HELP!! Can anyone tell me what causes this problem?
I will paste a link below to a screen grab I took of my desktop. I've never seen this before. Could you please tell me what this could be? The best way I could describe it is to describe it as warping effect on various windows.
This has occurred when using photoshop, after effect, illustrator, the OS. Basically I've seen it occur on just about every type of browse window viewable on the Mac.
I reformatted the mac and it still occurs.
I am using a MacPro 2 x 3 GHz Quad Core with 16 GB of RAM, and an NVIDIA Quadro FX 4500. I have an internal 750 GB HD for the OS and 4x750 GB internal RAID for storage. (I do a lot of video work.)
Here's the link:
http://i87.photobucket.com/albums/k142/semilion/02-7.jpg
Thanks,
Daniel
PS> Even if you have no clue what this is, can you please let me know if you have seen it before or not?? I am completely lost. Help me Obi Wan Kenobi... you're my only hope.
Afraid I haven't seen that before. The only thing I could suggest is to boot from the 1st Install disk and run the hardware test. I would wonder about the video card. You might also post in the MacPro forum. I just got MY MacPro today, and the MacPro Forum is where I would go:
http://discussions.apple.com/category.jspa?categoryID=194
The only other thing I can think of is to launch Console from the Utilities folder and see if any errors are being reported.
Francine
Francine
Schwieder
Similar Messages
-
HELP!! Can anyone tell me what causes this problem? UPDATED!!
I will paste a link below to a screen grab I took of my desktop. I've never seen this before. Could you please tell me what this could be? The best way I could describe it is to describe it as warping effect on various windows.
This has occurred when using photoshop, after effect, illustrator, the OS. Basically I've seen it occur on just about every type of browse window viewable on the Mac.
I reformatted the mac and it still occurs.
I am using a MacPro 2 x 3 GHz Quad Core with 16 GB of RAM, and an NVIDIA Quadro FX 4500. I have an internal 750 GB HD for the OS and 4x750 GB internal RAID for storage. (I do a lot of video work.)
Here's the link:
http://i87.photobucket.com/albums/k142/semilion/Picture-2.jpg
Thanks,
Daniel
PS> Even if you have no clue what this is, can you please let me know if you have seen it before or not?? I am completely lost. Help me Obi Wan Kenobi... you're my only hope.Afraid I haven't seen that before. The only thing I could suggest is to boot from the 1st Install disk and run the hardware test. I would wonder about the video card. You might also post in the MacPro forum. I just got MY MacPro today, and the MacPro Forum is where I would go:
http://discussions.apple.com/category.jspa?categoryID=194
The only other thing I can think of is to launch Console from the Utilities folder and see if any errors are being reported.
Francine
Francine
Schwieder -
Kernel panic. Can anyone tell me what caused it?
My Macbook Pro has been having a lot of kernel panics recently, especially when I try to shut it down: It restarts before it can go off.
Can anyone pinpoint the hardware or software responsible? Here is the error report from the last one:
Anonymous UUID: 5FBADF08-3C68-9E27-E8BD-D3472494127F
Wed Apr 29 23:42:13 2015
*** Panic Report ***
panic(cpu 2 caller 0xffffff802a617cc2): Kernel trap at 0xffffff802a5361e0, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000010a749000, CR3: 0x000000002b7d7002, CR4: 0x00000000001626e0
RAX: 0x0000000000000000, RBX: 0xc0ffee845f428944, RCX: 0xffffff8034a726a0, RDX: 0x0000000000001000
RSP: 0xffffff80c6ddb580, RBP: 0xffffff80c6ddb5a0, RSI: 0x0000000000000003, RDI: 0xc0ffee845f428944
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x0000000003a6c000, R11: 0x00007fff7f003000
R12: 0xffffff8036a72ad0, R13: 0xffffff8037152400, R14: 0x0000000000000004, R15: 0x0000000000000003
RFL: 0x0000000000010206, RIP: 0xffffff802a5361e0, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000010a749000, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80bd59de10 : 0xffffff802a52bda1
0xffffff80bd59de90 : 0xffffff802a617cc2
0xffffff80bd59e050 : 0xffffff802a634b73
0xffffff80bd59e070 : 0xffffff802a5361e0
0xffffff80c6ddb5a0 : 0xffffff802a5ffbb4
0xffffff80c6ddb660 : 0xffffff802a601fe7
0xffffff80c6ddb680 : 0xffffff802a591918
0xffffff80c6ddb6c0 : 0xffffff802a5928e3
0xffffff80c6ddbae0 : 0xffffff802a591ae5
0xffffff80c6ddbb40 : 0xffffff802a9fdb4e
0xffffff80c6ddbb70 : 0xffffff802a747659
0xffffff80c6ddbbf0 : 0xffffff802a74728a
0xffffff80c6ddbc40 : 0xffffff802a741905
0xffffff80c6ddbcb0 : 0xffffff802a74c7ca
0xffffff80c6ddbd50 : 0xffffff802a748113
0xffffff80c6ddbd80 : 0xffffff802a742e24
0xffffff80c6ddbdf0 : 0xffffff802a9d5f5e
0xffffff80c6ddbec0 : 0xffffff802a9e7069
0xffffff80c6ddbf50 : 0xffffff802aa4ba86
0xffffff80c6ddbfb0 : 0xffffff802a635376
BSD process name corresponding to current thread: launchd
Mac OS version:
14D136
Kernel version:
Darwin Kernel Version 14.3.0: Mon Mar 23 11:59:05 PDT 2015; root:xnu-2782.20.48~5/RELEASE_X86_64
Kernel UUID: 4B3A11F4-77AA-3D27-A22D-81A1BC5B504D
Kernel slide: 0x000000002a200000
Kernel text base: 0xffffff802a400000
__HIB text base: 0xffffff802a300000
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 48704724760399
last loaded kext at 45991772019539: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7facd73000, size 20480)
last unloaded kext at 46103581099429: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7facd73000, size 16384)
loaded kexts:
com.apple.nke.pppoe 1.9
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AGPM 110.19.5
com.apple.driver.X86PlatformShim 1.0.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.4f4
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 272.18
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMikeyDriver 272.18
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleIntelHD4000Graphics 10.0.6
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleHV 1
com.apple.driver.AppleBacklight 170.7.4
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.7d0
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.4f4
com.apple.driver.AppleIntelFramebufferCapri 10.0.6
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 327.5
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 36
com.apple.iokit.SCSITaskUserClient 3.7.5
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.1
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.AirPort.Brcm4360 930.37.3
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AppleAHCIPort 3.1.2
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 710.4.11
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.nke.ppp 1.9
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 272.18
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOSurface 97.4
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.AppleHDAController 272.18
com.apple.iokit.IOHDAFamily 272.18
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.9.1d7
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.4f4
com.apple.iokit.IOBluetoothFamily 4.3.4f4
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOAcceleratorFamily2 156.14
com.apple.AppleGraphicsDeviceControl 3.10.22
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471.20.7
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.2
com.apple.iokit.IO80211Family 730.60
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOUSBFamily 720.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro9,2, BootROM MBP91.00D3.B09, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f44
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333235533643465238432D50422020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333235533643465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.15.166.24.3)
Bluetooth: Version 4.3.4f4 15601, 3 services, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS545050A7E362, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-8A8, 687.2 MB
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: USB Optical Mouse
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1Most likely, com.intego.kext.VirusBarrier.
See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details. -
Can anyone tell me what is this and how to convert it?
PK s Ë<^Æ2 ' ' mimetypeapplication/vnd.oasis.opendocument.textPK s Ë< Configurations2/statusbar/PK p Ë< ' Configurations2/accelerator/current.xml PK s Ë< Configurations2/floater/PK s Ë< Configurations2/popupmenu/PK s Ë< Configurations2/progressbar/PK s Ë< Configurations2/menubar/PK s Ë< Configurations2/toolbar/PK s Ë< Configurations2/images/Bitmaps/PK s Ë< layout-cachecd`d(ðe`` àd``á„1 ` C ÆP†14aŒ # È PK # /V& Q PK s Ë< content.xmlÝ][sÛȱ~?¿b¬T'Š²ì½*Y¹d›¶¸‘,•¤]gŸRCbH" Šæ>凜óçòKNÝ= € ‰Šå*ïIUÖ 0מ¾|} è/¯>M3sçJŸ ùO{‡Ýç{ÆåÃ"IóñO{¿Ü¼ÛÿaïÕñý¥ Ò¡;JŠá|êòjXä ýk¨wîäíO{ó2?*¬OýQn§Î UãbæòÐë¨Ùúˆç’'¾Zf;wçÆÍÞ•ûTíÚ m[}í`÷™¹q³wRÚÅ®Ñ–ˆÚì>*víüÉgû£‚¨>Ù*]Yŧ,ÍoÚ›TÕìèà`±Xt /»E9>8üñÇ øm\ð0¶›ÍËŒ[%à —9Læ »‡ ¡íÔUv×õ¡msIù|:påΤ±•];U7Þ™#îÆ[H3œØrgÞàÆíã}™ì~¼/“fß©&[Î䇃szÉÿ9?«y¡œî: Ú¶H5,ÓÙÎÛ”ÖÍþEQÄ¥¢ƒ (/÷Åóçß ÈïÖ‹{›/Ê´re£ùðÞæC› #Å‹é&¢Q»Ã j±ïîÀ¦‘ñA ¿¥Ã‹ y ûdëÐ;?» NÜÔ֍Ӈ 粒¯l^S¦Ä!lÝé· ¥› e 3Ú]aÒi½ˆk›TÓl»¸ãmh:.“dcSZÎË } ¼ý»Ô-þ Ù0uYàù¸ ]œû4seŠu٠Ǻ?õD :êbvÔè-œ¥= –…6Àë9ªJ›{œ É+^éòhÓ¾ËÄØÇÔ¼N …Ô ¦Ïªƒ" ½(“Q—~Ù; FI Ú Ä #2Nû#;tû‰ fþø/¢\âc#¿cW?íÝØI1µ‡{†´Hh2M³ex³wð@¢ˆ7 ÜÂ\Që|Ã8ÿmg…ÿóJ;y¸gZC£ýþØåDf’™RÇ«[ÌÒjHZåΖ)LÑCK;¡fÙ† …çÛ§ö‹ÔûÏ™ú:^Ï7 #¾¸gò¥¯ÜôsfדÛz¤Ÿ?ûÁ6VÓçv^ àïá> yÿÛZëåaœK 9³¥ —v6 /è 0 ÿ²¯ô%Å“Ø2Ù ÇNû3’GWV)qÛ¨`À³o³tL‚6t9+féñ¹¯ÒÑrß *¡q EI‚?²™— 6Ö{Ïâ_|•‹—6Ü»= —O§E¼øfFª8<[¸t
¬ ‡Iº˜áž u9„¤‹d‰Ãf<á-Ã1X– p°²aR +µ1hN¨mN o³¥'–@É(,·¡C Ùšº@¸S»Lœë ‚ ¡AÒ’°)K? ë¢P©dòThank you for your answer.
I moved my notepads to a USB and when I opened the notepad I got this strange
characters. Since you said it is a zip file I downloaded and unzip software but it
can't open it . This is a note pad. I don't know what I did wrong when
I passed it to the USB that when I transfered it to the pc it came out like that.
Anything I can do to get my text back? -
Can Anyone Tell Us What CPU This Blade Log Has? (SPARC T3-1B) - PLEASE
Primary Bootstrap.
U-Boot 1.1.4
Custom AST2100 U-Boot 3.0 (Feb 4 2011 - 00:21:51) r62572
DRAM: 119 MB
Flash bank 0 at 10000000 has 32MB in 256 sectors (chipSize 1<<25, ratio 1, bufSz 64).
Flash: 32 MB
VUART1 at port 0x03f8, SerIRQ[4] disabled
VUART2 at port 0x02f8, SerIRQ[3] disabled
Protecting U-Boot flash sectors; monitor_base=100a0000.
board_findGpioNum(): ERROR, 'BIOS_TOP_BLOCK_LOCK' does not match any pin.
board_findGpioNum(): ERROR, 'SP_PECI_ENABLE' does not match any pin.
H/W: Virgoplus Service Processor; SOC: AST2100 Rev. 02 ('A3')
PWC_SP_Broken_OD = 0; ARM restart caused by: power-on
The host is OFF(held) (hostWantsPwr=1, powerGood=0,
allowPwrOn=0|0, outOfReset=0, fatalError=0).
Reset straps=0x8c819180, def. H-PLL=264 MHz, CPU/AHB=2:1, boot CS0# normal speed
PCI w/VGA noVBIOS; NOR 38ns/byte; DRAM clock is M-PLL: 264 MHz (DDR2-528)
DRAM: 128MB data - 8MB VGA, 32-bit noECC, 2 BA 10 CA, CL=4 BL=4 ap=1, 61440 us refr, DQSipv=0x2020202
Board Revision - 8d
Date: 2013-11-05 (Tuesday) Time: 16:15:08
Reading FRUID...Valid CRC.
ethaddr=00:21:28:BB:FD:76
eth1addr=00:21:28:BB:FD:77
Platform (virgo): Configuring HPC FPGA (data=0x100ed800, len=45844)
## Extracting HPC microcode...done
Now programming 225844 bytes...
HPC programming done, rc = 0
HPC_FPGA_DONE = 1
Net: faradaynic#0, faradaynic#1
Enter Diagnostics Mode ['q'uick/'n'ormal(default)/e'x'tended(manufacturing mode)] ..... 0
Diagnostics Mode - NORMAL
<DIAGS> Memory Data Bus Test ... PASSED
<DIAGS> Memory Address Bus Test ... PASSED
I2C Probe Test - Motherboard
Bus Device Address Result
=== ============================ ======= ======
1 PCA9548 MUX (U3004) 0xE2 PASSED
2 Sys FRUID (U3003) 0xA0 PASSED
2 Power CPLD (U3301) 0x4E PASSED
2 CPU0 Fault LED's (U3001) 0x40 PASSED
2 CPU1 Fault LED's (U3002) 0x42 PASSED
2 PCA9555 (Misc) (U3005) 0x44 PASSED
2 Temp. Sensor(LM75) (U3006) 0x90 PASSED
2 LTC4215 (U5102) 0x96 PASSED
2 DIMM IMAX (U3102) 0x12 PASSED
6 Bank Panel Led's (U3406) 0xC6 PASSED
6 DS1338(RTC) ( U803) 0xD0 PASSED
<DIAGS>Testing 4eyes access .... PASSED
<DIAGS> PHY #0 R/W Test ... PASSED
<DIAGS> PHY #0 Link Status ... PASSED
<DIAGS> ETHERNET PHY #0, Internal Loopback Test ... PASSED <DIAGS> USB 1.1 Test ... PASSED
<DIAGS>Access to BIOS Flash ... PASSED
<DIAGS> Testing PowerCPLD version ... PASSED
checking for abnormal reboots: 0:0.
abnormal reboot found -- too long, ignore
Booting linux in 3 seconds...
Un-Protect Flash Bank # 1
flctrl: Recovery U-Boot (r56177) at 0x10040000 is valid (min. r51654).
Trying primary image...
Trying to boot package at 10100000
Found kernel image at 10102000
Found root image at 1025f9f4
copying 0x00a8d040 bytes from 0x1025f9f4 to 0x00800000
bootargs= root=/dev/ram ramdisk_size=10804 console=ttyS0,9600 bigphysarea=6144 ractrends.mtdblocks=env,0x20000,0x20000,coredump,0x1500000,0x800000,persist,0x1d00000,0x200000,params,0x1f00000,0x100000,
## Booting image at 10102000 ...
Image Name: Linux-2.6.27.43
Created: 2011-02-04 5:18:45 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1431988 Bytes = 1.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
do_bootm_linux() armlinux.c:104
bootm
0x10102000
0x00800000
theKernel=00008000
do_bootm_linux() armlinux.c:121 - 9
## Loading Ramdisk Image at 00800000 ...
do_bootm_linux() armlinux.c:155 - 10
Image Name:
Created: 2011-02-04 6:07:05 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 11063296 Bytes = 10.6 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
do_bootm_linux() armlinux.c:182 - 11
do_bootm_linux() armlinux.c:245 - 15
arch_number = 0x00000386
env_t = 0x01ED0008
boot_params = 0x40000100
DRAM bank = 0x00000000
-> start = 0x00000000
-> size = 0x07700000
ethaddr = 00:21:28:BB:FD:76
eth1addr = 00:21:28:BB:FD:77
ip_addr = 0.0.0.0
baudrate = 9600 bps
Sun extensions:
bi_UBootEnvAddr = 0x10020000
bi_UBootEnvSize = 0x00020000
bi_flashstart = 0x10000000
bi_flashsize = 0x02000000
bi_flashbanksize = 0x02000000
bi_flashbanks = 0x01
bi_flashbankwidth = 0x01
bi_flashsectorsize = 0x00020000
bi_flashsectorcount = 0x00000100
bi_boottype = 0x02
bi_primarytype = 0x02
bi_secondarytype = 0x00
bi_booted = 0x10100000
bi_primary = 0x100a0000
bi_secondary = 0xffffffff
bi_primaryhdr = 0x10100000
bi_secondaryhdr = 0xffffffff
bi_imagearea0 = 0x100a0000
bi_imagearea1 = 0xffffffff
bi_maximagesize = 0x01f60000
bi_min_firmware_rev = 0
bi_sptrace_base = 0x00000000
bi_sptrace_len = 0x00000000
bi_apbclockhz = 0x03ef1480
H/W: Virgoplus Service Processor; SOC: AST2100 Rev. 02 ('A3')
The host is OFF(held) (hostWantsPwr=1, powerGood=0,
allowPwrOn=0|0, outOfReset=0, fatalError=0).
ARM Control reg: RR=0 HV=0 IC=1 BPd=0 RomP=0 SysP=0 BE=0 WB=1 DC=0 AlinFlt=1 MMU=0
Cache Type reg: CType=0xe WB, sep.; I: 16KB of 32B lines 4-way; D: 16KB of 32B lines 4-way
IC locked ways(3:0): 0000b, DC locked ways: 0000b
Reset straps=0x8c819180, def. H-PLL=264 MHz, CPU/AHB=2:1, boot CS0# normal speed
H-PLL (params=0x04291) 264.000 MHz, M-PLL params=0x04120-->264.000 MHz
CPUCLK: H-PLL/1=264 MHz, AHB HCLK: CPUCLK/2=132 MHz, APB PCLK: H-PLL/4= 66 MHz
PCI w/VGA noVBIOS; NOR 38ns/byte; DRAM clock is M-PLL: 264 MHz (DDR2-528)
Bus-master-mode clocks: PCI BHCLK= 33 MHz, LPC LHCLK= 33 MHz
Stopped clocks: vidCap-1, SP-Display, HACE, PCI-host
DRAM: 128MB data - 8MB VGA, 32-bit noECC, 2 BA 10 CA, CL=4 BL=4 ap=1, 61440 us refr, DQSipv=0x2020202
Reset controls: HACE, PwmFt, displays, MDMA, PCI-host
Register protect: SCU prot, DMC prot, AHBC prot, VIC U-prot
Ethernet MAC-PHY interface mode=6 (RMII + RMII), no MII2DC+DIO pins
do_bootm_linux() armlinux.c:260
do_bootm_linux() armlinux.c:263
do_bootm_linux() armlinux.c:267
do_bootm_linux() armlinux.c:279
do_bootm_linux() armlinux.c:283
do_bootm_linux() armlinux.c:287
do_bootm_linux() armlinux.c:295
Galactic register 1: 400509c0
Starting watchdog timer.
Starting kernel at 0x00008000...
do_bootm_linux() armlinux.c:320
do_bootm_linux() armlinux.c:324 (0x00000386,0x40000100)
Uncompressing Linux............................................................................................... done, booting the kernel.
Linux version 2.6.27.43 (buildbot@build-slave-sh-8) (gcc version 3.3.6) #1 Fri Feb 4 00:18:12 EST 2011
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: ASPEED-AST2100
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 30226
Kernel command line: root=/dev/ram ramdisk_size=10804 console=ttyS0,9600 bigphysarea=6144 ractrends.mtdblocks=env,0x20000,0x20000,coredump,0x1500000,0x800000,persist,0x1d00000,0x200000,params,0x1f00000,0x100000,
PID hash table entries: 512 (order: 9, 2048 bytes)
console [ttyS0] enabled
mach/timer.c: Just lost 80 clock interrupts.
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 119MB = 119MB total
Memory: 82144KB available (2708K code, 246K data, 124K init)
Calibrating delay loop... 131.48 BogoMIPS (lpj=657408)
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: Testing write buffer coherency: ok
net_namespace: 804 bytes
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 10804K
NetWinder Floating Point Emulator V0.97 (double precision)
bigphysarea: Allocated 6144 pages at 0xc128e000.
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 181
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered (default)
ttyS0 at MMIO 0x1e783000 (irq = 9) is a GUC-ASPEED UART
ttyS1 at MMIO 0x1e784000 (irq = 10) is a GUC-ASPEED UART
brd: module loaded
loop: module loaded
FTGMAC100: ASPEED FTGMAC Driver, (Linux Kernel 2.6.15.7) 11/17/2008 - by ASPEED
FTGMAC100: eth0: at 0xfe660000 IRQ:2 noWait:0, MAC 00:21:28:bb:fd:76
FTGMAC100: eth0:ftgmac100_reset, phyAddr=0x0, miiPhyId=0x0040_61e4
FTGMAC100: lp->rx_descs = ffc00000, lp->rx_rx_descs_dma = 67ac000
FTGMAC100: lp->rx_buf = 00000000, lp->rx_buf_dma = 0
FTGMAC100: lp->tx_descs = ffc01000, lp->tx_rx_descs_dma = 67bd000
FTGMAC100: lp->tx_buf = 00000000, lp->tx_buf_dma = 0
FTGMAC100: eth1: at 0xfe680000 IRQ:3 noWait:0, MAC 00:21:28:bb:fd:77
FTGMAC100: eth1:ftgmac100_reset, phyAddr=0xff, miiPhyId=0x0000_0002
FTGMAC100: lp->rx_descs = ffc02000, lp->rx_rx_descs_dma = 67c1000
FTGMAC100: lp->rx_buf = 00000000, lp->rx_buf_dma = 0
FTGMAC100: lp->tx_descs = ffc03000, lp->tx_rx_descs_dma = 67d4000
FTGMAC100: lp->tx_buf = 00000000, lp->tx_buf_dma = 0
Ractrends Flash mapping: 0x2000000 at 0x10000000
Bank #0: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Bank #0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
Number of banks found = 1
GetMTDPartitions() says string is "env,0x20000,0x20000,coredump,0x1500000,0x800000,persist,0x1d00000,0x200000,params,0x1f00000,0x100000,"
MTD Partition 0 : fullpart @ 0x0 of Size 0x2000000
MTD Partition 1 : env @ 0x20000 of Size 0x20000
MTD Partition 2 : coredump @ 0x1500000 of Size 0x800000
MTD Partition 3 : persist @ 0x1d00000 of Size 0x200000
MTD Partition 4 : params @ 0x1f00000 of Size 0x100000
Creating 5 MTD partitions on "Bank #0":
0x00000000-0x02000000 : "fullpart"
0x00020000-0x00040000 : "env"
0x01500000-0x01d00000 : "coredump"
0x01d00000-0x01f00000 : "persist"
0x01f00000-0x02000000 : "params"
wdt: AST2100 WDT is installed.
wdt: AST2100 WDT nowayout = 1, heartbeat = 30 secs
wdt: AST2100 WDT guardstartupshutdown = 1
wdt: AST2100 WDT startuptimeout = 600, shutdowntimeout = 60
wdt: AST2100 WDT was enabled at driver start, time remaining 53 secs.
wdt: Guarding startup, setting watchdog for 600 seconds.
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
RAMDISK: squashfs filesystem found at block 0
RAMDISK: Loading 10801KiB [1 disk] into ram disk... done.
VFS: Mounted root (squashfs filesystem) readonly.
Freeing init memory: 124K
INIT: version 2.86 booting
Creating /var tmpfs
Creating directories in /var...done.
Creating /var/log tmpfs...done.
Calculating module dependencies... done.
Loading modules...
flashinfo
helper
Helper Module Driver Version 1.1
mach/timer.c: Just lost 2 clock interrupts.
Copyright (c) 2006 American Megatrends Inc.
dbgpersist
Persistent Driver Debugger version 1.1
Copyright (c) 2008 Sun Microsystems Inc.
Loading debug: usbhub [success]
1 debug modules loaded
gpiomgr
gpioint
peci
PECI Driver: peci_initialize_device(696) Setup device peci0.
i2c-core
i2c_boardinfo: module license 'unspecified' taints kernel.
i2c-dev
i2c /dev entries driver
i2c-algo-as
i2c-aspeed
i2c-adapter i2c-0: Hardware routines registered
Registered bus id: i2c-0
i2c-adapter i2c-1: Hardware routines registered
Registered bus id: i2c-1
i2c-adapter i2c-2: Hardware routines registered
Registered bus id: i2c-2
i2c-adapter i2c-3: Hardware routines registered
Registered bus id: i2c-3
i2c-adapter i2c-4: Hardware routines registered
Registered bus id: i2c-4
i2c-adapter i2c-5: Hardware routines registered
Registered bus id: i2c-5
i2c-adapter i2c-6: Hardware routines registered
Registered bus id: i2c-6
i2c-boardinfo
videocap
AST Video Capture Driver Version 1.0
Copyright (c) 2005-2006 American Megatrends Inc.
usb
Initializing USB Devices -
USB Device Endpoint Driver
Copyright 2006 American Megatrends Inc.
usb_init(): --USB INITIALIZING-- version MOD-VER:2011-02-04,00:09:46 with UsbEth and EndPoint-Remapping: 1
USB GlobalDisconnect(): Called
(E)ethBot_ConvertMacStr: converting '002128574716'
Init AST11 Success
USB GlobalReconnect(): Called
mach/timer.c: Just lost 2 clock interrupts.
USB Driver is Successfully Initialized
btkcs
All modules loaded.
... done.
Checking device file systems
Finished check of device file systems
Checking configuration files state ...
Image date: Fri Feb 4 01:06:21 EST 2011 Image revision: 62572
Conf date: Fri Feb 4 01:06:21 EST 2011 Conf revision: 62572
Configuration files state good after upgrade.
Starting Platform Initialization: platinit.
Running ldconfig...done
Starting Platform Initialization: c10init.
Starting FRU update program, platform id phase: frutool.
Starting spdiag Platform Init: /usr/local/bin/spdiag Done (0)
Setting up networking...done.
Hostname: SUNSP-1113FMN04D.
Setting up IP spoofing protection: rp_filter.
Configuring IPv6...done
Configuring network interfaces...FTGMAC100: eth0:ftgmac100_open
mach/timer.c: Just lost 3 clock interrupts.
FTGMAC100: eth0:ftgmac100_reset, phyAddr=0x0, miiPhyId=0x0040_61e4
FTGMAC100: eth1:ftgmac100_open
FTGMAC100: eth1:ftgmac100_reset, phyAddr=0xff, miiPhyId=0x0000_0002
SIOCSIFNETMASK: Cannot assign requested address
SIOCSIFBRDADDR: Cannot assign requested address
Failed to bring up eth1.
done.
Starting Constellation Blade Daemon: c10bd.
Running ldconfig...done
Starting portmap daemon: portmap.
Starting ILOM Watchdog daemon.
wdt: WDT device opened. Watchdog starting with heartbeat = 30 secs
mach/timer.c: Just lost 6 clock interrupts.
wdt: AST2100 WDT was enabled at driver open, time remaining 556 secs.
Done
populating memstore vars from disk
Running plat...plat: platform=b10, chassis=c01
Done running plat
Identifying Product Data...done.
Starting FRU info cache program: frucache.
INIT: Entering runlevel: 3
Preparsing sensor.xml...
Starting Shared Sensor Broadcast Daemon: ssbcastd Done
Starting system log daemon: syslogd and klogd.
Starting capidirect daemon: capidirectd . Done
Starting Event Manager: eventmgr . Done
Starting ipmi log manager daemon: logmgr . Done
Starting System Avoidance Daemon: sad Done
Starting user mgmt upgrade program: usrmgt_upgrade.
Starting the Health Monitor Daemon...
Starting portmap daemon: portmap.
Starting Host console Daemon: consd . Done
Starting capidirectd: Done.
Starting Error Telemetry Collection Daemon: etcd . Done
Starting Fault Diagnosis Daemon: fdd . Done
Starting IPMI Stack: . Done
SSH RSA Host Key Files already exist. Skipping key creation ...
SSH DSA Host Key Files already exist. Skipping key creation ...
Starting sshd.
Starting OpenBSD Secure Shell server: sshd-man.
Starting SP fishwrap cache daemon: fishwrapd . Done
Starting Network Controller Sideband Interface Daemon: ncsid . Done
Starting Platform Obfuscation Daemon: pod . Done
Starting lu main daemon: lumain . Done
Starting HT sign on daemon: htsignond . Done
Starting webgo Web Server: webgo . Done
Starting Detection/Diagnosis After System Boot: dasboot Done
Starting Shared Sensor Poller: sspoller Done
Starting Servicetags discoverer: stdiscoverer.
Starting Servicetags listener: stlistener.
Starting Dynamic FRUID Daemon: dynafrud Done
Starting FRU info cache program: frucache.
SUNSP-1113FMN04D login:For which reason do you want to known the SP processor model ?
-
Can anyone tell me what is this all about???
int timeout = 500; // half a second
SocketAddress socketAddress =
new InetSocketAddress(host, port);
Socket socket = new Socket();
socket.connect(socketAddress, timeout);It's a piece of code from a "client" program that tries to
open a socket connection to a given "host" on a given "port".
A timeout prevents the client from being stuck during the connection. -
When I open the website as http://oldc.in then there posting are going out of boxes so please can anyone tell me about fixing this problem? This problem is going only with mozilla firefox.
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
*http://kb.mozillazine.org/Websites_look_wrong
*http://kb.mozillazine.org/Website_colors_are_wrong -
Help! Can any tell me what cause / remedy is for this error
Can any tell me what cause / remedy is for this error:
[1/29/08 10:52:05:009 GMT] 4131a8 SystemOut
U 2008-01-29 10:52:05,009 [QuartzWorkerThread-0] FATAL
com.scheduler.service.businessservice.ReportExecution
() 190470534 - ****** METHOD FAILED ******WebIntelligence SDK / JSP
Exception --- Number :10480 --- javaError : WI Internal Error = 100
--- Description : WI Error while trying to get HTML view for the
documentAfraid I haven't seen that before. The only thing I could suggest is to boot from the 1st Install disk and run the hardware test. I would wonder about the video card. You might also post in the MacPro forum. I just got MY MacPro today, and the MacPro Forum is where I would go:
http://discussions.apple.com/category.jspa?categoryID=194
The only other thing I can think of is to launch Console from the Utilities folder and see if any errors are being reported.
Francine
Francine
Schwieder -
Can anyone tell me what this error means?
Hi All
The following error was encountered by a printer who has opened a supplied PDF in Acrobat, Saved it as a postscript and then run it through distiller server 6. Can anyone tell me what this error means and what sort of things can cause it?
%%[ Error: syntaxerror; OffendingCommand: ! ]%%
Stack:
/PaintProc
5.32031
/YStep
258.404
/XStep
[257.404 5.32031 258.404 5.32031]
/BBox
1
/TilingType
1
/PaintType
1
/PatternType
-mark-
-mark-
-mark-
-save-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%Something to do with software from wireless.umass.edu.
-
I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??
Hello,
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1 -
My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.
Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen -
We got a new Apple TV for Christmas and it works wonderful. However, my question is this. We are on a satelitte internet system and our bandwidth is limited. Can anyone tell me what effect it will have on using up my 10 megs of bandwidth? If I run over the 10 mgs, the service either slows way down until it is reset on the first of the next month or I have to purchase additional bandwidth and it can get expensive.
Any information would be greatly appreciated.If you only have a 10MB limit on the Internet connection you might as well not have Internet access and certainly should not attempt to stream anything.
If the limit is 10GB, then you will need to be careful with streaming as most video is 1-3GB for a one hour show. -
I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac
Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.
-
I can't update my software because software update tells me I'm not connected to the internet... if that's true how am I able to ask this question?... Can anyone tell me what's going on and what I need to do to correct this?
If you have a slow connection speed, update will not download.
Are you using broadband and are you close to the modem? -
Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?
AFP - Apple Filing Protocol
The Network Attached Storage (NAS) that you are pointing Time Machine at does not have the features needed by Time Machine in order to do its Thing. Time Machine needs some specific features that are not typically available on generic networked storage devices.
There are manufactures that support the Mac OS X HFS+ file system formats and implement all the needed AFP protocol packets necessary so that they can be used with Time Machine, but apparently yours does not.
If you are not using a networked mounted volume for Time Machine, then more information will be needed about your Time Machine setup.
Maybe you are looking for
-
I would like to make a screen saver in java. But i do not find in the appropriate documentation classes. Can you help me. My screen saver may ask a password when the user want to exit it.
-
Hi all, What are Adhoc reports in HR? Best Regards Akshay Moderator Message: Interview questions are not allowed. Edited by: kishan P on Nov 10, 2010 7:05 PM
-
Tried updating now phone is dead
Just installed the Desktop Manager on my Vista PC and backed up all the data, etc, then got a notification that an update was available. I've been having issues where if I press the 'j' key it types 'jk', same with the 'k' key and if I use the bottom
-
Placing images causes freeze up.
I am currently running CS3. Suddenly when I try to place an image the program freezes and I need to force quite. I have tried uninstalling fonts, deleting prefrences, software updates. Nothing is working. Suggestions?
-
Hi there im using Postgesql driver.. have read the FAQ and checked my path in winXP.. all seems OK to me.. CLASSPATH=C:\Program Files\Apache Group\Tomcat 4.1\common\lib\pg73jdbc3.jar;.; the .jar file is there.. try { // load the driver