Help!! cal event created and emailed not posting to ical
i create a calendar event in outlook at the office and invite my personal email address and then when i look at my ical the event does not show up.. i have the option set so this should happen automatically but it doesn't....please any help would be appreciated, thanks.
not sure what you mean????
if i receive and invite from someone (or send to myself for that matter) the event should be automatically posted to my calendar without any action on my part.
this is what happens when an event is sent to a gmail account (the event is automatically posted on the calendar)
Similar Messages
-
Events created on iPhone not syncing to iCal when I bought new Leopard iMac
that pretty much says it all... i had a powerbook g4 and no problem syncing. bought new iMac with Leopard. just noticed that events created on iPhone not showing up on iCal. Ideas?
Ok, this will work.
1. Turn off .Mac Sync in System Preferences.
2. Open iCal and back up your calendar. File>Back up iCal. +(Just to be safe.)+
2. In iCal, export all your calendars as file(s). File>Export. +(Note: You can safe these to folders that are in a similar order to the calendar groups that you might have for ease in importing them back in later.)+
3. Delete all your calendars from iCal. +(Note: You will need to create a new "temp" calendar as iCal requires at least one calendar. *Also, it is very important to save the URL's of the calendars that you subscribe to for later importing.*)+
4. Import the calendars you just exported. +(Note: First add a new calendar to iCal and use the same name as the calendar that you are importing. All the data from your exported calendar will be added to your new calendar.)+
5. Open iTunes sync with iPhone, telling iTunes to reload all the info on my iPhone +(pertaining to iCal)+ INFO Tab>Replace information on this iPhone>check Calendar.
It's a pain and takes a while if you have a number of calendars, but it will work.
Good luck! -
Events created on iPhone not added to iCal
The events I've created on my iPhone to not get added to iCal when I sync via iTunes. I've tried "sync all calendars" as well as syncing selected calendars.
Does anyone have any idea what I might be doing wrong? I have a feeling it's really obvious and I'm just not seeing it...I have a solution that ACTUALLY works:
Make sure your iPhone is displayed in iTunes.
Select your iPhone and then select the Info tab.
UNCHECK Sync Address Book contacts, and then recheck.
UNCHECK Sync iCal contacts, and then recheck.
Sync your iPhone.
You'll be prompted to accept both Address Book and iCal changes and the sync will work!
From that point on all you have to do is sync normally and it'll transfer both Address Book contacts and iCal events BOTH ways!
Thank you to the fabulous Apple Tech representative who helped figure out this solution!!! -
Calendar event created on iphone not showing in ical.
I have a 4S and when I create a calendar event in ical, it does not show up in my ical ofn my Macbook Pro.
I have check sync calendars in iTunes and have selected to display all calendars in my Macbook's iCal.
Is ther some thing I am overlooking, or a step I may be forgetting?
ThanksAfter a trip to the genius bar, I found how to solve this problem, at least for me:
0) Plug in iPhone
1) Start iCal
2) Export all calendars (File -> Export)
3) Quit iCal
4) Delete all calendars from ~/Library/Calendars
5) Start iCal
6) Import all exported calendars
7) Start iTunes, configure syncing to overwrite calendars on phone
8) Sync iPhone -
IPS event monitor and reports not working
Dear after upgrading my IPS from E3 to E4 the event monitor and reports not working, can you please advice my to solve this issues
Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4 Feb 14 2014 15:33:22 39715 514 IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
hostId: SSM02
appName: sensorApp
appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature: description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
subsigId: 0
sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
attacker:
addr: 172.x.x.x locality=OUT
port: 39715
target:
addr: x.x.x.x locality=OUT
port: 514
os: idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz -
How to create and share notes in icalendar
how to create and share notes in icalendar
i have created a reoccuring all day event for monday thru friday throughout the month.
Each day I write notes in the event. I do not want the notes to duplicate each day.
Now do I set up so notes for that day is only in that day.
thank you
angelscott1Hi Parga,
You need to declare the variable at Interface controller and need to map this at the context level.
Like a variable declared at web dynpro component context level can be used among all views.
every web dynpro component have an Interface component. this can be used in other components where this perticular component is used it is also have a Context.
For more info Take Usage of Component Controller Examples.
[Check this thead|http://help.sap.com/saphelp_nw70/helpdata/en/3a/165da11551994db913f56829f8f3f1/frameset.htm]MPUSAGE
WDR_TEST_CMPUSAGE_CI1
WDR_TEST_CMPUSAGE_CI2
WDR_TEST_CMPUSAGE1
WDR_TEST_CMPUSAGE2
WDR_TEST_CMPUSAGE3
WDR_TEST_CMPUSAGE4
WDR_TEST_CMPUSAGE5
WDR_TEST_REF_CMP_USAGE_CI
WDR_TEST_USAGE_GROUPS_CI
WDT_COMPONENTDETAIL
WDT_COMPONENTUSAGECheerz
Ram -
My daughters ipod touch has been disabled because of a wrong passcode. After 2 days of trying to get into Itunes, it will not help without a passcode and is not recognizing it as a device even though the computer is recognizing the USB. I know I have to do a complete recovery, but can I do this without Itunes (or Icloud)?
You cannot do this without itunes on your computer
-
Internet and email not working. PLEASE help.
So I've had my blackberry for a couple of moths and everything's been fine.
Yesterday I stopped receiving emails on my blackberry and I also noticed that my internet wasn't working anymore. It came up with the message 'unable to connec to the internet, please try again later' even though I'm at home and my phone is connected to my WiFi.
I've looked around the internet for help and tried a hard reset a couple of times, which didn't help anything. I then tried deleting my service book and did the whole Host Routing Table registration again, and I got the blackberry registration email, however I'm still not getting emails.
Alot of the help online suggests going to Email Settings and Setting up my email account again, but seeing as my internet isn't working it comes up with an error message 'your device had a problem connecting to the server' when I try to launch the Email setup.
I saw that you could set up your email from your computer but when I tried to do this it didn't have my wireless service provider, BT, listed as an option.
This is really really urgent as I really don't know what the problem is and why it's suddenly occurred and what I'm meant to do! Any help would be MASSIVELY appreciated! thank youafter loading new a new operating system, you may need to self install BBM and Appworld.
Using your BlackBerry browser, navigate to these URLs to install either.
www.blackberry.com/appworld
www.blackberry.com/messenger
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
So a week or so after the newest update came out for the iPod touch 4 (IOS 5.1.1) my safari stoped working along with YouTube and email. When I tap on the safari app, it shows the search bar and just a blank open page from anywhere from less then a second to ten seconds then it suddenly crashes. This happens every time I try to open safari. What Happens with YouTube: I open YouTube and it will let me serch for a video to watch then when I click on a video to watch it just says it is loading and won't stop. If tested it and it will keep loading and won't stop. What happens with message and email: basically they just won't load any new messages and won't let me send any either. Every other application that runs off wifi works just not those four. I've been connected to wifi and it won't work. If went to other wifi and it won't work. I've tried everything and it still won't work. Please help me! I really need it! :)
Try the standard fixes:
- Reset. Nothing was lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod. -
Syncing Events Created with iPhone Not an Option?
Okay, I've read as many discussion threads as my eyes can handle and have tried several solutions suggested to no avail. I am using Windows Vista and Outlook 2007 but was very recently using Windows XP Pro and Outlook 2003. The same problem applies to both environments.
While I've had no problem syncing contacts and calendars from my computer to the iPhone, I cannot go the other direction. The selection box beside the phrases "Put new events (or contacts) created on this iPhone into the group (or calendar)," which is then followed but what should be a drop down menu, appears gray and is unselectable. I figured it was some simple preference setting in either Outlook or the iPhone that was causing the problem and found my way to the discussions to seek the remedy. Once here, I find myself overwhelmed and wondering if I now need a computer engineering degree to prevent missed appointments or the need for double entry. Please help a poor, technically challenged individual not regret the decision to by this phone!!I'm guessing that perhaps the reason the option to "Put new Contacts/Events created on iPhone" is not available is that I only have one calendar/group (Outlook) available on my computer. That is also why it defaults to "All Contacts" and "All Calendars"
Evidently the actual syncing from the iPhone to the computer is unrelated to the availability of these options. At least that appears to be true in my case. I was actually able to get mine to work using the information in the article posted by someone else and available at
http://docs.info.apple.com/article.html?artnum=305845
It seems the step regarding "Removing all other Third Party Add Ins" did the trick. I just didn't think it worked initially since the options on the Info tab did not change.
Hope that helps! Thanks to all for the input. B -
Video's are missing from facebook album under photo's. It shows that I have 99 and only shows 24. These are not copyright problems. I have had them up for years. Now, I can not post any video's too. Message says that content is currently unavailable. It seemed to happen after I upgraded to 10.7.5 but it could be coincidental. Of course, I have not got any email from facebook to help with this problem and I am really frustrated that I can not find my video's and post any new ones anymore. Any help would be appreciated.
I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
Still hoping someone out there can help me.
thanks,
anne -
Browser and email not available
i have just received a blackberry 8800 v4.5.0.187 platform 2.7.0.109 and put in a talktalk sim which i believe is vodafone. the browser icon after fitting the sim shows up as vodafone live but when i click on it it remains in a state of requesting. I have a strong signal and have no trouble with calls and texts. Also when i tried to set up the email it asks if i want a work email or skip. I clicked the work one and it asks for a blackberry enterprise server password. Do i request this from taltalk or blackberry? and will my browser work if /when i get this password? Someone please help or i have wasted time and money on a not so smart phone..
Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
You must, in order to get the RIM push email functions you are looking for, as well as additional BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
hi all, woke up monday morning and my bbm and emails have stopped sending and recieving i have a data plan active and wifi on and still nothing. thought i would leave it a couple of days and see if it started working again but still not working. does anyone know what i should do? thanks
Hi kaydee92 and welcome to the BlackBerry Support Community Forums!
Have you contacted your wireless provider to ensure there are no problems with your data plan? From the home screen, what does your network indicator show in the upper right corner? Is it in UPPER CASE or lower case?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Create user - email not being received
Sorry if it has been posted before but I've googled and searched this forum but haven't found the solution or understood the solution if I did in fact find it.
I'm trying to learn APEX at home and I am not a DBA!
I have Oracle 10g installed on my PC. After I finally got APEX 3.1 up and running, what a palaver that was, I have started to follow the 2DayPlus guide to give myself a grounding in the tool.
The first snag I have hit is I cannot see any emails that I assume the tool sends when you set up a user. This isn't a showstopper but it would be nice to see work as at some point I'll probably want to see if I can make an application send an email.
Assuming this is all GUI work, what type of user do I need to log on as and what screens do I need to navigate through to let Apex know the email details? If it is not GUI based then what do I need to do.
So far I have two entry points into APEX.
http://localhost:7777/pls/apex
and
http://localhost:7777/pls/apex/apex_admin - this gives me administration servicesThanks for that. I had actually found that page and filled it in. However I made a few mistakes.
First I hadn't filled in the SMTP name.
I also missed a letter from the outgoing email address.
It never even crossed my mind to think about providing the password for my ISP email account.
I only twigged this when I did a bit more searching on here and came across Axigen.
I've had a go at installing that without success.
The thing that is confusing me is I have created a number of developer users and that email queue is empty. I'd have thought that incorrect details would see that queue to fill up so I'm not convinced that the fundamentals are correct. I'm hoping that rubbish data isn't simply dumped in a black hole if APEX doesn't know where to send it.
I'm going to forget about the email for the time being and try and see if I can get an application up and running.
I don' seem to have much luck with emaiing from Oracle. Internal politics at my last contract over who could access what directory turned a relatively simple email call at the completion of a report into a complete and utter nightmare. I think me and email will forever lock horns !!! -
HELP -- mail account created and spamming
Hello
I was informed my mail service is spamming
I figured out it is coming from an account that I did not create.
I rebuild the imap and it recrates the account.
Is there a way to delete the acocunts so the SMTP server does not keep sending spam
??You haven't posted up enough of the log to determine what is going on, possibly which account is sending the email. Post up the entire transaction from the point an account logs in to send the message to the point when the client disconnects from the server. Make sure your 'SMTP log detail level:' is set to 'Information' so you get enough detail about complete mail transaction.
Look for an entry that looks similar to this (the authentication method may be different) just before what you posted.
Jul 28 17:13:06 mailserver postfix/smtpd[26831]: 32AB51B470F: client=cpe000f3d3b19d5-cm0011ae908964.domain.com[123.456.789.159], sasl_method=CRAM-MD5, sasl_username=johndoe
Jul 28 17:13:06 server postfix/cleanup[26814]: 32AB51B470F: message-id=<[email protected]>
Jul 28 17:13:06 server postfix/qmgr[5443]: 32AB51B470F: from=<[email protected]>, size=12139, nrcpt=2 (queue active)
All the way to
Jul 28 17:13:34 server postfix/qmgr[5443]: 1BF831B4733: removed
Jul 28 17:13:53 server postfix/smtpd[26813]: disconnect from unknown[251.654.987.753]
Jul 28 17:14:06 server postfix/smtpd[26831]: disconnect from cpe000f3d3b19d5-cm0011ae908964.domain.com[123.456.789.159]
This way we might be able to determine if and which account was compromised or which IP address the attacker is connecting from. The return address is obviously forged, that's why it's bouncing back to that non-existant account.
If an account wasn't compromised, the log will show that as well, then Jeff is correct, the server itself may have been compromised with a script or web site vulnerability.
Also, if I try and access 'http://marinergraphics.com/info.php' I get an error and a reference to 'Powered By Biosonik Formmail V1' which has a dead link to 'http://design.biosonik.com/'. What's that about. Biosonik Formmail is a script for an email form. Are you sure it hasn't been compromised?
Maybe you are looking for
-
How can we change CS5 from one PC to an other PC? How to move CS5 to an other PC?
We have CS5 on a PC with Windows 7. Now wet want o change to an other PC with Windows 8. How to make it. I work for a company, but I don't know how to change the Program from one to an other PC. Is it possible? Moving from one to the other PC?
-
About Surrogate Key and Dimension Key on OWB 10.2
Hi, everyone. I am using OWB 10.2 and I have a question about Surrogate key and Dimension Key. I indicated the foreign key as VARCHAR2 type in Fact Table and Dimension Key as VARCHAR2 type is operated as Primary key in Dimension Table. I made Single
-
Error creating a connection pool (No suitable driver)
I have just installed WLS6.1 SP3 I try to create a connection with the following parameters URL = jdbc:oracle:thin@myOracleServer:1521:myOracleSID DriverName = oracle.jdbc.driver.OracleDriver every thing else is left as the defaults, when I click cre
-
What kind of technology does the internal microphone use?
Does the internal mic use USB, Bluetooth, or analog technology. (Rosetta Stone voice recorder/analyzer is crashing app)
-
Hi I just wanted to know can i have one Physical and One Logical Standby for a Single Primary Database. Is there any precautions and steps to be followed . Thanks