Help.. cannot add user on restored image to xserve

Hello;
After a hardware failure of a 10.5.8 ical server I restored the ccc image to a brand new xserve (purchased early 2009).
All looks good until I log into wgm... authenticate to ldap... and see that the new user button is greyed out, all editing capabilities are gone...
I am panicked and don't know what I did wrong?
Thanks.

Wow, that was obscure, thanks for posting an update with the solution. Maybe you save someone from the same issue or answer the question for someone in future and save them the trouble you went through.
=Tod

Similar Messages

Cannot Add user to CMC Group when they are a member of LDAP group

On PreProduction Server CMC
Softerra LDAP browser used to verify user is a member of LDAP group
User does not show as a member of that group in the CMC
Cannot add user to LDAP group showing in CMC, the same group shows the member in LDAP browser
On Production Server CMC
For kicks I logged into the CMC on Production and I found the user is correctly showing as a member of the Group
Why doesn't the groups in CMC show what is actually showing in the LDAP browser?

Hi,
Check if you have also mapped in both servers the same groups. It might be that there are some groups missing in the Pre-prod.
Also, try restarting the CMS. I have seen similar issues that are solved after forcing the recreation of the graph.
If after the restart you still can't see the groups, check the mapping on the LDAP server. It might be that both servers do not use the same attribute mappings.
Regards,
Julian

Cannot add users to a mapped third party group

Hi Experts,
When i try to add my sap groups(SB1~100@xxxx) to my ad users iam getting error as "cannot add users to a mapped thirdparty group.Pls advice how can i add these groups

You cannot add a user to a SAP group, create an enterprise user group and add both SAP group and AD user to that.

Cannot add users to mapped third party group

when i try to add a user to a group i get the following message
"cannot add users to mapped third party group"

If a group was mapped in via AD/LDAP/SAP then the users must be added in the 3rd party (AD/LDAP/SAP) you cannot create members inthe CMC. This is by product design. If you want to add members to groups in the CMC they must be enterprise groups only (groups created in the CMC not mapped in from 3rd parties).
Regards,
Tim

Cannot add user to group eventhough i have full access

i cannot add users to groups in subsite even i am in the owners group of the subsite

Check the settings of the group itself. By default the only person who can add users to a group is the person who created the group. I normally change the group settings so the group is owned by the Site collection root site owners group. That
way any of those users can modify the membership of the group.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Cannot add users to Calendar Server

Cannot add users to Calendar Server

You may get the following error when you try to add users to a new
installation of Calendar Server 3.0:

Could not bind as [nsCalXItemId=10000:00001, o=Ace Industry,c=US]. 
Create ObjectClass for user [cn=John Doe, o=Ace Industry, c=US]... failed.

This is an inconsistent problem that we are trying to duplicate on a
regular basis. There are a few solutions:

1) Create another node. This seems to work every time. 
2) Deinstall the Calendar Server completely and reinstall. Be VERY
careful of the Directory Server URL definition.

What printer model is it? I ask, because often manufacturers provide USB-only drivers for USB-only printers - for Macs, that is. In other words, if you know about CUPS from using Macs and linux, the manufacturers actually provide drivers with the comm protocol built-in, rather than make use of the USB "backend" available from CUPS. These are called "monolithic" drivers - they don't follow the unix/linux/CUPS concept of making use of already-provided modules.

Error: "LDAP Synch status is enabled. Cannot add users through BAT."

In 10.x it looks like Cisco has disallowed user imports (via BAT) into LDAP-integrated systems. Has anyone else run into this? Below is the error I'm receiving in the Job Status log file. The error implies that "it's a feature, not a bug". How are large companies supposed to import new phones/users when they open new branches or do a phone refresh? Breaking LDAP to do the import isn't a option because you have to blow away your LDAP directory config to do so - not to mention people wouldn't be able to log into Jabber or their user pages while it was broken. I'm hoping someone has a workaround or has already spoken with TAC about this.
Failure Details :
Device Name/User ID Error Code Error Description
LDAP Synch status is enabled. Cannot add users through BAT.
Result Summary :
INSERT for 0 PHONES passed.
INSERT for 5 PHONES failed.
INSERT for 0 USERS passed.
INSERT for 5 USERS failed.

So if a company has a large CUCM deployment and adds another branch (let's say 100 phones/users), I would have to go user by user and do the phone associations, profile associations, primary extensions, etc 100 times?
Is there a better way that I'm missing? That just doesn't seem logical. In previous versions (I'm not sure about 6.x in the link. I started with 7.x) I could have sworn that I could import from BAT even if LDAP was integrated. I would get an error and only the non-LDAP fields would get changed, but the changes, associations, etc. would still go through.

Cannot add user to workspace

Dear,
I cannot add the below user
Email First Name Last Name uid Status
[email protected] Devanath Desikan ddesikan Verified
to the workspace: https://beehiveonline.oracle.com/teamcollab/overview/PMI_Benelux_Day_Workspace
The above user is the only one who's UID is not equal to the email address.
Your help will be appreciated.
Kind regards
Francis

Phil,
thanks for this, but the user was not able to log on.
Created a new user ID using another email from him.
this time it worked.
It seems that modifying the login_id to his email address does not work. I had similar problems with my private logon id in the past. I also had to create a new Oracle ID using another email address.
But this can be closed since we used a workaround.
Kind regards
Francis

Cannot add user

Just upgraded from Snow Leopard Server to Mountain Lion Server. Running into a few issues that I can't resolve.
1. Updated wiped out my Users. Cannot add a User becuase the "+" is grayed out, same for groups. All I see are my local users which I can edit.
2. Cannot connect remotely to the server using the Server.app, seems to be rejecting the password even though the same credentials gets me logged in to the Server.app running on the server.

Please restart first and afterwards tell me about your setup.

Cannot add user throws a error in apex 4.2 of sample demo application admin

In sample demo of apex 4 which is migrated to apex 4.2 in sample application module in admin section..
If i add a user
And at default i dont give a password it throws a error ..
First go to following link
[http://apex.oracle.com/pls/apex/f?p=18534:LOGIN:25053108911952]
and enter user name as admin and pasword as test
Once when you login click on Tab manage admin user which is on right hand side..
Now to add a user click on add user button.. add the record and click save..
It throws a error saying
1 Error has occured column must have a value..
How can i remove this error message ? .. Can some one help..
select
"USER_ID",
"USER_NAME",
"CREATED_ON",
decode(password, null, 'Set Password', 'Reset Password') rp,
expires_on,
admin_user,
utype
from "#OWNER#"."DEMO_USERS"
where user_name != 'ADMIN'
The above query is used.. and inside it i RP column is culprit since the user has no password..
Since user has no password it doont save the record.. I checked the table and this column has no not null constraint..
http://apex.oracle.com/pls/apex/f?p=18534:LOGIN:25053108911952
Edited by: pauljohny on Nov 27, 2012 12:22 AM
Edited by: pauljohny on Nov 27, 2012 12:24 AM

closing the thread its seems working now..Removed some validation issue
Thanks

Cannot add Users to Groups

Hi there,
I cannot add any users to any groups in the last week. This occurs only with the Server app. In Workgroup Manager I can, but the group membership do not appear when I open the Server app. I have tried to do this through the individual user page or through the group page. Each time I get the following message "Operation is not supported by the directory node."
Suggestions?
Thanks
Mitch

Small correction. Also cannot add group in Workgroup Manager. The error is "This action failed because an Open Directory plugin has not implemented that functionality yet."
Mitch

Cannot add users to the Calendar Node error 0x13209

I cannot add new users to the Calendar node. I am receiving error 0x13209. Any advice??

You cannot add a user to a SAP group, create an enterprise user group and add both SAP group and AD user to that.

Cannot add users to roles

I have configured OpenLDAP data store with Access Manager. I can see the users added in LDAP in the Subjects tab of Access Manager, but when I create a role ad try to add users in the role I get the exception
Plug-in com.sun.identity.idm.plugins.files.FilesRepo: Unable to find entry: C:\Documents and Settings\161101\amserver\idRepo\user\frank
Can anybody suggest what is problem

Hi there,
The reason why you have file repo is because you installed the AM using file repo instead of LDAP.
Deleting the File Repo configuration for that realm will not affect the configuration part of the AM ( I would still do a backup ... just in case) because the datastore configuration has nothing to do with that. The configuration part of the AM is at the platform level and you have that configured on the configurations tab of the platform. What I'm sugesting is on that specific Realm ( I usually use a different Realm other than the Root realm ... this way I'm sure not to mess it up ) go to the datastores (which is the place where user data is stored and not the configurations (though they might be the same) ) and delete the file datastore configuration (or point it to a different location ... but do not delete the files on the filesystem, because they are still in use by other Realms and the configuration ) .
Configuration data and User repositories can be configured in different places .... which is what you are now trying to do .... have the conf on the file system and have the users on an LDAP.
Defenetly do a backup of your stuff ... and if at all possible use a different realm other than the root realm.
Hope this helps .... and makes any sense !
Rp

Cannot add users to new domains anymore

I got messaging server and delegated admin to work just fine recently until I tried getting LDAP authentication to work so LDAP users could log into Sunrays.
I used idsconfig and saw that it added a bunch of stuff to the directory so I deleted that stuff after I realized I couldn't add users to a new domain anymore. It just says "cannot create user - unknown error". I can still add users to old domains just fine.
And I tried both DA and commadmin, neither work. Heres my Messaging server and DA version:
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)
SunOS testy.i-n-control.com 5.10 Generic_118822-25 sun4u sparc SUNW,Sun-Fire-V440
Delegated Administrator 6.3-0.09
I turned on debugging for DA and heres the output:
TRACE [Wed Aug 02 10:10:47 MDT 2006] Default people container = ou=People,o=domain,dc=mail,dc=example,dc=com
TRACE [Wed Aug 02 10:10:47 MDT 2006] ServerPushThread: setting stop flag
TRACE [Wed Aug 02 10:10:47 MDT 2006] commTaskManager: progress thread stopped
TRACE [Wed Aug 02 10:10:47 MDT 2006] com.iplanet.am.sdk.AMException: Unable to create entry.
     at com.iplanet.am.sdk.ldap.DirectoryManager.processInternalException(DirectoryManager.java:433)
     at com.iplanet.am.sdk.ldap.DirectoryManager.createUser(DirectoryManager.java:1046)
     at com.iplanet.am.sdk.ldap.DirectoryManager.createEntry(DirectoryManager.java:1525)
     at com.iplanet.am.sdk.AMDirectoryManager.createEntry(AMDirectoryManager.java:651)
     at com.iplanet.am.sdk.AMCacheManager.createEntry(AMCacheManager.java:337)
     at com.iplanet.am.sdk.AMObjectImpl.create(AMObjectImpl.java:1009)
     at com.iplanet.am.sdk.AMPeopleContainerImpl.createUser(AMPeopleContainerImpl.java:285)
     at sun.comm.cli.server.servlet.CreateUser.create(CreateUser.java:677)
     at sun.comm.cli.server.servlet.CreateUser.doTask(CreateUser.java:91)
     at sun.comm.cli.server.servlet.commTaskManager.execute(commTaskManager.java:196)
     at sun.comm.cli.server.servlet.commServlet.doPost(commServlet.java:90)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:807)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
TRACE [Wed Aug 02 10:10:47 MDT 2006] After AM Exception , msg being sent is Unable to create entry.^324^NONE
TRACE [Wed Aug 02 10:10:47 MDT 2006] in CLIPageData constructor:status = 1
TRACE [Wed Aug 02 10:10:47 MDT 2006] commTaskManager - execute => generateOutput
TRACE [Wed Aug 02 10:10:47 MDT 2006] In CLIPageGenerator ....
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput : cliData.status = 1
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput : CLIPageData.OK = 0
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput : CLIPageData.FAIL = 1
TRACE [Wed Aug 02 10:10:47 MDT 2006] Failed: Unable to create entry.^324^NONE
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput - Printing successfull results
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput - status => FAIL
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput - message => Unable to create entry.^324^NONE
TRACE [Wed Aug 02 10:10:48 MDT 2006] ServerPushThread: done
TRACE [Wed Aug 02 10:10:48 MDT 2006] ServerPushThread: done
TRACE [Wed Aug 02 10:10:49 MDT 2006] ServerPushThread: done
TRACE [Wed Aug 02 10:10:58 MDT 2006] sun.comm.cli.server.servlet.commLDAPAuth: shutting down. Total access count = 1
Message was edited by:
nate.wheeler

Frankly, I'm new to LDAP so I don't know really what
changed.No time like the present to start learning.
Its weird, I can do some things, but not
others. Like I can assign service packages, but not
change the login id or password of a user. So it
doesn't look like amadmin can't change things.LDAP provides "ACI", or Access Control settings that can be changed, and create exactly the kinds of things you're looking at.
The Directory Console can view ACI
>
The password encryption seemed to have changed from
{SSHA} to {CRYPT}. Although I have no idea how to
switch it back or where to look to see if it did.Unlikely to have made any difference. That should be transparent to the application using DS.
Most of our applications don't compare the password entry, but attempt a BIND for that very reason.
Again, I'd be looking at your LDAP access logs for a clue to what's happening.
>
Message was edited by:
nate.wheeler

Cannot add user to ticket

I have a few users added to my team. However, on the kanban board, i cannot assign a ticket to anyone but myself.
What do I need to do to allow this?

Hi Dugong,
Thanks for your post.
What’s the version of your TFS?
Do you mean that when you opened Task work item from Kanban board, you cannot assign it to your other team members? If yes, please open the ticket from VS and check if you can assign it to other team members. If still cannot assign it to other members in
VS, please check if you customized the Assigned To field rule in your ticket work item type.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help.. cannot add user on restored image to xserve

Similar Messages

Maybe you are looking for