
In Vista & win & (F8)
In win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Blue screen appears & Information about Archive & Install option.

Hey, i am using Mac 10.5.8
Yesterday it was working perfectly fine.
But after dinner when i tried to open, it dont go beyond blue screen
I have tried disk utility using original MAC OS X DVD, while verifying it says disk appears to be ok, but its says some alterations in disk pernission, i have clicked on repaire disk permission, and after that tried to start, but still it stuck at that blue screen.
Its getting that grey apple screen, then further going to that blue scren, but dont go beyond that.
Now i want to know if anyone have solution to this problem. Please help me
Also want to know, if i go for "Archive & Install " option, will that keep my data or erase my data. As i have arround 2-4 GB important data.
Please respond to this as soon as possible, i need it to be fixed urgently.
Thanks in advance.

Once the system is up and running, you should keep a back up of very important data.
You can burn a DVD.
That is why i am asking, will archieve and install keep my data safe?? All my documents and all??
Normally data should be safe after Archive and Install.
That is my experience. But there is no guarantee.
Best.

X1 Carbon Touch: Blue screen or error messages after wake up from sleep/hibernate mode

Sleep function is not consistent... While it works most of the time; yet the other times are frustrating when the result is reboot, reboot with blue screen or hang!
Rgds,
ME

Hey @mambu ,
Welcome to the HP Forums!
I understand you're having issues with screen brightness and blank screens since updating your dv6 notebook to Windows 8.1.
Looking at the available drivers for your notebook you will find there are no drivers for Windows 8 or Windows 8.1 for this notebook. This will drastically affect how the graphics card (GPU) functions in this Windows environment.
Your notebook has a feature called switchable graphics. In order for switchable graphics to function properly you must use drivers provided by HP directly for the graphics cards to work properly. Since HP didn't release drivers for Windows 8 or 8.1 for the GPU setup on your notebook the brightness functions may not work and you may notice issues with the display. It would make sense that this issue is present after sleep or hibernation because the drivers need to be initialized and are encountering errors because they are not the correct drivers, or are generic Microsoft drivers and cannot communicate properly..
The only professional suggestion I can make is that you reinstall an operating system that your notebook hardware has available drivers for. Windows 7. Sorry for the bad news.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Help! Blue Screen hangs on G5 after installing Radeon 9600 pro...

Similar Messages

Maybe you are looking for