HELP cant get past the start up screen

Hi all!
Today my computer was running super slow so I was forced to restart it by holding down the power button, however, when it began to start back up it never made it past the start up screen. Ive tried multiple things to try and get it to start up again, resetting it, keeping it plugged in in case maybe the battery was dead, and it wont even let me start it in safe mode. The light on the bottom right corner that I think normally lights up isn't lighting up now either, I dont know if I need a new battery or if the computer needs to be sent in to be repaired, or whats going on. Does any one have any suggestion about what I should do?? I'm sure there are multiple things im not trying because I'm unaware of them, so if any one has ANY suggestions that would help! thanks!

If it is not seeing the WiFi network and will not connect you can try restarting that one iPad and then try again. If it still will not cooperate, activate it using iTunes on a computer and then troubleshoot the network connection after the device is up and running.

Similar Messages

  • HT4623 i cant get past the resuce email screen during the upgrade

    i cant get past the resuce email screen during the upgrade

    Hello DionSimmons,
    The following article provides information and troubleshooting steps that can help get your iPhone activated.
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    Cheers,
    Allen

  • My Macbook won't get past the start up screen

    Hey everyone
    I have a Macbook that's about 3 years old. I did an software update yesterday and since doing it the computer won't get past the start up screen. There's just the Apple logo and the rolling ball thing. It's been stuck there for around 30mins and nothing changes. I'm not really sure what has happened but I was wondering if there is any way I can fix it.
    Thanks for your time.
    Bevan

    Hey Lyssa
    I don't have a back up but I'm not to worried about that as it's my traveling computer and I only use it for the web and some word processing.
    I don't have the disks with me right now as I'm away from home. I'm not sure what I had updated, I think there was a lot because I hadn't don't it in a long time.
    If I can start it in safe mode what should I do?
    Thanks.
    Bevan

  • Cant get past the starting mac os x screen

    hey im posting for my brother.. he has a macbook and now when he turns it on he cant get past the blue "starting the mac os x" screen its just stuck there.. HELP ?!?

    Start up from the disk that came with the computer (or an upgrade disk). (Insert the disk, hold down the “C” key-it takes awhile so be patient. If it starts up to the install screen, click continue in the window that first appears. Then select “utilities” in the finder menu and select "disk utility”. Your HD should show up in the sidebar window. Highlight it and click the "repair disk” button. Come back with your results.

  • TS1559 I cant get past the choose network screen

    I cannot get past the choose a network screen

    Hello DionSimmons,
    The following article provides information and troubleshooting steps that can help get your iPhone activated.
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    Cheers,
    Allen

  • My serial number is not recognized and I cant get past the first setup screen. What do I do?

    I cant get the installer to recoognize my serial no. What do I do

    As well as the new download you will need the new serial number. You cannot use your original serial number.
    (Don't expect it to work on modern versions of Windows or Mac OS though!)

  • When I turn on my MacBook on, it doesn't get past the start up screen up screen

    When I turn on my macbook, it turns white and then the apple comes up. Then the pinwheel appears. After that, it just keeps spinning and nothing happens. What is the problem???

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 8
    This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

    Imac frozen at blue screen after i went into disk utilities and cleaned  free space.
    I tried holding down T key as it reboots
    and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
    to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
    please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
    Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
    Thanks

    i tried all this thanks
    i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
    no matter what you tell me
    Am i right ok in thinking that
    when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
    i came back and there was no progress bar just the box so i quit the program and when i opened  mac mail the system just froze  i forced quit mail rebooted and blue screen death
    Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
    basicly is my hard drive full of 00000  is this why im getting this message  because the process was interupted
    I need to know if i need outside help i bought the computer on line on  amazon uk  what dose one do next

  • My husband has 1 of the newer macbook pros  that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

    my husband has 1 of the newer macbook pros  that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

    Hi...
    Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
    he cant use his key board
    You'll need to use a wired (USB) keyboard.

  • Help ! i have done an IOS 5 udate and cant get past the track my iphone set up screen. i have done restored 3 times. going crazy

    Udated to ios 5 and cant get past the find my iphone screen.

    Try deleting an other icloud backup and see if it will automatically backup.

  • HT2173 my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto  app on my iMac bc a visa vas about 3:15 min

    my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto  app on my iMac bc a visa vas about 3:15 min.  What should I do to get my imac past this?

    According to your posted Profile here you are running a PPC based iMac.  This Forum is only for "Intel iMac's", and so to get the expert and correct help you need you should repost your question in the "PPC iMac Forum".
    Hope this helps

  • Curve 8900 won't get past the T-Mobile screen on start-up

    I am hoping that someone out there can help. My T-Mobile BlackBerry Curve 8900 does not make it past the T-Mobile screen on start-up. The battery was fully charged when this happened. Personally, I think it has to do with iHeart Radio crashing, but I could be wrong. I have tried to plug the USB cord into a rear port on my laptop and launch the Blackberry Desktop Manager to see if I could do anything, but nothing happens. The BB Desktop Manager does not connect to the phone, because it is not getting past the T-Mobile screen on start-up. Not sure what to try.

    Hey VTX1300R,
    Do you have a recent backup of you device? If so the you may want to try to do a reset to factory on the device. Have a look at this article to see how to do it. http://bit.ly/98bCNO
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • HT4623 I "updated" my iPhone4S 16gig this morning and can't get past the "Rescue Email" screen.  I entered emails as well as opted out.  I have gone back, but Apple ID Security insists I add security questions and mail.  HELP!

    I "updated" my iPhone4S 16gig this morning and can't get past the "Rescue Email" screen.  I entered emails as well as opted out.  I have gone back, but Apple ID Security insists I add security questions and mail.  HELP!

    Claudius,either you didn't read my post, or you jumped to conclusions. I had a skype account that was created using a microsoft account (NOT THE ACCOUNT I AM USING NOW). PURE MICROSOFT ACCOUNT NO OTHER ACCOUNT LINKING.I had to change the primary mail of that account.I was told "no can do" by skype support.I found that if I went to account settings and clicked on the link on the line below the one that said "MICROSOFT etc" (labeled something along the lines of "TV or Device") I got the opportunity to set the password of the "live:username" account (WHICH YOU COINCIDENTALLY HAVE TO DO IF YOU WANT TO USE SMART TVs ETC).Once that was done, I COULD SUCCESSFULLY DO WHAT SKYPE SUPPORT SAID WAS IMPOSSIBLE- I could change the primary mail address. once that was done, and NOT BEFORE, I linked the account to a facebook account as well, just to be sure I have more than one way to access the skype account. What caused you to get the impression that I was writing something else? furthermore this sentence - "The solution you described in your initial message isn't actually once since all the time you were operating on different account that weren't actually linked" does not make sense, I think you mis-edited it.and I need to point out that you are incorrect. I WAS NOT OPERATING ON DIFFERENT ACCOUNTS I WAS OPERATING ON ONE SKYPE ACCOUNT, THAT WAS CREATED USING A MICROSOFT ACCOUNT just like you say you recommend. I still don't know how you can misread my initial entry like that.  If you have a better solution to my initial problem - changing the primary mail of a skype account created throuth either a microsoft account or a facebook account, Please write a sticky to explain how to do it, and please inform skype support that Yes it can be done, and this is the way it is done. So far my "lucky shot" seems to be the only way to do it.     

  • My macbook air won't get past the white apple screen.  I've tried power cycling the batter but won't help

    my macbook air won't get past the white apple screen.  I've tried power cycling the batter but won't help

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I can't get past the grey apple screen using mavericks

    I can't get past the grey apple screen trying to boot up with Mavericks. I had been using Mavericks for about a month (only had issues of freezing occasionally). I read in one of the posts here that I should try holding command R down when booting. I did now I just get a grey screen without the apple.  Any advise?
    I have a Mac Mini

    Hello ther cnickers,
    It sounds like the initial install of Mavericks went ok, and you have been using it for a while, but now cannot boot to your desktop and are stuck at a gray screen with an Apple logo. I would recommend a couple of things here:
    First, try performing a Safe Boot to see if that will load up for you. If so then leave Safe Boot and restart from the Apple menu to try and get to your deskop:
    To start up into Safe Mode (to Safe Boot), follow these steps.
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key.
    The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
    After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
    To leave Safe Mode, restart your computer without holding any keys during startup.
    From: Mac OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/ht1564
    If that works fine, I would next also verify and repair your disk if needed.
    Disk Utility 12.x: Repair a disk
    http://support.apple.com/kb/PH5836
    Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
    If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

Maybe you are looking for