Help!  Can't Access the Effects Tab In Soundtrack Pro

I'm not sure what it was caused by, but recently when I open Soundtrack Pro, I recieve the following message:
NSInvalidArgumentException
*** -[NSKeyedUnarchiver initForReadingWithData:]: incomprehensible archive (0x62, 0x70, 0x6c, 0x69, 0x73, 0x74, 0x30, 0x30)
After booting, Soundtrack Pro seems to run perfectly fine except for the fact that I'm unable to select the "effects" option (neither from the overhead toolbar, nor from the inspector pane on the bottom left of the screen).
I found no results through immediate searches online.  Does anyone know what the issue may be and what I need to do to fix it?

This type of problem can be caused by using an add-on that is not compatible with Firefox 4. For details of how to troubleshoot that see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • I can't find the effects tab!

    I'm using 10.0.1 Garageband and need to change the pitch of my voice to make it lower! I can't find the effects tab no matter what I do! Where can I add and edit custom effects? In the previous GB I could just go to Info then Effects. I can't find this to save my life. Can anyone help me?

    The AuPitch filter is really versatile, but you may need toadjust the Formant as well. Then you need to use a patch for your vocal track that has a vocal transformer.
    You will find the old GrarageBand patches with predefined filters and track effects in the "Legacy" section of the GarageBand Instrument library.
    If you use the patch "Legacy > GarageBand  > Vocals > Deeper Vocals" you will see a Vocal Transformer, if you open the Smart Controls for thee Track. There you can adjust the Pitch and the Formant.

  • I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but can't it won't drag to the timeline. I'm using FCE

    I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but it won't drag to the timeline. I'm using FCE

    You cannot drag the effects themselves to the timeline.  You add them to a clip in the Viewer, just as you have done. 
    If the clip was already in the timeline when you  opened it in the Viewer (by double-clicking it in the timeline to open it in the Viewer) and then added the reverb effect, there is nothing further to do, you have added the effect to the clip.  You don't drag it back to the timeline.
    You only have to drag the clip to the timeline if the clip was not already in the timeline (for example, if you opened the clip from the FCE Browser; or set different In and Out points in a master clip to use a different portion of the master clip in a different location in your timeline).
    Depending on the effect you add, you may have to render the timeline after adding the effect.  But I don't think reverb requires immediate rendering.  One other note, you said you were working with an audio clip ... audio clips need to be AIFF (not MP3 or something else) and preferably 16-bit stereo.

  • Safari Error:cannot connect to server.Was able to click on all tabs within website many times,no issues.Now can't access the"shop" tab within website-What do I do Now?

    Safari and/or internet question:
    I have MacDeskTop W/Intel/OS X Lion 10.8.2   and Safari:Ver6.0.2(8536.26.17)
    Currently I am having a big issue to access within this website's the "SHOP section(tab)" I ca click on the tabs and read the info in each section, except for the "Shop" Tab.
    While in the process of paying for my items in my cart, I received a website message saying something
    To the affect that this website is being updated. Your items in your cart will be in your cart.
    Then the website's screen kicked me out the door.
    A few days later I accessed the main page of this website with no problem.
    I can read the information on the main web page pertaining to items I need to purchase, etc., with no problems.
    I click and maneuver from on one tab to another from the main page within this website with no issues.
    When I click on the "SHOP section(tab)" within this website to complete my purchase.
    Part of this website an error occurs on this "SHOP tab".
    "Safari can't connect to the server".
    Safari can't open the page "https://and the name of this website" because Safari can't connect to the server "www.the name of this website".
    I click on the reload from the view of the toolbar and I can't access this website's"Shop section(tab) at all.
    I e-mailed the webmaster of this website a few times, but no response.
    In the past I was able to access the "Shop section(tab") within this website many times to purchase items with no issues.
    Now I am at my wits end as I really need to complete my purchase from this website.
    I cannot purchase these items from other websites. Only this website.
    So, I really need anyone's tech expertise to help me access the "SHOP" tab within this website.
    I also have another website that i have visited numerous times within the last 6 months with no issues.
    Now I can't access this website at all.
    Safari error: "Safari can't connect to the server".
    I can't figure this out
    No issues with:
    * Comcast tech says that My modem, Wi-Fi connections are fine.
    * Cables and wires and Power strip unit to protect my electronics are fine
    * Utility bill is up to date.
    I have a Mac Desktop 23 inch screen (Purchased 01-01-2013)
                                                      Lion: OS X
                                                      Version 10.8.2
                                                      Processor: 2.7 GHz Intel Core i5
                                                      Memory: 8 GB 1600 MHz  DDR3
    I use Safari: Version 6.0.2 (8536.26.17)
    I use the Mail app that shows a postage stamp with the picture of an eagle 
                                                      It is the Version 6.2 (1499)
    I really need help access the "Shop section(tab)" of the website to complete my purchase.
    What is the next step to fix my dilemma?
    Thank-you all in advance with your expertise, and patience.
    Very Much Appreciated.
    With Kindest Regards
    Mac Desktop, OS X Mountain Lion (10.8), Safari: Version 6.0.2 (8536.26.17)

    Hi There Linc Davis,
    Wow, you are the best.
    Yip this is what the website looks like. Great job Linc Davis.
    Not surprised that the "Shop" tab is missing. Darn.
    Well can you try to access it's "sister" website: astralmusic.com and astralmusicshop.com?
    Since you are awesome with the "Flash" can you investigate if this website has a issue withis this "Flash" too?
    Please Linc Davis

  • HELP !!! I can not access the Internet Recovery In Mac Pro!

    HELP !!! I can not access the Internet Recovery on my Mac Pro (mid 2012)! Mac Pro has Internet Recovery ?

    "Regular" Recovery (from the Recovery partition on your Hard drive or your Time Machine Backup) remains available, but Internet Recovery (from firmware only) is not a feature on the silver tower Mac Pro. It is not on this list:
    Computers that can be upgraded to use OS X Internet Recovery - Apple Support
    But the basic recovery features are available if a recovery partition is available:
    OS X: About OS X Recovery - Apple Support

  • I suddenly can't access the firewall tab in the sharing preferences neither

    After doing this for hundreds ot times I tried to connect with an Ethernet connection to another computer and could not do it. I went to system preferences/ sharing and found the firewall tab is not accessible and when I try to activate the services it doesn’t respond and are not activated even though they where once.
    I tried restoring permissions but it did not work.

    Dear BDAqua:
    Thank you. Already did. But it did not work out and the file /Library/Preferences/com.apple.sharing.firewall.plist is not anymore.
    I must also say that I can not start any of the sharing services (that where already activated) because when I click the start button, nothing happens.
    So I also did the same with the files located in: preferences/SystemConfiguration
    preferences.plist
    NetworkInterfaces.plist
    com.apple.nat.plist
    com.apple.airport.preferences.plist
    And they are there now again but the problem persists.
    Thank you for trying to help me

  • Logic can't access the effects of Soundtrack Pro

    I'm wondering why some of the sound effects in Soundtrack Pro can't be access by the media browser of Logic Pro 8?
    Cuz I'm unfamiliar with the UI of Soundtrack Pro

    Please take a screenshot and post the output in your reply.

  • Can I save ALL effects on a Soundtrack Pro clip at once, for reuse w/ FCP?

    i am using soundtrack pro with fcp for the first time. i have several different clips which need the same group of effects (the same sound-tweaking) placed on each separate clip so that that the overall sound of this one scene (composed of many clips) remains the same once its treated. how can i do this? is there a way to save ALL of the effects on a given soundtrack clip and then apply these instantly to the rest of the same scene's clips? in other words, can i avoid having to add many (6, for example) separate custom setting to each separate video clip within a particular scene?
    thanks,
    marc

    jim,
    i fiddled with the scripting function for a few hours, following the instructions within soundtrack's "help" files. i was able to save a script, but once i'm in fcp, i control click on a given file, click "send to...script" then highlight my saved script. always, a dialog box comes up asking if i really want to continue, as it will "destroy" the file. sure enough it does destroy the file, turning the audio into a bunch of very high pitch bleep sounds. so i'm confounded, and, frankly, stupified.
    doug, i'm also stupified with lift and stamp. i can get the sound "palette" opened, but the "save as preset" button is grayed out, making the feature impossible to use.
    perhaps i should place these new problems on a new post but i thought i'd reply here first for what it's worth. i thank you both for your inputs. in theory, either one of these options would be ideal, but i've spent about 3 hours and can't get either to work properly....

  • I have lost the Firefox start page, so can't access the Firefox tab. I keep getting Ask, which I don't want

    For some reason I have started to get a blank type page, rather than the Firefox start page when I open firefox. The blank page has no firefox tab at the top left so I cannot access any of the firefox features by the tab. Also the blank page does not show my bookmarked websites which is an inconvenience. Whenever I type in a search word, the results come up in a page of information promoted by 'Ask"'. I don't want this. I don't know how this has happened but I cannot seem to find a fix. I uninstalled firefox and then reinstalled to see if this would work, but it has not. Can someone help please.

    Try to use the SearchReset extension to reset some preferences to the default values.
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).

  • Itunes help can not access the internet even when the PC is connected

    When opening itunes help the error message is returned that says itunes help is unavailable because my PC has no internet connections, which is ironic since I am typing this!  any help?

    Thank you so so much! I would have never thought to move apps around on my iPad (truth be told the newsstand app is the most useless for me, I wish I could just delete it) and was super happy that iOS 7 allows you finally put that sucker in a file along with the rest of the junk apps I never use.
    Solved he issue! I can upload videos to my vlc for iOS player once again!

  • I can't download movies.  I'm taking a cinema class where the professor provides a link to to a movie to be watched.  I am unable to access the link on my mac pro.  is there an app or software download that will allow me to do this?

    I can't download movies.  I'm taking a cinema class where I am required to watch movies.  My professor provides the link on an electronic blackboard for the movies.  I can't access the link on my mac pro notebook.  Is there an app or software download that can help with this?  I can access the link fine on a pc.

    The "right click" is a function of the OS and those keyboard commands do not work on the iPad at all with the built in virtual keyboard. I don't use an external keyboard - so I cannot attest to the possibility of that working - but there are no keyboard shortcuts with the iPad keyboard.

  • How can I access the Help preferences?

    How can I access the Help preferences? I hate the way the Help window stays in front of every other window, so I really need to change it's behaviour.

    Mary,
    To see the reports button, your workflow user record must be at least Process Administrator (use the admin module to see an individual person's properties, in the Privileges tab I think..)
    The backend stores information suchs as where and when a workitem was processed, but it won't contain the information that was populated on the forms, unless you make the fields you need to searchable fields on the process map. Beware, this can add to the size of the database quickly.
    All of the available tables are documented in the pdf files that are distributed with the product.
    Good luck,
    Sanna

  • I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
    You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

  • Can not access the media card files Blackberry 8310 - HELP

    Can not access the media card files Blackberry 8310.
     I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
     Here are the messages:
     “A media card has been inserted that contains encrypted content which will be unaccessible by this device”
     I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
     Media card support – ON
    Encryption Mode: - Security Password & Device
    Encrypt Media Files – YES
    Mass Storage Mode Support – OFF
     Please note – I can not change the encryption mode since it is set by policy
     Security Options – General Settings – Content Protection – Disabled
     The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
     Unable to display file /media card/ pictures/ing000000xx.jpg.rem
     Here is what I have tried (from the advice on this board):
     1)     Read the files directly off the media card – No good
    2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
    3)     Email the file then read it – No good
    4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
    5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
     So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
     All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
     Thanks for any help you can offer!

    Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Can't access the web-site in my home folder from the internet.  Need help.

    I am trying to publish a website from the Sites folder in my home directory. The website is made and I can access it from from every computer within my ethernet. But despite a couple attempts I made I can not get the website published on the internet.
    I have an Airport Express station. Two Macs and one PC are using the ethernet. As far as I can tell the Airport Express station is directly connected to the internet. I live in a brand new apartment which has Lan outlets in every room next to the electricity outlets. I have a single designated internet IP address.
    To open my computer to the internet I set the "Default Host Option" in the Airport Administrator Utility and selected the default three digits for the "Default Host option" IP address. Then I updated the Airport Express station, manually set the IP address in the Network preferences on my Mac to the "Default Host option" IP address and activated Personal Web Sharing in the Sharing preferences. By doing so I lost my internet connection. It turned out I still had the same IP address that I had before I selected Default Host Option.
    As I understand with the Default Host Option I designate one IP address within the ethernet to receive all traffic from outside. But how do you now tell the Airport Express station which computer on the ethernet will be the host for the incoming traffic carrying the Default Host Option IP address? Apparently just setting the IP address manually in the clients computer Network preferences to the "Default Host Option" IP address doesn't tell the Airport Express station to change the IP address it has assigned to this client to the Default Host Option IP address.
    In another attempt to make my website accessible on the internet I removed the Default Host Option and instead opened Public Port 80 and Private Port 80 for the IP address of the client computer in the Port Mapping tap of the Airport Administrator Utility. But again, no access to my website from the internet.
    To access the website from within the ethernet I use the following web-link, which works fine:
    http://192.xxx.x.x/~user/index.html
    The internet of course doesn't see the 193 IP address. It only sees the Public IP address. Therefore I used the Public address instead of the Private IP address to connect to my website from the internet:
    http://222.xxx.xxx.xxx/~user/index.html
    But as I said, I still can't access the website from the internet.
    I have the feeling that I conceptually don't understand something correctly. I would appreciate if somebody could help me with this problem.

    See this article:
    http://support.apple.com/kb/HT1866
    Sometimes My Music does not show up in special folders in TweakUI.
    If so, see this post:
    http://discussions.apple.com/thread.jspa?messageID=1731188&#1731188##
    If you would rather not mess with the registry you can often work round with a shift key start.
    Hold down the shift key and start iTunes, keep holding down the shift key until you are asked to choose or create a library. If you already have one, navigate to your iTunes folder and choose iTunes Library.itl. Otherwise create a new library in My music.

Maybe you are looking for