HELP! Can Creative build a Windows Vista driver for my Nomad Zen USB 2.0

Hi there,?I just upgraded my operating system to the Windows Vista 34-bit thinking that I would actually be keeping up with the times but instead found myself leaving behind some old "toys" that no longer work with this computer...help!?Fingers crossed that Creative will come up with a solution to this problem. I love my NOMAD!?Thanks.
~Alex

It's multi-voltage (00-240V), so the voltage is not an issue. All you need is the plug adapter, as you mention.

Similar Messages

  • How to get the Windows Vista Driver for ATI Radeon 7500 card?

    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Thank you.
    regards,
    W. Thong

    wthong wrote:
    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    The Radeon 9000 driver works for the Radeon 7500 card.  I have successfully used it on a T43 with Vista Ultimate x86
    wthong wrote:
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Unfortunately no.  The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
    Cheers,
    Bill
    I don't work for Lenovo

  • Windows Vista Driver for Sound Blaster 5.1 P

    I want driver for Windows Vista 32 Bit edition for Sound Blaster 5. PCI sound card. I have loaded the Windows XP driver but as a result of that it is playing audio in 2 speaker stereo mode, but i have creative 5. speaker system. As a result of that sound is coming almost only from the front two speakers. Creative MIXER is also not working. Please suggest a solution.

    Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

  • Windows Vista claims for "Bluetooth Peripheral Device" driver

    When I connect my iPhone via bluetooth to my computer for "tethering", Windows Vista claims for "Bluetooth Peripheral Device" driver and i can´t connect.
    Where is the driver? Anyone knows it?
    Thanks!

    My Mac Book Pro decided to update with windows update ... I lost bluetooth and when my machine started up it said found new hardware ... and proceeded to look for the driver BCM2046A ... its not on the Mac Discs nor on the XP Disc ...
    I searched and searched and searched ..bump
    I then found this link download and use ... and pass on ....
    http://www.broadcom.com/support/license.php?file=SetupBtwDownloadSE.exe

  • Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

    Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

    More info,
    I have bootcamp with Windows 7 installed, do I need to run some "Driver compatibility checker" after the Windows 7install?
    if so what is the name of it?
    thanks

  • Hey there, whenever i try to start iTunes in my laptop amsg coming up saying : data execution prevention prevented iTunes from starting (Dep), would you Pls help me out.I have windows vista installed.

    hey there, whenever i try to start iTunes in my laptop amsg coming up saying : data execution prevention prevented iTunes from starting (Dep), would you Pls help me out.I have windows vista installed.

    No, i do not have quickTime player.
    I have tried to close dep off for iTunes but failed to do so as i got a msg that iTunes can't work without Dep in execution data prevention.

  • I can not seem to get the driver for my HP Photosmart C5180 with Windows 7. I can't find it.

    I can not seem to get the driver for my HP Photosmart C5180, I can not seem to find it anywhere in the site,, I have 1 XP Pro and  2 Vista PC's running with my printer.  I have been trying to find where I can find the driver for my HP  Photosmart printer.  Just tried to us a new Microsoft 7 PC.    Where can I get it ? 

    From here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=1153481&task=...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How can I get a Windows Vista 32 bit version of Photoshop, please?

    How can I get a Windows Vista 32 bit version of Photoshop, please?

    Hi Kevinhannan,
    No current Photoshop supports this configuration.
    Photoshop CS5 was the last version of Photoshop to support Windows Vista.
    Photoshop Elements 12 was the last version of Photoshop Elements to support Vista as well.
    We no longer offer Photoshop CS5 or Elements 12.
    You might look at Amazon to see if you can get either product listed above. Just be careful when purchasing, make sure you know who you're buying from!
    Regards,
    Pete

  • If I have mountain lion would and am trying to run parallels would I have to run Windows 7 or can I just run Windows Vista?

    If I have mountain lion would and am trying to run parallels would I have to run Windows 7 or can I just run Windows Vista?

    It's the other way round: first, you install Parallels, and then you can install Windows 7, 8, Vista, whatever you want. Or Linux. For more information visit the Parallels website.

  • HT5610 How can You authorise your Windows Vista computer??? I do not get this drop down menu nowI cannot get this here, have been trying for hours, why is this so uncooperative? My first impression of I tunes is not so good after that.

    How can you authorise your windows vista computer to play stuff you downloaded from itunes???  I cannot get this drop down menu shown on your support pages whatever I do.    I have been trying for ages.  This is not a good first impression.

    Authorize a Mac or PC
    Review the following before you authorize a computer:
    You can authorize up to five computers with your Apple ID.
    You must authorize your computer to download past purchases, use Home Sharing, or use the Automatic Downloads setting.
    You can play unprotected music that's in the AAC file format without authorizing your computer. This includes iTunes Plus tracks and content  from sources other than the iTunes Store, like your audio CDs.
    To authorize a computer, follow these steps:
    Open iTunes.
    Choose Store > Authorize This Computer from the menu bar.
    You may need to show the menu bar to see this option in Windows.     In earlier versions of iTunes, you can access this option from the Advanced menu.
    Enter your Apple ID and click Authorize.
    If your Apple ID uses an expired MobileMe account, you can still authorize your computer.
    In some cases, iTunes may ask you to authorize the computer again. iTunes should use the same authorization as before if the computer is in your  list of authorized computers.
    Learn what to do if iTunes repeatedly asks you to authorize when you try to play your content.
    http://support.apple.com/kb/ht1420
    Note : If you are Unable to see the Store Tab on your iTunes then click anywhere on your iTunes and press
    Ctrl + B key on your keyboard once and you should be able to see the Store tab in your iTunes.

  • Creative Suites CS2 Windows Vista installation

    Question: Installation of Creative Suite CS2 Windows Vista 64. bits. I was able to installed the disk1 but the disk2 I cannot.
    Error Message "Windows cannot access the specfied describe, path, or file. You may not have the appropriate
    permission to access the item.
    Please response How could I continue the installation?
    Thank you for your response.
    Frank4249

    CS2 is completely unsupported under Vista and 64 bits adds more problems.
    Best advice is to upgrade. CS5 will be shipping soon.
    Bob

  • Windows Vista Drivers for 1820 and 1616 - Lets have some drivers ple

    RePost from http://www.productionforums.com/view...?p=47643#47643<img alt="" src="http://www.productionforums.com/images/icons/icon8.gif[/img]?Lets have some drivers please
    <span class="postdetails">Windows Vista Drivers for 820 and 66
    I hate to say this about E-MU but the way they are dealing with Vista Drivers is unprofessional. I am a repeat customer of Creative products and was so impressed by my old Platinum eX that I bought a second to run duals for tons of audio processing. That was back in the day. Then I jumpped ship and tried out an M-Audio Firewire 40. That did not last too long beforei was completely unimpressed. So I came back to Creative... Purchased a 820 in the box. So impressed I turned around and purchased a 66 in the box just 8 months later. Both ran smooth as butter... All until i just recently built my new system designed primarily with audio production in mind.
    With a setup like this, who needs a mac?
    AMD Athlon X2 x64 Dual Core +6000 3.0 Ghz
    2 Gigs Corsair
    Samsung SyncMaster 206BW 2" Wide Screen
    EVGA NVidia 9700s 256 DDR3 Graphics
    SATAs up the yin
    and a PCIMIA to PCI Dock
    All under Vista Ultimate OEM
    And Guess what?
    Months into RTM of Vista...
    E-MU is caught pushing release dates.
    Last month it said they would release beta drivers middle of April...
    I waited, patiently I might add.
    I waited<waited some more, I try running xp drivers... computer wont even try to install them properly.
    My software waits, computer waits, turns into a gameing machine just because my all together 600 dollar investments in Creative are not important enough to leld me the drivers i need to be producti've in what i love.
    I need x64 drivers stat. I need them working, I need them installable without a glitch, a hitch, no driver signing problems, no questions, no fuss no muss. I find it ironic that you guys at E-MU are willing to jump right in there and make sure to have drivers compatable for you new products, yet faithful advocats of the most powerful soundcards you have are sitting here dead in the water because you dont find it nessesary to place priority on ready and waiting end users who have purchased long term support buy investing large amounts of moola into hardware from your company.
    Come on, its not like the 820 or the 66 are exactly legacy technology. We are talking about Hardware that is only two years old and should be usable for up to 6 years. This is deffinatly a strike against the company and just goes to show where Creative stands.
    I have stood by waiting in silence for a very long time.
    Now i think my time has come to tell how i feel and i believe there are alot of others out there that feel the same. the only items that do not work soothly are my E-MUs... go figure.
    And I have been looking forward to all i can do running both of them side by side.
    Oh yes, and that link posted above to the beta news for vista... its a joke. open up your betas, and have a real dev tell us what the hang ups are... At least give us real concreate reasons why it is taking so long.
    with that said, when you guys get yoru act together and get me some drivers, I will sit happy as a lark.
    My thoughts for today.
    ~Alpha-Beta ReaKKtor

    Hello Silas,
    sorry for my bad english
    I already checked that page. On the first time I was trying to install Vista on a clean hard drive. The installation process finishes without errors but after installation Vista shows me a lot of error messages, mostly about unknown hardware. So I installed all available drivers I have found on Toshiba web site. It not helped me too much, hardware problems still remains. I could not find out what exactly causes probles. Finally I decide to install XP and then upgrade to Vista. Now everything seems to be ok. :D
    There was some hardware problems but much easier to resolve. It seems to me that Toshiba did not provide all the drivers, for example StarForce Protection drivers. Vista did not recognized this hardware on the first time.
    Now it works!

  • Windows 7 Driver for VFO230

    Windows 7 driver for Creative Live! IM Pro model # VFO230 is needed. I can only find Windows Vista driver online at this time. I used this camera on windows vista service pack 2 but today got a newer computer with windows 7 operating system and would still like to use this camera. I could not locate a beta windows 7 driver for the VFO230 model either. If there is a compatible driver for Windows 7 that will work with camera model # VFO230 please let me know which one it is and where I can obtain it.
    Please and thank you.

    Hello Stoiko,
    Thanks for the post.  Depending on which model of HP LJ 1100 that you have, the drivers for Win7/64 can be located here:                                                                                                                                                                                             Good Luck!
    HP LJ 1100
    http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=14925
    HP LJ 1100 All-in-One
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=12006&spf_p.t...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Problems with the Vista Driver for Audigy 2

    Hello erverybody,
    today I installed Vista Ultimate 32bit. With the result that the applications and drivers of my Creative CD don't work. I downloaded the new Vista Driver for my Audigy 2 ZS but I must find out that there are no DTS, EAX and also no CMSS 3D Support integrated is.
    I could only choose the option CMSS in the audio console but no CMSS 3D as i have it under windows xp.
    My question to Creative, is it planed that these features will be supported with vista in the future or can i take my soundcard to the garbage ?
    LG BenMessage Edited by Gnubbel85 on 06-05-200706:55 AM

    There is some kind of unofficial driver version located here: I'm currently downloading it and I'll?try. Part http://files.filefront.com/SBAXWXCD+R2partrar/;8604885;/Part2: http://files.filefront.com/SBAXWXCD+R2part2rar/;8606942;/?Since there seems no official way of using my hardware's?DTS and Dolby Digital decoding function on Vista and this is common for all Audigy. I have Audigy 2 ZS plat. , I love?this card It sounds best in the world but Creative has failed to satisfy its customers on Windows Vista. A company has to make its customers feel special, I don't think I'm going to buy another Creative product?if this issue is not resolved.

  • How can i download win 8 64x driver for mac early 2011

    hi my friends
    how can i download win 8 64x driver for mac early 2011

    How did you download it? Did you download it from withing Boot Camp Assistant and save it in accordance with the instructions? How did you try to install it? You install the Windows Support software from within Windows. Did you read and follow the Boot Camp installation guide and help files?

Maybe you are looking for