Help! Blur tool issues with Adobe CC/Windows 8/Wacom Bamboo Fun tablet

Hi everyone, would really appreciate your help with something frustrating. I have been using Adobe CC quite happily since it was released, but after upgrading to a faster desktop that runs Windows 8, for some reason the Blur tool is playing up. I've upgraded drivers and cleared caches but it keeps happening sporadically. Sometimes it will work, sometimes it wont. My pc isn't the fastest in the world (ie not video editing speeds) but is perfectly competent to run Photoshop; I've run the program on slower machines and am used to the lag that happens there, so this is something different.
What happens; the blur tool is slow, and inaccurate to the extent of being unusable. When I attempt to blur out a section, for example a section of background, it will instead blur out a totally different section of the photo, for example, the face of the subject.
I use a Wacom Bamboo Fun tablet CTE 450; I have upgraded its drivers as well.
Any suggestions would be greatly appreciated; this is only a small thing but is slowly driving me mad! I don't use the blur tool constantly so it isn't preventing me from doing anything, but it is handy when it works and extremely irritating when it won't!
Thanks in advance!!

Also adding; the same error happens when I use a mouse, which seems to indicate it isn't the tablet's fault.

Similar Messages

HELP!! Issues with iTunes and Windows 8.1.

So I recently upgraded to a new laptop with Windows 8.1 and I have been experiencing some issues that I need assistance with. So far the issues I need help with are:
When I try to get album artwork for my songs, it gets through a small fraction then just kind of freezes.I have a lot of songs and albums but I have never had this problem before.
When I try to connect to the iTunes store, it takes quite awhile and then I am left with either a blank screen or album/song/etc. names and no pictures.And when I click on another link, it takes forever (again) and I experience the same issue while trying to travel to the new page.
I don't know what else to do and I can't figure out a solution. Please help me!!!

Hello RavensFan94
For both your issues, it sounds like you are having a hard time connecting to the iTunes Store to get album artwork and viewing content. Check out the article below for some troubleshooting options to get it working again.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Regards,
-Norm G.

Issues with Adobe and Windows 8

I'm trying to use Creative Cloud's free trial run, but I have come up against a HUGE issue. For the last four weeks, I have tried in vain to get CS6 to install on my computer. I have a Dell Laptop with Windows 8 (which I am already quite disliking), and I have tried a multitude of methods to get the programs to install. I have tried using the adobe download manager (the download fails after downloading every time), directly downloading the programs (to which I get an error when the instillation is at 99% saying I don't have enough disc space, and I have plenty), changing the ULA(?) code in my registry to get the instillation to run, and trying to run the install under Window's 7's settings, to no avail. I'm getting extremely frustrated, is there something I'm doing wrong, or is this a common problem with Windows 8?

Hi Automatic motion,
Try disabling non microsoft startup services viz antivirus etc ( Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-servic es-windows.html ) and then try installing.
You might also want to enable the hidden admin account ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-adminis trator-account-on-windows-vista/ ) and then try install in this account and check.
You can also troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5 -cs5.html.

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acr

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??

Have you opened Acrobat and gone to Help>Updates to get an updated install?

Issues with Adobe Reader with Windows 7

I'm having big issues with Adobe Reader. It won't open/display PDF files and closes on it's own!

Not sure if it can help you but I believe you have NVIDIA driver on your machine. Which version it is?
Many tumes issue is seen with NVidia drivers on the machine. Not only Reader but other major apps also crash due to issues in this module.
Please update the NVIDIA graphics card drivers. More information is provided in the below links
http://windows.microsoft.com/en-us/windows/update-driver-hardware-isnt-working-properly#up date-driver-hardware-isnt-working-properly=windows-7
Please let us know if you still face this issue.

Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows

Here's some information on an issue that we've identified with Matrox products and Encore CS5.1:
"Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows"

Still flickering on Encore even when rendered in MPEG-2 DVD in Pemiere Pro CS5.5. Looks perfect in Premiere Pro.
Any other ideas?
EDIT: Was looking for Google for people with similar problems to me and I came across this http://forums.adobe.com/message/3959757?tstart=0
I am currently re-rendering the video in PAL DV Widescreen MPEG-2 DVD and using maximum render quality.

Issues with Adobe Professional 9

Hi
We are facing some issues with Adobe Professional 9,
The problems are as follows while converting the DOC file to PDF using Adobe Proff 9.
1) Bullets are missing
2) Crossreferences are not working
3) adding junk characters in header.
Can you please help me on this.
We need to understand the issue.
Manohar S S

Just some stray thoughts on the topic:
Use Adobe PDFMaker to create the PDF from the MS Word file.
When a MS Word cross-reference is inserted, ensure that "Insert as hyperlink" is ticked in the Cross-reference dialog.
In the configuration of Adobe PDFMaker's Preferences, ensure "Add Links" is ticked (under the Settings tab).
Ensure that the installed Acrobat (and associated Adobe PDFMaker) is working with a compatible version of Office.
See: http://kb2.adobe.com/cps/333/333504.html
For all characters used in the source MS Word file; ensure that the characters used provide proper mapping to Unicode.
Do not use characters that rely upon a restricted character value.
When using Word Headings/Styles that incorporate the bullet character, ensure you work from those that are "built-in" to MS Word.
If you are working out of Windows 7 / Office 2010 you need to move up to Acrobat X.
Be well...

Issue with Adobe maybe?

Hi,
So I am having issues with adobe reader. I work as tech support and someone called in with issues. His issue is:
Cannot open forms and enter information then save them back using his program. The webprogram he is using is JIDS. JIDS requires that the pdf be opened in the webbrowser. This is so it can be saved back to their database or whatever.
The issue is when he tries to open the document in ie it opens it on his local adobe program not in the browser. I checked the addons and adobe will not appear there. (in any of the catagories plz do not reply im in the wrong view or whatever) If I open a force ie to open a pdf nothing appears (makes sense because it says there is no addon). I have uninstalled and reinstalled adobe multiple times from adobe.com (it is up-to-date) every time says installed successfully. This is a new computer and does not have older versions on it. I have removed it using the adobe cleaner then reinstalled no change. I tried reapplying the acropdf.dll using regsvr32 both in the 32bit and 64 bit locations (\windows\system32\ and \windows\sysWOW64\) and I keep getting an error that says loaded but dllregisterserver error 0x80070005. which is permissions error, but he is the only admin on the pc(local admin) and has full access, uac is shut off and i was using the cmd in run as administrator mode.
Since i couldnt find anything else on this I dicided to use firefox since ie and FF are only browsers allowed by JIDS. I downloaded newest FF and FF does say adobe reader addon is installed, but when i open the pdf in the JIDS program the fields are not editable and it has a popup ontop of the browser saying something about compatability issue and asks me to open with different program (clicking it opens the pdf in the adobe reader program and it is then editable but will not save back to the website, no supprise there).
He is using windows 7 64bit logging onto a domain. Using IE9 and updated adobe reader (11.0.03) and newest version of Firefox
Windows is fully up to date.
His computer is the exact same model as the one next to it that works perfectly fine and he hasnt done anything that could have messed up the system files (he knows he is bad with computers and doesnt do anything without asking someone else first). Mostly only uses the webbrowser and another program thats installed on there for him already.
I plan on installing adobe reader X or possibly older version of IE/FF to see if these might help. I also will be checking/disabling what he has for AV (i think its just windows security essentials but im not sure will doublecheck).
Any other suggestions on things to try? What is could be causing these issues?

Probable issue with the Firefox is that in the documentation it is poorly worded poorly, JIDS only support FF 17.
What is the issue with IE if that does fix the FF issue?

Issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4

Since upgrading to the final version of OS X 10.10 Yoesemite I have issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4. I don't recall their being any issues while I went through the Beta testing process. The Adobe products (PSE and PE) give me a configuration message "error 16" and it tells me to uninstall and reinstall. I have done this a few times/ It seems to go through the whole install process until the startup where it crashes. I downloaded PSE 11 and at least it starts up but I haven't used it to do anything. Also DiskWarrior 4.4 does not load up from the hard drive anymore (error message) and when I boot it up from disk is doesn't give me the option of correcting permission when repairing files and folders.
At lease all of otheother software including Photoshop Lightroom 5.6 seem to be working.
Very sad

Barbara,
Yes, I accessed the "updates" menu from the Help pull-down menu. I also accessed the updates using the Mac Terminal application with results shown in my original post. Regardless of whether I used the Help menu or the Mac Terminal app, the AAM tool still responded with:
Update Failed
   Updates could not be applied
   The error log file may help you in identifying the problem. The, try updating again. If the problems persist, contact customer support for further assistance.
The error log file read as follows:
   Photoshop Camera Raw 8.5
   There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
   Looking at the the output of the Mac Terminal app, it shows:
   ... hdiutil: attach failed - no mountable file systems
   Is this relevant?
Regarding your follow-up message pointing to:
Update 12.1 installation errors | Photoshop Elements, Premiere Elements,
the files referenced in this link are present, are correctly named, and they are in the correct locations, so it would appear that these issues are not related to the ACR 8.5 update problem
Thanks

I am having a file moving issue with Adobe Reader XI

I am having a file moving issue with Adobe Reader XI on a Windows 7 32bit system. When Adobe reader is set as the default program for PDF files moving files from one directory to another takes over a minute, regardless of the size of the file. When the default handler is set to another program, like Nuance or PDF Creator, this is instant. What in Adobe Reader is causing this and what can I do to speed up file moving? Any help will be greatly appreciated. Thank you.

I am using Windows 7 home edition and using Internet Explorer 10
The PDF's are online on websites that I am trying to open. Both on the site as well as trying in a new window.
Thank you
Jeff

Having issues with Adobe Flash player hanging the browser

Having issues with Adobe Flash player hanging the browser.
WIN 7 enterprise 32 bit / Firefox 19.0.2 /
Internal company website keeps giving attached screen shot error, and hangs the browser when error pops up.
Steps taken:
Uninstalled Adobe Flash player with the file “uninstall_flash_player.exe”
Deleted provided directory in instructions
"Copy and paste the following and click OK.
C:\Windows\system32\Macromed\Flash
Delete all the files in this folder."
Rebooted PC and reinstalled the flash player directly from “http://www.adobe.com/support/flashplayer/downloads.html”
Re launched company website and received same error.
Repeated above steps as well as uninstalled Firefox browser. Even went so far as to remove all profile information to start fresh from all profiles on the laptop with the same results.
Note: The web page will work without the flash player plugin, and my page doesn’t hang the browser. Required to open page in FireFox per company policy.

I'm sorry you're encountering this. Could you paste a few of the most recent report ID links displayed when you go to "about:crashes" in the Firefox address bar?
As for workarounds, the first thing I'd suggest is trying our 11.7 labs release which you can get here: http://labs.adobe.com/downloads/flashplayer.html
If that doesn't help, please try the troubleshooting steps outlined in this FAQ:
How do I troubleshoot Flash Player's protected mode for Firefox?
In particular, I'd recommend temporarily disabling protected mode (for troubleshooting purposes only) to see if that addresses the issue.
Thanks,
Chris

Having major issues with Adobe Media Encoder (AME) - exporting with weird image flickering/colour anomalies, crashing regularly, freezing during encode...!

Hi Guys
I am having some real issues with Adobe Media Encoder (AME) at the moment. It appears that I am unable to encode an h.264 for Vimeo from a Premiere Pro Project file at the moment without at least some weird image issues that are not supposed to be there. These include weird flickering, colour changes, artefacts etc. This is if I am lucky...often I am unable to get the process to complete as the application either crashes and tells me there has been a problem or it simply freezes and I have to force quit the application and often restart my machine.
The problem seems to not to just be with h.264 for the web encodes but also with BluRay h.264 as well. As yet I haven't seen if there is a problem with MPEG-2 for DVD so I will check this out too!
Does anyone else see this happening or does anyone know what might be the problem?
I thought the Premiere Pro project might have been corrupt so tried a different project but the same issues were happening here too.
Any help would be really gratefully received.
Cheers
EDIT - I have just found this online which is exactly the problem I am having! Thanks a bloody bunch Apple! 10.9.3 causing headaches for Mac Pro users | MacIssues
Message was edited by: Alex Cameron

Agreed, I now have a project to GET OUT, and AME crashes consistently 1/3 into the render. It appears to halt all processing after (real time) 00:02:30
Am seriously considering uninstalling CC as I am beginning to find other issues in some apps, and going back to CS6/MC just so I can get work out. Durn it Adobe this is AWFUL!!
Alright, let's try to be constructive instead of throwing rocks... but the frustration level is high, and I have material on deadline. Let's get with this, guys...
What OS Win7, 64-bit
What version of AME/PPro (Please be specific by getting the full version number in the About Adobe Media Encoder screen) 8.2.0.54 Ppro: 8.2.0 (65)
When is it crashing (Again, the more detail here about where it was in the encoding process the better) roughly 1/3 into the sequence, always on exactly the same frame - tried replacing the clip with something different to see if it was a timeline error, and NO EFFECT.
What is your source (PPro project or media file (what kind?)) PPro
If the source if a PPro project, does it work when exporting directly from PPro? NO
What format are you exporting to? H.264, QT, WM, tried everything my client can play.
Do other formats work? MPEG2, QuickTime, etc? NO
Have you tried with GPU rendering on? How about turning it off by switching to Software-only mode? Mine doesn't have any choice, it's software-only.
Have you tried disabling Native Sequence Loading? (AME Preferences: General > Enable Native Sequence Loading) No effect
Other things I tried: uninstalling/reinstalling AME, setting cache to a fast local disk.

Viewing issue with Adobe Reader

Hi there,
I'm having an issue with Adobe reader, which appears to be not related to platform or version. To cut a long story short. I've created an A4 design in Photoshop. Part of this design includes some boxes, that have been given an outline (border) effect. Also bare in mind that the Photoshop files are being created at 350dpi.
When I put my design into Illustrator/ InDesign and then generate a PDF file. I then go and look at the pdf file and when the zoom is at 100%, the edges of the boxes are not straight, you'll get a slight offset half way along for example. However, when I zoom in to 400% the problem disapears and the lines (edges) look perfectly as they should.
Does anyone know about this issue? I'm worried that when I print from the PDF, this issue will be in the print-out - or will it be OK when I print it seeming as it dissapears at 400% zoom.
Any prompt answers or help would be appreciated.
Kind regards,
Luke

Can you open Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

Privacy/Security Issue with Adobe Flash 10

Not sure if anyone has noticed this or not, but there is a
bizarre (if minor) privacy/security issue with Adobe Flash Player
10. I came across it while attempting to upload a file to Flickr.
Previous versions of AFP do not exhibit this problem.
Specifics: using Firefox 3.x, Vista.
The problem: When Flickr calls the "open file" dialogue in
Flash 10 (in order to upload files) via the "Upload Photos and
Videos" link, at the bottom of the dialogue, to the right of the
"File Name" box, sits a common UI element that brings up a dropdown
menu of what appear to be (or at least are supposed to be) recently
viewed or downloaded or accessed files. Actually I'm not sure how
Flash 10 compiles or accesses this list of files, but at any rate,
a list of files come up.
The problem is that, as far as I can tell, the list of files
that come up reference a long list of files, some that are very old
and that no longer exist, and that there is no way that I can find
to clear the list. This is a minor security/privacy issue, as
generally there should be a way to prevent a dialogue from
displaying a long list of past-accessed files by clearing a cache
somewhere or other -- imagine if it was impossible to clear the
history of a web browser, for example -- this would be considered a
pretty significant privacy issue. I have tried everything from
flushing the browser cache to uninstalling and reinstalling the
browser to uninstalling and reinstalling Adobe Flash to using the
Flash Settings Manager to clear out the Flash saved sites to
turning off Vista indexing to clearing out Vista's Recent Items
list. None of these actions did anything to clear out this list of
files. I can find no references to these files anywhere when I use
Vista Search (with unindexed and system files searched as well),
and I can find no reference to the files anywhere in the registry
(I checked just in case Flash 10 was storing this index in some
really bizarre place.) I've linked to a screenshot below of what
I'm talking about -- most of the files listed below were deleted a
long, long time ago, and so I have no idea why this dialogue refers
to them.
Screenshot
Is there a simple work-around for this that I'm unaware of?
Even if there is, there needs to be some more obvious way to clear
out this list. Where is this information being stored, and what
criteria does this list use to "put a file on the list"?

Thanks for putting me on the right scent. That's what I'd
originally thought, too -- it's just that the file-> open dialog
was giving an entirely different list of files with other
applications, so I assumed that it must be Flash that was the
culprit. Turns out the reason it was different with Flickr was
because it was restricting the file results via a long string of
video and picture filetypes that are compatible with the Flickr
service.
It turns out the information I'm looking for is buried deep
within the registry. The only way to clear out this list of files
is to delete the following key (or specific subkeys):
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\ComDlg32\OpenSavePidl MRU
Seems more than a little stupid to store such information in
the registry if security is your concern. Vista beguiles me
sometimes.

Firefox 3.6.23 having freezing and rebooting issues with Adobe Flash Player 11 Plugin

Firefox 3.6.23 is experiencing constant freezing and rebooting issues with Adobe Flash Player 11 Plugin, not sure if it is a conflict issue or not.
Since the update there had been no reported issues till today when the blue screen came up on me, this issue prior to plug in 11 had occurred at least 6 times, this issue only happens on firefox.
I do not wish to update since recent firefox browsers seem to have a lot of ongoing issues.

Anyone able to help please?
Thanks.

Help! Blur tool issues with Adobe CC/Windows 8/Wacom Bamboo Fun tablet

Similar Messages

Maybe you are looking for