Help! Can't resize layer in Elem. 9!

Hi! I need this immediately. I've opened a background in elements 9 & have opened/inserted a jpg layer onto it. Need to enlarge this jpg on the background, but when I try it changes the size of the "canvas" background. I'm desperate. Any solutions?!
MANY many thanks! Please email me here: [email protected]
Kristen

Thank you SOO SO much! For now - for this urgent project - I've saved what I got earlier to web then opened it in my mac iphoto & cropped the border - so that the image is larger than the border. Went at it from a different angle to get the same effect.
This is good to know for future! Many thanks! And wishing you a WONderful Day!
Kristen
http://ExploringSacredSpace.com

Similar Messages

  • I can access resize screen bar in the lower right. It extends off screen. Please help?

    I can access resize screen bar in the lower right. It extends off screen. Please help?
    Irene

    Have you tried the resize button in the window corner upper right.  There are 3 buttons one closes the window one minimizes it without closes it and the other one toggles between full screen and a smaller screen.  Click the last one and see what happens.

  • Hello all together  I have problems uploading photos in Illustrator CS6.  I can not resize it free.  can someone help me there or tell me where I have to apply?

    Hello
    I have problems uploading photos in Illustrator CS6.
    I can not resize it free.
    can someone help me there or tell me where I have to apply?

    Steve,
    I did say, and mean,
    I rustier in German than Steve may be ~ I may be rustier in German than Steve.
    inspired by the German word order, or the little green guy with the long ears, or something.
    French is quite a bit further down my language list (limited to small bits), the main source of understanding/recognizing being the corresponding loan words in English.
    At least some years ago I could read and understand all the half/full page German sentences effortlessly, but even then I was banned from helping our kids with any German homework.

  • I can't resize the text adding to photo in PhotoShop Eleements 10. The size is set at 6 points but looks huge on screen! (200 points ) Help!

    I can't resize the text adding to photo in Photoshop 10.   The size is set at 6 points but looks more like 200 points. Help!

    Good day!
    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements
    but remember to mention relevant information (like the image’s resolution for example) and maybe post some screenshots to illustrate the issue.
    Regards,
    Pfaffenbichler

  • How can to resize an image uploaded in to the smart image

    Hi
        I have an image uploaded into the smartimage from the local file system. How can i resize this file or create a rendition for this image?
    Thanks
    Veena

    Hi
       I got a reference for the same question from Stack Overflow http://stackoverflow.com/questions/14726485/resize-an-image-resource-in-cq5/16728970#16728 970
    I tried the same method
    Resource resourceNew = resource.getResourceResolver().getResource(img.getFileReference());
        Asset asset = resourceNew.adaptTo(Asset.class);
        log.error("asset ****" + asset);
        Layer layer = new Layer(asset.getOriginal().getStream());
        layer.resize(200, 200);
        log.error("layer ****" + layer);
                            Image image = new Image(resource);
        String mimeType = image.getMimeType();
        ByteArrayOutputStream bout = null;
        ByteArrayInputStream bin = null;
        try {
            bout = new ByteArrayOutputStream(2048);
            layer.write(mimeType, 1, bout);
            bin = new ByteArrayInputStream(bout.toByteArray());
            asset.addRendition("resizedImage", bin, mimeType);
    log.error("asset Bin" + asset);
        } finally {
            // close streams ...              
    Where img is my Image object and I was able to create a rendition in the dam.
    But the rendition I am getting is in File format. Is there a way by which i can change it to png format??? any Help will be appreciable..
    Thanks
    Veena

  • Adobe Acrobat Pro 9.4.6 Sticky Note Icons are huge and can not resize

    My coworker is having a problem with the size of the Sticky Note (comments) Icon.  It is huge and we can not resize.
    When you open the icon, it takes up the whole page.  We can change the Font size, but the actual icon will not resize.
    The same document opened up from someone else, the icon views normal. We all have Adobe Acrobat Pro V9.4.6.  Any suggestions on a fix?
    Thank You.

    JimJSC,
    Your reply also helped fix a problem I had with not being able to resize sticky notes. My original display resolution meant that the resize symbols in the lower corners of the sticky note weren't accessible. In Acrobat X, the setting is under Acrobat, Preferences, Page Display, Resolution.

  • I have Adobe Photoshop 9.  I am a novice.  How can I resize photos in my files using batch resize?

    I have Adobe Photoshop 9.  I am a novice.  How can I resize photos in my files using batch resize?

    In the Editor, use File...Process Multiple Files.  See the Help for more info.
    Ken

  • Can I resize pages in Acrobat?

    Hi,
    I'm in a rush to get my graphic design portfolio requirments done for my portfolio class at VCU.  Please help if I don't finish it I don't graduate with my BFA!!!  Ok I am over exaggerating but if I can resize this in Acrobat Pro it will save lots of time and I'm going insane from all the stress.
    I have to resize all my portfolio pieces so they are within an 8 1/2 x 11 page format.  My current pdf portfolio has all my pieces at all random sizes. I have about 39 pages some are horizontal magazine layouts and some are vertical posters.  So when I resize everything will be on a page with some white space depending on the page.  I can go into indesign and do this but that will take hours cause of importing large files.  If I could just resize in Acrobat Pro (I have 9.1) I could be done soon.  If it can't be done then I'll just have to do it the hard way, but I need an answer asap.  I can't find anything that helps on the net.
    Or if I can't resize my pages in this program does anyone have any suggestions as to how I may do so quickly?  Anything to avoid importing page by page into indesign...  I have the full adobe CS4 suite so I can work in any of those programs or if there is some free program that will work too.
    Thank you!

    Apparently,  you can't do it in Acrobat 9 .2 anyway. (Make /Print a Pdf from a Pdf or re-fry)
    The to do it, use to be, was you make your correction, (example to make a permanent crop) was that you desire the either go to apple's Print to PDF or use AdobePDF printer.

  • Can we resize and change the background image in a 2 page layout?

    I am a two page layout report in RTF. Can I use different background image on page 1 and page 2? The first page background will not be repeated but the second page will. Also, it seems when we insert a background image by going "Format -> Background -> Fill effect -> Picture", after we finished the whole process we can't get the background image to fit with the page, can we resize it to be fit with the page? Thanks for your help!

    Yes.  Select the image and go to the Inspector/Hyperlink/Link pane and use the Link to One of my Pages option.
    Remember: the photo must be added to the page by dragging it onto the page and then be selected.  It can't be added as a background image with the Inspector/Page/Layout pane.
    OT

  • Can I resize a Quick Selected image so it fits when I cut and paste it on a different background.

    Can I resize a Quick Selected image so it fits when I cut and paste it on a new background? I am trying to take a photo of someone and place it on a different background. The Quick Selected image is too big when I paste it on the background. You can only see a small portion of the persons head.

    Open the photo, then go to Image>resize>image size. Read what the resolution is in px/in.
    Get out of this screen. Then use one of the selection tools to select the person, go to Edit>copy to put it on the clipboard
    Now, go to File>new>blank file. Enter width & height, and the same resolution value.
    Go to Edit>paste. The person will be on a separate layer. Use the move tool to position, and, to resize with the corner handles, if necessary
    Note: For printing, it is desirable to have the resolution in the 240-300px/in range. For web work, 72 px/in is ok

  • Can't select layer mask, also some tools not working -- in CS2

    Photoshop 9.0.2 on WinXP Pro (3 GB RAM; Used space: 18.4GB; Free space: 214GB; Video card: 256MB ATI Radeon X1300PRO)
    Hi, I have a couple image layers (each created by merging several others) that each also have a mask attached. I cannot get the layer mask selected on either one. I have found that I can delete the layer mask, and start with a new one and make edits, but it is a one-time shot: once I de-select it I cannot get back to it to make any further changes. (I have only a standard mouse, not a Wacom tablet/pen mouse, nor does anyone nearby, or perhaps even in the building. See: http://www.adobeforums.com/webx/.3bbfe832 )
    Also, when I have the layer selected and try to draw on it (in black) with the Brush tool, it paints red. Then I was able to Erase the red brush strokes just a minute ago without disturbing the integrity of the image. However, I just tried it again and more red was painted onto the image layer (in the currently assigned size of the Eraser).
    Incidentally, yesterday and this morning I couldn't get the Eraser tool to do *anything* at all.
    Everything I *can* do does show up in the History palette.
    I also just happened to notice that when I select any layer in the doc that the small frame appears around the thumbnail to indicate it is selected, but that the entire row itself does not become highlighted as it normally does. And when I check the eye to make the layer disappear, the red brush strokes (both from the Brush and Eraser) still show.
    I generally work on a network, but after I started having these problems I moved the file to my desktop and have worked from there since early yesterday with apparently increasingly odd issues. I have a co-worker who experienced the same inability to select the layer mask a couple days ago, but his system has since returned to "normal" (and while continuing to work across the network). Thanks!

    >, but obviously need to brush up on the details.
    you really should. imo, the quick mask is one of the best and most flexible selection tools available in photoshop! you should either check out the help on it (F1) and/or google for some tutorials.
    I set mine (double click the quick mask icon in the tool bar) so that painting black paints a "selection" rather than a "mask" (painting white clears the selection). in that way, the quick mask tool in effect becomes a quick selection tool that can take advantage of all your various brushes and brush effects (opacity, flow etc.) when making or adjusting selections.

  • Since I've updated, I can't resize rectangle shapes.

    Since I've updated, it seems like I can't resize rectangles or rounded edge rectangles any more.  The bounding box isn't even present, only the nodes for rounding the corners.  This only seems to be happening for the rectangle shapes, ellipses and other polygons are unaffected.  Did they change something, and this is a feature, or is it a bug?
    I've tried restarting and all that, this is happening consistently across many files.  Help!

    Object > Shape > Expand Rectangle
    or use the free transform tool
    For the benefits of live shapes see here:
    Illustrator Help | Live Rectangles and Rounded Rectangles

  • Can't delete Layer Mask content in PS CS4.

    I am completely baffled with this and am thinking that it's something obvious I am just missing.
    I have a photo open and click on the "Create new fill or adjustments layer" button at the bottom of the Layers panel.
    In CS3 I able to create a layer (say Levels) and apply it, then select the eraser tool and delete sections of that adjustment layer that I did not want revealing an unaltered section of the original photo behind it.
    I can not seem to do this in CS4. I can add the layer and select the eraser tool but it will not delete anything.
    :s Help??
    Thanks.

    >You have to make sure and explicitly target the Layer mask in order to affect it.  <br /><br />good point. make sure the mask is selected first. :)<br /><br />>CS3 has buggy targeting behavior<br /><br />really? i don't think i've ever noticed it. <shrug>

  • How can i resize my banners on my website without quality lost?

    Hello,dear adobe members i have a question for you and i need your help.My question is that how can i resize my banners on my website without quality lost?I want bigger place for my banners but i do not know how to do it in cs6 .here is review of my banner you can check from that adress http://www.remeto.com.tr/  on home page at the top.From now thanks for your comments.Best Regards Remeto.

    Sorry, but I don't understand.  This is the only banner, but is scales up really nicely.  Are you sure you are not just fishing for page views?

  • Can't resize Mac partition in Disk Utility

    I'm having issues by being unable to resize my Macintosh Partition to establish more space to extend my Bootcamp partition. All the settings are greyed out with no toggles to change to capacity. Please help!

    1. Do not use Disk Utility to resize Bootcamp partitions. From Boot Camp 5.1: Frequently asked questions - Apple Support
    Can I resize the Windows partition after installing Windows?
    No. Back up your important files, then use Boot Camp Assistant to delete the old partition and create a new one.
    2. If you are on Yosemite, the GUI Disk Utility is broken for manipulating CoreStorage volumes. You can check if you have CS, by looking at the output of
    diskutil cs list in Terminal. The only reliable method is to use diskutil cs verbs.

Maybe you are looking for