HELP! Can I view a site I created with iWeb using a personal domain?
Sorry in advance if this question has already been addressed. I too am sort of a newbie to iWeb. I just purchased a domain name through Google Apps. I would like to create my website through iWeb using the domain name ("www.youngvoters08.com") that I already purchased through Google Apps.
At this point, I'm incredibly confused. Is it possible to type in my domain URL (that I purchased through Google Apps) and have my iWeb website come up? I set up my personal domain through .Mac and I even tried publishing its contents to a folder (that was even more confusing). The personal domain option says it will take up to 48 hours to link to my domain.
All I want for Christmas is to be able to type in "www.youngvoters08.com" and be directed to the site I created on iWeb (as opposed to creating my site through Google Apps). Is this at all possible? And does it require me to be patient for 48 hours?
I'm afraid that the .Mac personal domain option means that I have to have already created a website with another service provider, and it doesn't mean that the personal domain I already purchased ("www.youngvoters08.com") will take me to the website I created through iWeb. I'm also weary that I wasted $10.00 by buying a personal domain through Google Apps, especially if I cannot create the contents of my website through iWeb.
Did that make any sense at all??? (Sorry for the confusion and redundancy:)
If you have both sites on one domain file - that is they both load into iWeb at once - click on the name of site 2 in the sidebar and drag it to the top of the list so that it is now in the #1 position. Now do a "Publish all to .Mac".
Your domain name URL is being directed to the index.html file in the Finder/Go/iDisk/My iDisk/Web/Sites folder. This file opens the site that is at the top of the list in iWeb or, if you are publishing your sites individually, the last site that you uploaded.
Similar Messages
-
Can someone help me. I had to change my hard drive few weeks ago and lost everything. I made a site via iweb and my site is still on line but I don't know how can I get my site back on my iweb with my new hard drive.
Patrick ~ Welcome to the Support Commuities. Here's where iWeb's key Domain file (containing your site data) is usually located:
...But rather than backing up just that file, consider using Time Machine and/or SuperDuper. -
How can I upload a site I built with Iweb 08 onto iweb 09
Hi,
I built my site on iweb 08 and then upgraded to iweb 09 after fixing a bug.
now my iweb doesnt recognize the pages i built with iweb, and i cant open those pages.
can anyone help me?Welcome to the Apple Discussions. Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
2 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
3 - reboot.
4 - launch iWeb and see if the domain file will open.
If that doesn't help continue:
5 - move the domain file from your User/Library/Application Support/iWeb folder to the Desktop.
6 - launch iWeb, create a new test site and save.
7 - go to the your User/Library/Application Support/iWeb folder and delete the new domain file.
8 - move your original domain file from the Desktop to the iWeb folder.
9 - launch iWeb and try again.
OT -
Please can i view your site created using iWeb2.0 ?
Hello all
I'm in South Africa and i don't know when I'll be able to upgrade my iLife to 08.
I'm dying to see what the new iWeb allows you to do... please can everybody who has uploaded pages created with iWeb 2.0 give me their URLs...
Many thanks
Maxhttp://gallery.mac.com/emily_parker
That page gives you a taste of what is in store for these new features.
The page has hundreds (335) of page elements and takes a while to load even on a fast Internet connection.
Once loaded, slowly drag your mouse across the image used in one of the new photo album links. Drag right to left diagonally and you can "skim" through the images used in that page without actually loading that page.
A viewer can "download" nearly any file directly from the Web page. They can also download entire "collections" of images and even movies posted on those pages (no need for QuickTime Pro).
There are different page "background" colors for the viewers and a "slider" that can adjust the image display size. You can choose between "Grid, Mosaic, Carousel and Slideshow" displays without needing to reload the page.
Each image has a new "Info" window which shows the EXIF data found in the file. Users can also "Subscribe" to your image albums and they will download to your computer and show in your copy of iPhoto 8.
Does this page help you decide to upgrade? -
How I do to open a website created with iWeb in other computer
Hi,
My web site was created with iWeb last year in other computer, a dead MacBook. I have a copy of my web files created with iWeb, and moved to my new computer, iMac.
Now I want to edit my web using iWeb, but I can´t find the way to open the files to modify and actualize my web, etc...
Does anyone know how to do this? can iWeb open and edit a web site created by itself?
Help will be appreciated,
Felix.-
10.6.7
iLife ´11Felix_MM wrote:
can iWeb open and edit a web site created by itself?
Felix ~ No, only iWeb's Domain file can be opened in iWeb. See this Apple doc on How to back up MobileMe data. It says:
“Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but *there is no way to import published pages back into iWeb*. You can manually back up the Domain file, or use Backup to back it up.”
If you don't have a backup of your Domain file (e.g. via Time Machine), paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWebBackupretrieve.html -
Website created with iWeb looks different in IE and Firefox than Safari-why
So I spent a few hours working on my Home and About Us page. Then, while browsing this forum, I started seeing posts about how sites done with iWeb might not look good in IE and/or Firefox. I decided to test out my work. I zipped up my site files and emailed them to myself. I went to my Dell desktop and downloaded the files to that computer. I opened up the home page in Firefox first. The site seemed to look ok, and both the home and about us page links showed up and were functional (i.e. I was able to browse back and forth between the two pages). However, I had some bullet points on the about us page that had a green border around them. This rendered fine in Safari on my Mac, but in Firefox, the bottom line of the box was not connected! Why?
After viewing in IE, I was depressed. The site didn't look at all like it should have. Not only that, but I couldn't navigate between the pages, since the links for home and about us were not at the top. What can I do to make sure that a site I create with iWeb looks good in Safari, IE, and Mozilla Firefox?
-A stumped newbieWell I see that you and I share the same problem, I posted the same type of question and am anxiosly awaiting replies on this topic, as it is very important
I own a small business, and every hour a customer cannot view my site is a customer lost to incompatibility issues.
I hope someone can help answer these issues.
http://www.siegfriedscall.com -
I'm trying to update a Muse site and it keeps telling me that the site was created with a different version of Muse. I have updated Muse and still can't access the site to make changes.
Hi rgarden95,
Can you please confirm the exact version of Muse you are opening the file with?
To check the version of Muse, please click on help->About Adobe Muse CC.
Regards,
Akshay -
How can I view an AI file created on a MAC on a PC without corrupting the fonts?
How can I view an AI file created on a MAC on a PC without corrupting the original fonts? An AI file was created with an image and text on a MAC. When the AI file was opened on a PC, the text fonts were not the same as originally created. Also, the same AI file was saved to PDF on the MAC. When the AI file was opened on a PC, there wasn't anything visible. Anyone have any ideas?
Are you using the save version of Illustrator on both Mac and PC? If so, and you have the same fonts installed on both machines you should be able to open it without any problems. You may need to tell it which fonts to assign, they are not always named the same. If you don't need to edit the text, you could convert the text to outline and eliminate the need for fonts.
-
how can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help
Try a 2 finger Pinch to see the tabs.
-
How do i edit a site created with iweb
I created a site last year with iweb, but now when I try to open it, it only lets me create a new site. I can see the thumbnail in my finder view, but cannot edit it. Help.
Thanks in advanceTry this:
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
Need urgent help in configuring Client to Site IPSec VPN with Hairpinning on Cisco ASA5510 - 8.2(1).
The following is the Layout:
There are two Leased Lines for Internet access - 1.1.1.1 & 2.2.2.2, the latter being the Standard Default route, the former one is for backup.
I have been able to configure Client to Site IPSec VPN
1) With access from Outside to only the Internal Network (172.16.0.0/24) behind the asa
2) With Split tunnel with simultaneous assess to internal LAN and Outside Internet.
But I have not been able to make tradiotional Hairpinng model work in this scenario.
I followed every possible sugestions made in this regard in many Discussion Topics but still no luck. Can someone please help me out here???
Following is the Running-Conf with Normal Client to Site IPSec VPN configured with No internat Access:
LIMITATION: Can't Boot into any other ios image for some unavoidable reason, must use 8.2(1)
running-conf --- Working normal Client to Site VPN without internet access/split tunnel
ASA Version 8.2(1)
hostname ciscoasa
domain-name cisco.campus.com
enable password xxxxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxx encrypted
names
interface GigabitEthernet0/0
nameif internet1-outside
security-level 0
ip address 1.1.1.1 255.255.255.240
interface GigabitEthernet0/1
nameif internet2-outside
security-level 0
ip address 2.2.2.2 255.255.255.224
interface GigabitEthernet0/2
nameif dmz-interface
security-level 0
ip address 10.0.1.1 255.255.255.0
interface GigabitEthernet0/3
nameif campus-lan
security-level 0
ip address 172.16.0.1 255.255.0.0
interface Management0/0
nameif CSC-MGMT
security-level 100
ip address 10.0.0.4 255.255.255.0
boot system disk0:/asa821-k8.bin
boot system disk0:/asa843-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name cisco.campus.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network cmps-lan
object-group network csc-ip
object-group network www-inside
object-group network www-outside
object-group service tcp-80
object-group service udp-53
object-group service https
object-group service pop3
object-group service smtp
object-group service tcp80
object-group service http-s
object-group service pop3-110
object-group service smtp25
object-group service udp53
object-group service ssh
object-group service tcp-port
object-group service udp-port
object-group service ftp
object-group service ftp-data
object-group network csc1-ip
object-group service all-tcp-udp
access-list INTERNET1-IN extended permit ip host 1.2.2.2 host 2.2.2.3
access-list CSC-OUT extended permit ip host 10.0.0.5 any
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq www
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq https
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq ssh
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq ftp
access-list CAMPUS-LAN extended permit udp 172.16.0.0 255.255.0.0 any eq domain
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq smtp
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq pop3
access-list CAMPUS-LAN extended permit ip any any
access-list csc-acl remark scan web and mail traffic
access-list csc-acl extended permit tcp any any eq smtp
access-list csc-acl extended permit tcp any any eq pop3
access-list csc-acl remark scan web and mail traffic
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq 993
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq imap4
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq 465
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq www
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq https
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq smtp
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq pop3
access-list INTERNET2-IN extended permit ip any host 1.1.1.2
access-list nonat extended permit ip 172.16.0.0 255.255.0.0 172.16.0.0 255.255.0.0
access-list DNS-inspect extended permit tcp any any eq domain
access-list DNS-inspect extended permit udp any any eq domain
access-list capin extended permit ip host 172.16.1.234 any
access-list capin extended permit ip host 172.16.1.52 any
access-list capin extended permit ip any host 172.16.1.52
access-list capin extended permit ip host 172.16.0.82 host 172.16.0.61
access-list capin extended permit ip host 172.16.0.61 host 172.16.0.82
access-list capout extended permit ip host 2.2.2.2 any
access-list capout extended permit ip any host 2.2.2.2
access-list campus-lan_nat0_outbound extended permit ip 172.16.0.0 255.255.0.0 192.168.150.0 255.255.255.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu internet1-outside 1500
mtu internet2-outside 1500
mtu dmz-interface 1500
mtu campus-lan 1500
mtu CSC-MGMT 1500
ip local pool vpnpool1 192.168.150.2-192.168.150.250 mask 255.255.255.0
ip verify reverse-path interface internet2-outside
ip verify reverse-path interface dmz-interface
ip verify reverse-path interface campus-lan
ip verify reverse-path interface CSC-MGMT
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (internet1-outside) 1 interface
global (internet2-outside) 1 interface
nat (campus-lan) 0 access-list campus-lan_nat0_outbound
nat (campus-lan) 1 0.0.0.0 0.0.0.0
nat (CSC-MGMT) 1 10.0.0.5 255.255.255.255
static (CSC-MGMT,internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255
access-group INTERNET2-IN in interface internet1-outside
access-group INTERNET1-IN in interface internet2-outside
access-group CAMPUS-LAN in interface campus-lan
access-group CSC-OUT in interface CSC-MGMT
route internet2-outside 0.0.0.0 0.0.0.0 2.2.2.5 1
route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
http server enable
http 10.0.0.2 255.255.255.255 CSC-MGMT
http 10.0.0.8 255.255.255.255 CSC-MGMT
http 1.2.2.2 255.255.255.255 internet2-outside
http 1.2.2.2 255.255.255.255 internet1-outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map internet2-outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map internet2-outside_map interface internet2-outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as
quit
crypto isakmp enable internet2-outside
crypto isakmp policy 10
authentication pre-share
encryption aes
hash md5
group 2
lifetime 86400
telnet 10.0.0.2 255.255.255.255 CSC-MGMT
telnet 10.0.0.8 255.255.255.255 CSC-MGMT
telnet timeout 5
ssh 1.2.3.3 255.255.255.240 internet1-outside
ssh 1.2.2.2 255.255.255.255 internet1-outside
ssh 1.2.2.2 255.255.255.255 internet2-outside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy VPN_TG_1 internal
group-policy VPN_TG_1 attributes
vpn-tunnel-protocol IPSec
username ssochelpdesk password xxxxxxxxxxxxxx encrypted privilege 15
username administrator password xxxxxxxxxxxxxx encrypted privilege 15
username vpnuser1 password xxxxxxxxxxxxxx encrypted privilege 0
username vpnuser1 attributes
vpn-group-policy VPN_TG_1
tunnel-group VPN_TG_1 type remote-access
tunnel-group VPN_TG_1 general-attributes
address-pool vpnpool1
default-group-policy VPN_TG_1
tunnel-group VPN_TG_1 ipsec-attributes
pre-shared-key *
class-map cmap-DNS
match access-list DNS-inspect
class-map csc-class
match access-list csc-acl
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class csc-class
csc fail-open
class cmap-DNS
inspect dns preset_dns_map
service-policy global_policy global
prompt hostname context
Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y
: end
Neither Adding dynamic NAT for 192.168.150.0/24 on outside interface works, nor does the sysopt connection permit-vpn works
Please tell what needs to be done here, to hairpin all the traffic to internet comming from VPN Clients.
That is I need clients conected via VPN tunnel, when connected to internet, should have their IP's NAT'ted against the internet2-outside interface address 2.2.2.2, as it happens for the Campus Clients (172.16.0.0/16)
I'm not much conversant with everything involved in here, therefore please be elaborative in your replies. Please let me know if you need any more information regarding this setup to answer my query.
Thanks & Regards
maxsHi Jouni,
Thanks again for your help, got it working. Actually the problem was ASA needed some time after configuring to work properly ( ?????? ). I configured and tested several times within a short period, during the day and was not working initially, GUI packet tracer was showing some problems (IPSEC Spoof detected) and also there was this left out dns. Its working fine now.
But my problem is not solved fully here.
Does hairpinning model allow access to the campus LAN behind ASA also?. Coz the setup is working now as i needed, and I can access Internet with the NAT'ed ip address (outside-interface). So far so good. But now I cannot access the Campus LAN behind the asa.
Here the packet tracer output for the traffic:
packet-tracer output
asa# packet-tracer input internet2-outside tcp 192.168.150.1 56482 172.16.1.249 22
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 2
Type: FLOW-LOOKUP
Subtype:
Result: ALLOW
Config:
Additional Information:
Found no matching flow, creating a new flow
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 172.16.0.0 255.255.0.0 campus-lan
Phase: 4
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 192.168.150.1 255.255.255.255 internet2-outside
Phase: 5
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group internnet1-in in interface internet2-outside
access-list internnet1-in extended permit ip 192.168.150.0 255.255.255.0 any
Additional Information:
Phase: 6
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 7
Type: CP-PUNT
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 8
Type: VPN
Subtype: ipsec-tunnel-flow
Result: ALLOW
Config:
Additional Information:
Phase: 9
Type: NAT-EXEMPT
Subtype: rpf-check
Result: ALLOW
Config:
Additional Information:
Phase: 10
Type: NAT
Subtype:
Result: DROP
Config:
nat (internet2-outside) 1 192.168.150.0 255.255.255.0
match ip internet2-outside 192.168.150.0 255.255.255.0 campus-lan any
dynamic translation to pool 1 (No matching global)
translate_hits = 14, untranslate_hits = 0
Additional Information:
Result:
input-interface: internet2-outside
input-status: up
input-line-status: up
output-interface: internet2-outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule
The problem here as you can see is the Rule for dynamic nat that I added to make hairpin work at first place
dynamic nat
asa(config)#nat (internet2-outside) 1 192.168.150.0 255.255.255.0
Is it possible to access both
1)LAN behind ASA
2)INTERNET via HAIRPINNING
simultaneously via a single tunnel-group?
If it can be done, how do I do it. What changes do I need to make here to get simultaneous access to my LAN also?
Thanks & Regards
Abhijit -
I am looking to publish a web site I created in iWeb to another hosting provider. I have never published this site to MobileMe nor do I have a MobileMe account. Can someone please help me?
Hi Larry, no experience with iWeb, (which is ending soon), but what kind of files & folders does it make locally?
You need a Wb Hosting service & an ftp client, if you need more info reply with that & what kind of files/folders it made. -
How do I delete sites created with iWeb and posted with .mac after a format
I am confused about how to delete a couple of sites that I created with iWeb and posted with my .mac after I did a format reload?
I have tried everything. The original files are not on my MacBook Pro because of the format.
I also see them in my idisc, but I is my understanding that on my MacBook Pro that I can delete the files, but they are hosted online. On the online idisk I cannot delete them because there is no option. Please help!!!Using the file menu in Finder:
Go/iDisk/My iDisk/Web/Sites/iWeb/YourSitesAreHere
Highlight selected files and Command/Delete. You will receive a drop down asking you if you are sure; click OK and the files/sites will be deleted immediately from the iDisk.
Mark -
How many website can I create with iWeb?
How many different webpages can I create with iWeb? I just created a site to show friends a slide show from a recent trip, but I need to create another webpage that will have video on it. It would be a totally different subject matter. I do have a .MAC account and not sure if I need to do anything with that so I can have more webpages.
I guess what I am saying is that I am going to need different URL's for the webpages I am going to need to create and want to know how many you can have or create using iWeb.You can have multiple websites, each with multiple pages depending on the need. To make managing multiple sites easier, take a look at iWebSites. The limiting factor, as was pointed out, is the available space on your iDisk. I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
Do you Twango? -
Editing a site created with Iweb - with another program
Hello,
I built a website for a friend and he wants to be able to make small changes on it from time to time and I downloaded a WYSIWYG editor and none of them are compatible with sites created with Iweb...
Does anyone have any suggestions? He runs a windows machine.
Thank you so much!!!Well, not really. A lot of people have their sites built for them and then, with a little guidance, can change out photos, or do a little editing here and there. So your idea certainly has merit.
The problem is, iWeb is a unique html generator. It stores everything you create in the application in a single file, (Domain.sites2), and only the application itself can open this file for editing. iWeb doesn't even create the html until you publish the site, either to a folder or to an Apple server. iWeb also changes many things into .png files--including text--believe it or not, in a well intentioned effort to cross platform better with other browser applications. So even simple text editors, which would normally be fine for changing small things in most websites, will struggle.
Your idea was a good one; it is iWeb that isn't a good candidate for it.
You must therefore now convince this person to become an Apnewbie, and buy a Mac!
-Mark
Maybe you are looking for
-
HT5467 How to change the location service set up when the icon is not inactive?
I can not setting up the location services and change individual location service for each application since the icon are all in the dead icon and I cannot change anything. Is there anyway to make those icons in active?
-
My mac shuts down in prolonged sleep mode "because of a Problem".
If my mac book pro mid 2012 goes to sleep for a prolonged period of time I have to reboot it as hard start and get a message indicating that it shut down because of an problem. How Do I fix this? I had my mother board tested at a mac shop in Nepal w
-
hi, loop at i_vbrp where werks not in ('2300','2301','2302','2303'). do some thing Endloop. how do I implement the same this is throwing an error. Similar way I have to loop, I tried Using RANGES also not working. please help me. Points assure
-
ITunes? / i Photo corrupted?
At first this was only happening in iTunes now it does it in iPhoto. Can anyone explain how this has happened? I have encountered a new error message after trying to burn MANY discs. The message reads, " You have inserted a disc containing no files t
-
Hey all, I have a couple questions regarding using a JPanel's Graphics object to get a an Image object and use that object as a "face" of 3D cube in Java3D. Right now, thanks to the help of many of you guys, I have gotten what I want. That is a cube