Help.. brand new Ipod 80gb not being recognised by Computer or itunes

Replaced a ipod mini that was stolen from my house with a brand new 80gb ipod. Plugged it into the same computer that had been used successfully with the mini and the ipod will not be seen by either the computer or itunes. It will charge through the usb post no problem but when you plug it in it originally came up with the windows new hardware wizard, as apple have for some misguided reason stopped supplying CD's, the wizard can not find the correct driver, and fails to install. When Itunes is running nothing appears. I have been through the 5 R's, or should I say 4 r's as the fifth rely's on itunes recognizing the ipod before you can restore, countless time, so please unless you are sure don't ask me to click the hold button on and off yet again.
Plugged the ipod into an old laptop with USB 1.0 ports and the ipod was recognized which would suggest it is my main comp's usb ports that are at fault, but as two previous ipod mini's worked without fault I find this hard to believe. I think if only I had the correct driver to install I could solve this problem easily. Can anyone send me the correct driver for an 80gb ipod.
It hopefully goes without saying that I have downloaded the latest itunes software and gone through all the post's on the this site. I thought I'd cracked it with the UBSSORT file post but it was not to be....to tell you the truth if it's this complicated I'd rather send it back and buy a sony mp3 or even an ipod nano. At my wits end so please help Obi one, your my only hope

Big Big thank you to Varun at Apple Service & Support e-mailed me the following article and after following the instructions, I'm up and running. Thank you ......
Link: http://www.info.apple.com/kbnum/n305136
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

Similar Messages

  • Brand new iPod Touch - not recognized by my computer or iTunes

    I just purchased an iPod Touch today and it isn't showing up in My Computer or iTunes. My USB port is working because it recognizes other devises. I checked my USB port in Device Manager and it says Standard Enhanced PCI to USB Host Controller. I even uninstalled iTunes and installed it again. I'm just sick ... I have read everything I can find that might work, but nothing does.
    If anyone has a suggestion for me, I would really appreciate it.
    Martha

    Thanks, Alex. The link you gave me says that there should be a Apple device listed with my USB's and it is not. I did find the driver USBAAPL.SYS in the Windows\System32 folder\drivers. Should it be somewhere else to work??? The Mobile Device Service is there and is started. I am completely iPod ignorant, but I did have a shuffle sometime back that worked just fine.
    I appreciate your help. If you have any other advice, I would appreciate it.

  • Ipod nano not being recognised by computer, 5th gen

    my ipod is not beng recognised by my laptop as my ipod will not turn on and is charged and is also not being recgonised by any other devices such as docking stations. It will not reset for me and have tried numerous links online, please help???!!!!

    If the iPod isn't powering on and you are positive that you are using a working USB cable and plugging the iPod into a working USB port or wall adapter, it could be a sign of some hardware issue with the iPod such as a dead battery or damaged/faulty logic board.
    B-rock

  • New Ipod Touch not being recognised by itunes

    Hi, can someone please help!
    I purchased a new iPod touch (the one with the camera )the other day and yet so far iTunes nor my computer has recognized it.
    I have tried many things:
    Updating itunes
    Uninstalling and reinstalling itunes
    Unblocking itunes related software in my firewall
    Trying different USB ports
    Turning ipod off and on in different ways
    Restarting computer
    Using different usb cords
    Nothing has worked so far! My computer meets the requirements i think. Its a windows professional with a service pack 3 and it has usb 2.0 ports. I have a working itunes account and store and i have itunes version 10.1. My ipod has full charge also
    My computer makes the noise when something is plugged in, yet my ipod is not appearing under devices on itunes. My old nano is being picked up fine yet my new ipod touch isnt!
    I dont know whether i should return to the store i purchased it at or if it is a computer malfunction thats the probelm.
    Please please help! I've reached a dead end!

    Try it on another computer.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • New 3rd Gen. 4 GB iPod Shuffle not being recognized by computer or iTunes

    Hey everyone, I've read some of the other posts here on this thread about other people having problem getting their computer to recognize the new 4 GB iPod Shuffle when plugged into the USB drive, and it seems like I am having a very similar issue. I just received my iPod in the mail a few days ago and tried plugging it into the USB and got NO response whatsoever from my computer or iTunes. I am operating with Windows XP (Service Pack 3) on a Dell Inspiron Intel processor, 2 GHz with 3 GB RAM, with iTunes 8.1 (just updated). When I put something in my USB usually I hear a noise (sounds like DO-do ha) which tells me that my laptop recognizes whatever is plugged in, and usually I get a little box in the bottom right hand part of the screen that says it's been plugged in. I didn't get any of this when I plugged it in.
    When I first opened the box I turned the shuffle on and the light went green for 1 second, orange for 1 second, red for one second, then dead..I suppose this is expected since I figured it's new and needs to be charged, so I turned the shuffle off, plugged the USB into the earphone socket then into my USB, and then turned the shuffle on, and got nothing but the same sequence of lights. It's one thing if iTunes just didn't recognize the shuffle, but I checked the Device Manager and My Computer and the USB drive wasn't even listing the shuffle as being plugged in..maybe the USB cable that came with it is faulty?? I read all of the technical troubleshooting notes on here and tried the 5 R's and nothing is working at all..
    I do have one guess about this though..I also have an 80 GB iPod 5th generation that I've used for over a year now for my car and that plugs into the USB fine with its respective cable and is recognized by iTunes..my question is, can my iTunes only recognize one iPod at a time? Does it reject the shuffle because iTunes is only allowed to sync to one iPod per account? If this is true, is there a way around this so it can sync both, or can I have two iTunes accounts on the same computer? But why does the computer not even recognized it when plugged in? Hopefully it is just the cable that is damaged and not the device..wow this was long, but any advice would be greatly appreciated, thank you!

    GTEagle05 wrote:
    I do have one guess about this though..I also have an 80 GB iPod 5th generation that I've used for over a year now for my car and that plugs into the USB fine with its respective cable and is recognized by iTunes..my question is, can my iTunes only recognize one iPod at a time? Does it reject the shuffle because iTunes is only allowed to sync to one iPod per account? If this is true, is there a way around this so it can sync both, or can I have two iTunes accounts on the same computer? But why does the computer not even recognized it when plugged in? Hopefully it is just the cable that is damaged and not the device..wow this was long, but any advice would be greatly appreciated, thank you!
    According to http://support.apple.com/kb/HT1495
    iTunes for Windows does not support having multiple iPods *connected simultaneously.*

  • New Ipod Nano not being recognized by Computer

    It seems I am not the only one having this annoying issue. My new Ipod Nano (3rd Generation) will not show up at all in Itunes. I never get the setup assistant to show up either. I have tried different USB ports, shutting down and restarting the computer, reloading itunes, etc. What's next? I am new to the whole ipod thing so if I need to do something I don't know about, please let me know.

    Hi
    You're right, you're not the only person having this problem. If you don't mind though, could you just stick to bumping the other thread? I'll get you the link, one second.
    http://discussions.apple.com/thread.jspa?threadID=1307897&tstart=15
    Thanks!

  • IPod touch not being rcognized by computer or iTunes anymore.

    My iPod touch is not being recognized by my computer or iTunes anymore. I can't add new music to it and in order to charge it I have to hook it up to a different computer, other computers do recognize it, just not mine. I have tried different cables (They're not damaged either), it's not my USB ports (I have 3 USB ports, I have tried all of them, still wont recognize the iPod) because they recognize other devices and I am able to use them just fine. The port on my iPod is not damaged. HELP! I've never had an issue like this and I really don't want to have to buy a new iPod!

    Have you looked at this article:
    http://support.apple.com/kb/TS1495
    (iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)
    and/or
    http://support.apple.com/kb/TS1538
    (iPhone, iPad, or iPod is not recognized by Windows due to driver installation issues)
    The later would apply if An exclamation point appears next to the device's entry in Device Manager

  • Help please error 552 plus not being recognised by computer on 8520

    Hi
    I was wondering if anyone could help I have tried everything to fix the 552 error on my curve 8520 but nothing is working and now the phone will not connect to my laptop, I have tried apploader now it says current device is up to date, desktop software says cannot connect to device (from the start) and phone does not do anything except sit on with a white screen with "reload software 552" written on it.
    Could someone please help?  
    Solved!
    Go to Solution.

    Hi Davidemmy2
    Welcome to BlackBerry Support Forums
    As your device is not detecting you can try Application loader to force the detection of your device to load the OS ,please refer to the Knowledge Base Article :
    KB10144  : How to force the detection of the BlackBerry smartphone using Application Loader
    But remember in this process you will lose all data within your device, I hope you have your Backup.
    Additional Information : KB18751 : Error " Reload Software :552 " is displayed on the BlackBerry smartphone.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Ipod touch not being recognized by computer or itunes on PC but is on laptop

    I have an older ipod touch that is able to be recgonized on my windows 7 laptop but not on my windows XP PC.  What can I do to have the pc recognize it ipod touch?
    Thanks,
    Mike

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • IPod Touch not being recognised on newly-installed OSX Leopard (10.5.4)

    I have an iPod Touch (software version 2.0.2) which is not being recognised in OSX Leopard (version 10.5.4) which I just loaded onto the Powerbook G4. It was recognised under OSX 10.4, although the iPod Touch didn't launch iTunes when it was connected. It was only recognised after iTunes was launched.
    I have read some previous posts about iPod Touch not being recognised. One of the recommendations is to reinstall the entire iTunes package. It this must be done to sort the problem, will all of the music in iTunes be lost?
    Note my daughter's iPod, when connected, launches iTunes and is recognised.
    Help, please.

    Hi,
    Reinstalling iTunes *will not* erase your music library.
    As a matter of course I do, and in fact Apple recommend that you back up your music library, there is an option to do this under "File" in iTunes. It is really quite sensible to have your purchased and other music files saved elsewhere as well as on your main hard drive, it can save a lot of time and hassle.
    Good luck,
    Dud.
    Message was edited by: Duddo - typo

  • Ipod Touch not being recognised/unknown device

    Ipod Touch not being recognised - help!?
    It says it's a code 43 - Unknown device/device not recognised. Doesn't sound good.
    Tried all of the things the itunes website suggested such as of course turning it off and on again, restarting services, reinstalling itunes. I know from experience that when you take it in to the shop they want to charge you almost as much as you bought it for to fix a minor problem. Thanks

    Hi,
    Reinstalling iTunes *will not* erase your music library.
    As a matter of course I do, and in fact Apple recommend that you back up your music library, there is an option to do this under "File" in iTunes. It is really quite sensible to have your purchased and other music files saved elsewhere as well as on your main hard drive, it can save a lot of time and hassle.
    Good luck,
    Dud.
    Message was edited by: Duddo - typo

  • My IPOD is not being recognised by my Alpine CDE113BT Headunit

    My IPOD is not being recognised by my Alpine CDE 113BT Headunit. I have reset both my IPOD & Headunit & still not connection. I have tried one other Ipod & I Phone with no problems. An Error Message - 01 came on the display the last time it was connected. Any ideas.

    At present I have no power to the Gen 7, so need to get some power to it I think.  I pressed the buttons as you suggested, but nothing is showing up at this point.  Thank you for your response as the more I can rule out before  I take it back the better I think.

  • HT201210 I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode.  Anyone know what's going on?

    I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode.  Anyone know what's going on?

    Try and force iPod into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPod
    Note: You need to be patient and repeat the above many times to recover your iPad

  • TS1363 My new IPod is not being picked up by my computer.  What should I do?

    My new IPOD is not being picked up by my computer.  What should I do?

    @vic_suav, thanks for the additional information. Could you please try to see if this does the trick?
    Quit iTunes on your PC, switch your iPhone on and make sure it's not locked, before connecting it to your computer. Then wait a minute or two until the "Download Photos" dialogue box pops up. When that happens, launch iTunes and wait a minute or two until iPhone shows up as a connected device.
    If the above doesn't work, follow the steps in 'How to restart the Apple Mobile Device Service (AMDS) on Windows' to restart the Apple Mobile Device Service, here: http://support.apple.com/kb/TS1567
    Otherwise, please try a different USB port on your PC. Then in your Windows 7, click Start and choose Control Panel. Click "Uninstall a program". Then verify that Apple Mobile Device Support is visible in the list of currently installed programs. If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. For removing and reinstalling iTunes, QuickTime, and other software components for Windows Windows 7, follow these steps: http://support.apple.com/kb/HT1923
    if all of the above fail, you can try some of the troubleshooting steps outlined in 'iOS Device not recognized in iTunes for Windows' article: http://support.apple.com/kb/TS1538
    Let me know how it goes. Good luck!

  • Ipod has stopped being recognised by windows or itunes. tried everything

    hi
    My ipod 30gb video is no longer being recognised.
    symptoms:
    I plug ipod into the usb cradle
    drive appears in 'my computer'
    itunes 7.2 loads automatically
    ipod has usual 'do not..' message
    ipod screen then brightens with same 'do not..' message then goes back to menu on ipod
    drive dissapears from 'my computer'
    nothing updates and itunes diagnostics say connection has failed. all usb hubs reported in diagnostics are ok.
    I have tried:
    1. resetting ipod
    2. windows /manage/settings/ipod checks
    3. system restore
    4. driver removal of ipod
    5. firmware update removal in itunes directory
    6. ipod lead instead of cradle and other USB ports
    6. everything else suggested on the help and support centre
    the ipod works fine and I can see/hear all music and video on it and the itunes library matches the ipod
    device manager sees the USB device as (0)ipod and says it is working fine
    but the ipod is not being recognised??????
    HELP!!!! please
    thanks
    Mat
    athlon 2200/gigabyte mobo/1gb men   Windows XP   Apple docking station with IR for ipod

    Thanks! But I actually figured it out! Right after I said something about the driver, I went into device mangager. Sure enough even though it did not show up as a drive letter the device manager said is was installed and working.
    So I deleted the device out of device manager. Restarted and plugged it in. Although I go some weird error. It found the IPOD and now Itunes sees it.
    I believe that killing the process would have done the same thing as you stated.
    Thanks to all for taking the time to answer these issues. It beats the apple store or tech support.

Maybe you are looking for

  • How do I create a variable video delay of a live stream...

    I have a live video feed from my webcam in my Flash Application. I have a second video window next to it that I want to place a variable delayed video of the live stream. Therefore, I need to save the video stream in memory/disk and create this varia

  • Cl_alv_table_create= create_dynamic_table

    Hi, When I use this method it is dumping CALL METHOD cl_alv_table_create=>create_dynamic_table     EXPORTING       it_fieldcatalog = it_fieldcat     IMPORTING       ep_table        = <new_table>. The error What I am getting is "LOAD_PROGRAM_NOT_FOUND

  • Disp+wp.exe is in yellow colour saying starting the process ?

    Hi Guys, My disp+wp is yellow in colour and saying starting the process but not coming to green active state. I found this in dev_disp Fri Oct 17 08:22:03 2008 J2EE server info   start = TRUE   state = STARTED   pid = 2332   argv[0] = E:\usr\sap\PN5\

  • Touch events conundrum/problem

    I've been using Flash CS5.5 targeting the IOS platform (iPad). I have been writing a small application that relies on things being  dragged around - can't really say much more right now. I need to know when dragging starts, so on the thing that's bei

  • Lost library on computer how do i get it of ipod touch

    help