Help! Can't stop the blur, last action, from being applied to new strokes.

I used the blur tool for a line and now every line I make with the brush tool has the same filter applied.
How do I turn it off? TY!

Either:
In Appearance Flyout menu check "New object has basic appearance". This setting will cause all new strokes to revert to default stroke settings.
Or:
Delete the blur from the active stroke and continue drawing. New strokes should not have blur effect.
It is usually helpful for Illustrator to "remember" the appearance of the last stroke, but sometimes that's not what you want.

Similar Messages

HT1541 Can you stop the e-gift card from being purchased

I just bought a $10 dollar e-gift card for myself and sent it to myself. Did not realize how long it can take, and is can just go to the store tomorrow faster than it arriving. Can I stop the purchase or am I stuck?

If this page doesn't help then you will need to try contacting iTunes support (you will need to give them the serial number and activation code from the card) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

How can I stop the Add-on Bar from appearing everytime a new tab or window is opened?

I close it each time, and I have also removed it by unchecking it in the toolbar (or similar) menu. However, it always reappears whenever I open a new tab or re-open Firefox. How can I get rid of it unless I choose for it to become present again?

Right-click the "+" tab and deselect the Add-on Bar entry tick. The Add-on Bar should then disappear for the remainder of the session but will reappear when you restart Firefox. If you want to permanently remove the Add-on Bar then a different approach must be used, using a modified userChrome.css file.

How can I stop the recent and favorites from show on the screen of my i-phone and i-pad, this is a new feature of iso 8

How can I stop the recent and favorites from show on the screen of my i-phone and i-pad, this is a new feature of iso 8

Hi AppleLove78,
I'm sorry to hear you are having issues with your new iPhone 6. If you continue to have audio or call quality issues, you may find the information and troubleshooting steps outlined in the following article helpful:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
Regards,
- Brenden

How can I stop the oracle XSLT processor from inserting extra whitespace in HTML?

How can I stop the oracle XSLT processor from inserting extra whitespace in HTML?

Use <xsl:output mode="html" indent="no"/> as a top-level element child of your <xsl:stylesheet> element.

How can I stop (the annoying) McAffee Antivirus from downloading every time Adobe Flash needs to upate (which lately is every second day)

How can I stop (the annoying) McAffee Antivirus from downloading every time Adobe Flash needs to upate (which lately is every second day)

don't auto update. manually update and untick mcaffee.

How can I stop the iWeb welcome movie from appearing

How can I stop the iWeb welcome movie from appearing every time iWeb starts up?
Oh yes and now that we are talking: when I plug in my ipod, I want iTunes to start, not iPhoto.
Who knows these tricks?

iPhoto seems to be viewing the iPod as a camera. Therefore go to iPhoto's General preference pane and select No application in the Connecting camera opens: menu.
OT

I can't stop the Firefox Start page from opening - in addition to my default page - each time I open Firefox

# Question
I can't stop the Firefox Start page from opening - in addition to my default page - each time I open Firefox

Is this the Firefox branded Google page? If it is, Firefox can store multiple home pages and you may have 2 home pages set. Follow the instructions to set a single home page in this link - https://support.mozilla.com/kb/How+to+set+the+home+page
If it is the Firefox has just updated page that keeps on appearing, there may be a different problem, for details on fixing that see https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox

How do we permanently stop MASS_CRM_* and R3AD_* locks from being applied??

Good afternoon Experts,
How do we permanently stop MASS_CRM_* and R3AD_* locks from being applied in CRM? We have several jobs that run weekly to download information from R/3 to CRM. The information only takes a few minutes to download into CRM, however the blocks are applied during the middle of the night, and cause backups within our system.
Queue name R3AD_SCE also becomes blocked as well during these downloads.
How do we stop these from being applied, without manually having to go into R/3 to remove during the middle of the night?
We currently are on CRM 4.0. The only notes that I found regarding this problem was for 3.0 - 3.5.
Thank you for your help!
Jami
Edited by: Jami Shircel on May 27, 2009 8:00 PM

Thank you very much for your reply.
We are running a job created to download all materials from R/3 into CRM, using SAP program SMOF_DOWNLOAD with variant of material. I believe the locks are coming on as this is a load. However, the job only takes about 15 seconds to run and take the information from R/3. CRM takes longer to process that information. However, the lock does not come off when the job is complete. We have to manually remove the lock the next time someone from the team logs into CRM. This causes problems as nothing from R/3 to CRM is passing through while the locks are on. As soon as the lock is removed, the systems begin communicating again. The job is not impacted as it takes less than 15 seconds to run.
How do we either stop the lock from coming on, or have it automatically come off when the job is complete?
I reviewed the note suggested, but it was for account life cycles. Perhaps the wrong number was written?

Can I control the execution of Action from ICSS / ICWebCleint

We are using ICWebclient and ICSS in our project.
I have an action (to send emails - scheduled automatically) associated to a transaction type and this action fires appropriately when I create the transaction either through ICSS or ICWeb.
Is it possible that I can choose the action NOT to execute if I am creating a transaction from ICSS. In other words to say it should BE executed only from ICWeb.
For example when the user creates a transaction from ICSS I dont want the email to be triggered and if the agent creates the same transaction from ICWebclient, then the email should be triggered.

Hi AltMarianne,
The response of your question is no.
You can't stop or pause teststand execution from Veristand when one of your alarm is triggered.
It will be possible if from Teststand you called Veristand code module and checked the Alarms 's state.
I hope having answer your question.
Regards.
Aurélien Corbin
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Cahiers de vacances de NI
Présentations en ligne : 12 fondamentaux à réviser, du 9 juillet au 29 aoû...

How can I stop the X509Anchors password box from popping up?

I was messing around with some certificates trying to get Office Communicator to work on my Mac here at work.
Ever since then the keychain dialog box continually pops up asking for my X509Anchors password. I know the password, my problem is that this dialog box continually pops up. CalendarAgent is the main app that keeps trying to access it, though others do occasionally as well.
These are the steps I used to access the X509Anchors keychain and change certs:
http://www.aikidokatech.com/?p=42
How can I stop this dialog box from popping up asking for my password every 2 minutes?
I'm currently on OS 10.8.2

That entry in your keychain may be damaged. In the /Applications/Utilities/ folder, launch Keychain Access. At the left, the upper item selected should be login, and the lower on Passwords. At the right, locate (if it's obviously named), the item for X509Anchors and remove it. Close Keychain Access. Then next time you visit the site this is for, it will ask for your login information as if it were your first visit. Enter your info and a new keychain link will be created.

How to stop the std SUS method from being called

Hi
I am working on SRM - EDI integration for NON SUS vendor.I am using a custom mapping and custom method call in this case.i have placed the logic in the std. mapping BADI - BBP_SAPXML1_OUT_BADI.i am triggering my custom method call in this method only.but i am unable to stop the control flow here after as i need not to trigger the Std. process.
Regards,
Durgaprasad Kare.

Hi Durga,
The BADI BBP_SAPXML1_OUT_BADI is meant for mapping purposes in the outbound proxy object and cannot be used to control the message flow.
What I would suggest you to code the custom logic in the BBP_DOC_SAVE_BADI where is you can check the vendor and determine the custom message needs to be trigerred. Besides you have a check at XI level to block those mesages that are not needed.
Regards
Kathirvel

Can I move the time machine drive from being a usb drive

Hello
I am not sure whether this fits best in the time capsule or in the time machine forum. I try here as this a issue thar arises only to time capsule users.
I have a new USB drive that I want to use for time machine backups. Eventually I want it to be attached to the time capsule and make the time machine back up via wifi. However the first backup is 261 Gb and this is too long for the wi-fi. I am doing it right now via the USB and take 12 hours (estimated).
After the USB backup will be finished, can I move the drive to the time capsule and let time machine make the backups via wifi? I mean, is time machine going to find the backup done via USB or once started with USB I am stuck with that?
Thanks for answering and for reading
Roberto
PS
maybe was better on the time machine forum, still don't know.

Backup strategy
Backing up a client computer to Time Capsule hardware with Time Machine software via the network provides ample time for contemplation, and rumination as to why the backup is taking so long. An initial 200Gb backup has an estimated time of "3 days" even on a wired network. Incremental backups following the initial backup are also beset with delays, with various message which can be viewed with the programmer's delight, the "Console" app. Otherwise the System Preference Time Machine interface is mute. The glacial pace of the Time Capsule backup process is exhaustively documented on the internet, but with no solutions - at least that I have found any after too many hours searching.
The System Preferences->Time Machine interface is always used to start a backup, monitor, or stop a backup, whether the backup drive is present on the network via Time Capsule, or if the backup drive is directly connected to the client computer.
On the positive side, Time Machine performs quickly and provides hourly backup to external drives directly attached to the client computer. The delay appears in network backups via Time Capsule.
Another positive is that network backups to Time Capsule are reliable when the client computer is stable, always on, and never detached from the network. In this case, the mute interface offered by system preferences->Time Machine is welcome. For example, my Apple Mac Mini web server (always on) is reliably backed up to a Time Capsule.
The negative experience is encountered when backing up a laptop when, as laptops do, the laptop wanders from the network. As stopping a backup can take 15 minutes, backups are necessarily interrupted when dashing off to work with your laptop. In the network where I have experience, there are 5 laptops and 1 stationary (Mac Mini) clients living on an all-Apple network. Failing to complete a backup via network for days on end gives no feeling of security.
Reading from Podini's excellent website
http://pondini.org/TM/Works.html
and extracting a summary, files copied from a client computer using Time Machine are stored on the backup drive in one of two formats: sparse bundle (special file type) when backing up to Time Capsule (or to a drive attached to a Time Capsule), or a folder with the client computer name when the backup drive is Firewire attached to the client. A closer examination of the sparse bundle file on the network with the Finder shows that the same folder appears with the computer name.
So, Time Machine backups always go to a folder with the client computer name, and this folder is either inside a sparse bundle or not depending upon if the backup drive is mounted on the network via TC or directly attached to the client.
An external drive mounted on the network via Time Capsule will create a sparse bundle file for the client or add to it if it already exists. Even if backups are present of the same machine, but not in a sparse bundle, Time Capsule will create a sparse bundle if it does not exist for the current backup client computer, and start a new backup.
An external drive directly connected to the client has a different experience. No Time Capsule is involved. Upon turning on backups via Time Machine, the backups will go to a sparse bundle file with the client computer name, if it exists. If the sparse bundle file does not exist, a folder is created with the computer name.
A strategy of backing up to an external drive moved between various computers and the Time Capsule might resolve some of the many delays. The strategy is simple, if delays are encountered, directly attach the backup drive to the client computer. If a backup is to be manually deleted in order to begin anew, directly attach the backup drive to the client computer before deleting the sparse bundle file.
To begin a new backup with this strategy of "drive+TC", initiate (via TM) the backup on the network (via TC), then stop after 10 minutes (with TM), noting that a sparse bundle of zero size is created. Continue the first backup by directly connecting the external backup drive to the client then pointing Time Machine to the newly connected drive. The backups by way of direct connect will go to the existing sparse bundle. Wait three hours rather than three days for a 200Gb backup to complete. Subsequent backups will go to the sparse bundle file on the backup drive, whether the backup drive is on the network (via TC) or directly connected.
But what of the internal drive on the TC? In this strategy, it is not used for backups unless the client computer is always attached to the network.
With so little documentation from Apple, we are left to speculate as to the cause of TC largo. Normally, slight documentation means little to know for the user, and the user is spared the complex machinations under the hood, but when the operation is flawed the user is left without resources.
A secure backup strategy stores a backup offsite, just in case the house burns down, or buglers make a clean sweep of computers and backup drives. Unfortunately, this means doubling the equipment, including two Time Capsules and two external drives attached to the TCs. The offsite copy is rarely mentioned in the same paragraph as the Time Capsule, likely because of the cost. It's an uncomfortable fact that a sole TC is vulnerable to local hazards, along with the local client computers.
This is the strategy I'm testing now. I'll send an update in a few days.

How can i get the music ive copied from cd onto my new computer

how can i get the music that i have copied from cd's on to my new computer.(the computer my phone was sync to blew up) if i sync to the newit i will all the music thats on my phone,

Restore from the backup of your old computer. Copy it from the CDs.
Look for a 3rd party app that can do what you want. Senuti has been
mentioned in the past - I do not use it so cannot comment on how
well it works. I would assume there are others as well.
iOS does not natively support syncing music back from the iPhone
to a computer.

How can I stop the Thinkpad Yoga 14 from disabling the touchpad and keyboard?

My dad got a Thinkpad Yoga 14 about a month ago and he usually uses his laptop at a 90 degree angle in bed. So when he is on his side, the laptop is on it's side as well. When he does that with the Thinkpad Yoga, the touchpad and the keyboard are disabled and he cannot use the laptop like he wants to. I think because it's a setting to not accidentally touch the keyboard or mouse when using it in tablet mode.
I cannot find any setting on how to stop Windows from disabling the touchpad and keyboard on rotate. I've turned off auto-rotate but can't see anything else. Any help would be greatly appreciated! Thank you!

iPhoto seems to be viewing the iPod as a camera. Therefore go to iPhoto's General preference pane and select No application in the Connecting camera opens: menu.
OT

Help! Can't stop the blur, last action, from being applied to new strokes.

Similar Messages

Maybe you are looking for