Help! Change of number

So my iPhone was stolen the other day and i've now got a replacement along with a new number which is all fine by me.
However, I had my phone linked to both my Macbook Pro and iPad, which means they're both still using my old number for imessage and the like.
My question is: How do i change the number associated with imessage?
Thanks

Hi, tamsinhill.
Thank you for using Apple Support Communities.
I would recommend changing the Apple ID password you use for iMessage as you no longer have access to the iPhone that is using the number you want to remove.
You also can unlink the old phone number as you are requesting. See the steps in section labeled How to unlink a phone number in the article below.
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Also, if you had Find My iPhone enabled on the stolen device, you may find these features useful.
iCloud: Erase your device remotely
http://support.apple.com/kb/PH2701
Hope that helps,
Jason H.

Similar Messages

Can't get the iPad to use my child's number for texting? All of my personal texts go on their iPad and there texts show up on my phone? How do I change the number?

Need help changing phone number on iPad to my child's number instead of mine.

You're welcome
Merry Christmas to you, too.

How do I change a number that was international back to UK number so it permanently recognises it as UK not international? I've tried delete, reset factory settings, change the format of the number etc and nothing seems to work. Help!

I recently moved back to the UK and bought my iphone 4 with me. It is unlocked and works on the new contract that I have set up here in the UK. The problem I'm having is that some of the UK numbers that I had already had on the iphone in Korea as international UK numbers will now not work as they are still coming up as international numbers. This means it is costing me a lot to message or call these numbers. I have tried changing the number format various ways, deleting the numbers (although it still seems to remember them), resetting the phone, restoring the phone.
How can I succesfully change these numbers?
Any UK numbers I have added since changing the contract are working fine.
Thanks!

Do you happen to have Dial Assist on? This is in Settings>Phone. This is what helps the phone identify international numbers when dialing, based on location. See if turning that off/on makes a difference. Unless you are making a number of international calls, I believe this can be left off. See the User Guide http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf Page 49 has info regarding Dial Assist.

Is it possible to change the number of rows while printing a contact sheet in Iphoto? Please help

Hi guys, I am struggling to find out how to change the number of rows on a contact sheet on Iphoto , i have selected my photos and i want it to print 6 photos on each page however I am not able to do it. Please help me out, im a Art student and i need to submit my contact sheets for an assignment Thanks in advance guys !!!!!

I don't think you can do that with the Contact Sheet layout. If you have Pages or a 3rd party image editor that supports layers you can do what you want. Or try the demo version of OmniGraffle for Mac It will run fully operational for 14 days.

I Need help. I Change My Number and now imessage don t work.

I Need help. I Change My Number and now imessage don t work.

Hi Ivonka88,
Here are some steps to try troubleshooting your issue with, depending on your specific symptoms:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers!
- Ari

Changing customer number in alv top of page for every new customer

hi experts,
in alv grid display top-of- page, how to change customer number customer name for every new customer.
please help me.
Regards
Naveen.

You may look into this blog
http://help-abap.blogspot.com/2008/09/salv-model-5-add-header-top-of-page.html
This is has been contributed by one of the SCN contributor Naimesh Patel.
a®

How can I change the number of pages in a spread?

I imported a document that our PR department used to create in Quark into InDesign 5.5. They have it set up in four-page spreads. However, the document has always been printed with a coil binding with a large graphic on each left-hand page and text on the right page. I would like to convert to using two-page spreads. However, none of the places the InDesign help leads me give any indication of changing the number of pages per spread.
My problem may be related to having imported from Quark, but if there's an easy way to change this, I'd appreciate hearing about it. Thanks!
-Brian

In the pages panel select the spreads then right-click and check Allow Selected Spreads to Shuffle and also Allow Documrnt pages to shuffle. If asked if you want to maintain the current page arrangement say no.

How do I change the number of picture columns in a folder

how do I change the number of picture columns in a folder

Never mind. I found the answer. For those who may wonder: you slide the cursor on the bottom right. I looked in IPhoto help but there was nothing there.

How do I change the number formatting within a Cell Table in Microsoft Word?

Hi, I was wondering if someone could help me out on an issue I've been having... I work for an accounting firm and we do a lot of financial statements.
I was wondering if we would be able to treat a cell table in Microsoft Word 2007 like I would a cell table in Microsoft Excel. Meaning, I would like to change the formatting of the numbers in the table to the "Accounting" (number) format so it
aligns by the decimal point and use the $ signs and () for negative numbers. We do use the link tables feature, however, most of our balancing pages just can't be done in Excel because of the way the text is written. It would be much harder to format
the text if it were to be typed in Excel. We have also tried creating an Excel sheet within Microsoft Word but it is the same as linking the tables... Again, a text formatting issue. The only option is to use tables within Word but how do we change
the number formatting to a "accounting" (number) format where the numbers would align with the decimal point and use () for the negative numbers. Is there ANY option for us to do this other than manually entering this information in using tabs?
If there are no options other than entering it in manually, please consider this as an option for your next software update. I believe that a LOT of people out there will be interested in this feature... My manager and I just attended a webinar on Microsoft
Advanced Word Tips Tricks and Techniques and 75% of the attending people had this question but no answer.
Thank you very much for your help!!!!!

Word does not really have number formatting for table cells. You can align cell contents on the decimal point, though, by setting a so-called decimal tab stop.
Option 1:
- Select the cells for which you want to do this.
- Display the ruler.
- Click the Tab box on the left hand side of the ruler until the box contains an inverted T with a dot.
- Click in the ruler where you want the decimal tab.
Option 2:
- Select the cells for which you want to do this.
- Click the arrow in the lower right corner of the Paragraph group on the Home tab of the ribbon.
- Click the Tabs... button in the lower left corner of the dialog.
- Specify a tab position in the box, e.g. 1.5".
- Select the 'Decimal' radio button under 'Alignment'.
- Click Set.
- Click OK.
You will have to type the numbers as they should appear, including the $ for currency and the ( ) for negative numbers.
Regards, Hans Vogelaar

Changing a number in an excel file that has been changed to a PDF

Changing a number in an excel file that has been changed to a PD ?

Hi llkwx,
I would like to confirm ,do you want to change the page number of the PDF or any other number in the data given in that PDF?
For changing the page number display
You can select Page Thumbnail option from the left hand side .In that panel ,right click and select the option "Number Pages" from the drop down menu.You can further change the page numbers as per your requirement.
Adding page numbers to PDF
Tools>Pages>Edit Page Design>Header and Footer>Add Header and Footer>click Insert Page Number
Do write us back with your response .We will be glad to help you out with your queries.
Regards
Sukrit Dhingra

PO Change Order Number!

Hi friends,
If i want to make some changes in existing purchase order before GR, i want to make it using a different change order number for the existing PO number so that i can review the history of changes being made.
Plz help out!
regards

Hi,
You can use version management functionality , which will give you record of changes with Reason as well as Text . This functionality will be applicable once you take print out of PO and after that you are doing any changes to PO.
Spro - Materials Management -Purchasing -Version Management - Set Up Version Management for External Purchasing Documents Activate Version management for your PO doc type and Pur Org
Define Reasons for Change
Set Up Change Displays
Regards,
Vikas

Changing page number sizes

I need to change the font size of the page numbers in my 300+ page document in the CS4 version of Indesign. The page numbers were created automatically, but without the use of a master text frame (it was started in the CS3 version, which I understand doesn't have that feature). Is there a way to automatically change the font size of all the page numbers at once? This would be preferable to going through and editing them manually.

SadieDanells wrote:
Even in the original master (titled A) I can't select the number marker. I can only select the 'A' that sits in place where the number would be on a regular page, and changing that doesn't affect the other numbers in the document even if I try to 'apply master to pages'.
Sadie, here's the way it works. If you start with one master page Called A-Master, make a text frame and place an automatic page number placeholder in it, it will look like the letter A on the master page, and will be replaced by the page number on the document page. You can't select or change the number on the document page unless you detach the text frame from the master page on the document page by clicking on it while holding shift and command. Once detached from the master, the text frame will act the same as if you had created it on the document page, so things like moving or changing the placeholder on the master page will no longer update on that document page.
If you make another master page called B-Master and base it on A-Master, the existing page number marker on the B-Master will also read as A since it is a copy of what was on the A-Master. If you made a second marker on the B-Master, it would have a B instead of an A. If you were to detach the copy of the text frame on the B-Master from the A-Master, it will change from an A to a B, and you will be able to edit it, but just like the link from the master page to the detached document page, the link from the A-Master to the B-Master will be broken, so updating the A-Master will no longer update on the B-Master.
So, to do what you want, you can either change the placeholder on the A-Master and it will change there, on any masters that were based on A, and on all document pages that were based on A or the masters based on A. If you don't want to do that, detach the text frame on the B-Master and it will update on all of the document pages based on B-Master, but all those based on A-Master will remain the same.
Does that help, or did I give you too much info?

How to change internal number range into external number range

Hi All,
There is a number range in the system which was assigned internally by mistake earlier. Now, I want to change the internally assigned number range to external number range.
Can anyone please let me know, the procedure to change used number range from internal number range to external number range and from external number range to internal number range.
Quick reply will be appreciated & points will be assigned.
Thanks & Regards,

hi Mehak,
you can try to simply change the range from ext to int (and vica versa). If that does not wrok, than you can delete the range and recreate it with proper settings. But you have to take into account that if you have a range as external from 1 to 10 and for example numbers 2 and 5 are taken already than you recreate the range 1..10 as internal, than you could have some problems. Probably best is in this case to recreate with other interval.
hope this helps
ec

FM to change material number of equipment

Hi
I need to change the Material number of an Equipment. I can do it on IQ03 Edit-> Special Ser.No Function->Change Material Number.
I need to do this from a program. Does anyone knows which/what FM does this task? Please...
Thank you.
Regards,
Vinod

Thanks for the tips. but i need this change to be reflected on the Action Log.
Please do let me know if there are other FM thanks. I presume there would be a series of FM that helps to this task.
Still stuck and lost.....need help....
Regards,
Vinod

Changing account number range of account group

existing number range of the following and want to change TO BE
Acct Group               Range
FIN                 180000 - 209999      TO BE 180000 199999
AP                  210000 - 319999      TO BE 200000 299999
EQ                 320000 - 399999       TO BE 300000 399999
what are the risks?

Hi,
Have you already created any GL accounts under the current number range?
If yes, then once you change the current number range to the new range you will not be able to edit any GL that you have already created and doesn't fall under the new number range.
Example: If you have already created an account with the number 208888. Now you change the number range from 180000-209999 to 180000-199999, then the account that you had created does not fall under the new number range hence you will not be able to change anything for this account 208888.
If you have created GL accounts under the old number range but it also falls under the new number range then there is no problem for Example: If you have already created an account with the number 190000, and now you change the number range from 180000-209999 to 180000-199999, the account number 190000 still falls under the new number range so you will still be able to make changes to it.
If you have not yet created any GLs like above then there is no problem at all You can easily change the number ranges without any worry
Hope this helps!
jw

Help! Change of number

Similar Messages

Maybe you are looking for