Help can't open WI tax forms
I can't seem to open the WI tax forms online - I live out of state so is essential that I can open them but they either tell me that I need to download version 9.1 or that there is an Invalid enumerated value: validationState. The fault occurred on line 147524. I have uninstalled my adobe reader, reinstalled an older version; updated to a newer version...pretty much exhausted everything. I was able to open Iowa tax forms online (they did have slight glitch at first but then it worked). Here is a screenshot of what I get:
If anyone can help me I would greatly appreciate it!
nplano
Try to get 9.1 here:
ftp://ftp.adobe.com//pub/adobe/reader/win/9.x/9.1/enu/
Similar Messages
-
help: Can't open "Yellow Submarin" children book(294mb). My iBooks 2 on my iPhone 4S keeps forbidden me for reading it. Saying it exceed fileSIZE limite. Please help me what shall i do?
To be able to read ebooks purchased from the iTunes Store you must have OS X 10.9 Mavericks installed on your computer. That version of the OS contains iBooks, which allows you to read your purchased ebooks on your computer. .
If you decide to install Mavericks make a backup for your computer first, and double the hardware requirements to make sure your Mac can run it. -
Can not open PLLs on Forms Builder 10g
Hi Folks,
everytime I try to open an existing PLL-File via the Forms Builder FileOpen-Dialog I have got the message
PDE-PLI018 Couln not find library
Drive:\Path\LibName.pll
Pressing the OK-Button returns to the FileOpen-Dialog. The selected FileType in the Dialog take effect to the filelist but nothing else.
Note that the file exists and I select it from the Filelist!
About Forms Window shows the following:
Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production
While converting from 6i to 10g it is unavoidable to convert forms and libraries, so please help me!
PS: I can recompile forms with attached libraries if the PLX-Files (6i) are available, but the forms will not work with these PLX-Files.
edited by ths:
I tried to generate a new library. This works fine until I saved it. After naming the library and pressing the save button in the dialog the pll file was created and the same error message appears.
I closed form builder and tried to reopen the library: same error.
I generated another new library and save this by selecting the first new I generated. Jippee! I get the message that the file already exists! I selected "overwrite" and the file was overwritten. After that the same error appears.
How can I (re)open PLL files? It is no solution to generate a new library overwriting the old one everytime some changes should made.
Trying to build the library (Ctrl+T) produces another error:
FRM-91507: Internal Error: Unable to generate library.
Compiling (Ctrl-Shift-K) works fine.Hi Mark,
there's no user except of me on the pc and server (I'm working via rdp-client on a virtual server), no server and no oc4j task or instance started. The one and only program that runs is forms builder. The error occurs if I just try to open a pll file via the file open dialog of forms builder.
With my admins we found that forms builder creates a (temporary) file (e.g. s22o without extension with 827392 bytes) in c:\ but only if I'm the actual user. After I'm getting the permission to create and update files on c:\ forms builder was able to open pll files. Now we're trying to find out why this accurs only on my login. With other users we tried these file was created on F:\ which is the personal drive of the user. I'm only wondering about the fact that temporary files were not created in the TEMP folder defined by the TMP or TEMP environment variable.
So we solved this unusual problem in an unusual way. -
Can I open Payment terms form ?
Hello friends,
I want to add new payment terms through my user defined form
but how can I open the form because this form is not associated with menu item
so i cannot use SBOApplication.ActivatemenuItem("") function
Note:The payment term form can be opened via purchase order form after choosing define new.Hi...
You can use choose from list for payment terms...
for this u have to use document object of payment terms
that is
CTG 40 Payment terms types
and use this code
For this you have to use choose from list method.. this is the sample of code... and set this code for payemnt terms object..
SAPbouiCOM.ChooseFromListCollection oCFLs = null;
SAPbouiCOM.Conditions oCons = null;
SAPbouiCOM.Condition oCon = null;
oCFLs = oForm.ChooseFromLists;
SAPbouiCOM.ChooseFromList oCFL = null;
SAPbouiCOM.ChooseFromListCreationParams oCFLCreationParams = null;
oCFLCreationParams = ( ( SAPbouiCOM.ChooseFromListCreationParams )( SBO_Application.CreateObject( SAPbouiCOM.BoCreatableObjectType.cot_ChooseFromListCreationParams ) ) );
oCFLCreationParams.MultiSelection = false;
oCFLCreationParams.ObjectType = "4";
/// here use have to use object type="40" for payemnts types
//Object type="4" for ItemMaster Data
oCFLCreationParams.UniqueID = "CFL1";
oCFL = oCFLs.Add( oCFLCreationParams );
//Add Column to user data source and then assign the CFL UID to the column.
oColumn.ChooseFromListUID = "CFL1";
if u r facing again problem feel free to ask...and
if get help... please give rewards points...
thanx
deepak -
This issue is that i can not open the form ,I checked the application.log,find erro:
09/04/24 12:21:50.201 10.1.3.0.0 Started
09/04/24 12:21:51.470 formsweb: FormsServlet init():
configFileName: /oracle/prod01/inst/apps/PROD01_erp199/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
09/04/24 12:21:51.479 formsweb: 10.1.3.0.0 Started
09/04/24 12:34:28.975 formsweb: ListenerServlet init()
09/04/24 12:34:30.17 formsweb: Forms 会话 <1> 在启动过程中失败: 没有来自运行时进程的响应
09/04/24 12:34:30.17 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms 会话 <1> 在启动过程中失败: 没有来自运行时进程的响应
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRe
questDispatcher.java:702)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(
ServletRequestDispatcher.java:359)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpR
equestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpReq
uestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.j
ava:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.j
ava:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(Re
leasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
here is another erro :
/oracle/prod01/inst/apps/PROD01_erp199/logs/ora/10.1.3/opmn/forms_default_group_1、formsstd.err
Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declarati
on was not found in application.xml.Thank you hsawwan ,I did it as your methods,and i also checked your thread,but I still have the same problem.
when I start the formserver ,here is the erro:
[[root@erp29 ~]# more /oracle/prod/inst/apps/PROD_erp29/logs/appl/admin/log/adformsctl.txt
adformsctl's LOG:
04/28/09-09:04:52 :: adformsctl.sh version 120.12.12000000.3
04/28/09-09:04:52 :: adformsctl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:55 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:55 :: adformsctl.sh: exiting with status 150
================================================================================
adoacorectl's LOG
04/28/09-09:04:51 :: adoacorectl.sh version 120.11.12000000.2
04/28/09-09:04:51 :: adoacorectl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:51 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:52 :: adoacorectl.sh: exiting with status 150
================================================================================
adapcctl's log
04/28/09-09:04:51 :: adapcctl.sh version 120.6.12000000.2
04/28/09-09:04:51 :: adapcctl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:51 :: adapcctl.sh: starting OPMN managed OHS instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:51 :: adapcctl.sh: exiting with status 150
================================================================================ -
Help : can't open fcp studio pro 2 file in fcp express 4.1.
can't open fcp studio pro 2 (fcp)file in fcp express. just installed fcp express 4 hd upgrade. everything works fine but i was given a fcp file of a sequence created on fcp pro studio 2. when try to open it i get an error message that says "this project is unreadable or may be too new for this version of final cut" - i updated all final cut express software. help!!
That's correct. FCP projects cannot be opened in FCE.
-
Can I open LiveCycle created form on a Blackberry?
I created a form in LiveCycle with expandable fields and other lovely features now our VP is saying he can't open it on his Blackberry. This is a disaster.
Is there any way to get this to work?Yes and no. No in that the integrated PDF viewer for mobile devices do not support Livecycle (XFA) PDFs. Yes in that Adobe does have additional platforms (see link below) for viewing and entering text fields for mobile devices. However I sense that you lack these options so I might suggest, if you have the software, to create a PDF with either Acrobat Pro or you can use Adobe's new FormCentral which might be included in your version of Acrobat Pro if you have it. Both have options for optimizing PDFs for mobile viewing; however you might be somewhat limited with the other features you have made in the form. But at the end of the day Acrobat created forms, for the most part, can be viewed on mobile devices. I have a somewhat limited expereince with the integrated PDF viewer in BB so I am not 100% sure if all features like expanded fields in an Acroform would work.
http://www.adobe.com/products/livecycle/mobile.html -
Preview and Safari can't open dynamic PDF forms
I had no issues with dynamic PDF forms under OS X 10.6.8, Safari and Preview could open them without a problem. With Lion it is no longer working, Safari and Preview can't open these files, I need to use Adobe Reader or Acrobat.
I just don't like Reader handling PDF's in Safari and now I have no choice until someone or Apple comes with the fix.Either someone has installed a client side cert into Safari or the site in question has let their SSL cert expire. (not your fault). You could try using Firefox or Chrome instead.
-
Need help can't open existing itunes
Today I had to completely restore my pc to it's original settings. I have an itunes account but now I cannot get any of the music or audio books that I had in there. Is there a way to get my stuff back or am I out of luck?
Marc & Others,
I'm having the exact same issue, but know when it began. I changed the default language by going to the 'International' section in System Preferences and selecting the language -- French in our case (my wife is French, easier for her to navigate some apps). The moment I did, all icons from my desktop were wiped and I can no longer get into System Preferences.
Same other issues occurred as you noted below - bouncing icon but nothing happens, can't change date/time, can't open finder. All language setting are in French though ...
I tried going to user/library/preferences/ and removing the files you noted below, but can't access them -- they're greyed out.
I'm at my wits end ... this problem seems to be common as I've seen several listings for it, but your the first who seems to have solved it. Can you, or anyone here, help?
Thanks in advance! -
Help - Can't open Adobe files, after expiration of Adobe pro free trial
I had a 30-day free trial of Acrobat 11 Pro, since the free trial expired a few days ago I can't open Adobe files. When I try to open them a pop-up box appears telling me to buy Acrobat 11 Pro...when I decline, it automatically closes Adobe
I want to read files with just basic Adobe reader (not Acrobat 11 Pro) and I don't know how to make it my default
Do I need to purge Acrobat 11 Pro? (I'm using Microsoft OS)
Thanks!Use the Adobe Cleaner to remove Acrobat and Reader COMPLETELY: http://labs.adobe.com/downloads/acrobatcleaner.html
Download the offline Installer to reinstall Reader: http://get.adobe.com/reader/enterprise/ -
Hi, there!
Can anyone tell me what it means when Mac the Ripper says, Can't Open IFO!
Is there another dvd ripper for mac's other then Mac the Ripper?
I've tried HANDBRAKE but it is NOT as friendly as Mac the Ripper and I can't seem to figure it out. I'm only ripping the first 5min etc. of a dvd OR ONLY the main page.
If anyone has any suggestions... I'd appreciate it!
THANKS!Hello honey20jb,
Welcome to the Community,
Is your device got wet recently ? If yes then have a look at this link and try to follow what ever it says. Got Your BlackBerry Wet
And after that try to reload your OS by force detection here is How to force the detection of the BlackBerry smartphone using Application Loader try it and let us know.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Help : Can't open /dev/rdsk/c0t0d0s7
Hello,
I have a Sun Blade 150, with SunOS 5.8.
And I had a problem with my disk, and now when I reboot it says:
/dev/dsk/c0t0d0s1: I/O error
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c0t0d0s7: I/O error
Can't open /dev/rdsk/c0t0d0s7
/dev/rdsk/c0t0d0s7: CAN'T CHECK FILE SYSTEM.
/dev/rdsk/c0t0d0s7: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
WARNING - Unable to repair one or more filesystems.
Run fsck manually (fsck filesystem...).
Exit the shell when done to continue the boot process.
When I run FSCK I checks /dev/rdsk/c0t0d0s0 OK, and then say's Can't open /dev/rdsk/c0t0d0s7.
I don't have any backup of this, is there a way to fix this?
Thanks,
JSHello,
It first happened this: http://forum.java.sun.com/post!reply.jspa?messageID=9460392
Then I use the SunOS install CD to use format to get the label backup, and now the system boots-up, and shows that errors.
Its only missing the SWAP (c0t0d0s1 and c0t0d0s7).
/etc/tab:
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/dsk/c0t0d0s1 - - swap - no -
/dev/dsk/c0t0d0s0 /dev/rdsk/c0t0d0s0 / ufs 1 no logging
/dev/dsk/c0t0d0s7 /dev/rdsk/c0t0d0s7 /export/home ufs 2 yes logging
swap - /tmp tmpfs - yes -
prtvtoc /dev/dsk/c0t0d0s2:
dimensions
512 bytes/sec
255 sect/track
16 tracks/cyl
4080 sect/cyl
38309 cyl
38307acessible cylinders
flags:
1:unmountable
10: read-only
partition tag flags first sector "sector count" "last sector" mount directory
0 0 00 0 156292560 156292559
2 5 01 0 156292560 156292559
Thanks,
JS -
Mac Users can't open Windows 9Pro form
I created a dynamic form using Acrobat 9 Pro which was finally working correctly until this quarter when we had a few MAC users try to access it from our website. After installing the most recent version of Acrobat Reader, they got a "Please wait" then the following message.
If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html.
For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
At no point were they able to read the actual form. Is there something I need to change in the permissions or compatibility. Any help would be great, as I've invested a lot of time in the form already.Can you post a link to the form so we can give it a shot?
There IS the possibility that their machine is trying to open the form in Preview or does not have PDF's associated with Reader but it's hard to say without seeing the form.
If you cannot post a link to the form, you may want to have one of them try down.oading the PDF then opening Reader and using File>Open to open it. It could also be their browser PDF plug-in that isn't working. -
Tried to open a form in pdf but it keeps telling me to install the latest version to see it. I had already installed it so i uninstalled it and installed it again but it still wouldnt open. Pdf files are also set to open with adobe and i have no problem opeining other pdf forms.
Any help would be great thanks?I have recently been updated to ES4 and upon completion of a simple edit to a ES3 version of a form - emailed PDF version of blank form document to myself.
Mobile device iPad and iPhone Exchange Service and Gmail clients / OWA / and PC based Gmail Web Clients all display Please Wait... image inserted to this reply.
Note: Immediate work around on PC is simple - save file and open via local Windows Explorer (MAC file explorer) view of file with Adobe Reader or Pro and form appears unchanged.
This does however leave more mobile customers customers confused.
I could not in any manner get the file to display as anything but the image here on my Apple devices , even with iBooks and the Adobe Reader 11.6.0 (98775) tool.
All other PDF files I have sent to these same clients are readable - so this must me relative the LiveCycle Designer file formating of the pdf file in XML.
This was simple to check - New form , use blank , save - Untitled1.pdf Adobe Dynamic XML form (*.pdf)
If the document is save as a Static PDF form there is no display issue....
Please advise -
Help - can't open a fla. file
I have created a fla file and I was working on it today when
flash crashed and since then every time I open that fla file, flash
crashes again! any ideas? I have been working on this file for more
then a week and I was just about to finish it!!! HELP!Don't mean to sound bad but you should have backed up your
file during the week, also save as new file with V2 at the end of
name just so that if it gets screwed up you always have the other .
In terms of fixing your file, have you tried opening another
fla file and seeing if it is just flash prog that has a problem and
not file. Also if possible can you try opening the fla on another
computer?
jon
Maybe you are looking for
-
Error while Creating a PO using BAPI_PO_CREATE1
Hi Friends, The following issue that I have observed and as explained below is one of the weirdest scenarios that I have seen while working with SAP. Hence, kindly help me with possible errors from my end. I am working on ECC 6.0. Requirement: T
-
No email client since FF 5 upgrade no matter what I do to try and fix it I can't get it back
my default email will not work, can't click on email links on websites, "send link" does not work. I have all my outlook settings set correctly. This all happened since upgrading to 5. FF also uses 100% of my CPU to open, before i even open any tabs,
-
I keep getting a pop up that says "uninstal set" every time I do anything and at startup
I removed the previous version of firefox and when 4.0 was installed I started getting the popup at startup and when I move from one place to another on firefox
-
I left my ipod charging over night (did not sync), and when I grabbed it this morning the touch screen was unresponsive and not working. I tried doing the power and volume down reset, but nothing changed. All the buttons work fine, but without a work
-
Active sync sendMail command throws 103 status code
Here is my post request data : <?xml version=\"1.0\" encoding=\"utf-8\"?> <SendMail xmlns=\"ComposeMail\"> <ClientId>%d</ClientId> <SaveInSentItems/> <Mime>From: [email protected] To: [email protected] Subject: hello MIME-