HELP - Cannot print to local printer from iPhoto '11 v9.2.1 (628)

How can I print?  This problem just seemed to pop up out of nowhere?!?  When I try to print a picture from any folder, by highlighting picture, pressing File and Print, I get following error window: "No Available Themes - There were no themes located. Until at least one theme has been installed, this feature will be unavailable."  I can not get to a printer dialogue window?!?

Check out OT's post in this thread:
http://discussions.apple.com/thread.jspa?messageID=6394288&#6394288
Also, note his comments here:
http://discussions.apple.com/thread.jspa?messageID=6998840&#6998840
> Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
Regards
TD

Similar Messages

  • For some unknown reason, the print themes have disappeared from iphoto 11 so cannot print. How can I fix this?

    I cannot undderstand why the print themes have disappeared from iphoto 11 so I can no longer print photos from my imac. Can anyone advise me please?

    When the device is set to Automatic for time, it is pulling the time from the cell towers.  Contact the carrier to ensure they are not experiencing issues.
    Also, check the time on your computer that the device syncs with, make sure that the time (and time zone) on the computer are accurate.

  • Windows cannot connect to the printer the local print spooler service is not running please restart the spooler or restart the m

    We have 7 computers on a local network 3 of them have local printers 2 and are brand new Vista equiped. we shared the local printers on the vista machines but they are unaccessable from one vista to the other... it works from an XP to a Vista, but not from a Vista to a Vista.... go figure.... When we try to add the printers, the error message that we get is: "windows cannot connect to the printer. the local print spooler service is not running. please restart the spooler or restart the machine."
    I would appreciate any help...
    Thank you

    This worked for me.  GP
    Problem : error 1075 and Local print spooler service is not running.
    problem description : I have a Lexmark x4270 all in one. I installed the driver for it in my new laptop running Vista. Turns out the driver is not for Vista but XP. I uninstalled the XP driver and downloaded a Vista driver from Lexmark. When I try to run the printer software I get a message "Local print spooler service is not running. Please restart the spooler or restart the machine." I tried all of that. I have looked this problem up on the web and it is quite common with Vista. Many of the "solutions" say it is a problem with an incomplete removal of the incorrect printer driver and they show how to correct in the registry. I am not comfortable tinkering with the registry and thought I'd consult with you first.
    I tried "everything" I could to fix the problem of getting "error 1075" fixed in my HP laptop running Vista.  HP came up with simple solution below.  The regedit part is what fixed mine.  I did not need the safe mode part.  I think Lexmark should add the solution to your knowledge base.
    ==============================
    From HP:  Please perform the below given steps in safe mode to resolve the issue.
    Reboot your notebook and press F8. The system will show some booting options select safe mode.
    Note: Starting computer in safe mode may take some time.
    Uninstall the printer using Programs and Features from the control panel of your notebook.
    Uninstalling any software from Control Panel :
    1. Click on Vista (start) button
    2. Click on control panel
    3. Double click on Programs and Features
    4. Click on YOUR Lexmark Printer  and click on remove.
    Download and reinstall the printer software using the below given link :
    http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:438:0:0&searchLang=en&os_group=Windows%20Vista&target=
         NOTE:  Clicking the link may give an error indicating it is invalid.
                Copy and paste the entire link in a new browser window.
    After the installation of drivers, restart the notebook into normal mode. Now plese check with printing any document. If the still persists then perform the below given steps :
    Click on Vista (Start) button, and type Regedit.exe in search bar
    Navigate to the following branch
    HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Spooler
    In the right-pane, double-click the DependOnService value
    Delete the existing data, and then type RPCSS
    Close Regedit.exe
    Restart the computer.
    This should resolve the issue.
    For information on keeping your HP and Compaq products up and running, please visit our Web site at:
    http://www.hp.com/go/totalcare

  • Exporting iphoto books for printing at local printing services

    Does anybody know how to export an iphoto book for printing at local printing services, other than Apple printing services?
    I tried to export, but the only option available was to "export to iDVD", which is not very helpful (does not generate a printable file).
    I'd appreciate any hints...

    Yanomami:
    Welcome to the Apple Discussions. What you want to
    do is do a print to pdf. Then take the pdf file to
    the printing service to be printed.
    Thank you for the tip. One follow up question: does PDF file have the right photo quality/definition to print a book, or would it be better to export to a TIFF file or some other type? If so, how to export to TIFF then?
    Thanks again for any help you can offer.

  • Cannot print on LOCAL printer, but only from one application server

    Hello guys,
    we have a  case of user being unable to print directly on their own LOCAL printer from a certain application server. The status of their spool requests is stuck on "Waiting"/"Waiting for output formatter."
    If the print request is started either from the central instance or another application server, then everything works fine and a special window where you can choose your real local printer appears at the end and the request is printed. In the case of that "strange" application server this window doesn't appear at all. It seems that the printer daemon (SAPLPD) won't even execute in the background.
    The question is what can disturb SAPLPD of being properly triggered when the user fires a print out.. May be a certain port is blocked on our linux machine, where this application server (dialog instance) is running?
    Any other ideas?
    Many thanks,
    Polina

    hello Polina
       As you said its LOC print ,you need to install SAPSprint service on printer host ,this will try establish communication wit
    app server .
    Regards
    Arun.H

  • Printing 4x6 photo's from Iphoto

    for some reason i cannot get my parents g5 imac to print from iphoto to a 4x6 picture paper in their HP photosmart 7550 printer. I have all the drivers installed. but i can seem to get it to print out correctly. it just prints the image really small on the photo paper. but on the "preview" before i print it looks how it is spposed to.
    any help?
    thanks!
    -James

    nevermind. i figured it out. as always it was something that was overlooked
    -James

  • How to print a local file from jsp

    Hi,
    I want to print a local file(eg. .doc,.pdf) from a jsp.
    Please help me with any answer or any example code
    Thanks in advance
    Regards,
    Sanjeev

    Try this:
    index1.jsp:
    <%@page contentType="text/html" pageEncoding="UTF-8"%>
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
    <Link rel='alternate' media='print' href=null>
    <script Language=JavaScript>
    function setPrintPage(prnThis){
    prnDoc = document.getElementsByTagName('Link');
    prnDoc[0].setAttribute('href', prnThis);
    window.print();
    </script>
    </head>
    <body >
    <a href="#" onclick="setPrintPage('index.jsp');"> Click to Print </a>
    </html>This will print index.jsp without opening it in browser. Hope this helps!

  • Printing to local print device from WEBGUI

    Hi SAP expert
    Got a question regarding WEBGUI priniting.
    In SAPGUI when you select print to LOCL, it print to the PC default print device, but if we print via a WEBGUI screen, the printing output to a PDF file first, we can then print from the PDF file.
    Is it possible to print from the WEBGUI without going through a PDF generation? or make WEBGUI understand the local print device?
    Any help or suggestion will be most appreciated.
    Edited by: Jim Boyden on Sep 4, 2008 7:49 AM

    As far as i remember is not possible to print to LOCL from a webgui session (i can't remember exactly why)..
    Try configuring your default printer as a network printer in SAP with method F or U and you'll be fine.
    Regards
    Juan

  • Difficulty printing what I want from iphoto 08

    Another feature I have found annoying in 08 is that I do not seem to be able to dictate what size the image I am printing is printed at (ie: wallet, 3x5, 5x7, 8x10) - I have only been able to find the basic one size fits all.
    Along the same lines, when printing a contact sheet you use to be able to print a full page contact of the same image and now I am at a loss and have only had it show 1 image with the remainder of the page blank.
    Any help is greatly appreciated!

    I ran into the same problem with the contact sheet printing too. iPhoto 06 was so much easier and straightforward with that type of printing, it's a shame it's become convoluted in iPhoto 08. That said, I figured out a way to do it:
    Step 1: Figure out how many photos, at the size you want, will fit on 1 page. For these steps, I'm going to print 3x5 photos and know that 4 3x5 photos will fit on 1 page.
    Step 2: Select 4 photos making sure 1 is the photo you want to print and click Print.
    Step 3: Keep the layout set to Standard (not Contact Sheet) and change the Print Size to 3x5.
    Step 4: Click the Customize button.
    Step 5: Switch the view at the top to show all the photos. You should then see 4 photos with checkmarks in the bottom right of the photos.
    Step 6: Select from the top the 1 photo you want to print and then drag it onto each of the 4 photos below. Your photo will then appear as all 4 photos and will be the only one with a checkmark at the top.
    Step 7: Print away.

  • Printer - Different print from local print and local print - Why ?

    Hello,
    I print a document developed by smartforms.
    In this document there's a window with a gray color in background.
    If I choose local_default_printer this color is showed.
    If I print directly, choosing printer LP16 and not local_default_printer the whole windows is black !!
    Why this error, this difference ? some parameters to set up on the spad ? what else ?
    thank you.

    Hi,
    Generally all output devices have same divice type and  have the same kind of  behaviorwhich means that the the printers which have  different device type can give you different output.
    So if you want the output for the same behaviour  printers it might happens with different kind of printers.
    So it's better to test with different kind of printers (output device) which have been used previously with clear view.
    Thnaks,
    Abhijit

  • Unable to print to local Printer over RDP - Windows Server 2008

    Hi,
    Windows 2008 Foundation R2.
    Started to have issues with printing to a Local printer over RDP.
    The problems started on Friday 11th April. The only possible issue I can identify is that around that time LogMeIn was updated on the server, including the LMIPrinter DLL's.  I have contacted Logmein for instructions on how to uninstall LMI completely
    and followed these but am still experiencing the problem.
    When attempting a Test Page print the confirmation that the Test Print has been sent to is displayed and the print appears then disappears in the Print queue but nothing appears on the Local PC print queue or event logs.
    On the server the Event Log shows the following error;
    The document Test Page, owned by admin, failed to print on printer Canon MG7100 series Printer (redirected 2/copy 1). Try to print the document again, or restart the print spooler.
    Data type: RAW. Size of the spool file in bytes: 142691. Number of bytes printed: 0. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \\ONESTAGE-TS01. Win32 error code returned by the print processor: 2147500037. Unspecified
    error
    I have searched for possible solutions to RDP printing problems and where relevant implemented them but no change.
    I have access to a second customer who uses RDP and am able to log onto that and print to my local printer so am pretty sure there is nothing wrong with the local printer or settings.  On the Server with the problem the problem affects all RDP users
    and all printers (including Adobe PDF printer and MS XPS printer).  All printers are defaulting to the EasyPrint Drivers.
    Grasping at straws I think the LMI update has banjaxed something with the RDP remote printing and an LMI uninstall hasn't fixed it.  Is there a way to reinstall the RDP Printing?  Would uninstalling & reinstalling .NET have that effect?

    Hi,
    Thank you for posting in Windows Server Forum.
    What’s your client OS and RDP version in your environment?
    First of all suggest you to run “sfc /scanow” with this link to check whether which file causing the issue. Check the RDP version on the RDP client computer as well as the .NET framework version with respect to the operating system used (as explained above).
    Also verify that the RD Session Host / Terminal Server role is installed if the host computer is running Windows Server 2008 R2 or Windows Server 2008.
    The setting “Use Remote Desktop Easy Print printer driver first” must be set to “Enabled” for Easy Print redirection, and it has to be “Disabled” for Legacy Print. For “Not configured”, Easy Print is chosen by default.
    Check The Remote Desktop Configuration Tool (tsconfig.msc) settings to ensure that the “Windows Printer” option is not disabled (it is not disabled by default). 
    Make sure that the “Printers” check box in the client (mstsc.exe) window on the “Local Resources” tab is checked. The corresponding setting in the associated RDP file is “redirectprinters:i:1”.
    More information:
    Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
    http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx?Redirected=true
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • PrintToPrinter()  - Unable to Print to Local Printer on WebServer

    Dear All,
    I am using Vs2010 Pro bundled with Crystal Reports 13.
    When I deploy my Web application, and try to print to a Print installed locally on the Server through the report.PrintToPrinter() function, the Print Job appears on the pool and then it to hangs and timeout. When the print is done through a ReportViewer it works perfectly.
    The print job appears on the printer's pool owned by ASPNET user. I believe I am facing some kind of authorization issue.
    I've tried several Approaches, such as reinstallation of the CR Runtimes, and even authorization for the local asp.net account, but nothing seems to work.
    Source Code:
    'Load Report
                strPathAux = HttpContext.Current.Server.MapPath("Report.rpt")
                report.Load(strPathAux)
                report.PrintOptions.PrinterName = "Name of Printer"
                report.PrintToPrinter(1, False, 0, 0)
    Thank you all in advance.
    Kind Regards,
    Licínio Sousa

    See if SP 1 helps:
    SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
    MSM     
    http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_mergemodules_13_0_1.zip
    MSI 32 bit     
    http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0_1.zip
    MSI 64 bit     
    http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_64bit_13_0_1.zip
    [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] may help to determine if this is a permissions issue.
    - Ludek

  • Not able to print to local printer on someone else's machine

    I have a user in our office who hooks up to the internet, but now has a new machine and did not hook up to our domain.  She uses Windows 8.1 and has a local printer for her advisors to use.  She used to be a part of the domain, and people(who are the domain) could print to her local printer.   Now that she is no longer part of the domain no can print to her and when you try to add her printer, it says access denied.   What's going on?
    This topic first appeared in the Spiceworks Community

    I have a user in our office who hooks up to the internet, but now has a new machine and did not hook up to our domain.  She uses Windows 8.1 and has a local printer for her advisors to use.  She used to be a part of the domain, and people(who are the domain) could print to her local printer.   Now that she is no longer part of the domain no can print to her and when you try to add her printer, it says access denied.   What's going on?
    This topic first appeared in the Spiceworks Community

  • Print Logo Local Printing vs SWIN (Network Printing)

    Hi experts,
    Hoping someone has experienced on this issue.
    I've tried to add new printer LJ2105 PCL 6, with 2 approaches, shared printing & local printing.
    For shared printing (PC share the installed printer)
    Devive type: SWIN
    Access method: S
    For local printing
    Device type: HPLJ4
    Access method: L
    The shared printing results a good logo printout, but the local printing has blur logo printed. Please advice if you have some kind of experiences like this...
    Thanks!

    Hi Juan,
    The shared printing method that I used is basically the same with printer server, I attach the printer to a PC, installed with the printer driver, and use SWIN as device type. It works fine.
    The only problem (logo printed with dots background) is when I attached/install printer at OS level (local printing) and using some device types mentioned above....
    Thanks...

  • Network printer or local printer with terminal server

    Hello
    We have a technical issue I believe on invoices we want Business One to automatically generate a printout document but nothing happens although settings are correct
    The only thing I do not handle very well is we have busines one running on terminal server ad the printers are local
    Can someone advise if automatic printout on local printers is possible with a terminal server ?
    thank you in advance

    Sap Business One uses the windows printing architecture to print, so.. as long as you can print via windows on the terminal server, SB1 should be able to print it.
    One thing to remember is, if you are using RDP, make sure you are using the latest RDP Client, I believe it's version 6.5 at the moment, but a check on windows update should confirm that.
    If you want to print locally, you'll need the following to be true:
    1. Printer redirection box in the RDP Settings is ticked.
    2. The Policy on the terminal server, or terminal server gateway allows you to connect printers via RDP
    3. The drivers for your particular printer must be installed on the terminal server (One for your IT Dept).
    If all those are met, you should then see, when you go to print, something like <Printer> on <workstaiton>, where printer is the name of your local printer, and the workstation is your local workstation ID.
    With a bit of luck, you can then print.
    T.

  • Need help : cannot anymore select local info in site definition only remote

    Hi
    I made the mistake choosing in site deffintion for remote info and not local info
    Now it seems impossible to reverse it cannot anymore select local info in site definition only remote
    So now I can not make the site normally.
    I've closed dreamweaver a couple times and tried it again and even my pc but it seems to be something irreparable?
    Does anyone know a better idea than reinstall?
    thank you
    Paul

    You are on the Basic Tab of the Site definition dialog in DW CS3.  Unfortunately, that's also the more confusing way to define a site.  Nevertheless, you'll note that there are 3 selections across the top of the dialog:
    1.  Editing Files
    2.  Testing Files
    3.  Sharing Files
    Have you already filled out the first two?
    A site definition in DW *could* only have the first of those three filled out - you really only need the local site defined until you are ready to upload your files (assuming you are only creating static pages - that is, pages without server scripting).
    To define most remote sites, all you need to do is to select that you connect to your remote server using FTP, and then to state the folder within which your website files are stored on the remote server (often this is a folder called 'www' or 'wwwroot' or 'public_html').
    In my mind, the better way to define a site is to go right to the Advanced tab - it's less confusing because you just fill in all of the fields without going through this 'wizard-type' interface....
    So - does that help at all?

Maybe you are looking for