HELP ! Can't render 1080x1920 FLV in AE CS5

Hello
I'm trying to render an HD clip at 1080 x 1920 FLV. Its for a 42" HD monitor that will be displayed like a portrait. Everytime I try to render it has constraints and I can only do 1080x 1080. Is there a possible way around this? I even tried rendering it as an avi and opening it up in Premier as well as Adobe Media Encoder, NO such luck..
Please help!  Thank you..

This animation is for a normal monitor that will be rotated 90 degrees, correct?  You don't want 1080x1920, you want 1920x1080.
It's certainly possible to work in a 1080x1920 comp to make life easier on yourself, but eventually the video will be 1920x1080.
You'll need to find out if they're rotating the monitor clockwise or counterclockwise, nest your work in a 1920x1080 comp, and rotate the nested comp appropriately.

Similar Messages

  • AE CS3 can't render to FLV

    I have Flash CS3 purchased and installed and I'm using a trial of After Effects CS3 to try to make an FLV with cue points.
    The problem is that when I add my project to the render queue, I find that the option to render to Adobe Flash FLV format is not in the drop down list.
    Can someone tell me why?

    I think those are extra encoders that aren't included in the demo. Have you tried File > Export > FLV?

  • Help Can't render with active camera

    When I render a video with the active camera, all I see is the whole canvas, instead what the camera should see. What am I doing wrong? Did I set the camera incorrectly or something?
    Thanks for your help ^^

    Never mind, I just found it was a problem with the scale and not the camera itself.

  • Adobe Media Encoder can´t render out AE Ray-Trace Composition

    Hey,
    AME can´t render out my composition (or sequence if i include the comp in a PP sequence) which includes some 3D stuff.
    I am able to render it out in AE in a few minutes, preview it easily in AE and even in PP but i´m not able to render it out in AME or PP.
    AME says it would take like 10+ Hours to render it and doesn´t come to an end.
    I tried multiple encoding settings but nothing worked.
    Also i checked, that cuda rendering is enabled in all my Adobe programs, but nothing helped...
    AE File .aep :
    Dropbox - Twitch Infovideo.aep
    AME .epr Preset for encoding :
    Dropbox - Media Encoder Error Test.epr
    Thanks for helping,
    Johannes

    It raises another question: what settings do I need to encode the comp in 720p resolution without taking up lots of space?
    Well, it depends on whether you need a production master (something for broadcast, for example, or to use as a source for other encoding tasks) or if you want a version for distribution. If it's the former, there's nothing wrong with "lots of space" - A Quicktime file with PNG or Animation codec is a good idea, but it will take a lot of space. If it's the latter, H264 is perfect but there's no built-in preset to take 720 material to the web.
    You could do this:
    * Pick the generic H264 template. You'll see that it will give an error if you attempt to render, because the default setting uses an H264 profile/level which doesn't let you use HD resolutions.
    * In the H264 video options, set the "Profile" menu to "Main" and "Level" to 4.0. That will keep it compatible to Quicktime and Flash player, while allowing larger frame sizes and higher bit rates.
    * Set Target Bitrate to 5-8 Mbps and Maximum Bitrate to 9-10 Mbps if you're targetting web delivery. That's a bit over what Apple uses for 720p content on the Apple TV, for example.
    The H264 original preset will instruct you in the comment field to stretch to 640x480 in Output Module. There's no need, since you are using a profile/level combination which allows higher frame sizes.

  • How can i render one facet in panel splitter based on conditions?

    Jdeveloper Version - 11.1.1.5
    How can i render one facet in panel splitter based on conditions?
    Ex : In horizontal Panel splitter first facet - af table
    second facet - af table
    if any one table estimated row count is zero i nedd to render the respective facet?
    is it possible?
    Please help..
    Thanks
    sk

    Yes you can do it but not on facet you can apply rendered attribute to the any of the child component of the facet.
    Thanks
    Raghav

  • Can I zoom the flv video playing in my swf?

    Can I zoom the flv video playing in my swf?
    Hi,
    I have a FLV video that is linked from my SWF file (It plays inside a flvplayback component in my movie). I'd like the flv to zoom (as it's playing) when the User mouses over it. Is that possible? I've been able to 'Create a Motion Tween' on it so that it plays in editing mode but when I preview it, the flv just stays the same size.
    I've been doing this zooming with symbols/shapes (using the 2d-zoom motion preset) but I'm wondering how I would do this on a flv. I need the video to be playing as the transform changes so I can't just zoom an image that looks like the video and then swap it for the real video when it gets actual size.
    Thanks for any help.

    Thanks Kglad.
    I found a good step by step explanation of this process by Somascope (you need to make a movie clip out of the flv playback component to actually tween it):
    http://forums.adobe.com/message/3481842#3481842
    also here is some documentation:
    http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/fl/trans itions/Tween.html

  • How can I render an active link (yrl) within a UIX/XML page

    How can I render an active link (url) within a UIX/XML page.
    How can I get <jbo:ShowValue> to work in UIX/XML, or is there another way?
    Bill G...

    It may seem strange, but the <contents> of <rawText> aren't actually
    raw - it's only the "text" attribute that's raw. (It seems strange because
    it is. Ah well.) This is different from UIX JSP.
    So, try something like the following:
    <bc4j:attrScope name="Notes">
    <contents>
    <rawText text="&lt;a href=&quot;"/>
    <rawText>
    <boundAttribute name="text">
    <bc4j:attrProperty name="value"/>
    </boundAttribute>
    </rawText text="&quot;&gt;"/>
    Some text in the link.
    <rawText text="&lt;/a&gt;"/>
    </contents>
    <bc4j:attrScope>
    Thankfully, this will be much simpler in 9.0.3, when the following
    will work:
    <link text="Whatever you want">
    <boundAttribute name="destination">
    <bc4j:attrValue name="Notes"/>
    </boundAttribute>
    </link>

  • Can Lightroom render 1:1 Previews when importing my Photos?

    Q: Can Lightroom render 1:1 Previews when importing my Photos?
    FAQ revised 25 April 2009
    Ans: Prior to version 1.3 Lightroom did not support 1:1 preview rendering during import, the actual options for  Initial Previews being:  Embedded or  Standard. However, more recent versions allow four types of previews to be rendered during import (i.e.  Minimal, Embedded & Sidecar, Standard,and  1:1). It's also worth noting the following on Lightroom import behaviour: 
    1.  Minimal (Lightroom default) or Embedded & Sidecar is by far the quickest method for getting your photos into the Lightroom catalog. However, the lack of Standard, which is the minimum that Lightroom can actually work with, means that the application will render standard-sized on demand (i.e. as thumbs/photos become visible within the photo Content area). Asking Lightroom to undertake this task at the same time as you're trying to use the application will result in sub optimal performance. 
    2. Importing your photos with the  Standard preview selected within the Import dialog will take longer than 1 above, but on completion Lightroom will already have previews that match the minimum requirement for working in the Library. Assuming that you won't be looking at every image at 100% (i.e 1:1) then this preview size will allow you to quickly review, rate, label, even make quick colour/tone adjustments, etc the photos within the Library module. If you need to see a photo at 100% then Lightroom will render that preview on demand (while it's being rendered you'll see the "Rendering Preview" overlay appear at bottom of preview).  Note that when using a 23" or larger monitor it to is best to set the Standard sized previews so that they are rendered at 2048 pixels
    3. Importing your photos with the  1:1 preview size selected will result in Lightroom taking even longer to complete the import process than would have been the case if standard-sized had been chosen. 1:1 previews also take up significantly more disk space than standard-sized.
    If you're not going to be working on the photos immediately after import but do need to get them into Lightroom as quickly as possible, then the best option would be to choose import option 1. Once the photos have been imported choose either  Render Standard-sized Previews or  Render 1:1 previews from Library module Library>Previews menu.

    When I search these forums for "CFCopyFormattingDescription", I find a bunch of crash reports posted that look almost exactly the same as mine.  It appears there's a bug in iPhoto, perhaps when reading metadata from the JPG file (readRawTiffPropsFromPath).
    Interestingly, the Preview app can open and display the file just fine.  I even opened the inspector and it showed all of the TIFF and exif metadata just fine, no crash.  The file also opens just fine on Windows.
    Now how do we get the attention of the iPhoto development team so I can send them the photos, have them reproduce the crash, and fix it?

  • Please help: Can't download itunes with windows 7 (64 bit).  Keeps freezing at 99%

    I have tried deleting and re-installing itunes and quicktime but it still won't work.  Please help.

    Can someone please respond to my request for support?  I tried the provided correct answer at https://discussions.apple.com/message/11561783#11561783  but it did not work. 
    I also got a MSFT tech support person to remotely look at my machine, for what its worth, he said the registry file is fine and to contact Apple support.
    Any help would be very much appreciated.

  • Hello I Download Adobe Photoshop CC 2014 Last Night i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message I Need Help Can You Resolve This Problem i Tried Creative Cloud Sign Out Nd Sign iN But iT DidnT ReSolve My

    Hello I Download Adobe Photoshop CC 2014 Last Night
     i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
    I Need Help Can You Resolve This Problem

    Lotfi are you receiving any error messages during the installation?  I would recommend reviewing your installation logs for errors.  Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.  You are welcome to post any specific errors you discover to this discussion.

  • Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could

    Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could not complete your request because of a program error". Have thought about re-installing  it but I have lost my serial number.  I'm living in Ireland and trying to get to talk to someone in tech support is a complete joke. Any ideas what to do ? Thanks

    Ianp69549740 have you tried reinstalling Photoshop CS5.1?  If so do you receive any specific errors?  What operating system are you using?

  • CS5 quicktime "MooV" error - can't render or preview...

    Hello everybody,
    I'm working on a project with a imported quicktime movie file. The file works just fine in quicktime player.
    But... when i try to render the project from AE CS5 i get this error:
    Rendering error while writing to file "/Users/etc....
    An output module failed. The file may be damaged or corrupted. (-1610153464)
    I also get the error saying this type of "MooV" file is not supported.
    But like i said it's just a regular quicktime movie....
    I allready tried the following:
    - re created the quicktime movie from AE CS4 - with different codecs (photo JPG, lossless, animation) all giving the same result
    - trashed my AE CS5 prefs
    - purged everything
    - restarted my mac and AE
    playing the quicktime movie in AE CS5 in the footage window causes AE to crash....
    I'm running mac os 10.6.3
    latest version of quicktime
    Anybody had the same issue?
    Only solution i can think of now is start over in CS4.....
    Cheers,
    Tony
    Edit - OK i restarted for the second time and now everything seems OK....
    Message was edited by: TONYWORKS-NL

    The problem is that adobe after effects cs5,
    is running at 64 bit and using a 32bit quicktime, this cause
    a conflit. An easy way to solve this problem is simply installing itunes 64 bit
    have fun

  • HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

    I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
    "The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

    Try Perian.
    http://perian.org/

  • TS1702 Hi, I getting a "playback error message" on youtube App. I tried to reinstall the app and to reset and restore the device and all these things didn't help.can you please help me

    Hi, I getting a "playback error message" on youtube App. I tried to reinstall the app and to reset and restore the device and all these things didn't help.can you please help me

    That's a peculiar one to get in the context of a QuickTime uninstall.
    Which particular version of QuickTime for Windows are you currently running? (7.7.5, 7.7.4, something earlier?)

  • I have update to FCP7 and now I can't export as FLV

    Hi,
    First sorry for my bad English, this is not my mother tongue.
    My problem is the next,
    In my PowerMac with FCP6, Flash8 Video Encoder, Flash8 and Quicktime Pro 7, I use to export without problem from FCP as FLV by File / using Quicktime conversion...
    Now with my new MacPro with FC Studio (FCP7, etc) and with the upgrade to Adobe Creative Suite Master collection, I can't export as FLV directly from FCP.
    Please do I need something else?
    Export my videos to FLV files is something that I have to do all the time, almost the 90% of my production finish as FLV.
    Any idea, plugin, codec or something??
    Many thanks in advance

    This might be of interest: http://discussions.apple.com/thread.jspa?threadID=2275890

Maybe you are looking for