HELP: Bluetooth to Iphone4/Automatic Reconnect

Please help: Connect Iphone 4 to bluetooth headset (BlueAnt V1); walk out of range and then back into range....how to set Iphone4 to reconnect automatically?>?

Automatically without having to turn on and off the headset or Iphone4 connection; Old Moto Razor did this automatically

Similar Messages

Iphone 5s no longer automatically reconnects with my car bluetooth

It used to be that when i got into my Subaru the phone would automatically reconnect with my bluetooth. No longer the case. What gives?

Hi mzjody,
Welcome to the Apple Support Communities!
I understand that Bluetooth issues with your vehicle can be very frustrating. In this situation I would recommend the troubleshooting steps in the attached article for troubleshooting.
If you can’t use a Bluetooth accessory or car kit
Have a great day,
Joe

Iphone automatically reconnecting to bluetooth speaker?

I just upgraded to the iphone last week and have been fiddling with an old Sony Ericsson bluetooth speaker (MBS-100) to work with it. Connecting to the speaker is no problem, but to reconnect I have to go to "settings > general > bluetooth" every time. Is there a way that the iphone can recognize that it's within range and automatically display the icon next to "play/pause"? (Ex. http://i.zdnet.com/blogs/airplay-iphone-2.jpg)
Thank You,
W. Stuller

I've tried it a few times. I think that the latest iOS version must have excluded the drivers to automatically reconnect. It is a very old router and I'm considering to get another.

Bluetooth devices can't reconnect to iPhone 4 after some time or when A2DP playback has stopped (since iOS 5)

Hi,
so I've had these Bluetooth issues since I updated my iPhone 4 to iOS 5. I've searched and searched and found nothing, so finally I decided to post my story here.
First of all I'd like to point out: I've tried everything! ..but more on this below.
I have a Bluetooth capable car stereo, the Sony BT2600, in my car. It works like a charm and I've been using it for listening to music via A2DP (Bluetooth Stereo Audio) since I updated my HTC Prophet to Windows Mobile 6 back in 2008. Since 2009 I've been using it with an iPhone 3G, then a 3GS, and finally with my iPhone 4, which I've owned since october 2010.
Calling worked, listening to music worked, and since iOS 3, I think, AVRCP has been working fine, too.
Now to the things that worked until before the iOS 5 update:
When I got into my car, turned on the ignition, the car stereo automatically tries to connect to the last connected device, so unless BT was disabled on the iPhone, it connected without problems and I could start music playback by pressing the Play/Pause button on the unit, without having to pull the iPhone out of my pocket.
When I got out of my car, turned the ignition, and thus, the car stereo, off, the iPhone would of course disconnect.
Here's where it becomes interesting: When I would go for another drive in my car, the head unit would reconnect to the iPhone, just as in the first point of this list.
Same when starting the car's engine, which cuts the power to the head unit for one second. It would automatically reconnect to the phone and I could press the Play/Pause button twice to resume playback.
Furthermore, when Repeat was not enabled on the iPhone's iPod application and the current album / playlist / podcast would end, the Bluetooth connection would remain active, which was good, because I would still be able to receive calls using the hands-free functionality of the Sony head unit, and I could restart playback by pressing the Play/Pause button on the latter.
My Apple aluminum Wireless Keyboard would also connect flawlessly whenever BT was enabled on the iPhone.
Also the Bluetooth tethering feature would work fine - I could just connect to it via my MacBook's Bluetooth menu, without having to do anything with the iPhone.
Since I updated to iOS 5,
my car stereo doesn't connect to the iPhone unless it's been less than a minute that I'd enabled Bluetooth on the iPhone.
same with the keyboard.
When music playback stops (at the end of an album/playlist/podcast, with Repeat disabled), the whole Bluetooth connection is instantly lost, and can't be regained until I disable and re-enable Bluetooth on the iPhone. Which means that I can't take calls in my car after listening to an album or podcast or playlist when I forget to enable Repeat.
Whenever I have to re-start my car's engine, the connection is, in more than half of the cases, lost until disabling and re-enabling BT on the iPhone.
Same with tethering.
What I've tried so far:
deleted all BT devices from the iPhone's list, re-paired - nothing
rebooted, many, many times - nothing
restored to iOS 5.0.1 - nothing
hit "Reset Network Preferences" - nothing, the BT devices even stay in the list
hit "Delete All Settings" on the iPhone - nothing, BT device list still the same
restored to 5.0.1 again - nothing
restored to iOS 5.1 - nothing
restored to iOS 5.1 from DFU mode, setting up the iPhone "as new iPhone". Big step, PITA, but still - nothing. At least this has cleared the BT device list. But the issues remain. (So does the battery drain issue, by the way, but that's another story)
So. I've oficially run out of ideas. Any inspiration? Many thanks in advance.

I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen.

10.9.2 upgrade and now wifi will not automatically reconnect after wake from sleep

I upgraded to 10.9.2 on my mid-2012 Macbook air and now when i wake the laptop from sleep the wifi will not automatically reconnect. I have to physically click on my network to re-join it.

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. Reinstall OS X.

System does not automatically reconnect to wifi network after sleep/restart

My iMac G4 (2GB RAM, 10.5.1, AirPort Extreme) does not automatically reconnect to my wife network after waking from sleep or restart. I just recently switched the iMac from a wired to wireless set-up though the machine has always had the AirPort card. In wired mode, it always automatically found the network.
Network preferences have the "Ask to join new networks" checkbox selected. Below the checkbox it reads "Known networks will be joined automatically."
My wireless router is Linksys WRT150N, security type is PSK and encryption method is AES key.
Anyone have any suggestions?
Thanks!
bk

I'm having the same problem, the only way i can connect to my wireless network is to restart the computer, and open safari immediately. Then once it goes to sleep or i shut the notebook, i have to restart it again to use the internet. It's driving me nuts, and nobody knows how to fix it. I've tried firefox (it didn't help) and my sisters macbook connects just fine to my network, so it has to be a network setting. I'm going to schedule an appointment with a mac store tomorrow. so I'll post again when they fix it for me. hopefully i will understand how they solve the problem so i can post it to you guys

Automatic reconnect to wifi network

there is a way to automatically reconnect to a wifi network after the router has been switched on-off?
that's because at home we have a wifi network and router automatically switches off for 1hr during the night, i leave my laptop online but when i wake up in the morning it's always offline cause when the router turns on again my mac won't connect automatically to the network and i have to do it manually!
what can i do??
thanks

I'm having the same problem, the only way i can connect to my wireless network is to restart the computer, and open safari immediately. Then once it goes to sleep or i shut the notebook, i have to restart it again to use the internet. It's driving me nuts, and nobody knows how to fix it. I've tried firefox (it didn't help) and my sisters macbook connects just fine to my network, so it has to be a network setting. I'm going to schedule an appointment with a mac store tomorrow. so I'll post again when they fix it for me. hopefully i will understand how they solve the problem so i can post it to you guys

Automatic reconnection

Hello,
I would like to know if it exists JMS providers providing an automatic reconnection after a network shutdown (and the restart) .
I mean if my application works actively and then the network shutdown --start then my application doesn't work anymore so how can I specify that the network is back and then the JMS connection and transfert of message can restart?
Thanks for any advice

Hi,
Commercial products usually provide transparent client reconnection.
It is the case for ArjunaMS, Fiorano and SonicMQ (I think).
Hope this helps
Arnaud
http://www.arjuna.com

When my bluetooth device disconnects, automatically launches iTunes. Why?

I've seen some other posts on this, but none that solve the question. iTunes (11.1.5 (5)) automatically launches evertime I disconnect my bluetooth speaker or the speaker times out and shuts off. In iTune device preferences, I checked the box "Prevent iPods, iPhones, and iPads from syncing automatically". iTunes is NOT paired with any Remotes.
I wondered if Spotify might be the source of the problem, but when I closed Spotify and ran the test (disconnect my bluetooth speaker), iTunes automatically launched.
Any help?

Same issue. In former Version of OSX itunes autolaunch could be disabled by setting "no action" when a CD is inserted (in case your mac still has a CD drive). But with 10.9. this does not help. For some reason Apple thinks as soon as something happening with audio it's the deepest desire of every Mac owner to start to use iTunes. What makes this totally weird is that iTunes is started when the speaker is DISconnected.
Haven't found any solution, and have to say it ***** big time. Please, apple, don't dictate your users which app s they "want" to use on what occasion... if there is an autolaunch mechanism there has to be an easy way to disable it, like iPhoto autolaunch when you connect a camera.
The constant launching of iTunes on every occasion I really do not want to use it is painful.

Automatically reconnect AFP mounts

I have a RAID set up as an AFP network drive that I am using as a continuous RSYNC backup for my server. I have it set up to automatically connect when the computer starts up, however, it will frequently disconnects itself and halts the back up process. It seems to happen randomly too. Is there any sort of application or script that can help keep this drive mounted all of the time? Or at least automatically reconnect it once the drive goes offline for a minute?

ControlPlane | Context Sensitive Computing

Wireless network does not automatically reconnect after sleep

I have a Belkin wireless G+ mimo modem router network. When I wake the mac from sleep it does not automatically reconnect to my wireless network and i have to manually select the network from the airport icon in the menu bar and then it connects without having to reenter my secure password. How do i set the mac to auto connect to the network after sleep? There are about 6 other wireless networks in range which may be effecting this reconnection.

In may case the network was already at the top of the preferred networks list.
Based of of a hint over at MacOSXhints.com, here's how I fixed this problem:
1. In the Network references pane, delete the Airport connection that does not like to reconnect.
2. Click Apply and Quit the System Prefs app.
3. Put the computer to sleep.
4. Wake the computer.
5. Go back in to the Network pref pane and re-add the Airport connection. Do not try to connect to the network at this time.
6. Click Apply and Quit the System Prefs app.
7. Use the Airport menubar app to connect to your network.
8. Verify connectivity
9. Put the computer to sleep.
10. Wake the computer.
11. Verify connectivity
My machine now consistently reconnects when coming out of sleep or restarting.
God luck!

HT1386 Pleae help connecting my iPhone4 5.1.1 to my laptop with error 0xE8000012, I tried the the mentioned steps in this regard, but hopless.

Pleae help connecting my iPhone4 5.1.1 to my laptop with error 0xE8000012, I tried the the mentioned steps in this regard, but hopless.

If you have some idea where the problem might be, you can get finer-grained control over what goes into the error log by setting nsslapd-errorlog-level appropriately. For the settings, see http://docs.sun.com/source/816-5608-10/config.htm#140331

Guys plz help meeee my iPhone4 is not turn on

guys please help me, my iPhone4 was turned on I went to see TV, after that I went and took my iphone. I clicked on the main button and saw that it didnt turn on, so I held up the above button (turn off and turn on button) but it didnt answer. now I did every thing that I could but it didnt turn on. so help me how can I turn it on again?

Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

Everytime i attend a call my iphone4 automatically activates the loudspeaker .. what should i do??

everytime i attend a call my iphone4 automatically activates the loudspeaker .. what should i do??

Settings>General>Accessibility>Physical & Motor>Incoming calls>Default

Can VPN Client automatically reconnect to virtual cluster IP..

Can VPN Client automatically reconnect to virtual cluster IP when current ASA fail or users must manually reconnect in VPN load balancing implementation?
Thank you in advance
Sirote

In my ASA 7.2 config, there is no "management-access inside" command, but it still work. Anyway, after I added this command in my ASA 8.0 config, it work. Thanks a lot.

HELP: Bluetooth to Iphone4/Automatic Reconnect

Similar Messages

Maybe you are looking for