Help!! CD/Dvd will not burn

Can someone help? Satellite A135-S4527 will not burn either CD/DVD. I have installed RmvFltrs Toshiba DVD Rom but it did not help. I'm running vista 32 bit. I can be emailed at [email protected]
Thank you,
Marty

Try downloading and running the imgburn program. Google it. It is free and will burn CDs and DVDs.
This signature left intentionally blank.

Similar Messages

Blank 16x DVDs will not burn in internal DVD burner

Hi
Some blank 16x DVDs will not burn in the internal DVD burner on my iBook G4.
My iBook tries to load the DVD-Rs but it spits the DVD out after 2 tries.
Any reason why
iBook G4 Mac OS X (10.4.8)

It could be just the brand you are using.

DVD WILL NOT BURN IN IDVD

Trying to burn a project in IDVD, goes through the entire process up to "Writing Lead-In" and about 6 minutes left, the disk is ejected automatically. When put back in process gets hung up. Have also saved as a "Disk Image on my desktop and plays with no issues via the DVD software. When I select to burn to Disc, within 1 minute disk is ejected and this message comes up "The Disk can"t burn, because the device failed to calibrate the Laser Power for this Media". Is this a software or hardware issue? Or something else

Hi
• Trashing pref file - first thing to do (free and easy)
• Cheap media is often a problem - I use Verbatim DVD-R and burn at x4 speed
• Free space - is important BUT only on start-up hard disk (others doesn't matter)
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W

DVD will not burn but CD will

I have a PowerBook G4 and a G4 desktop. The DVD burner on the desktop is an upgrade. Recently both machines have stopped burning a DVD but will still burn a CD. Both machines run 10.3.9. Is it possible that software updates may have updated the machines and interfered with the ability to burn DVDs? I just have a hard time believing that both machines would break about the same time.

I kept reading and found one reply to someone elses problem that was a fix to mine.
In System Preferences I selected open finder. That was all.
I tried it because it was easy and I hade recenty reinstalled the system in the laptop. It was already selected on the desktop but I changed it and reselected open finder there also and they both now work. Hurray!!!

Burning only ones and next DVD will not burn

I never had a problem, now I can burn only first DVD (70min). The next DVD it's normally should take not more than 20 min. The setting speed is "Best". After inserting the DVD it runs hours and nothing happens. I have to force the iDVD to quit. I am using Verbatim DVD-R
Any help would be greatly appreciated.

The BEST way to make multiple copies is with a disk image. You create a disk image from iDVD (an option under FILE) and then use Apple's Disk Utility or Roxio's Toast Titanium to make as many discs as you want. Using the disk image approach, you can reduce the burn speed to 4x or lower (Disk Utility and Toast both offer this feature, iDVD 6 doesn't) which will make your burned discs more compatable with set top DVD players.
F Shippey

Multi-plexing Error-DVD will not burn

How do I get rid of errors? There are none that show up on the map view. This is a 6.0 theme, no music, one QT file with chapter markers. Thanks for any help you can give. I have tried about six times.

Made a few minor changes, but major change was to go from Best Performance to Professional Quality.
There's a bug with iDVD that causes problems when a movie is edited and then the probject is re-encoded and burned. The best route to take is create a new project, add the edited movie and go from there.
Also I suggest you follow this recommended workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums because they have a higher concentration of dye in the burn layer than other brands.
OT

DVD will not burn

I created a project using iDVD. When I try to burn it to a disc, it goes through all the processes, but when it gets to the last one (i.e. burning) it just continues to spin and never ends. I've been using the same brand name disks (Verbatim) for years with no problem. I've also been using iDVD for years with no problem. I tried deleting preferences and doing a permissions repair. That didn't make a difference. Please help.

Another possibility is that you may have exceeded the 15 minute motion menu duration in your menu drop zones and backgrounds. This can prevent a DVD from burning. You can check this in the Project Info screen (from the Project menu, choose Project Info). If the Motion Menus bar is red, then you will need to reduce the amount of media in your motion menus.

DVD will not burn in Studio Pro 2

I am somewhat confused. I have burned DVD's for several years without a problem, but now when trying to burn a dvd it does Muxing track, then when it goes into "Recording", it doesn't. It just tells me the Media had found a Power Calibration error. I have tried reloading the software, but it still does it.
Can anyone help?

That message is nothing to do with DVD SP.
Try a different burner or disc brand.

Installed New DVD burner, but it will not burn DVDs

I just installed a new Pioneer DVR-112D DVD burner but when I try to burn a DVD with iDVD 4 it will not burn a DVD. It looks like iDVD 4 will get to stage 4 of the process but it will not finish burning the DVD. Can anyone help me out?
Thank you
Nelson Rego

If you don't have Tiger, or iDVD 6 or higher, you will need PatchBurn
<http://www.patchburn.de>

Will Not Burn DVD: Error code 0x8002006D

Hello
I have a 12" PowerBook G4 fitted with a SuperDrive running Tiger 10.4.11. My machine will still play & burn CD's it will still play DVD's but it will not burn DVD's.
When trying to burn a DVD it comes up with following message:
Sorry, the operation could not be completed because an unexpected error occurred
(Error code 0x8002006D).
I am trying to burn using Verbatim DVD-R, which I have successfully used in the past.
Any ideas what the problem is, and are there any possible solutions?
Thanks for any help.
Message was edited by: bob1144

Silly rabbit wrote:
...it has always been fixed by running Onyx (maintenance). Some of the other users will condemn the use of Onyx, but I have never had any issues with it in four years of using it.
I've never had any issues with it either, I still think it's a good utility.
For burners, an external would be easiest to use as it plugs into a port on the machine. The lacie burners are ok, overall decent software & firmware support. I tore my apart to use the drive in a G4 tower, software all still works!
Get one that can use firewire & usb. the PPC will boot from a firewire external DVD & it could also be used later, if needed, on a machine that doesn't have FW.
Another option is macsales.com here in the States sells the exact same slot drive apple does for about $90. They do ship internationally, about $25 USD to London. If you want an internal solution this would be the way to go.
http://eshop.macsales.com/item/Other%20World%20Computing/MCTDVDSDB8DL/

TA44597 I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb. iTunes recognises when I have inserted a cd to play but will not burn to it.

I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb. iTunes recognises when I have inserted a cd to play but will not burn to it. help!

Portsian wrote:
I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb.
Is it also a CD/DVD burner? Or is it kjust a CD/DVD player?

Will not Burn HELP

Hey I am working on a very simple SD DVD project. Simple meaning one track, one menu with one button.
I import the DV stream file with the accompanying aiff audio track and target the one button to the track. I click burn and it just says "formatting finished" but it has not done anything. I can do the BUild/Format and it will make an MPEG folder in the destination on my hard drive with the .dv.aiff file and a PAR folder with a .m2v.par file inside.
I am at a loss as to why it will not burn to a disc. Can it not find my disc drive?
Using a MacBook Pro 2.4
Final Cut Studio 1.0
DVD Studio Pro 4.0.3
My G5 is getting repaired or I would test to see if it is a problem with FCS 1.0 on an intel chip.

Hi
My G5 is getting repaired or I would test to see if it is a problem with FCS 1.0 on an intel chip.
DVDSP 4.0.3 is not an universal binary application and will run under Rosetta in Intel machones, what can cause a lot of problems for sure !
Hope that helps !
Alberto

My DVD will play DVD's but will not burn from FCP

my DVD will play DVD's but will not burn from FCP also the Finder does not recognize when I load a black DVD

You need DVD burning/Authoring software.
EIther iDVD or Roxio Toast or try freeware burning software Burn for OS X.
iDVD is no longer available, but the last complete version that still works comes with Apple's iLife '09 apps.
You would need to search for this on online sites like Amazon to see if you can still purchase.
You install the iDVD app and all the authoring themes by doing a custom install of the disc and ONLY installing the iDVD app and iDVD themes.
Here are a few copies of this for sale on Amazon U.S. site.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=iLi fe+%2709
Roxio Toast is another option.
http://www.roxio.com/
And freeware burn software Burn for OS X.
http://burn-osx.sourceforge.net/Pages/English/home.html

My Adobe Premiere Elements 12 will not burn a DVD.

My Adobe Premiere Elements 12 ................. will not burn a DVD. I am using an ASUS model 11BB Desk top I recently purchased. The PC shuts down immeniately. I am using DVD-R mini and standard size disc. My subject Adobe works well on another computer.
Ken McAdams
Message was edited by: Geoff the kiwi
Serial number removed.
Note: never disclose your serial number.

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Idvd 08 shuts down after building, idvd will not burn a dvd

Dvd studio pro burns fine, Burning a DVD data disk works fine. Burning a project in Idvd 08 will not burn anything. It simply quits before finishing and spits out an empty dvd disk. I have a imac g5 power pc 2.1 ghz, 500gb hd, 2.5 gb ram and I am running idvd 08 version 7.0. I have tried reinstalling idvd and have even repaired permissions. What do I do? What could it be?

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• *Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb*
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
Yours Bengt W

Help!! CD/Dvd will not burn

Similar Messages

Maybe you are looking for