Help - Canon Mark IV CR2's won't open in ACR from Bridge CS3

Hello, I have CS3 - Bridge version 2.1.1.9 and I've uploaded 200 RAW images that show up blank.  The files show 21 mb and as a .CR2, show up in the camera, however, no previews in Bridge.
Do I need a newer version of Bridge and ACR?
Thanks,
Captain

Noel Carboni wrote:
I did see, as I was researching my response, that there's only one model that has reached Mark IV stage so far, so my question wasn't completely necessary.  I have been anticipating a 5D Mark IV at some point to counter Nikon's latest offerings.
-Noel
You may need to wait a while since the 5D Mk III is baely out of the starting gate.
The reviews seem to all say that the 5D Mk III is blowing the competition out of the water.  I an't verify that since I use a 7D.
BTW, I would recommend upgrading to CS6 as opposed to using DNG converter.  The new features such as the automatic CA correction, lens corrections, and better noise reduction make it worth upgrading.
Paula

Similar Messages

  • Some recently scanned files (TIFFs) won't open in ACR from Bridge, while most will. Why or how to correct?

    All my TIFFs will open from CS6. In Bridge, when I select some TIFFs, the “File > Open in Camera Raw…” is greyed out.  For other TIFFs it is not.  Similarly for right clicking on an thumbnail in bridge. I’ve noted that preferences refers to “supported TIFFs” but can't find information on when a TIFF is not supported. Is there a size limit, the problem scans are larger than my normal ones at over 800MB!.   I’m on a MAC, OS X 10.9.5, PS CS6 13.0.6 and ACR 8.7.1.311.  My current work-around is to open these from PS.  Also note that the Bridge thumb nail do not have the symbol showing it's been changed in the upper right corner on the TIFFs I can't open, yet when I open as a RAW image from PS the changes are reflected in ACR.

    Some additional information: When I open the image as a raw image from CS6 my previously made raw changes are intact.  But, when I open it in CS6 but not as raw (e.g. open recent images), none of my raw adjustments are there.

  • ACR 7.3 suddenly won't open multiple NEFs from bridge

    Suddenly today, when I select multiple NEF files from the bridge (updated pc, cs6) .. the ACR opens ONE file at a time.  The bar to the left isn't there showing me all of them.  When I close ACR another window pops up with the next image I had selected.  What setting is messed up or what can I do?!?  I have rebooted.

    I swear I looked really hard for that handle, am aware of it and thought myself it had to just be hidden but if that was the case, clicking to say I was "done" would NOT have opened up more individual ACR windows, each one with the next image that should have been opened in the first place. So it wasn't the handle/bar just being hidden.
    I did a system restore back to before a java update. Not sure if that update had anything to do with it, but the restore point did the trick, the first attempt at ACR opened multiple images just like it should have .. so.. problem still a mystery, but it's working now.
    thank you for the suggestion.. I'll still watch to see if others answer.. sure was weird

  • Images won't open in PS from Bridge and Camera Raw.

    I am suddenly unable to open images in Photoshop CS5 from Bridge or Camera Raw - what have I done wrong - how can I rectify it.

    Mullit wrote:
    I am also have a lot of start up problems with the computer itself and have lost a lot of my desk top, my internet search engine and various other things. Luckily all my documents and pictures are still intact though.
    This sounds serious.  I would make sure you have a backup on a seperate hd or disk or you photos and other documents.  If the drive fails you may loose everything on the hard drive.
    Check your free space and fragmentation on hd.  You should have about 20% free space.  So if you have a 400 gig drive you should have 80 gig free.

  • TIFF thumbnails are a logo & won't open in ACR except from PS

    Using Bridge 2.1.0.100, ACR 4.4, Photoshop CS3 10.0.1, Win XP Pro SP3
    I have two problems with TIFF files;
    1. They show as a logo instead of a thumbnail in Bridge unless I change their name (NOT the file extension, just any other part of the name)
    2. They will not open in ACR from Bridge, but will if I "Open as..." in Photoshop.
    Clearing the cache doesn't help, neither did uninstalling and reinstalling Bridge and Photoshop.
    In Bridge Preferences>Thumbnails I have Prefer ACR for jpg and tiff checked. When I open a jpg file it opens in ACR (there is no right click option listing ACR)
    What to do?
    Thanks!
    Al Stewart

    Read this link as see if if helps any.
    http://www.adobeforums.com/webx/.59b516f6/5

  • Bridge won't open raw files from my canon mark iii

    Bridge won't open raw files from my canon mark iii?  Are you kidding adobe? This camera has been out for over six months. Why isn't it loaded into the program? This camera is sooo main stream!

    What Mark III?
    Are you referring to the Canon EOS 1D Mark III or the Canon EOS 5D Mark III?
    And what version of Adobe software are you referring to?
    There definitely is support for the EOS 1D Mark III in in versions of the Creative Suite dating back several versions. Support for the EOS 5D Mark III was made available in an update to Creative Suite 6 and Lightroom 4.x.
              - Dov

  • My mac won't open video clips from my iphone in iphoto since upgrading to snow leopard. Help.

    My Mac won't open video clips from my iphone in iphoto in iphoto since upgrading to Snow Leopard. Usually I just used to double click and the video clip would open, now nothing happens.  Help please.

    Can you access the material via the Finder or Image Capture (in your Applications Folder) ?

  • Cannon Rebel XS EOS CR2 files won't open in CS6

    My photoshop is completely up to date, my RAW plug-in is up to date, and I even attempted to download the DNG converter all to no avail. No matter what I try my CR2 images won't open in anything. My camera is listed as one of the supported cameras. I've tried everything I could find on the forums and on other searches but still cannot get my files to open in Photoshop. The worst part is that they were opening last week prior to my updating. Are there any suggestions as to what I can do to get this solved?

    If you have CS2 the latest version should be ACR 3.7.
    ACR 4.x is only for CS3. If you download the 3.7 ACR and install it correctly ( be sure to follow the instructions precisely!) you should be OK.

  • Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

    Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There is a folder of camera profiles but no extension or plug-in with this name). How do I find out what version I have already? How do I get the correct version?  . . . OR . . . is it the case that Bridge will never open Sony raw files directly and I will have to do a separate conversion process every time I want to use a raw file??. Can someone explain this?
    Thanks.

    A Good samaritan answered this for me on another forum
    How to update Camera Raw

  • Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

    Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

    In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
    Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
    I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
    Having 2 versions of ACR will cause problems.
    You have already downloaded DNG Converter 8.7.1.
    Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
    Be aware that DNG converter is a stand-along application and not a plug-in.
    You need to open DNG converter at select the FOLDER that contain your .NEF files.
    Don't open the folder and try to select individual files, it doesn't work that way.
    After converting your D810 files to DNGs you can then open the DNGs in CS5
    The problem is your camera didn't exist when CS5 & its version of ACR was developed.
    i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

  • Bridge won't open JPG files in Photoshop CS3

    I changed my preferences to remove the check-box "prefer Adobe camera RAW for Jpeg and TIFF files" , restarted Bridge and tried to open a JPEG from bridge directly into photoshop. But double clicking on the image in bridge opened "paint".
    So I change the Bridge preferences back to Prefer ACR for JPEG again, restart Bridge, and then bridge tells me that it cannot find Photoshop CS2. CS2 is not even loaded on this machine anymore.
    So then I go to the file type associations preferences and "browse" to the CS3 version of photoshop, restart bridge, and double click on a JPEG and it again says that CS2 cannot be found. I change the association again using the "browse" to CS3 and then it opens the image up in "Paint" again.
    Why won't Bridge open JPEG's in ACR anymore?
    Why won't bridge open JPEG's in Photoshop CS3 anymore?

    Bill, thanks for the reply. But I do not think that the file associations is the answer here. If I am using bridge to open files in ACR or Photoshop, I do not believe that I need to change the windows file type association. I have other PC's where the file association is not photoshop and bridge works fine opening these files. In fact, when using windows explorer to navigate JPG files, I do NOT want photoshop being opened to preview these images. On my other PC's, I can both preview JPG's using windows picture viewer, and open the JPG's via bridge in ACR. Furthermore, Photoshop CS2 is NOT the application listed for JPG's in the folder options in the control panel. So the problem that I have here has something to do with Bridge or perhaps something is corrupted int he files.
    The reason why I suspect a corruption, is that not all files behave in the same manner in bridge. Some files with the same extension open as I would expect, while others do not. I did not realize this fact when I made my original post.

  • CS5 won't open NEF files from D600, despite updating camera raw plug in.  How do I fix this?

    CS5 won't open NEF files from D600, despite updating camera raw plug in.  How do I fix this?

    The D600 was first supported in Camera Raw 7.3 which is only compatible with CS6 and later - not CS5 unfortunately.
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Some options:
    FREE
    Download the free Adobe DNG converter, convert all D600 Raw files to DNGs then open the DNGs in CS5
    http://www.adobe.com/products/photoshop/extend.displayTab2.html
    PAID
    Upgrade to CS6
    Buy Lightroom 5.4
    Buy Photoshop Elements 12
    Join the Cloud and get CC (subscription only)
    Join the Photoshop Photography Program and get Photoshop CC + Lightroom (subscription only)

  • Aperture3 won't open raw files from my new nikon D5100

    Aperture3 won't open raw files from my new nikon D5100. It worked fine with my D40, but when I got the D5100 it wouldn't open the raw files from it. Is there an update for it?

    https://discussions.apple.com/message/15087160#15087160

  • HT1338 exe files won't open after downloaded from Safari on my Mac OS X 10.4.11

    exe files won't open after downloaded from Safari on my Mac OS X 10.4.11

    I use the free Unarchiver: http://unarchiver.c3.cx/unarchiver
    I have just tested it on a self-extracting Windows Internet Explorer and it opened it first time on my Mac.
    However, as you have been told, normally Windows executable files cannot be opened or used on Macs.

  • HELP - Trim marks in bleed area won't print

    Using Illustrator CS3 I have imposed an item 8up on the artboard with manually created trim and score lines within the bleed area. For some reason the lines will not print.
    - I have checked the attributes and the lines have not been selected as non-printing items.
    - I have created the lines with the line tool in registration colour and placed them 2mm away from the edge of the artboard.
    - In the print setup I checked the page trim marks on.
    - In the print setup I set the bleed to 5mm and when that did not show the manual trim lines I even tried 10mm.
    - When the document prints the only trim marks that appear are the page size crop marks applied during print setup.
    - The objects overlapping from the artboard into the bleed area print but the trim lines that do not touch the artboard won't print.
    I have previously been using CS2 and this method has been working fine until I upgraded to CS3. Has anything changed? Why is this no longer working? Is there a preference somewhere that tells illustrator to not print items that don't touch the artboard?
    Can someone please help as this is causing me lots of problems.

    Thanks for your quick response and link.
    While I was searching for a solution to this problem I actually posted on that site with another solution for importing files into InDesign with bleed. (Anonymous said... 2/15/2008 1:42 AM)
    I do find your post helpful for printing illustration files placed in Indesign. However is there no solution to printing directly from illustrator apart from increasing the document size?
    Is the bug only recent to CS3? I could print directly from Illustrator CS2 and the lines and bleed would print.
    If I group all of the trim / score lines would they print then?
    I don't understand why this has changed. How painful.

Maybe you are looking for