Help -can't start up after uupgrade and 'internet cleanup' install
I've got a problem... trying to remember how my installs went, but recently installed 10.5.4 and shortly thereafter a smith micro product called internet cleanup. in addition, during the restart, the air conditioner for our upstairs (computer / exercise room died and at 85F or so, returned to find the fans running full blast and the international "NO" sign in place of the gray apple at startup.
I am unable to start up at this point and don't know why. I have run disk utility and repaired 1 permission, no joy, and ran disk warrior last night and still can't start up. OS cd and DW see my drive ok and perform tests and repairs ok, but still can't start up.
if anyone has a recommendation, I'm all ears. I'm ready to start unplugging any peripherals, open the case, and unplug memory, not knowing what else to do.
thanks in advance,
macles,
les owens
bath, nc
Get a UPS 1500VA for your Mac Pro.
I would be surprised Smith is 10.5.x compatible, why not look at Onyx or Leopard Cache Cleaner, or just manually clean out ~/Library/Caches/
Resetting the SMC (button for pre-2008, leaving unplugged for 2008 model).
http://www.apple.com/support/macpro/
Obviously first, if DW repairs your drive and you are running 10.5.4, you have another disk drive and can boot, no?
Backups and cloned system?
Else, start installing and setting up a new OS boot drive. Later you can try to merge or migrate and salvage files and applications.
Note some of the comments on this Internet Cleanup 5.0
http://www.versiontracker.com/dyn/moreinfo/macosx/19900
Similar Messages
-
The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do? When i go to the camera, it is stuck on a black screen. the only way to use my camera is through other camera apps, but if I try to switch it to the front camera, it freezes again.
If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required. You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty
-
there are 6 updates to be made with my system and they start but after downloading and rebooting it always says that non could be installt because of an mistake, but no help, no number, no possibility to chose from...
Do you get an error number? What is the exact message?
Two things to try.
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder. Delete com.apple.appstore
- Launch the App Store.
If that doesn't work, try an App Store reset and then try again.
App Store Reset Learned from Old Toad
There is a contact link.
App Store Support -
Can't start Tomcat after installing Bea WorkShop for JSP
Hi,
I have been using Eclipse SDK Version: 3.1.2 Build id: M20060118-1600 and Web Tools Project 1.0.2 and Tomcat 5.0 and Tomcat 5.5 for about 2 months with no problems. But now I Can't start Tomcat after installing Bea WorkShop for JSP plug-in. I get "Server Tomcat v5.0 @ localhost failed to start". Any help would be greatly appreciated.I installed BEA Workshop for JSP Version: 3.1.0
Build id: 536. I only wanted to install the plug-in to my existng Eclipse 3.1 / WTP application. The only option that I saw was to download the entire FullWorkshopFreeInstall-536.zip, which is 192,496 KB. During the installation, there is a screen that you can specify to only install the plug-in - and I selected that option. Today, I chose to uninstall the BEA Workshop for JSP and then I was again able to start Tomcat server. I then did a complete install of BEA Workshop for JSP into a totally separate location. My original Eclipse installation still works fine, but my Workshop for JSP Version (which is now a completely new installation) has the same problem with Tomcat that I reported with the plug-in. I am using j2sdk1.4.2_08 and have tried both Tomcat 5.0 and Tomcat 5.5. I have the same problem with both Windows XP Home Edition and Windows XP Professional.
Thanks for your assistance.
Ron -
Can't Start Portal After Install
After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the same message.
What password should I use to start the server?I've followed the directions and am experiencing the exact same problem. Brand
new installation of Weblogic server 6.1 SP2 with examples. That install is working.
Then added Portal 4.0 SP1, updated the license file and I have the same issue
with the Illegal access exception resulting in the "Fatal initialization exception"....
Hmm!
[email protected] (Bowrat) wrote:
Below listed are the common errors you run into during installation
process:
- You need to have the correct version numbers of both the weblogic
server and the portal server. For instance the portal server 4.0 (eval
copy) will only run on WebLogic 6.1 SP1. So check the edocs for
supported platforms
- Make sure you have the installed the full version of the weblogic
server (including examples)
- Finally, you need to run the UpdateLicense.cmd file to update the
license.bea under ur Bea Root
Give it a shot after u have checked all of the above three - goodluck
- Bowrat
www.Bowstreet.com
Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
From: Steve Anderson <[email protected]>
Newsgroups: weblogic.support.install
Subject: Can't Start Portal After Install
References:
NNTP-Posting-Host: 209.11.114.150
X-Original-NNTP-Posting-Host: 209.11.114.150
Message-ID: <[email protected]>
Date: 13 Feb 2002 20:25:53 -0800
X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
Organization: BEA SYSTEMS Inc
Lines: 18
XPident: firewall-user
Path: newsgroups.bea.com!209.11.114.150
Xref: newsgroups.bea.com weblogic.support.install:9600
After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the samemessage.
What password should I use to start the server? -
How can I start anew with Photos and clear the (minimal) stuff it has uploaded
I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
more than I have-and of course it got stuck there, like it has for the last week.
I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
<Re-Titled By Host>How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
It is hard to say from your post, why the migration did not succeed in your case.
by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang? Or did already the upgrade to the Photo Library fail?
If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
Can you launch Photos at all? If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary. -
Macbook pro 2006 can only start on safe mode and it has a lot of squares on the screen
My macbook pro 2006 can only start on safe mode and it has a lot of squares on the screen even if I use an external display help? heres a picture http://i61.tinypic.com/vebszt.jpg
Mespinal130,
have you tried running your MacBook Pro’s Apple Hardware Test, to see if it can detect anything amiss? -
We changed PORTAL password by going top sqlplus and OAS. Thinking it will make changes at both places. Now we see that when we start OAS. OC4J_BI_FORM does not start???
I provided an answer in the Portal Security forum:
Can not start OC4J_BI_FORM after PORTAL user password change -
After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
Just bought New battery charged it and the mac finds it but can't start it without charger and when i remove charger in os it dies right away what to do???
Here´s some info:
Macbook Pro 2008 (Early)
Lion
Some INFO from power in about mac
It´s Danish hope you can understand the info
Batterioplysninger:
Modeloplysninger:
Serienummer:
Producent: SMP
Enhedsnavn: ASMB012
Pack Lot Code: a0b0
PCB Lot Code: c0f1
Firmware-version: 8800
Hardwarerevision: 0
Cellerevision: 0
Oplysninger om batterispænding:
Resterende kapacitet (mAh): 5200
Fuldt opladt: Ja
Oplader: Nej
Fuld ladekapacitet (mAh): 5200
Oplysninger om batteritilstand:
Antal cykler: 1
Betingelse: Normal
Batteri installeret: Ja
Strømstyrke (mA): 0
Spænding (mV): 11796
Energiindstillinger til system:
AC-strømforsyning:
Interval for vågeblus for system (minutter): 30
Interval for vågeblus for disk (minutter): 10
Interval for vågeblus for skærm (minutter): 10
Genstart automatisk efter strømafbrydelse: Nej
Afbryd vågeblus ved ændret spændingskilde: Nej
Afbryd vågeblus, når skærmen slås op: Ja
Afbryd vågeblus via LAN: Ja
Aktuel strømkilde: Ja
Vågeblus dæmper lysstyrken: Ja
PrioritizeNetworkReachabilityOverSleep: 0
RestartAfterKernelPanic: 157680000
Batteri:
Interval for vågeblus for system (minutter): 10
Interval for vågeblus for disk (minutter): 10
Interval for vågeblus for skærm (minutter): 2
Afbryd vågeblus ved ændret spændingskilde: Nej
Afbryd vågeblus, når skærmen slås op: Ja
Vågeblus dæmper lysstyrken: Ja
Formindsk lysstyrke: Ja
RestartAfterKernelPanic: 157680000
Hardwarekonfiguration:
UPS installeret: Nej
Oplysninger om oplader:
Tilsluttet: Ja
Id: 0x0100
Watt (W): 85
Revision: 0x0000
Familie: 0x00ba
Serienummer: 0x004fe0c9
Oplader: NejTake it to an Apple Genius Bar to be checked out. It will either be the battery or the Logic board (not sure the charging circuit is a separate part. If it is then it mya be just that part).
If logic board just use it plugged in as for the cost of changing out the logic board you can buy a new system. -
Using Suri asking any localised question in the UK, it responds with 'cannot help' can only use US locations etc. and in US English. Have I missed something or set something up incorrectly? I also thought it would interface with your Facebook but it just comes back with a 'I can't help you with Facebook' message
Yeah, Siri - a headline feature on the iPhone 4s page - is beta at the mo.
But then anyone who's used Macs for a few years will know that most new software is pretty much still in beta when it's released anyway. Only Apple could get away with it and retain customers -
Is there anyway I can find the key after the program has been installed?
Is there anyway I can find the key after the program has been installed?
One the product has been installed you cannot locate the Serial Number on the installed copy. Though we recommend you register your product on Adobe.com, by Going to Help-- Registration.
Thanks! -
After effects and premiere not installing
Hi, I purchased CS 5.5 and when I tried to install on my imac intel core duo OXS 10.6.8 after effects and premiere didnt install. They are not even showing in options in the installer. Everything else is fine except those two. Can i install them on this machine? Thanks
Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM41.0055.B08
SMC Version (system): 1.1f5
Chipset Model: ATY,RadeonX1600As Mylenium says, this is a 32-bit processor.
After Effects CS5 and later is a 64-bit application. Master Collection CS5.5 and Production Premium CS5.5 come with 32-bit After Effects CS4. See this page. -
Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.
Nope. It just opened the installer and stayed in the same loop.
It tells me to choose a startup disk but the only option is the HD which it will not use because it says it cannot gather enough information.
Eveything was working fine until the mountain lion failed install. -
Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.
As a debugging step, try printing to the Adobe PDF printer. If that fails, repeat with print-to-file selected. Assuming the print succeeds, open the file in Distiller to complete the creation of the PDF. If you get the PDF, then check to see if AcroTray is properly working as a background task.
Maybe you are looking for
-
Chart report Condition fields and Data fields
Hi all, i have tried chart report by adding two condion fields and one data field, the report is more meaning full in this scenario. the first condition field is taken as x-axis, the 2nd condition fields is taken as legend. while adding more conditio
-
Mac App Store app does not install. How do I get a refund?
I purchased an app from the Mac App Store (Connect360 - $20). I "installed" the app from the Mac App Store. The app appears on the dock and loads, but when it's done, it disappears from the dock. The app is not located in the Applicaitons menu lik
-
Help with Developer Toolbox...
I am getting the following message when I try to download a file by clicking on the link that was created by the download file server behavior: (ERR_DOWNLOAD_FILE_NO_READ) Can anyone help?
-
Hi, I was looking at a ps1 file someone else wrote. It contains what looks like a custom cmdlet - 'Restart-AXAOS'. This is to restart a microsoft dynamics service. The question is, how is this defined and created in the first place. I cannot find a r
-
Hi, is it possible to assign a priority to an Abap webservice ( comparable to the threading mechanism in java ? ) . thank you, Rolf.