Help! Can't Export to QT Movie!

Using Keynote 2.0.2 under 10.4.3, I get the same error message no matter which presentation I export (i've tried very simple to complex, self-running to interactive) and under a variety of QT settings:
"Your slideshow cannot be exported as a QuickTime movie.
There's not enough disk space, or there was a problem with the file."
I have plenty of disk space, and I can export presentations as pdf, ppt, flash so my file is ok.
Any suggestions? Thanks.

The easier way to solve the problem is to go into Keynote -> Preferences, choose the Slideshow preferences and place a check beside “Exit presentation after last slide”.
Now it works!

Similar Messages

HELP! : No "Export Audio To Movie" option

Hi
I've just finished a sync project and need to 'export' to movie. When I go to the file menu or right click on the movie track, the "Export Audio to Movie" function is not there.
PLEASE can anybody help. I have to deliver the pitch tonight. I'm running 9.1.3 64bit.
Many thanks
Jules

Mike is right. The reason why Logic9 doesn't have the Export Audio To Movie feature is the current state of Quicktime. Remember that the basic video capabilities of Logic are not written into the Logic code but outsourced to the Quicktime components in OSX (Don't invent the wheel twice). Based on a statement by Steve Jobs, the new Final Cut version should arrive in 2011 and you might think it will be 64bit, dragging QuickTime along with it, followed by a quick Logic update - maybe.
If this helps, here is my current workaround:
I work in 64bit with a separate project file for each music cue on a video based project. When I'm done, I bounce the audio.
Now I have also one master project, that also uses the current video and has the exact (important) sync settings. I use that project to import each previously bounced audio cue. If your sync settings are the same with all the individual projects and the master projects then you can import one or many audio files and with one command "Move to original recording position" all the audio files line up perfectly in sync.
_The advantages of that master project_:
1) You run that project in 32bit mode and therefore are able to use "Export audio to movie"
2) You can make rough mixes of your video (audio against dialog) for approvals or your own reference. Having these little videos with you at the dubbing stage can take prove very easy if the music editor messed up your cue.
3) You can export videos of individual cues, sections or the whole video (at least reels, if the movie is broken down in separate reels)
4) Easy handling/mixing of separate cues that overlap
5) Quick comparison of different versions of a cue which of course are all imported into the master project6)- Quick timing references for Cue Sheet preperation
7) In case of a picture edit, this the master project is also an amazing tool to figure out how messed up your music will be with the new picture cut. Im

Can't export audio to movie

Hi
I am trying to add music to some video footage taken with a digital camera. I was unable to extract the audio from the footage onto my arrange window using import audio from movie. I received a message saying "no active extrac
table audio to be found" (though there is audio in the footage). Then when I exported audio to movie I found that the movie was unchanged, the soundtrack I had created did not play and the original audio remained as well.
Any help would be appreciated.

H,thanks for the advice, I'll try it out tonight. Yeah I bought quick time pro especially to work with film in logic. I am soon to start working on a project with a film student friend of mine. I was literally tearing my hair out for two days figuring I had done something wrong and it turns out that this problem seems to be part of an apple conspiracy to hush up this flaw. That and the fact apple seem barely contactable when there is an issue with one of their problems only adds to the frustration. I expected more I have to say.

Can't export 25 minute .MOV file to .AVI

I am trying to export a 25 minute QuickTime .MOV file to a .AVI file and am having major problems.
The .AVI file I get is about 5.21GB but only contains the first 5 minutes of the video.
I have tried exporting directly from Final Cut Pro and from within QuickTime Pro (both Mac and Windows versions) with the same results. I have even tried using programs such MPEGStreamClip with no luck.
My export settings:
VIDEO
Compression: DV/DVCPRO - NTSC
Quality: Best
Frame Rate: 29.97
Scan Mode: Interlaced
Aspect Ratio: 4:3
SOUND
Format: Uncompressed
Sample Rate: 48kHz
Sample size: 16
Channels: 2
Is there anything I can do to fix this? I need the .AVI and this is a major hassle.
Thanks.
Brian McKechnie

I use the Export > Movie to AVI and then select the settings mentioned.
Going straight from the Final Cut Pro timeline does not work.
Exporting as a QuickTime movie from FCP and then trying to export the AVI from within QuickTime does not work either.
Settings for the QuickTime file that FCP exports:
DV
720 x 480 (640 x 480)
16-bit integer (Big Endian)
Stereo
48.000kHz
29.97FPS
It seems that this only happens on files that are longer then 18 mins. I need the AVI in order to convert the file to WMV in Windows Media Encoder as Flip4Mac Studio Pro HD 2.0.2 exports files with green blotches all over it.

Can I export my itunes movies onto an external hard-drive and then remove them from my computer, but still watch them when I plug in my external hard-drive?

I am running out of space on my macbook. What is taking up the most room is my movies. Can I put them on an external hard-drive and then watch them later after I remove them from my library?

tothatc wrote:
Hello,
I recently purchased a new laptop because my old computer wwent on the fritz. Luckily I backed up my library on my external hard drive. My question is can a) connect my itouch and ihone to my nex computer and b) run my library strictly from my hard drive and not import everything to my new computer?
thanks for the hep!!
On Windows, hold Shift (not alt), launch iTunes and select Choose library... and select the iTunes folder you copied to the external drive.

Help! Can't export DV matte footage without an unwanted background!

I have dv matte blast and it is pulling great keys, but I can't export as a .mov file without getting the background color that I set in properties. I can't find a transparent setting for the background in motion. I have also tried the roundtrip method and I am still getting background when I export to motion and retuen to FCP 5 and render keyed footage. I have FCP 5 crossgrade studio.
Anyone know a work around? Should I export as another file. I looked in all the threads and motion help manual and have come up empty.
Thanks in advance.

unless you're using the animation codec with + colors selected, you're not exporting transparency.
rather than exporting a quicktime movie, you can place your motion project directly in the fcp timeline.

Export audio to movie - not compatible mp4 !

Hi, I thought Logic X would solve compatibility issues with movie files but I can't "Export Audio to movie" with this format:
AVC Coding, 1280 x 720
AAC, 48000 Hz, Stereo (L R)
Logic X seems to do it but spits out files about 21KB small.
Anyone noticed this and knows a solution that does not mean converting the mp4 into a different format? This is terrible, I work with different quicktime files every day..
Thanks folks,
Malte

Hi Anton
This is a known bug in Logic on the intel macs. We're all hoping this will be fixed in the next version!
There are a few workarounds...
bounce the audio for your movie. Open it in Quicktime pro. Open the movie in QT pro and you can join the movie and audio with a bit of trial and error.
Easier perhaps, is to use imovie to import the movie and audio separately and then export the movie from there. That's what i normally do.
As i said, it's a workaround - but it's better than nothing!
Hope that helps
Rounik

Can you download a rental movie from itune and move to an external drive

How can I export an itune movie to an external drive?
If I can download a rental movie and move to an external drive?

Hi Niel. Can you be move specific for those of us not tech savy? 1 - Can you provide steps to back up the library? 2 - How do you organize the library? 3 - When you move the entire iTunes folder, does it include iTunes paid for music along with downloaded music from CDs? Thanks

Export 16:9 .move file with FCP

Hello,
Since May this year I cannot export my FCP 16:9 project to a 16:9 .mov file anymore. The last good one I exported was May 4th, 2009. When I open this QuickTime file with FCP it is widescreen. I exported the same project on May 27th. That .mov file is letterboxed when opening it with FCP.
I never used QuickTime Pro because this program could and can only display my videos letterboxed.
I tried several options to try to export the movie 16:9 (Current Settings, DV PAL 48 kHz Anamorphic).
Someone advised me to use the Cmd-J option in Quicktime, but before May 27th, the export was good and I could use it in iDVD. But since that date it is not possible anymore. When importing the movie directly in iDVD, it is 4:3 format. And after changed it to 1024 with Cmd-J in QuickTime it is halfwidescreen in iDVD (looks like 14:9 i.s.o. 16:9)
How can I get my old good working version of FCP back I had on May, 4th and earlier ?
Or how can I export to QuickTime movie that gives me a 16:9 video again as it was before May 27th ?
Thanks,
Hubert

Hello,
I tried a new 16:9 project. In this new project FCP the video is exported in 16:9 format.
So there must be somewhere a 16:9/4:3 option switch in my old 16:9 project.
Where can this option be set to 16:9 ?
Thanks,
Hubert

Help me publish/export CS3 Flash file as Quicktime Video, no controller

I am working on a simple timeline animation and would like to publish/export my flash file as a quicktime file with out the default controller. I can export it no problem with the controller. Also I tried publishing it as a QuickTime with Flash Track (.mov) and I get this error message. "QuickTime does not support Adobe Flash track beyond Flash version 5. You can however, export a QuickTime move with Flash rendered as video by selecting File > Export > Export Movie.
Also, does anyone know if transparencies are ok if publishing as a QuickTime movie?

QuickTime 7.3.1, and higher, no longer support Flash (.swf) in playback. Previous versions did allow .swf format as a muxed "track" if "Published" from Flash applications as version 5, or lower.
To turn off the controller (none) use the Movie Properties / Presentation tab.
QuickTime does allow levels of transparency and also "alpha channels" in most image formats that support them (.png).

I recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!

i recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!

So it is cutting off the end at 59 minutes? How large is the file that is being exported? You may be running up against a file size limitation.

Can't Export please help

I am having a lot of trouble exporting my final project; I need to export it to a DV tape (North America), and each time i try it comes out slow and choppy on the camera, and always gets frozen on the same image while audio runs till the end. I followed the iMovie help, exporting it to quicktime in a DV format, but how do i get this final quicktime movie onto a DV tape? And is there anything i need to change with frame rates to improve tape quality?
Thank you

Hi to all of you with export to cmcorder problems!
I, too, have had difficulty getting my iMovie to DV camcorder. Sometimes, everything works well, but if my movie is over 60min and I need to change the DV tape in the camera, I cannot get the export to 'Share selected clips' properly.
I have resorted to exporting to QT movie and then reimporting that movie into a new iMovie. If I need to just export the second half, I split the new QT movie into two parts at the place I want to begin recording the second portion. I then move the first part to the clips pane where it will not interfere with my exporting.
(If you choose to go this route but need more free space, you can delete the original movie once you are sure that the QT plays ok).
So far, this process has worked fine.
I think there is a 'bugginess' about iMovie 5 and its versions with the new updates of QT 7. I have never seen such jerkiness, stuttering of video and freezing on video frames. The playhead jumps over my transitions to the next frame or five, as if there is nothing in between. I can only see my transitions if I manually drag the playhead along over them. Thus,I have been unable to view my movies in iMovie after it gets up to over 1 hr. I NEVER had this problem before the QT and iMovie upgrades.
I have found that my subsequent DVDs look great and have no jerkiness. I save all my DVD projects as disc images and preview them in that form before burning. No problems.
I am looking forward to iMovie 6 to address these problems.
I have FCE HD, but have gotten so used to iMovie that I find it quicker for the movies->DVDs that I am doing right now.
I will probably change to FCE at a later time.
My point is that all the suggested 'fixes' don't always work, and until the app is updated and is BETTER, we all just have to try all the suggestions and keep posting so that we can all learn together.

Help me! Audition always failing exports to wav, mov, and Premiere Pro! WHY???

Hello,
I am sound editing and mixing a picture locked 25 min short film. When done with the mix and ready to export the mixdown, the export always takes forever (the project is 12GB large total) I mixdown to stereo file wav, but when I open the file, both VLC and Media Player don't play, with WMP saying its corrupt. I bring the same file into Premiere, and it says that it cannot import "because of a header problem"! What is that? I tried the same with the export to Quicktime (mov) format, and I got the same result. Go up to the window and choose Export to Premiere (you know, directly into Premeire) and it says it it will take 12 hours. I don't remeber cs5.5 taking this long. HELP PLEASE, I need to export this by tonight!!!
Export settings(both formats):
Convvert to 48 khz
Convert to 24 bt (32 with mov; only option)
tried both RF64 and Legacy Chunk whatever
Premeire Pro freindly setting on in Preferences
Windows 7 64 Pro
INtel Core i7 930
16GB RAM
GeForce GTS 250

I don't think a file of that length should exceed 4GB, but be aware that Audition CAN export wave files larger than that due to the RF64 support (vs. 'legacy chunk'), and Premiere can't yet open RF64 giga-wave-files!
Now, other than telling you that this shouldn't be happening, we'll need more information before we can track down what's wrong. Best thing is to detail for us what your export settings are, precisely.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al

Can't export form to fillable PDF or move to online!

I have been messing with Forms Central for the past two hours trying to get my form to export. After reading I assumed it was due to not having a paid version so I just subscribed for the Basic plan and I still can not export anything. The error message I am recieving is the most unhelpful error, "Acrobat.com encountered an unexpected error."
This occurs when I try to export as a PDF or when I try to move it online. I have tried running in Admin mode, updating flash but I am still having no luck! Please help.
EDIT: UGHH my email is my screen name.. Is it possible to change that as well? I don't want a flood of spam heading my way.

In that case I will need more information from you.
What is the version of your desktop version of FormsCentral?
Did you download FormsCentral or you are using the one that came with Acrobat?
After you signed in, did you get an update message? When did you do your last update?
If it is possible, would you mind give me your email address by sending a message to [email protected]?
Thanks
Ken

Help! Can't Export to QT Movie!

Similar Messages

Maybe you are looking for