Help! cant load Java due to missing file

I have tried to load Java on my pc which is running XP and I get this error message.can anyone help please........
it says this file is missing.
http://jdl.sun.com/webapps/download/getfile/1.5.0_02-bo9/windows-i586//jp150020.cab.
without this I am unable to download the Java and am ready to rip my hair out!
Thanks

M'am,
Eh?
You are having problems downloading or installing Java. Is that the issue?
If you are having problems installing then I would suggest you uninstall whatever you do have and get download again and install the new download.
If you are having problems downloading... well that sounds like a browser issue.
If you need more help then consult this page
http://java.sun.com/j2se/1.5.0/download.jsp
There are Installation Instructions for each download which may be of assistance.
Sincerely,
Slappy

Similar Messages

I get the message: Installer failed to initialize. This could be due a missing file.

I get the message: Installer failed to initialize. This could be due a missing file. Could someone help me?

The installer for what product? On what operating system?

Installer failed to initialize.this could be due to missing file.please download adobe support adviser to detect problem.

getting the message while installing cs 6 trial
-installer failed to initialize.this could be due to missing file.please download adobe support adviser to detect problem.
please help

Error "Installer Failed to Initialize" | Install desktop application | Windows

Have tried to open my itunes and the message given states that itunes can not be opened due to missing files. Please reinstall itunes. Repeated attempts to reinstall give the same result...any ideas?

Have tried to open my existing itunes but it states that it can not be opened due to missing files...please reinstall itunes. Repeated attempts to reinstall are to no avail....any ideas?

I assume you are talking about iTunes on your computer, if so, you will have to remove all Apple programs associated with iTunes:
iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support (iTunes 9 or later)
Make sure everything that is by Apple is removed including Safari. You can sort by "Publisher", when you uninstall programs. Make sure you have at least one other web browser (like Firefox or Internet Explorer) before removing Safari. That way you can go back to the Apple web site and redownload iTunes later.
Reboot the computer then reinstall iTunes. Everything should work normally.

How do I fix error: cannot sync ipod due to missing file

I have 4th generation ipod shuffle, but after having to do some work on computer, ipod no longer will sync and load purchased songs to my ipod. I have updated everything and reinstalled itunes. It starts to sync but then stops. I finally got an error stating it was due to a missing file. Help.

Refer to this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368

Cannot install driver due to missing files - BlockSysUser and hpzpnp.ice_suffix

I have just purchased a new Dell with Windows 7 64-bit and am trying to install the driver for my oldie-but-goodie OfficeJet 6310. I am having the same problem with BlockSysUser as has appeared numerous times, and have tried all of the posted solutions. I downloaded the driver from the website.
I can get past the BlockSysUser issue by creating another folder called ".SourcePath.setup" and copying the BlockSysUser file that resides in Setup. However, I then get a missing file hpzpnp.ice_suffix.exe, which I cannot find in any of the other folders. It seems to be looking for this also in ".SourcePath.setup".
I can install the printer using Windows, but then I don't have the other good stuff.
This problem seems to have been around for YEARS! Why hasn't it been resolved through driver updates?
Help!

Hi DForm,
It's okay regarding the log file, I did some more research for you and found these steps:
Turn off Anti-Virus (McAffee in this case). How to Disable McAfee Antivirus.
Disabled the firewall. Turn Windows Firewall on or off.
Perform a L4 uninstall. (a) On the keyboard, hit the Windows and "R" key, then type %temp% and hit enter. b) Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders). c) Open folder "Util". d) Open folder "CCC". e) Please run the L4uninstall.bat. f) When the uninstall has completed, restart the computer).
Disabled startup and non MS services. Disable startup items and non-Microsoft services.
Restart the computer.
Run setup as admin. How do I run an application once with a full administrator access token.
Hope this solves the issue, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Need help in loading data from a csv file to a table in Oracle DB

Hi,
I am using sqlplus as a client to connect to the server.
I am trying to load data from a csv file from a client to a table in Oracle DB server.
I am trying to use the below command
" LOAD DATA INFILE 'test.csv' INTO TABLE testTable FIELDS TERMINATED BY ',' (test1,test2,testc3,testc4); "
But, I am encountered with the following error
"SP2-0042: unknown command "load data" - rest of line ignored."
Thanks in advance.
SB

Hey Frostmann,
That was a nice post....
I changed my mind to use an 'Insert into' statement from a shell script.
I created a DB table named test and I tried using the below shell script to insert a row in the table.
sqlplus test/test@test <<ENDOFSQL
INSERT INTO test VALUES('test1',123,'test2','test3');
exit
ENDOFSQL
A row is succesfully inserted into the table when I run the script manually, but it does not insert rows when a cron job is scheduled.
Could you please help me with this?
Thanks in advance.
SB

CS6 Installation Failed due to missing files.

I m having problem with the Adobe CS6 Design & Web Premium installer now.
It keeps saying missing files. I was installing my CS6 from DVD yesterday on my new Macbook Air. then the whole laptop hanged for a good 3 hours. So i did a cold boot. After restarted my mac, i launched the Installer in the disc and it prompted the Missing file error message.
Installation Failed. Installer failed to initialize. This could be due to a missing file.
More troubleshooting tips:
1. Restart your computer.
2. Exit all applications including startup items, virus checking and firewall software.
3. Launch the installer and reinstall your applications.
I was not able to get pass this stage after numerous retry. Apparently the installer has already installed Bridge and some other components successfully. I tried to access the installer from the Utilities, but i met with the same error.
Would you be able to advise me how to proceed from here? Thank you very much.

Hi kglad,
thanks for the reply. i did try to uninstall by using Utilities > Adobe Installers > Adobe CS6 Design & Web Premium installer, when i click the icon, i get "Uninstall Failed" error, it says:
Your uninstallation encountered errors.
Troubleshooting tips:
1. Restart your computer
2. Exit all applications including startup items, virus checking and firewall software
3. Uninstall again.
I have done all the above at least 3-4 times and also downloaded the cleaner tool, and ran it, but not items was listed for cleaning.
Any idea how i should proceed?
Thank you.

Can't burn due to missing file

I'm working on a project that I started quite a while ago and I must have deleted a video clip. Anyway I want to burn, but I can't because of the "missing file" error box. I've tried doing a "Save as", repaired permissions and restarted. I'm fairly new at this, so I'm looking for a simple solution. I really don't need the missing file, so how can I just go ahead and burn without it?
eMac Mac OS X (10.4.4) iDVD 5

Hello Elizabeth - I think you'll need to address the basic problem, ie., find the missing video and move it back so iMovie can find it, or re-edit the video in iMovie so the missing piece isn't needed. One strategy is to delete the video from iDVD, then go back to iMovie and repair that part of your production that is missing (or move it back so iMovie can find it). When you re-import the video back in to iDVD, it should work better. You may also want to look around in the forums here for hints about making the burn smoother (maintenance tasks, good quality disks, slow burning, etc.). John
G5 2.0, G4 400, IIGS Mac OS X (10.4.5)

Error message that it cant be opened because of missing files.

I am trying to download my Elements 12 and I keep getting a message that I can't open it because there are missing files. Any suggestions?

From where are you downloading?
Try here:
Download Photoshop Elements products | 13, 12, 11, 10
or here:
Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools

I cannot do a full system recovery due to missing files and I don't have a recovery disc

At startup, I continue to get a message to activate windows. When I try to do this, I get message that some files are missing. The computer will not allow me to go back to the earliest system restore, nor will it allow me to do a full factory restore. I have been having problems since the time I did an online upgrade from Windows 8 to the 8.1 version. The original factory warranty expired on 02/04/15. I have contacted t, he Costco Consierge Service, HP and Microsoft to no avail. When I purchased the computer from Costco, neither the computer, not the box it came in had a Windows 8 activation code on them. Can someone please help?

Enter the BIOS and load the HP Factory default keys. That should take care of it. BTW, if you do end up having to pay for the factory prepared HP USB recovery media, it only costs about $25.00 USD.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My Satellite A notebook does not start due to missing files

I have a Toshiba Satellite and at the start of every month is ***** out.
I brought it brand new about 2 years ago and at the start of every month it will not go into windows.
It wont even let me into safe mode or anything and it is not a virus as I expected it to **** out tonight.
So I did a virus scan and nothing showed up and then half an hour later it died, right on schedule. Im sick of this as each time it dies I have to use the recovery disk and it wipes everything. I have on there and after 2 years of having to restart everything all over again each month. Im ready to "accidentally" drop it in the pool and claim insurance on the dam thing. I dont get me wrong its great till the first of every month and without warning it just goes really slow, and when I restart it, it says a file is missing and wont boot up.
The weird thing is........... it is always the same time of the month and since today is the 4th it died so at Im on my 8s computer typing this while my Toshiba is restarting all over again.
IF U THINK, YOU CAN TELL ME WHY THIS IS HAPPING I will love u forever.
Im just so sick of having to reload everything and like last month I expected it to kill itself. So I did all the scans and cleaned it up.
But no it still died right on schedule..........hmm plz help

Hi sorry can't actually give you a solution to your problem but would say sounds as if you never thought to buy extended warranty on it, also if it did this within the first year what did Toshiba say about it as surely you asked them to look into it and if not, sorry but why on earth not? I can see why you thought it was a virus but sounds to me(not technically trained but using logic) that if it does it at the beginning of each month then its something wrong with the actual computer that deals with the clock and might be worth emailing Toshiba themselves and explain it to them and see what they say or take it to a computer shop and explain and ask them to look at it and see if they can find out what is causing it as sounds as if it's been doing this from the time you first bought it.

If I buy quicktime 7 pro, will it help me load h.264 encoded .mov files in PREL13?

Presently in PREL13, when I attempt to playback any of a group of about 100 video clips all encoded with h.264 in a qt.mov container, they skip or halt, initially the video, then the audio as well. Rendering does not help. I installed the latest version of regular QuickTime, and the video play is the same. I don't need to do any extremely complicated editing here, but I can't really do any if I can't reliably determine start and end points, or really establish video content at all. I cannot pause or seek or really anything. It's possible that my old slow computer just can't hang. Video plays acceptably in QT regular player, seekable, pause/play works fine.
Will there be any advantage to buying the pro version? What would my work flow look like? Could I skip intermediary file steps and work from the original video files?

So unfortunately, I don't know the camera settings.
I only bought quicktime because I thought it would help me work with these videos.
Back to your initial questions shortly. In that regard, what is the file extension of these 100 videos...mov or qt?
The file extension is .mov. I didn't entirely follow the other stuff. As I said, the two programs are reporting different information about the same file.
Additionally, I can report what MediaInfo says about the same file (which seems a little more comprehensive, including for instance that it was shot on a canon, in AVCHD 1080i60:
General
Complete name                            : X:\XXXXX\XXXXX\Clip #1.mov
Format                                   : MPEG-4
Format profile                           : QuickTime
Codec ID                                 : qt
File size                                : 225 MiB
Duration                                 : 3mn 57s
Overall bit rate mode                    : Variable
Overall bit rate                         : 7 946 Kbps
Encoded date                             : UTC 2014-08-08 18:02:58
Tagged date                              : UTC 2014-08-08 18:03:48
Writing library                          : Apple QuickTime
com.apple.proapps.reel                   : CANON
com.apple.proapps.isGood                 : 0
com.apple.proapps.dataSize               : Unknown kind of value!
com.apple.proapps.displayFormat          : 1080i60
com.apple.proapps.shootingRate           : Unknown kind of value!
com.apple.proapps.videoBitrate           : 0
com.apple.proapps.originalFormat         : AVCHD 1080i60
com.apple.proapps.pulldown               : 1
com.apple.proapps.mediaRate              : Unknown kind of value!
com.apple.proapps.timecodeFormat         : 1
com.apple.proapps.numberOfAudioChannels : 2
com.apple.proapps.sampleRate             : 48000
com.apple.proapps.bitsPerSample          : 16
com.apple.quicktime.creationdate         : 2014-07-22T19:18:49-0500
com.apple.proapps.manufacturer           : Canon
com.apple.proapps.clipFileName           : Clip #1
com.apple.proapps.clipID                 : 000000000c68e80029fd297d7dbc45455b176f5a5b1441d8d93257481836befb68ebe0dbe13d88e46d63e6746 972dad41111104706aed608eea1886ad32653b1317dc61a12c5dcdebe674a1920bf58c690cf959c09350c6e
com.apple.proapps.RADSDKVersion          : 3.1
com.apple.proapps.cameraID               : 3D2CB7D4-9473-3E4C-9DE9-257FB8F6BB73
com.apple.proapps.cameraName             : CANON
com.apple.proapps.ingestDate.description : 2014-08-08 14:02:58 -0400
com.apple.quicktime.make                 : Apple
com.apple.quicktime.model                : MacBookPro11,3
com.apple.quicktime.software             : Mac OS X 10.9.4 (13E28)
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 2 frames
Format settings, GOP                     : M=3, N=15
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 3mn 57s
Bit rate mode                            : Variable
Bit rate                                 : 6 362 Kbps
Maximum bit rate                         : 12.0 Mbps
Width                                    : 1 440 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 29.970 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Interlaced
Scan type, store method                  : Interleaved fields
Scan order                               : Top Field First
Bits/(Pixel*Frame)                       : 0.136
Stream size                              : 180 MiB (80%)
Title                                    : Core Media Video
Encoded date                             : UTC 2014-08-08 18:02:58
Tagged date                              : UTC 2014-08-08 18:03:48
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Audio
ID                                       : 2
Format                                   : PCM
Format settings, Endianness              : Little
Format settings, Sign                    : Signed
Codec ID                                 : sowt
Duration                                 : 3mn 57s
Source duration                          : 3mn 57s
Bit rate mode                            : Constant
Bit rate                                 : 1 536 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Stream size                              : 43.5 MiB (19%)
Source stream size                       : 43.5 MiB (19%)
Title                                    : Core Media Audio
Encoded date                             : UTC 2014-08-08 18:02:58
Tagged date                              : UTC 2014-08-08 18:03:48
Other
ID                                       : 3
Type                                     : Time code
Format                                   : QuickTime TC
Duration                                 : 3mn 57s
Time code of first frame                 : 00:00:00;00
Time code, striped                       : Yes
Title                                    : Core Media Time Code
Encoded date                             : UTC 2014-08-08 18:02:58
Tagged date                              : UTC 2014-08-08 18:03:48

CTL(control file) need help to load column data in test file as row data

Dear Experts,
My data file having data like
COMPANY1 SUPP1 SUPPTYP1 SUPPDISTANCE1...SUPP100 SUPPTYP100 SUPPDISTANCE100
COMPANY2 SUPP1 SUPPTYP1 SUPPDISTANCE1...SUPP100 SUPPTYP100 SUPPDISTANCE100
i am trying to load in to oralc table desc as bellow and trying to load this into row data how can i do?
this ctl will load only for first suppliler only how can i load rest 99 supplier
LOAD DATA
INFILE '/data/Supplier.dat'
INSERT
INTO SUPPLIERDETAIL
COMP_CD position(1:8) char(8),
SUPPLR_ID position(9:15) char(7),
LOC_ID position(16:20) char(5),
SUPPLR_DIST position(21:24) char(4),
SUPPLR_TYP position(25:) char(1)
Many thanks
Kalinga

I take it that you are running the process on UNIX box based on '/data/Supplier.dat'.
Try to –
1. Break the records into multiple lines > Try using awk/ or perl
COMPANY1 SUPP1 SUPPTYP1 SUPPDISTANCE1...SUPP100 SUPPTYP100 SUPPDISTANCE100
COMPANY2 SUPP1 SUPPTYP1 SUPPDISTANCE1...SUPP100 SUPPTYP100 SUPPDISTANCE100
Should appear in your output file as –
COMPANY1 SUPP1 SUPPTYP1 SUPPDISTANCE1
COMPANY1 SUPP100UPPTYP100 SUPPDISTANCE100
COMPANY2 SUPP1 SUPPTYP1 SUPPDISTANCE1
COMPANY2 SUPP100UPPTYP100 SUPPDISTANCE100
2. Output from 1 -> Save it to a file
3. Pass the output (point 2) as the Input file for the CTL to read
Etbin’s Solution is fine but don’t forget you have for each row 100 occurrences of Supplier information – so that makes 100 INTO Table’s code to put into your CTL file.
Shailender Mehta

Can't expoert due to missing file.

I have completed my sound track in Soundtrack 1.2. While working on the project, I deleted a file that was no longer useful and is not a part of the project. Now, when I try to export the mix it tells me that I must reconnect the non-existent file first. Any suggestions?

Does it still show up in the bin? You may have to delete that file (references the original clip) as well.
jimi

Help! cant load Java due to missing file

Similar Messages

Maybe you are looking for