HELP!!! Boot Device Missing!! Hard Disk Error!!!

I turned on my laptop and it said "Boot Device Missing" (it said Hard Disk Error sometimes) so I went in to the systen diagnostics and did a memory test (which I passed) and Hard Drive Check. I heard that if you pass the hard drive check you can fix this problem, but it said SMART Check and Short/Long DST was not available. I also went to the bios and I changed the settings to defaults (F9) and saved and exit (F10), tried shutting the laptop down, removing all the CD, USB, everything, and turned it back on, but those didn't fix the computer. I also watched some videos on Youtube that you can unscrew the bottom part and check the hard drive but I couldn't find where to unscrew and look for the hard drive. Is there any way that I can fix this without sending it to repair because I need to use this laptop everyday.

Sounds like the hard drive has failed and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used.
Your Maintenance & Service Guide shows what size hdds you can use.Also shows how to replace- or check connection for secure fit before replacing.
http://h10032.www1.hp.com/ctg/Manual/c04402649
Btw-any tme you need it you can access User Guides, Specs, drivers,etc for your model using the button at top of this page titled "Support", then click "Support & Troubleshooting" from the menu. Enter your Model Number. After entering click 'Go".
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

Can't boot into bios due to SMART Hard Disk Error

My hard drive failed and now im getting constant pop ups to replace it
I'm thinking about transfering windows to an external drive until I can replace the internal one but I need access to the bios to set the boot priorty options anytime I use f10 to boot into the bios it's like it's skipped over and gives me the smart hard disk error screen where my only options are to boot into windows or run diagnostics.
I tried running diagnostics but each test resulted in an instant failure.

Yes take out hard drive and connect it to another PC. Get help from your service manual for procedure for taking it out:
http://h10032.www1.hp.com/ctg/Manual/c02659236
Adapter, something like this: http://www.amazon.com/Anker®-Converter-Adapter-Cable-included/dp/B005B3VO24
For configuring boot order, try this:
http://support.hp.com/in-en/document/c00364979
Tap f9 key soon after powering on notebook, if the above don't work.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

SMART Hard Disk Error after replacing HD

Hi!
I SOOO hope that someboidy is able to help me.
I am NOT a novice but I am stumped.
I replaced the HD with the same model HD that the COMPAQ CQ58 came with because the old HD was shot - how that happend eludes me.
Anyhoo, after screwing a new HD in I wanted to put OS on it but I get the following error right after pushing gthe power button on:
SMART Hard Disk Error
The SMART hard disk check has detected an imminent failure. To ensure not data los, please backup the content immediately and run Hard Disk Test in System Diagnostics.
Hard Disk 1 (301)
F2 System Diagnostics
ENTER - Coninue Startup
For more information, please visit: www.hp.com/go/techcenter/startup
I'll get back to the LINK later.
First I pushed ENTER. What appeared is:
Boot Device Not Found
Please install an operating system on your hard disk
Hard Disk (3FO)
F2 System Diagnostics
For more information, please visit: www.hp.com/go/techcenter/startup
I pressed F2 and this is what happens:
I get the diagnostics Menu.
Version 1.6.0.0 - BIOS
For more information, please visit: www.hp.com/go/techcenter/PCDiags
Memory Test
Hard Drive Check
Language
Exit
I pressed Hard Drive Test did the "Quick Check" and this is the message I get:
SMART Check : NOT AVAILABLE
Short DST : NOT AVAILABLE
==============================
For more information, please visit: www.hp.com/go/techcenter/PCDiags
I tried the LINK, it doesn't exist.
I also went to the Boot Options in BIOS in order to start from a USB stick and put the USB HD in first place.
When I reboot it does not recognise any USB stick. I tried Windows 8 and UBUNTU which ususally works on all machines I recoverd so far.
No whatsoever luck.
As I mentioned before:
I am stumped.
I have no recovery CDs and can't make one since I don't run Win8 on any of my PCs.
So, any suggestions????
Please HELP
Thank you in advance
Kai Henry
This question was solved.
View Solution.

Plug the usb flashdrive into one of the notebooks's usb ports Press the power button and then immediately tap the Esc key to invoke the startup menu. Choose F9 (boot opions) instead of F10 (BIOS setup) in the startup menu and then select the usb flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Hard disk error on Toshiba Satellite A505 56980

Hello,
Windows keeps bringing up a notification that the hard disk on my Toshiba laptop(A505 56980) has errors. It recommends for me to get hardware technical support to determine if the disk can be repaired or needs to be replaced.
My disk name is TOSHIBA MK5055GSX and I have only one volume C:\ drive.
I am running my antivirus scan just to make sure I don't have any active viruses or trojans damaging my hard drive. My computer freezes for a few seconds on and off. Not sure if this is related to the hard disk error.
I have backed up all my info and also created system recovery disk. I also have the recovery disks from when I got the laptop.
My question is how do I go about diagnosing the hard disk error and geting it fixed? What is the warranty for hard disks? I bought this laptop beginning of last year.
I appreciate any help I can get to resolve this problem.
Thanks
- Priya K

Priya
Perhaps your model name/number is Satellite A505-S6980?
Satellite A505-S6980 Specifications
Satellite A505-S6980 Downloads
Restart your system, when you see the Toshiba logo start pressing the F8 key repeatedly until you enter the Advanced Boot Options Menu, choose 'Repair Your Computer'.
This should take you to the Windows Recovery Environment (WinRe)
Select 'Command Prompt', and type in this command, hit the 'Enter' key, and restart your computer:
chkdsk c: /r
This will check your hard drive, try to recover any corrupted files/data it can, and repair any problems it can. It takes a while to run anyway. But, if there are problems with your hard drive, it could take many hours. Just keep checking back, it will give a report as it goes, and when it's finished.
Let us know the results. Good luck.
Mike

Windows HP laptop won't boot Windows - possible hard disk failure!

Hi there!
A month ago my HP Pavilion dv6-6b57sa completely froze mid-use, and was unable to move the mouse or get any sort of response.
Naturally I held the power button to hard shutdown and restarted. Ever since then I have been unable to boot Windows 7 (the original OS) properly, and all I could get to was a Startup repair which took days to try to fix the issues, eventually coming up with a message saying it was unable to fix the errors.
Today I decided to ditch the data I had stored and do a fresh install - using the HP wizard by pressing F11 on boot and using a newly created USB Windows 7 install drive. After getting to the point of install process of Windows just loading the files, after choosing a hard drive partition successfully etc. the installation quit, citing a number of issues (screenshots link are below).
So I then try to restart the computer, and get a 'SMART Hard disk error' (screenshot link below) and when I select continue startup from there, it says Windows failed to start (screenshot link below) and then leads to me to the Startup repair manager again - which fails again - (screenshot link also below!)
So after doing a hard drive test, it says it has failed (screenshot link also below).
So what can I do? Is there a serious hardware related issue linked with the hard drive (which is bound to cost lots of £££ I bet), or are there further steps I can take?
Screenshot links: http://1drv.ms/1jnjviU
Many thanks for your help in advance,
Max

Yes and you had to at the moment since you won't have a key unless you buy one from Microsoft for about 99 dollars.
Try you best to get the key readble I mean try to read it, good luck!
Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
**Click the White thumb if you like the answer.**
**Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

Hard Disk Error 305

Hello everyone and thank you for reading this.
So I own an HP Pavillion DV6( I believe its a dv6 6145dx) and it is NOT starting up. Windows 7 Home Edition(I believe) 64 bit.
What I mean is that it doesnt get pass the Windows loading screen after I hit "start up windows normally".
So I tried to figure out what the error was and I went into the bios and did a Hard Disk test. When I first did this it ended on the short test and said Hard Disk is Full Error 305.
I left it like that for a while(maybe 3 weeks) before I finally got around to fixing it.
To fix it I got Linux onto a disc (Ubuntu to be exact) and started my computer up through the OS on the disc. I then cleared and deleted some files (music,old games) that I didnt need anymore in hopes that it would fix the error.
So I tried to boot it up again and it got the same problem as before, it couldnt get past the Windows loading screen.
I then went back into the bios and did the Hard Disk scan again. This time it got past the short test but did NOT pass the long test. The error message I got was Hard Disk Error 305.
Ive done a bit of searching(how I found this site actually) and I cant find a fix. Is my hard drive toast? Is there any easy fix? Should I reinstall Windows?
Thanks for reading and I would really appreciate any help.
Have a nice day.

Hi,
I've replied on your earlier thread Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP DV6 Laptop - Smart Hard disk error

1. Product Name: HP Pavilion DV6-3150 us
2. Operating System - Windows 7
3. Error message: Smart Hard disk error
4. Any changes made to your system before the issue occurred:
Hi
My laptop was toooooo slow and looks like some process was running
in the background especially lots of scvhost.exe. Tried some
malware removal and couldn't resolve it.
Now I'm not able to login to my system at all.
I have tried all possible options
a. Tried to run scandisk
b. Tried to start OS in safemode prompt(It stops at classpnp.sys)
c. Tried to start OS in safemode with netword
d. Command prompt
e. Tried to execute chkdsk, scandsk etc etc.
None of the options able to solve the problem. It keeps on giving me a message"Smart hard disk error" and sometimes it runs the scandisk and it keeps on gives me a message for each segment "File record segment 12345 is unreadable"
Don't know what to do. After reading many posts in the net, suggestions were to replace the hard drive I am worried about it.
It is just 1 year and 2 months I bought the laptop and now I dont have warranty as well. Dont know what to do.
Is there any way I can resolve my hard drive?
Can you help me out to resolve it?
Regards
Bals

I have seen several people report Recovery hanging and not completing when the hdd is smaller than the original. Years ago when hdds were 20-40gb I could understand the problem with running Recovery from disks on a 20gb if the machine came with a 40gb_but I would have thought /hoped that HP would have eliminated that issue with todays huge hdds.From several posts here in the forum, the problem has not gone away.
If you install Linux now booting from Recovery Disks will wipe out Linux,so if you hope to dual-boot it will have to be reinstalled after recovering windows 7.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

GRUB Hard disk Error

Hi,
I just installed Redhat Linux AS4, after installation upon rebooting it is giving an error,
GRUB: Hard disk error.
How i can fix this issue, please help me out.
Regards

In general, if you install a system in a normal way, the installer should take care of this for you. Probably you didn't choose to install grub in the MBR? (I don't see any other reason why you would encounter this situation, but if you've installed it in another way, please inform us in this thread)
At this point grub boots as bootmanager, but isn't able to start the linux installation. Well, look at it positive: you've made progress.
Can you issue:
grub-install --root-directory=/boot /dev/cciss/c0d0

Default Boot Device Missing after opening up Yoga

I had to open up my Yoga 13 to replace the yellow power plug. After I put it back together I immediately get the following error message:
Default Boot Device Missing or Boot Failed
Insert Recovery Media and Hit any key
Then Select Boot Manager to choose a new Boot Device or to Boot Recovery Media
I assume that I somehow managed to unplug the power or connection to the SSD but I cant find any lose cables.
Please advice. Thank you.

When I click on F2 and look in the setup it says that no hard drives are detected, but I got two SSDs in the system.

HP Pavilion g4 2131tx, Hard Disk Error after Blue Screen of Death

Hello! I do not know what section shoud i post this problem, I apologize for it.
So my laptop is freezing for a days after BSOD. When I leave my laptop overnight for downloading torrents, I always receive the message "Windows has recovered from unexpected shutdown." when i woke up.
I already disabled all non-microsoft services, start up items and yet the desktop is still freezing right after the welcome screen but the welcome screen does not load too long.
The desktop freeze for more than a minute then it will go back to normal again until my laptop went to BSOD
and received this error from UEFI "Hard Disk Error." after restarting.
I ran the Hardware Diagnostic Test and I got the result:
Failure ID: RW042K-6MT6RP-MFPX1F-61BK03
Product ID: 65H69PA#UUF
I tried cleaning up registry and defragmenting disk and still no luck.
* My laptop is HP Pavilion g4 2131tx and still under warranty until June 2014.
* I am using Windows 7 Ultimate 64bit Service Pack 1
* My RAM is 4gb with a processor of Intel Core i7
* My AV is microsoft security essentials
* I am using Advanced SystemCare for cleaning up registry and defragmenting.
I was wondering if I could change my hard disk while it's still under warranty.
Thanks for your help!
#Edit: bad english >.<
This question was solved.
View Solution.

Here is the Service Manual:
Manual
See Page 39. It can take any 2.5 inch wide 9mm thick laptop SATA hard drive. They are industry standard, interchangeable.
Here is one I would recommend:
http://www.newegg.com/Product/Product.aspx?Item=9SIA2W00YW3532
This is a nice compromise with size, speed and expense. You could install an SSD for maximum speed. Post back if you need help with software or anything else.
If this is "the Answer" please click "Accept as Solution" to help others find it.

HP dv4-1225dx "Hard Disk Error" 3F1 on startup with eSATA HDD attached

The whole internet is void of information on this specific error code, so here it is, lo and behold, the ONLY English-language Google result for this error message:
Hard Disk Error
Please run the Hard Disk Test in System Diagnostics.
Error code:
Hard Disk 1 (3F1)
F2 System Diagnostics
For more information, please visit: (illegible due to colored text)
Specifically, the "Hard Disk 1 (3F1)" part, that's nowhere to be found online. Tons of pages about 3F0, apparently the primary hard disk. No, this is an error regarding the secondary hard disk, attached via eSATA.
Problem is, there's NOTHING wrong with the attached drive, other than this error on startup. No SMART failures. Comes up and works fine in Windows. Scanned 100% OK. It'd be nice if there were a way to bypass this error automatically, but I always have to hit F2, then Esc to abort its forced diagnostic routine.
It's a WD My Book Studio, 750gb, attached via eSATA. Doesn't happen if I leave it unplugged during startup... but SATA is a connection that likes to be present on startup. The system, as in the title, is a dv4-1225dx laptop, running Windows Home Server (Server 2003), but previously running Windows 7 Home Premium. Vista is evil.
It's also my home server, as of about yesterday (when I set it up and started getting this message). The system seems to crash pretty routinely over the past few days and every time it reboots, it hangs at that stupid "Hard Disk Error" message. Not a pretty sight when I'm away from home and want to access something, like my email. Is there a way around this message hanging the system?
edit: Not to mention the world's most buggy fan-control algorithm, worst heatpipe design on the planet, no AHCI mode control, and terrible system management (battery went dead on you at 40%? tough... remove battery to continue using your computer). LOOOOTS of bugs in this terrible BIOS.

Thanks for the link, it helps clarify that there's a difference between "3F1" and "301" - hard disk error and SMART error. In other words, it's reporting a generic "Error", not even that the drive may be/is failing.
In this case, the drive isn't failing, at all. It's a BIOS bug.
I put the drive on an ExpressCard eSATA controller, and it works fine. Unfortunately, since I'm the only one using this sort of configuration and getting this error, I imagine there won't be any work done to fix the bug

Should I boot from external hard disk and how do I achieve this?

I'm in a downward spiral and need advice about if booting off of an external hard disc is the right thing to do and how to go about it. How I got into this mess I'll write below. My immediate problem is that I want to be able to install a copy of osx 10.5 from the original disks that came with my computer onto a usb hard drive. Then I want to boot from that drive and install software such as disk warrior on the same external hard drive in order to repair and recover the files on my internal hard disk. Not sure if this is easy to do with the install disk that came boxed with my macbook. So is what I want to do feasible and how do I do it? Thanks.
How did I get into this mess?
For those with time to read more. A downward spiral (and my macbook was working fine)::
I have been backing up my work documents onto a 20 GB pendrive waiting to get the money to buy an nas to work with time machine for the two macbooks we have at home as a place to backup photos and video. I bought a network drive but it wouldn't work with my macbook; my time machine backup freezing at 3 gb, but works fine with wife's macbook pro.
I tried to do TM backup on a usb hard disk and got the same problem. Support forums indicated that hard disk problems could confuse TM, so although I was experiencing problem free computing I ran disk utility from internal osx. This indicated an <invalid node structure - file system verify or repair failed> at the checking catalog file stage. So I followed instructions to run disk utility and repair from the installation disk. When I ran disk utility from installation disk I get exactly the same <invalid node structure - file system verify or repair failed>. It gets worse.
After failing with install disk utility, I could not then boot from my hard disk (I had had trouble free computing up to my attempts to use TM) or eject the disk. At first attempt I had no option but to boot from dvd again as hd not offered as an option. Second attempt hd option available but fails. By reading advice given to others I managed to eject the dvd and have tried:
safe boot - it won't
boot in verbose mode and single user (indicates I have disk0s2:I/O error) and won't boot
try to use disk utility from install disk to create disk image on external hd, it won't (cites i/o error)
If I can boot from an external I will try to repair with Disk Warrior as forums indicate that this software has been able to solve <invalid node structure> issues (but am open to recommendations of other products). I also hope that I may be able to try again to burn a disk image sucessfully if this repair works. I'm still trying to save my photos and videos that aren't backed up.
I plan to try an archive and install installation but first I want to try a repair with disk warrior as I fear that archive and install won't work and I'll end up having to erase and repair my hard disk.
I feel like some perverse god is punishing me for trying to do the right thing and back up my hard disk.
Macbook 5.1 late 2008
Intel Core 2 Duo
OSX Leopard 10.5.8
85 GB of a 150GB hard disk needs backing up (saving)

I am not sure about this, but my memory is that if you try to partition the drive (in OS 10.5.8) it will erase the data.
But you can try. Go through the Add a partition steps, but watch for any warnings. If my memory is correct there will be a message to the effect that everything will be erased. If you see that, do not proceed. This page has info about how to do it, if it can be done: http://www.macworld.com/article/1164643/live_partition.html
With respect to DW on an external, I do that. I have a 80 GB external - I call it Emergency - with an OS, DW and TechTool Pro on it. (Since I have is a recovery partition built in with all new OS, Emergency would be of use only if I need to run DW or TTP.) I have never yet had to use it, but it's there. It is not usually connected - I just did that for this screen shot.

HP G62 Notebook has Smart Hard disk error

My HP G62 Notebook PC just stopped in the middle of my doing homework the other day and came up with an error code on the screen. I have went in through the BIOS and ran a hard disk test. It passes the first 2 tests and then fails on the third one.
I have tried to back it up over a month, just in case it was a virus but that doesn't seem to make a difference. Now upon start up it says the following:
"SMART Hard Disk Error
The SMART Hard disk check has detected an imminent failure. To ensure not data loss, please backup the content immediatly and run the Hard Disk Test in System Diagnostics.
Hard Disk 1 (301)"
Does this mean my computer is done? Do I need a new hard drive? I'm definetly not the most tech savvy person. I did see another board where they suggested removing the hard drive and then reinstalling it. This doesn't seem to make a difference. HELP!!

Hi,
The Smart error would indicate that the Hard Drive is failing and needs to be replaced.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know - include the full Model No. and Product No. of your G62 series notebook - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

When my computer starts up it says hard disk error g6-1b87cl

when my husband was updating my computer he turned it off n now when i turn my computer back on it says hard disk error..... i need help..... ne ways computer is a pavilion g6-1b87cl notebook pc its windows7 intel pentium inside

Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HELP!!! Boot Device Missing!! Hard Disk Error!!!

Similar Messages

Maybe you are looking for