Help changing border colours. Indesign.

Hi, Thank you for taking the time to look at this post! I have a border made up of different shapes all colour blue but with different tones. I want to change these to say yellow but keep the tones as in some are light some are dark. Is it possible to do this one go or do I have to alter each one separately?
All the best,
Bradaz21

This is a screenshot of the swatches and the layout. Each shape has its own corresponding colour on the swatch, some colours I've repeated elsewhere.

Similar Messages

Changing border colour

How I can change the borders colour of a button to red on click event
thanks

Can be done with script on clik event of the button.
1. Go to "border properties" of button , and update the "Raised - 3D"(this may be default value) to "Solid" from the drop down.
2. If you need any default color for border before click you can select a color from the pallet elase select white color.
3. now assign the red color for the border on click event of the button, place the below script on click event of the button.
this.border.edge.color.value = "255, 0,0";
4. now you can see the red border for button on click event, if need more wider of the border can be increased the size from "border properties" of button.
Hope this will help.

How to change graphics colour in InDesign?

I've got a frame with a grey scale picture inside (preparing a brochure, two colours: Black and any other colour of my choice).
Rather than have the picutre in black (grey scale), I want to have it in shades of the other colour that I have available. Can I do this from within InDesign?
Every month we change the colour of the brochure, so ideally I just need to double click the respective colour in Swatches and all the text items, graphic etc in the colour will change.
Thanks for your help!

You can colorize non-transparent grayscale images or bitmap mode images either by selectiing them with the direct select tool and chhosing a swatch for the fil color, or by dragging the swatch and dropping it on the image.

How do I change Text Colour in a Spreadsheet? The Help menu doesn't help.

Simple question whcih i cannot find the simple answer to: How do I change Text Colour in a Spreadsheet? The Help menu doesn't help.

Hi Lecia,
You have several choices.
Use the first set of controls in the Format Bar. One of these is a Color well (red in the image). Select the cell(s) in which you want the text coloured, then click the well to open its Color palette, and choose your colour.
Use the Text Inspector. Open the inspector, click the Text button (T), and use the tools there (similar to the set in the Format Bar).
Press command-T to open the Fonts Window. This offers a few more options than are available in the Inspector or the Format bar.
Regarding "Help": I'd recommend using the Numbers '09 User Guide, which you can download via the Help menu. Easier to search, and easier reading than the individual Help articles. search 'text color' to quickly get to instructions on applying colour to text.
Regards,
Barry

Change the colour of the tile dynamically:

Hi,
I have 12 tiles in my application. Depending upon some condition, few tiles colour should be changed and also to the same tiles image should be added. (I'm creating tiles using Border)
Can anybody suggest how can I achieve this?
Thanks,
Santosh

Please close your previous threads before you start a new one.
Also, you have asked this very same question before here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/b3752b09-2ee2-46ac-a941-dc7baad78110/change-the-colour-of-the-rectangle-dynamically?forum=wpf#b3752b09-2ee2-46ac-a941-dc7baad78110.
Please don't ask the same question twice.
You could use DataTriggers and/or converters to change the property of some UI element based on some condition as already suggested in the previous thread.
Of course you must post your code, or even better upload a reproducable sample of your issue to OneDrive and post the link to it here, for anyone to be able to provide a specific solution.
But note that the forums are not for anyone else to do the entire work for you. You were given code samples of how to use data triggers and converters in the previous thread. That should certainly give you the idea.
Please remember to close your threads by marking helpful posts as answer and please start a new thread if you have a new question.

Changing line colour of Webhelp

hello again helpful peeps,
Just trying to change the colour of some lines in the webhelp. I have succesfully changed one of the lines (see diagram below) using the brilliant "Skinny on Skins" help, but now also need to change the one above it. Is it possible?
Thanks!

you need to edit the output of webhelp,
Go to the webhelp output folder and open the file whskin_mbars.htm in notepad.
search for <body tag and add the following style
style="border-top: 1px solid red;"
in case you want to make the border top as red color or make it any color you want.
thanks
Praful

Change the colour of the outer line of a circle

Hello everyone,
I drew up a circle with no fill inside, to show where the location of my highway storm culvert will be.
I changed the thickness of the outer line of my circle shape by creating a stroke effect at layer → blending options → stroke; then I changed the thickness of the line by right clicking in stroke at the layers panel and then choosing "scale effect."
But the problem I have is that the outer line is gray, and I want it to be black.
The outer line was originally red though so I changed my image → mode to grayscale, because I couldn't find a way to change the colour while keeping my image in RGB colour. So I've managed to make the outer line gray by changing the image mode but I still can't change the colour of the outer line to black.
I'm sure there must be other ways of changing the outer line colour without having to change the image mode, but I'm clueless.
Here is my drawing:
The text next to the circle says «Obra de desagüe». That's spanish for "drainage construction site."
You see, I can't change the colour because I have no clue at where the "change colour option" is. I tried going to layer → layer properties, but in there there's only 7 colours to choose from. I chose a random colour, just to see what happens and what truly changed colour was the layer, within the layers panel; not the shape contained within the layer.
So I'm lost here, any help please?
Unfortunately I'm still not an expert in Photoshop just yet.
Thank you for reading my post.

Set shape layer opacity 100% Fill 0% to make fill transparent or add an empty layer make a circular selection stroke it black.

How to make this image compatible as a laser cut file by changing stroke colour?

My final aim with this image is to make it compatible as a laser cut raster engrave design, so the laser cutter will fill the black areas or white (either would be fine). If this is not possible then even as a laser cut outline would be suitable
This is how the image will look when in Illustrator. however when I use the preview screen (ctrl+y) it creates an outline. This is how the laser cutter will read the image which is why it is very important the preview image is is what i would expect the final outcome to be.
As a raster the laser cutter requires the stroke line to be blue r:0 g:0 B:255. Currently I cannot edit the colour, yet I can change the stroke weight. Also how I would I fill the engraved areas as a stroke? At the moment when I try converting the stroke to blue it turns grey.
I am also unsure as to how I would make this feasible even to be cut out when I cannot change the stroke colour to red. This is required for laser cut designs as the laser cutter reads red lines to be cut.
I can usually change stroke colours easily so I assume this is due to the fact that I have brought this file through from Photoshop so it is not yet fullu editable. I have used the live trace and live paint function in illustrator so far.
Any help would be appreciated

You need to expand the artwork and convert the strokes to genuine outlines to in turn be able to apply anotehr thin stroke to them again...
Mylenium

How do I stop B/W photos changing to colour?

I am running LR 2.7 on a Mac and this weekend for the first time, I set my camera to black & white mode and took a series of raw photos. When I imported them they all came across in the filmstrip as black & white but as soon as I started viewing them they changed to colour. I know the raw file contains all the colour data etc. but I really wanted to work on the black & white image from the camera and not have to start from a colour image? What did I do wrong? How can I stop it changing in future when I shoot raw files?

Lightroom knows little to nothing about your in-camera process settings. So, setting the camera to B&W and expecting the images to be correctly rendered is futile. The following post from the FAQ forum should help explain the reasons http://forums.adobe.com/thread/358016?tstart=0
If you really want your images to appear as B&W in Lightroom you can apply one of the B&W develop presets during import.

Newby question. Trying to fill a section but using fill and/or stroke only changes line colour

Hi,
Been trying to work this out for hours now so if anyone can help I will be forever thankful!
Basically, I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the colour of the line.
I'm not sure if that makes sense or if anyone can help based on that but I can post pictures or something if that would help?
I also understand that the magic want thing might be where I've went wrong at the very start maybe?
Thanks for any help at all!

I don't know if that helps you understand at all?
For example I want to fill the inside of the square but when I'm hitting the fill and stroke buttons they're just changing the colour of the line.
I think I might just start from scratch again! Don't know where I've went wrong.

Change the Colour of the title safe zones

Is there a way to change the yellow tittle safe zone colour, to something that can be seen over all colours. yellow cant be seen over white and it makes it very difficult to use, FCP 7 used aqua Blue it worked much better. PLease help, Or Apple PLEASE CHANGE the Colour or make it able to change for the user prefs.....

Try this:
http://www.youtube.com/watch?v=aZFs85ZBSFA ["Zones"]
(some of this was "over the top" but the default basics are very useful.)
and if you need "center cut" safe zones:
http://www.youtube.com/watch?v=--SFBOu42d0

Change the colour of any transaction

Hi SAP Gurus,
    Can anybody help me......
    I need to change the colour of any transaction from default blue to black and white.
    I need this at transaction level, I can do this at user level (Customized local layout).
Thanks & Regards,
Krishna...

Hi,
I do not think so that it's possible. The SAP Gui is responsible for displaying data received from application server. Hence I think is completely based on the SAP Gui settings and you can't define layout per transaction in SAP Gui. Maybe it is possible to set up different layout for transaction in portal.
Cheers

Change the colour of the rectangle dynamically:

Hi,
I've some tiles in wpf application. (non clickable, drawn using Rectangle). I want to change the colour of the tile depending upon condition Ok, Warning, Error to the colour Blue, Yellow, Red respectively.
Can you please let me know how can I achieve this?
Thanks,
Santosh

Thanks for the response.
I'm using Datatemplate like below:
<DataTemplate x:Key="Template1" DataType="{x:Type BusinessObjects:BindableCapability}">
<Border x:Name="CapabilityBorder"
Background="{StaticResource GlobalHeaderBackgroundBrush}"
BorderBrush="{StaticResource TileBorderBrush}"
BorderThickness="1"
Margin="8"
Height="200"
Width="420">
<Grid>
<TextBlock x:Name="CapabilityTextBlock"
Text="{Binding CapabilityIdentifierDescription}"
Style="{StaticResource TileTitleTextStyle}"/>
</Grid>
</Border>
<DataTemplate.Triggers>
<DataTrigger Binding="{Binding IsAvailable}" Value="False">
<Setter TargetName="CapabilityBorder" Property="Background" Value="{StaticResource TileErrorBrush}"/>
<Setter TargetName="CapabilityTextBlock" Property="Foreground" Value="{StaticResource TileErrorForegroundBrush}"/>
</DataTrigger>
</DataTemplate.Triggers>
</DataTemplate>
<DataTemplate x:Key="Template2" DataType="{x:Type BusinessObjects:BindableCapability}">
<Border x:Name="CapabilityBorder"
Background="{StaticResource GlobalHeaderBackgroundBrush}"
BorderBrush="{StaticResource TileBorderBrush}"
BorderThickness="1"
Margin="8"
Height="200"
Width="202">
<Grid>
<TextBlock x:Name="CapabilityTextBlock"
Text="{Binding CapabilityIdentifierDescription}"
Style="{StaticResource TileTitleTextStyle}"/>
</Grid>
</Border>
<DataTemplate.Triggers>
<DataTrigger Binding="{Binding IsAvailable}" Value="False">
<Setter TargetName="CapabilityBorder" Property="Background" Value="{StaticResource TileErrorBrush}"/>
<Setter TargetName="CapabilityTextBlock" Property="Foreground" Value="{StaticResource TileErrorForegroundBrush}"/>
</DataTrigger>
</DataTemplate.Triggers>
</DataTemplate>
Like Temlate1 and Templdate2, I should have one more template which fills the color dynamically for the above templates. I've 12 tiles (rectangles), I need to give some blue, some yellow and some red depending upon some condition.
Please suggest how I can achieve this?
Thanks,
Santosh

Is it possible to change the colour of box in script from black to blue

Hi,
Is it possible to change the colour of box in script from black to blue or some other colour and background colour also...if so how....
Thanks.

No..
It is not possible in scripts..
In scripts u cannot use colors..
In smartforms u can do that..
reward if it helps u..
sai ramesh

Change the colour of lines in the same string indicator.

Hi everybody,
I'm getting crazy, because I'm looking for the way to change the colour of
the lines I want in the same string indicator.
I'm doing an application to control an instrument by serial port, and I'm
concatenating the lines that this instrument gives me, but there is some
line that I would want to change its colour, because there has been an alarm,
for instance. And I only can change all the string.
Is there any way to do this? I don't know.
Could you please help me?

Thank You Very Much.
The fourth step is a little bit difficult to understand, but what I've done
is all the three first steps, and in the fourth one I've made an array (I32)
of the lines that I don't want to highlight and connect it to Disabled �tems.
Do you think this is a good solution?
Thank you again for your help. I really needed someone to help me, because
if not I would still be with the STRING INDICATOR.
Timothy John Streeter wrote:
>Hi Carlos>>I'm sorry for being too brief with the last email.>>1) Place
an 'Multiple Selection Listbox' on your front panel.>>2) Create an attribute
node. Make the attribute 'Item Names'.>>3) Put every completed line into
the last element of an array, and then pass the array
>to the attibute node. (This build the list>of strings in the Listbox).>>4)
To highlight a line, make an array containing the line numbers (I32) that
you want
>highlighted and pass it the terminal of the>Listbox.>>Hope this is more
helpful>>Tim>>Carlos Jorge wrote>> Thank you for your help, but I don't
understand what you have told me. What>> I have to pass to the indicator
node, and what is this indicator node? My>> problem now is the last thing
I have to do.>>>> Could you please explain my doubt with more detail?>>>>
Thank you a lot.>> Timothy John Streeter wrote>
>Hi Carlos>>Try using a 'Multiple Selection List Box' indicator instead of>>
a string indicator. You>> >can highlight a line by adding the line>number
to an array and pass it to>> the indicator node.>>Tim>>Carlos Jorge Granadino
wrote>> Hi everybody,>>>>>> I'm getting crazy, because I'm looking for
the way to change the colour of>>>> the lines I want in the same string indicator.>>
I'm doing an application>> to control an instrument by serial port, and I'm>>
concatenating the lines>> that this instrument gives me, but there is some>>
line that I would want>> to change its colour, because there has been an
alarm,>> for instance. And>> I only can change all the string.>> Is there
any way to do this? I don't>> know.>>>> Could you please help me?>>

Help changing border colours. Indesign.

Similar Messages

Maybe you are looking for