Help:Can't connect to an old PM9500 from my PB after upgrading it to 10.4.5

Need help: I can't connect anymore to an old Powermac 9500 from my PB after I upgraded the PB to system 10.4.5. I get the message:this file server uses an incompatible version of the AFP protocol.
Before the upgrade the PB ran on 10.2.8 and it was no problem connecting to the PM9500 (OS 7.5.5) via Appletalk/Ethernet. As I still use the PM9500 to run an Optronics drum scanner, it remains vital to be able to transfer files to my PB.

Hi,
Apple made some changes to the file sharing in Tiger that will cause this problem. It looks like you'll need to upgrade the 9500 to Mac OS 9 or later. More information is available in the Knowledge Base.
charlie

Similar Messages

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now. I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service". My iPhone 5 works perfectly on iOS 8.1.2, on Cellular. I've browsed the blogs and have tried Apple's suggested fix, all to no result.
Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
I've filed a report with Apple, along with a request that they contact me, but no results yet.
Help? (and thank you).

Hello razmee209. Thank you for your response. I spent the better part of yesterday working with Apple Support. They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total. Same problem. I restored from the cloud to recover my apps, same problem.
AT&T installed a new sim card - same problem. I spent time with AT&T Support yesterday, too. In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
I didn't have this issue before I upgraded to iOS 8.1.2.
Everything else with the iPad works fine: WIFI, Personal Hotspot, email, all my apps, etc.
In browsing the web for this issue I see that many other folks have the same problem. I filed a report with Apple this morning, requesting that they contact me, but no word yet. I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
Thanks again for your response and suggestions.

How can I connect to a windows server from a mac book pro

How can I connect to a windows server from a mac book pre?

I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
Any help is greatly appeciated.

Bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?

bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
I'm trying to use the iphone as a remote with keynote, which again worked before the upgrade

Hi russellpaton,
Thanks for visiting Apple Support Communities.
If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
If you can’t use a Bluetooth accessory or car kit
Cheers,
Jeremy

Can't connect to my VPN server from the WAN addres...

I've setup a PPTP VPN server on a Raspberry Pi, so that I can connect to it when out and about and avoid having my android internet use sniffed by random public wi-fi hotspots.
It seems to be working as I setup a Windows 7 connection to it using the LAN address (192.168.1.85) and that connected fine but I can't get it to work through the BT HH3 via the WAN address. I've forwarded port 1723 to 192.168.1.85 and tried disabling the firewall, enabling port clamping and putting the RPi in the DMZ, none of which made any difference.
Is anyone able to help please?

Did some testing from my parents house yesterday and whilst connected to their router (Virgin Media) and/or a local BTWiFi hotspot (I can't honestly remember if I tried both or if I only tested with one or the other), I was able to connect to the VPN Server from my phone.
I can also connect from my home PC using Putty to the VPN Server on SSH (port 22) with that forwarded in the router using the WAN address, so NAT travesal doesn't seem to be an issue.
Yet I still can't connect to the VPN Server from home, whether connected to my HH3 or a local BTWiFI-with-FON hotspot, using the WAN address, only the LAN address, which doesn't make any sense to me.
I don't think it's relevant to this problem but I want to ask a question about the router firewall as the description for Default (which is what I have enabled) says "Allow all outgoing connections and block all unsolicited incoming traffic. Games and application sharing is allowed." but it doesn't appear to block unsolicited incoming traffic as otherwise I don't think I'd have been able to connect to the VPN Server from my parent's house, or on SSH from my PC using the WAN address. So is the description incorrect?

Can't connect to SQL Server 2000 from serlet

Hi,
I can connect to SQL Server 2000 from standalone program after set the classpath properly.
but I Can't connect to SQL Server 2000 from serlet, I am using Tomcat 4.1 and Win2K pro now. Do I need to set something for servlet just like CLASSPATH?
Any help will be appreciated.
package usingjsp;
import java.io.*;
import java.sql.*;
import javax.servlet.*;
public class JDBCServlet extends GenericServlet
protected Connection conn;
public void init()
try
// Make sure the JdbcOdbcDriver class is loaded
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
// Try to connect to a database via ODBC
conn = DriverManager.getConnection(
"jdbc:microsoft:sqlserver://hu:1433", "sa","");
catch (Exception exc)
// If there's an error, use the servlet logging API
getServletContext().log(
"Error making JDBC connection: ", exc);
public void service(ServletRequest request, ServletResponse response)
throws java.io.IOException
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("<HTML>");
out.println("<BODY>");
out.println("<PRE>");
out.println("The JDBC connection is:");
out.println(conn);
out.println("</PRE>");
out.println("</BODY>");
out.println("</HTML>");

i also have this problem..do u have any solution?

Hey! I recently had to reboot my computer and reinstall itunes. I now want to update my iPad but it is not allowing me to save my apps in my itunes library because it is already connected with my old library from before I rebooted. What do I do?

Hey! I recently had to reboot my computer and reinstall itunes. I now want to update my iPad but it is not allowing me to save my apps in my itunes library because it is already connected with my old library from before I rebooted. What do i do?!

The solution is fairly easy IF the items that you are concerned about are all items that have been obtained from the iTunes Store AND they were all purchased using the same Apple ID. First, with the iPad disconnected from the computer, fire up iTunes. Look to the right side top and confirm that that Apple ID is displayed. If it is not, go to "Account" and log into that ID. Then, connect the iPad. Say "yes" to the "Transfer Purchases" choice. Everything on the iPad will be transferred to the computer's iTunes library.
If anything goes wrong, you can download all purchased items again with no charge (except movies) provided that you use the same Apple ID.
If you have been using multiple Apple IDs, it's a bit more complicated. Post back and we'll go from there.

After updating to Ios6 can not connect to internet on 4G on my 4s, After updating to Ios6 can not connect to internet on 4G on my 4s

After updating to Ios6 can not connect to internet on 4G on my 4s, After updating to Ios6 can not connect to internet on 4G on my 4s

Tap Settings App > General > Reset > Reset Network Settings. Relog into WiFi, see if better. If still problem Restore iPhone with iTunes 10.7 or 11 on computer. See if better. If still problem, and if there is Warrany or AppleCare make Genius reservation and take to Apple for resolution.

TS1363 I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed. Any suggestions?

I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed. Any suggestions?

everytime I try to open the store it endlessly says "accessing iTunes store" but it never opens.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

IMovie can't see my photos from iPhoto anymore after upgrade.

Can anyone help with allowing iMovie to see my photos I have imported previously from iphoto?
After upgrading to the new iMovie i have alot of photos in the project saying 'Missing file, try importing original source media.
They were once all there in a finished project but now are gone.
Any help is appreciated
Thanks

After I import my photos from my phone to iphoto, i always move my pictures to a folder i made in my documents
You realise that this is just wasting space, right?

What can I do if I get an internal power error after upgrading to Windows 10?

QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb again?

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb from the App Store again? My problem is my 4Gb/month allowance on a 12 month contract. I cannot purchase a data block from my ISP and although my speed is theoretically slowed to 64k after reaching my 4Gb, it actually ceases to download in reality.

HI tasclix, it depends what you mean by an OS X boot drive.
If you want a recovery disk from which you can reinstall (by re-downloading) or recover from a time machine backup, then nbar is correct.
If, however, you want to boot and run the OS X installer from the USB drive (so that you don't need to download again), then you will need a copy of "Install OS X Mavericks.app"; see this article:
http://support.apple.com/kb/HT5856
Before downloading again, search your system to see if the installer is still there - it's usually in the /Applications folder unless it has been deleted, but check your whole system for it anyway, you never know, you might still have it somewhere.
Message was edited by: SilverSkyRat

Old emails won't load after upgrade to Mountain Lion

old emails won't load after upgrade to Mountain Lion

See if anything in here will fix it:
1. Hold down the Command and Option keys as you click the iPhoto icon.
The Photo Library First Aid window opens:

Is there a resource where I can see if my older versions of applications will work after upgrading to 10.8 from 10.6.8? I have some older Mac apps as well as things like Microsoft word and Adobe professional.

Is there a resource where I can see if my older versions of applications will work after upgrading to 10.8 from 10.6.8? I have some older Mac apps as well as things like Microsoft word and Adobe professional. I know PowerPC apps won't work, but I can't tell by the version numbers if they are PPC or Intel.

Dr Jack wrote:
I know PowerPC apps won't work...
Restore the ability of PowerPC apps to work: Install Snow Leopard (with Rosetta) into Parallels:
[click on images to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

Help:Can't connect to an old PM9500 from my PB after upgrading it to 10.4.5

Similar Messages

Maybe you are looking for