HELP! Cant get my Audigy Platinum to re-inst

I'm trying to reinstall my SB Audigy Platinum on a new computer. Actually, I get sound out of the card just fine - but I'm trying to install the programs from the original SB installation disk and when I do, it seems to partially install, but not completely. When I restart the computer, I get a window saying that its completing the sound card installation - but nothing happens from there. Oh, it also, at this point, is asking for my printer installation disk??
The computer shop may have installed some other SB software - maybe its in conflict? ... . I'm stumped.. maybe my original SB disk is bad.. ?
Help?

Could it be that I am on a Mac and on a PC you can access these panels without opening a page?
No, the differences between the Mac and PC versions of Dreamweaver are infinitessimal. There were quite a lot of differences several versions ago, but the CS3 versions are almost identical on both platforms. CS4 brings them even closer.
Following tutorials in a book is a good way to learn (at least, I hope it is - I write books about Dreamweaver myself). However, books can take you only so far. You need to start experimenting yourself. I wonder what will happen if I do that? Ooh, that's interesting! Eugh, I'll remember not to do that again...
That's how I learned about Dreamweaver - experimentation. Try it. It's fun, although a bit scary at times.

Similar Messages

HELP cant get it to get music, frusterated into te

ok, i got it for christmas, and i was realy looking forward to getting it going cause i have an mpc port in my car and i dri've alot, well...you get the drift, either way, i cant get it to work, i tried calling the customer support, but forgot they were closed, and now im stuck, and confused. there was no manual or n e thing on how to work the desktop items (media explorer and organizer, and i never got this toolbar thing they siad would be there) but anyway, i finaly got all of it figured out, got my musick on to thoes programs fine, and then transfered them to wat was supposed to be my zen...i took my zen, and went to go dri've, and realized..there was not music on it, so i pluged it back in, and now it wont prompt the transfer, and so i checked through the computer to see what was actualy on my zen, and it says my songs are on it and its in a playlist, but THEYRE NOT im so confused, dont know how to work the organizer, or explorer, and all i want is my music...can anyone help?

Right it seems we are not alone, i ran a search in the forum - this particular problem with MacPros appears to have been around since February 2008 but none of the posts got a reply so I guess the issue is lying dormant. I'm going to call AppleCare tonight and report it and if they don't have a solution I will be requesting a refund until it's sorted out. After my £4k G5 Quad died for hardware faults just 15 months down the line I'm particularly wary of quality control and don't want to burned twice at this price.

Help cant get i photo to stop running

hi im typing on lab top while my mac 24 inch is going besserk beside me,earlier i was trying to get some pictures off digital scan card onto my computer,(+note the pictures were erased and reinstalled on the card as my wife erased them accidently and a guy on cruise ship re found them via his computer)..anyway them seemed to be there loading on my computer taking some time my daughter said just shift it into i photo ....theres where we are for 4 hours now slideshow of pictures from my computer keeps playing ....not ones on card and i cant get out or turn computer off or anything HELP....

I'm not entirely sure I fully understand your issue, but just hold down the power button until the iMac powers down. Then reboot. Let us know if iPhoto behaves when it comes back up.
Matt

Dear Jeremy-CL ! Please help me with SB1394 Audigy Platinum ex issue

I have an Audigy Platinum Ex for 4 years and very satisfied . But now i had to install Windows XP SP2 .My firewire sb394 began malfunction with Premier Pro ,5 . Under Windows XP SP everything goes well . With rear motherboard FireWire connector everything works well , but not so comfort like using external Dri've . How can I resolve this problem ? And is it possible to connect internal sb394 cable from Audigy Platinum ex Dri've , to motherboard ASUS P4P800E deluxe internal connector ? It seems to me that they are similar . Best regards from Russia / thank you ! Alexander

You can try this if you have nerves to do it:
. Get Windows XP SP install CD
2. Find following files and uncompress them if necessary
- 394bus.sys (5..2600.06 xpsp.020828-920)
- arp394.sys (5..2600.06 xpsp.020828-920)
- enum394.sys (5..2600.0)
- nic394.sys (5..2600.06 xpsp.020828-920)
- ohci394.sys (5..2600.06 xpsp.020828-920)
- 394.inf (5..2535.0)
3. Open command prompt, type sfc /purgecache and press enter key
4. Copy file 394.inf to C:\WINDOWS\INF overwriting existing file
5. Copy files with names ending in .sys to C:\WINDOWS\system32\dllcache
6. Copy all .sys files to C:\WINDOWS\system32\drivers overwriting existing files
7. If windows asks for CD cancel it to prevent it to restore files
8. Double check if the files you copied are still there and if not repeat from step 3 until you get it right
9. Uninstall firewire adapter from device manager
0. Reboot and pray
Basically that should force your XP SP2 to use Firewire drivers from XP SP. It may not work (I haven't tried it) and it may trash your machine leading to reinstallation but it may also fix things for you. Let me know if it worked.

Help: Cant Get my HeadSet to Work

Hi Guys
Need help urgently here. Just bought 2 Internet Headsets. I am using:
MSI 6566 mainboard, 845E Max 478 Socket. Win XP PRo. I cant seem to get the headset connected to this mainboard to work.
The other one I connected to my laptop. It is working fine. I've interchanged the headsets and tested both are working fine.
TESTS Done:
1. mainboard drivers are updated
2. interchange of headsets. Both r working.
3. sounds and audio device in Control Panel tested fine. I can see the meter running when i speak into my headset. I can even hear the playback. so that means the mainboard recognizes this.
However when i log on to the net and start up my Messenger, i just cant hear the other guy talking, whereas when i speak the other guy can hear me. I am running a Home LAN now.
This doenst makes sense. Any other settings i shoudl take note:?????

Dont think it's my headsets are both sets are testd successfully on my laptop.
I've even make sure the audio and sound settings in Control Panle are identical on my laptop and PC.
The funny thing is that I tested the hardware successfully also on my PC. It can receive my voice and playback as well BUT, I just CANT talk and hear anything when I log on to my messenger whereas the other person can hear me clearly.

Help - cant get back to desktop

I booted my powerbook using command+s. How do I return it to the normal desktop?? Every time it turn it on it just loads up a page that looks like terminal -black with white text.
the message it displays is
etc/master.passwd: No such file or directory
-sh-2.05b#
Other than that there was no issue. I was following instruction in case you lost your SU cd's and cant remember your password. it was telling me to mount a different drive...maybe thats where the trouble is? any help would be great

llkk:
Welcome to Apple Discussions.
Try this:
Shut down computer.
Hit Power button and immediately after chime hold down Option key.
If your OS X volume shows up select and click straight arrow.
Good luck.
cornelius

Prepared Statement help -- cant get it to work :(

Context initialcontext = new InitialContext();
          DataSource datasource = (DataSource)initialcontext.lookup("java:comp/env/XYZ");
          Connection conn = datasource.getConnection();
          String UPDATE = "update query with ?s ";
          PreparedStatement pstmt = conn.prepareStatement(UPDATE);
          pstmt.setString(1,title);
          pstmt.setString(2,desc);
          pstmt.setInt(3,1);
          System.out.println("2a");
          pstmt.executeQuery(); ------- STUCK HERE
          System.out.println("2b");
          pstmt.close();
It goes between 2a and 2b and just stops working.. no errors nothing...
I have been trying to get this working the entire day... with no luck... any suggestions........

I am familiar with a few dialects of SQL. I've never seen
UPDATE <tbl> WITH...
What RDBMS are you using? I just searched the mySQL documentation on the keyword WITH (case sensitive) and found no form of update that uses it.
The ANSI SQL UPDATE statement takes the form...
UPDATE <tbl> SET <col> = <value>[, <col> = <value>...]
Also, you have three calls to setString, but only one ? in your String UPDATE indicating a position for a parameter.
http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html
Hope this helps. If there is a form of UPDATE that uses WITH, please provide me with a reference link. I'm supposed to know SQL. :-)

Datapump help - cant get it to work

This is my script:
create or replace directory EXPORT as 'e:\aia\backup\dmp\';
declare
l_dp_handle NUMBER;
begin
l_dp_handle := DBMS_DATAPUMP.open(
operation => 'EXPORT',
job_mode => 'SCHEMA',
remote_link => NULL,
job_name => 'GTAIATB4_UPGRADE_EXP4',
version => 'LATEST'
DBMS_DATAPUMP.add_file(
handle => l_dp_handle,
filename => 'GTAIATB4_UPGRADE2.dmp',
directory => 'export',
filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_DUMP_FILE
DBMS_DATAPUMP.add_file(
handle => l_dp_handle,
filename => 'GTAIATB4_UPGRADE2.log',
directory => 'exportT',
filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_LOG_FILE
DBMS_DATAPUMP.metadata_filter(
handle => l_dp_handle,
name => 'SCHEMA_EXPR',
value => 'IN (''GTAIATB4_UPGRADE'')');
DBMS_DATAPUMP.start_job(l_dp_handle);
DBMS_DATAPUMP.detach(l_dp_handle);
END;
I want to export everything that belongs to the schema called GTAIATB4_UPGRADE.
this is the result:
SQL> declare
2 l_dp_handle NUMBER;
3 begin
4 l_dp_handle := DBMS_DATAPUMP.open(
5 operation => 'EXPORT',
6 job_mode => 'SCHEMA',
7 remote_link => NULL,
8 job_name => 'GTAIATB4_UPGRADE_EXP4',
9 version => 'LATEST'
10 );
11 DBMS_DATAPUMP.add_file(
12 handle => l_dp_handle,
13 filename => 'GTAIATB4_UPGRADE2.dmp',
14 directory => 'export',
15 filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_DUMP_FILE
16 );
17 DBMS_DATAPUMP.add_file(
18 handle => l_dp_handle,
19 filename => 'GTAIATB4_UPGRADE2.log',
20 directory => 'exportT',
21 filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_LOG_FILE
22 );
23 DBMS_DATAPUMP.metadata_filter(
24 handle => l_dp_handle,
25 name => 'SCHEMA_EXPR',
26 value => 'IN (''GTAIATB4_UPGRADE'')');
27 DBMS_DATAPUMP.start_job(l_dp_handle);
28 DBMS_DATAPUMP.detach(l_dp_handle);
29 END;
30
31
32 /
declare
ERROR at line 1:
ORA-39001: invalid argument value
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3444
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3693
ORA-06512: at line 11
Also, can someone tell me how I can delete the jobs that were created as now I have to keep adding job names ie 'GTAIATB4_UPGRADE_EXP4' started as 'GTAIATB4_UPGRADE_EXP', then 'GTAIATB4_UPGRADE_EXP3' etc etc

There could be lots of things wrong with this pl/sql script. If you need to change the job name every time, then I can tell you that at least the open is happening, because it is creating the master table. After that, I have no idea what is happening. One thing I would do is to add some sort of debugging into the code so you can figure out what is happening. I use an internal tool to help debug pl/sql, but a simple thing would be to do an insert into a table after every call. Something like this:
first create a table that is owned by the schema running the job.
create table debug_tab (a number);
then in the code, I would put a statement like this after every datapump call:
insert into debug_tab values (1);
commit;
then
insert into debug_tab values (2);
commit;
etc. Then after you run your script, look to see what is in debug_tab. This will tell you how far you got. Some of the things I would look at would be to make sure that the directory exists.
Actually, I think I just saw it. For the dumpfile, you have the directory as 'export'
for the log file, you have the directory as 'exportT' <---- you have both lower t and upper T. This is probably your problem.
As for getting rid of existing jobs,
select * from user_datapump_jobs;
then
drop table 'job_name';
This will get rid of the Data Pump job.
Hope this helps.
Dean

Please Help, cant get 8i Enterprise working on my system...cant get into sql plus

Hello,
I am trying to get my oracle 8i working. I installed it, and it went ok, except two optional programs didnt work, though it was recommended to get them working, i didnt know how and just went on. Also some of the programs are not working either...which i dont understand since the software installed successfully.
I am using 8i enterprise on my win2k system. I am not on a network and am using it only on my local machine. I CANNOT get into Sql Plus as it is asking me for a user/password/host string. i tried so many combinations. scott/tiger, system/manger, sys/system_change_on_install and various other things on this discussion board.
Nothing is working for me and I have no idea whats wrong. I have used installed Oracle systems before and used to just login those systems as scott/tiger and no problems. This is the first time i have installed it from scratch and i havent been able to get into the system.
Any help would GREATLY be appreciated. Thank you.

the programs that do not work are:
Database Configuration Assistant
INTYPE File Assistant
Net 8 Assistant
Net 8 Configuration Assistant
Net 8 Easy Config
I click the programs and nothing happens. Not sure even if something is supposed to happen though.
the error when i type in the pass/user is:
ORA-12560: TNS: protocol adapter error
thank you for helping.
samir.

HELP cant get past the start up screen

Hi all!
Today my computer was running super slow so I was forced to restart it by holding down the power button, however, when it began to start back up it never made it past the start up screen. Ive tried multiple things to try and get it to start up again, resetting it, keeping it plugged in in case maybe the battery was dead, and it wont even let me start it in safe mode. The light on the bottom right corner that I think normally lights up isn't lighting up now either, I dont know if I need a new battery or if the computer needs to be sent in to be repaired, or whats going on. Does any one have any suggestion about what I should do?? I'm sure there are multiple things im not trying because I'm unaware of them, so if any one has ANY suggestions that would help! thanks!

If it is not seeing the WiFi network and will not connect you can try restarting that one iPad and then try again. If it still will not cooperate, activate it using iTunes on a computer and then troubleshoot the network connection after the device is up and running.

PLEASE HELP cant get online.

Hello,
I am having trouble getting online with my other lappy. I have 2 computers, one for me and one for my girlfriend. we have a wireless network and it works on one and not on the other. safari opens but only the "you are not connected to the internet" appears.
I have reset the PRAM and NVRAM
and i also reset the system management controller.
If someone can suggest something please do.
Thanks in advance

Greetings,
First of all, PRAM and NVRAM have nothing to do with connectivity, so fiddling with that won't help you. If one of the laptops connects but the other doesn't, the most logical conclusion is that there is something different in the settings on the one that doesn't connect. You should check those very carefully and be sure they are identical in every way.
Instead of using wireless, try plugging both of them into an Ethernet connection so you can verify that they both work normally using that method, too.

Help: cant get values from a resultset

i have a class that contains all my MySQL statement and i am trying to use the results found from one of my select statements to pass on into another class which displays the results in a gui form. Here is my query:
public void profile(String user)
        try
             Class.forName(driver);
             Connection con = DriverManager.getConnection( url,db_user, db_pass);
             String username, name, email, dob, bio, gender, homepage, number;
             //find username and select all details
             String find = "SELECT Username, Full_name, Email, dob, Biography, Gender, Homepage, Contact_number FROM users WHERE Username = ? ";
             PreparedStatement ps1 = con.prepareStatement(find);
             ps1.setString(1, user);
            ResultSet rs = ps1.executeQuery();
            while(rs.next())
                //retreive information from the server
                username = rs.getString(1);
                name = rs.getString(2);
                email = rs.getString(3);
                dob = rs.getString(4);
                bio = rs.getString(5);
                gender = rs.getString(6);
                homepage = rs.getString(7);
                number = rs.getString(8);
                User_Profile profile = new User_Profile(username, name, email, dob, bio, gender, homepage, number);
                JOptionPane.showMessageDialog(null, username + bio + email, null, JOptionPane.ERROR_MESSAGE);
              con.close();
        catch( Exception e )
                 e.printStackTrace();
                 JOptionPane.showMessageDialog(null, "error," + e.getMessage(), null, JOptionPane.ERROR_MESSAGE);
    }As you can see, i am trying to pass on the variables username, name, etc to a new instance of my user_profile class but it doesnt for some reason. i dont get any comple errors so thats ok. i created messege dialog box from within the while statement above to see if a value is stored, and yes their is a value stored in my variables
below is the user profile class which shows my constructor that suppose to get the values from the query class in this code entered above       User_Profile profile = new User_Profile(username, name, email, dob, bio, gender, homepage, number);
    protected String username;
    protected String FullName;
    protected String Email;
    protected String DOB;
    protected String Biography;
    protected String Gender;
    protected String Homepage;
    protected String Con_Number;
    protected String crnt_user;
public User_Profile(String user, String name, String email, String dob,
                            String bio, String gender, String homepage, String number)
        initComponents();
        addWindowListener( this );
        //get values from sql query and store them here.
        this.username = user;
        this.FullName = name;
        this.Email = email;
        this.DOB = dob;
        this.Biography = bio;
        this.Gender = gender;
        this.Homepage = homepage;
        this.Con_Number = number;
     }the code below is used to display one of the values received from the query class, in this case returns null..
txt_name.setText(username)

Does the user String match the database String
exactly?
Some databases are case sensative.Sorry posted before done.
Also, ensure you do not have trailing spaces in one or both. I remember Oracle had this problem a few years ago using the Type 4 driver but not through ODBC.

**Help** Cant get into my itunes due to error message....whats wrong ! Help

Error message says....
"Itunes cannot run because its detected a problem with your audio configuration"
What does this message mean? My itunes was working fine yesterday. I have tried installing it today but this has not worked.
I would appreciate any help here.
Thanks.

Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes 7 for Windows: iTunes has detected an audio configuration problem

Help cant get photos to appear with advanced loader pro component

Im tryign to make a portfolio site Trying to use the Advanced loader pro component to get the photos to appear. I am following the instructions here
file:///C:/Users/User/Desktop/Tutorials/Flash%20plug%20in%20instructions/Advanced%20Loade r%20PRO%201.0.1/Guide/index.html
But nothign is happening when I test locally using pubish preview or online when uploaded.
This is whats in my component paramters in properties
Autofeeder file - autofeeder.php
c:\users\me\documents\website\test folder\autofeeder.php
Autofeeder folder is the image folder in the folder with the swf files.
c:\users\me\documents\website\test folder\images
in test folder as the swf files, autofeeder.php file and images folder containing the images to show
The swf file is.
aboutme.swf
in Image folder
sketch1.jpg
sketch2.jpg
sketch3.jpg
under source for the values
sketch1.jpg
sketch2.jpg
sketch3.jpg
under caption
caption1
caption2
caption3
Picking random effects (just want it working so have 2 wipes
effect strenght8
effect speed 44
showtime 15
captionTextfield
the same name as my dynamic text box instance
captionTextfield
scale content = scale to fit
on rollover zoom 100%
Show pre loder is ticked and show preload
pre loader width 100
target _blank
enabled
visible
Please what am I missing here who no photos as need this to get work
And min height and width 500
Please what am I missing here who no photos as need this to get work
his is rough as just trying to get it to work yet I see no picture/photos on the stag with the component and nothign when I try a flash preview locally on computer or publishtest movie...
What am I doing wrong why no pictures please

Never mind I got it working right my photos are appearing now.

Please Help: Cant' get Windows computer to see network printer

Hi,
I have my printer shared on our network directly into the airport. All of the Macs can use it no problem, but when we try to get a Windows computer to access it, we're having no luck.
I followed these direction I found on Macworld:
AirPort printer sharing isn’t restricted to Macs: Windows PCs can also use an Air-Port print server. To set this up, you’ll need the AirPort’s IP number. (By default, it’s at 10.0.1.1.) With the PC attached to the AirPort wireless network, open the Add Printer wizard in Printers and Faxes. Following the steps in the wizard, create a local printer, deselecting the Automatically Configure option. Next, click to create a new Standard TCP/IP Port, and enter your AirPort’s IP number in the IP number field. If the IP number is 10.0.1.1, the queue name should automatically fill in as IP_10.0.1.1. In the next screen, select Standard as the device type, and then specify Hewlett Packard Jet Direct. Finally, click on Finish, and then select your printer make and model from the list of available drivers.
but had no luck as well.
I'm trying to connect to an HP Lasterjet 2200.
Thanks,
-Tim

I fixed the problem. I coudln't get the Windows machine to find it on the network unless it was actually plugged into the USB port of the Airport Extreme.

HELP! Cant get my Audigy Platinum to re-inst

Similar Messages

Maybe you are looking for