Help! Charger won't work!

Whenever I charge my iPod I plug in the white charger (the one that comes with the iPod) into the wall.
Problem is, I plug it in and out multiple times but the little thunderbolt that appears on the battery icon won't appear when I plug my charger in
I've tried other USBwall plugs but the same problem happens
Rare times the little thunderbolt will appear on the battery icon and it will charge
One time I left the charger in overnight and when I looked at it, the battery was full (the charging sign didn't appear)

There is a bug that causes the iPod Touch to indicate that the battery is full even when it isn't. However, if you leave it plugged in, then after a few minutes the indicator will change.
The symptom I've seen is that when I plug in the charger, the "slide to unlock" screen appears with the part discharged battery in the middle of the screen while the small battery icon in the top right of the screen indicates a full battery. It sorts itself out after a few minutes.
Since you say that when you left it overnight you then found that the battery was full, it suggests that this is simply the indicator bug that I've mentioned. To test this, plug in the charger and if it appears that it is not charging, simply leave it alone and check it again after five or ten minutes. Does it say it's charging now?

Similar Messages

My iPod touch 4th generation charger won't work!

I have a black 4th gen. iPod touch with 5.1 iOS. The charger won't work anymore and I think something is cut in the wire. If I get a new one do I have to pay, if so were can I get one?

I think you mean the cable. Yes, that is covered by the warranty that comes with the iPod. I would make an appointment at the Genius Bar of an Apple store. If defective and not abused and within warranty, Apple will replace the cable.

MY CHARGER WON'T WORK...HELP!?

Hello!
So my really old charger after about 4 years just broke on me about a month ago, so I bought a new one online for a MacBook Pro. Now all of a sudden this new charger doesn't work either. I've only had this one for the past month, not even. I picked up the power source box? (or whatever you want to call it) and when I did it sounded like there is a ball in it moving. Does that mean it's completely broken? I don't want to have to buy ANOTHER new one. It isn't working when it's plugged into multiple outlets, when I connect the plug into my computer no green light comes on/red light saying its charging. Please help I don't want to have to buy a new one!
Thank you!

And, what would you expect us to do? We can't make your charger work. Think about what you might do if your car wouldn't start. You'd take it to the mechanic to fix it. Well, the mechanic for anything made by Apple is your local Apple Store.

My Lightning Charger Won't Work

my lightning charger for my iPod Touch 5th gen won't work, but when i plug it into another charger it does. i don't have any extra chargers at home, and need to figure out what's wrong with it. any help?

Sounds like it simply malfunctioning.
Try swapping the charger (plug) vs the cable, using the one that you know is working. From there you can isolate which is at fault.

Gooseneck Adapter for dock charger won't work

I bought the Apple Shuffle car charger that plugs into the cigarette lighter socket and Shuffle works great. But since I have a standard, when I shift, the Shuffle is too close to the gear shift. So I bought the gooseneck adapter and Shuffle won't work. Took gooseneck back to store, thinking it was defective, but 2nd one doesn't work either. Any suggestions??
Windows XP

Hi
You have a couple of options as I see it please click on the web link given below might resolve your issue.
Testing and Using the AC Power Adapter
If this does not work please contact HP technical support and get the New Ac Adapter that will fix your issue.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards,
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Please help - iMessage won't work

So I updated my phone today like I'm sure a lot of you did and I tried going in to activate my iMessage, I've tried it for hours and even reset my phone and it won't work. I know my id and password are right and my connection to my wifi is good but every time I do it it pops up after about 30 seconds of trying and says "could not sign in. Please check your network connection and try again"
Someone please help ... What do I do? My date & time thing is already set to on as I previously read.

If you are having trouble with SMS messages, then you would need to address that with your carrier, unless you are receiving them and just not get a notification. If you have followed the steps I gave you for iMessage and you are not receiving notifications, then check the settings for Notification Center. If you have Messages set to show on the lock screen and play a sound, and display a banner, etc. then your next step is a restore. First restore from a backup, and if that doesn't work, then restore as a new device. Restoring the phone will result in the loss of all data. Make sure you have backed up the phone, synced all content and imported photos to the computer.

Flash help, still won't work

I am trying to put a flash video on my website. I tried to
follow all the directions from start to finish, but somewhere along
the way I went wrong. I have a video I made in Final Cut Pro,
exported in QT format. I used the Adobe Flash Encoder to convert
the .mov to a .flv file. Then I imported the .flv file into Flash
CS3 Pro and put a skin to it and saved the .fla and exported as
.swf. Then I went into Dreamweaver CS3 and used the "insert media"
function to insert the .swf file. I got it positioned correctly and
go to view it in the broswer - looks great, autoplay works, skin
appears, etc. So then I upload / "put" to the server and click
"yes" to include dependent elements. But then when I navigate to
the site from the brower, the video doesn't work. In fact, it
doesnt show up at all. All you see is a blank spot where the video
should be. Its probably obvious by now that Im not too terribly
knowledgeable about DW or web design or HTML, but I feel like I got
pretty close and Im frustrated that it won't work. Since it works
perfectly in the "preview in browser" function in DW, I feel that I
am getting close. But my guess is that the error is somewhere in
the upload to server process since it works locally but not
remotely. Any help would be much appreciated as Im getting
frustrated. Below is the URL. The problem could be anywhere in the
process. I tried creating the .fla file with both a local reference
to the .flv file (and then uploading all to server) as well as
creating with a reference to the .flv file after already uploading
to server. Still no cigar. I can look at the remote view and see
that the .html file, the .swf file, the .fla file, the .flv file,
and the script file are all uploaded. Maybe the referencing is
incorrect...just not sure. Thanks !
http://www.spottedtailproductions.com/upstream_flash.html

>
http://www.spottedtailproductions.com/upstream_flash.html
Bad link.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"STPfilms" <[email protected]> wrote in
message
news:[email protected]...
>I am trying to put a flash video on my website. I tried
to follow all the
> directions from start to finish, but somewhere along the
way I went wrong.
> I
> have a video I made in Final Cut Pro, exported in QT
format. I used the
> Adobe
> Flash Encoder to convert the .mov to a .flv file. Then I
imported the .flv
> file
> into Flash CS3 Pro and put a skin to it and saved the
.fla and exported as
> .swf. Then I went into Dreamweaver CS3 and used the
"insert media"
> function to
> insert the .swf file. I got it positioned correctly and
go to view it in
> the
> broswer - looks great, autoplay works, skin appears,
etc. So then I upload
> /
> "put" to the server and click "yes" to include dependent
elements. But
> then
> when I navigate to the site from the brower, the video
doesn't work. In
> fact,
> it doesnt show up at all. All you see is a blank spot
where the video
> should
> be. Its probably obvious by now that Im not too terribly
knowledgeable
> about DW
> or web design or HTML, but I feel like I got pretty
close and Im
> frustrated
> that it won't work. Since it works perfectly in the
"preview in browser"
> function in DW, I feel that I am getting close. But my
guess is that the
> error
> is somewhere in the upload to server process since it
works locally but
> not
> remotely. Any help would be much appreciated as Im
getting frustrated.
> Below is
> the URL. The problem could be anywhere in the process. I
tried creating
> the
> .fla file with both a local reference to the .flv file
(and then uploading
> all
> to server) as well as creating with a reference to the
.flv file after
> already
> uploading to server. Still no cigar. I can look at the
remote view and see
> that
> the .html file, the .swf file, the .fla file, the .flv
file, and the
> script
> file are all uploaded. Maybe the referencing is
incorrect...just not sure.
> Thanks !
>
>
http://www.spottedtailproductions.com/upstream_flash.html
>

IPod charger won't work

It was fine when I went to bed and this morning it wouldent work it still looks the same but it won't work at all..

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My charger won't work???

My macbookpro charger sometmes stopes working theres no light on or nothing can you help please thanks....

Did you notice that this is the iPhone forum, not Macbook forum?

Help Ipod won't work with my computer anymore!

I have a 5th gen Ipod and it has been working fine for the first month I've had it but recently I can't seem to get it to work with Itunes or even be detected on my computer. I've already tried all the things it says to do on the support page and none of it seems to be working. I've reinstalled everything and tried the Ipod updater but it won't work. Has anyone else had this problem and if so what should I do? Is there any way I can just get a new Ipod since I've only had this one for a month?

Try putting your iPod into disk mode...
Putting iPod into Disk Mode
Now try to restore it...
Restore the iPod
btabz

New iPod touch 5th generation charger won't work with computers or USB power adapter?

I just got this charger less than two weeks ago and just yesterday it started saying "This cable or accessory is not certified and may not work on this iPod." It will only work on some occasions, but most of the time it won't. Other times it will show that it is charging, but when I select to "Trust" my computer it stops charging. When I plug it into the USB power adapter, it rarely works (even when I try it in different outlets.) Any way to solve this issue?

If a non-Apple cable and the place will not take it back then:
USB Power Adapter Takeback Program

Please Help--It Won't Work At All!!!

Today when I was using my iPod, the battery went completely down, to the point where I had to charge it. I plugged it into the computer, and iTunes didn't come up. So I took the USB cable out and plugged it back in. Still didn't work, so I manually brought iTunes up. My iPod is all black, and nothing works. On iTunes, it doesn't give me the option to sync my iPod. The battery is totally drained, so I can't toggle it or reset. Can someone please help me??!!??!!
Kellie

Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

MacBook Pro charger won't work

My new macbook pro's charger stopped working. I tried switching outlets to see if it would work but it didn't. Also I noticed something strange, when I plug in the MacBook into different outlets the LED on the charger turns on for one second then doesn't work (Does anyone know why this happen and if there's a fix?). Also is there a way I can check if the problem is within the MacBook or the charger. I can't really go to an apple store so please don't say call apple or go to the store, and I dont have any other computers to check if the charger works on, thanks in advance. I hope there's a way to fix this problem. I tried cleaning the MagSafe place and tried SMC reset, anything else I can do?

If this is a new MacBook Pro, do you mean new to you since Apple no longer sells the MBP with Mac OS X 10.7.3 That would be at least a three year old machine.
If the Apple store is not an option, you will have to call Apple for help, try the AppleCare support number from http://support.apple.com/kb/HE57 or start a service request by going to the ExpressLane at https://expresslane.apple.com

BT Desktop Help still won't work with Windows 7 64...

THis has been going on for a while now. It just won't launch. Emails and screen sharing sessions have produced nothing. One phone call to a representative resuilted in them telling me that the 64 bit Windows 7 version was not available yet - but wait a week or so. I've tried the latests versions and still doesn't work althougth it works fine on Vista. Anyone else still having problems?
Waiting for a call now from level 2 support but i'm not hopeful.

Its only a diagnostic tool and has nothing to do with getting the best speed.
It can diagnose simple problems and fix them if possible, reducing the number of calls to the helpdesk
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Macbook Pro and Monitor help - Now won't work??

Ok so I have been using my i7 Macbook Pro 15" with a Dell Monitor fine.. but then started to get the odd flickers.. I was told this was a Mac issue and many many people had this..
Now when I plug in, my Monitor defaults to the orange standby light and it won't come on at all when connected to the Mac??!
I am using DVI with an Apple Thunderbolt adaptor so i can use the Thunderbolt connection on this newer MBP.
I took the monitor off the Mac and connected via DVI to a PC Laptop and the Monitor sprang into life and works great!!!
So I know its not the Monitor
Any solution to making this work again on the Mac????

Hi,
Could you please confirm the CC application you are using.
It would be great if you post a screenshot of the problem.
Regards,
Sumit Singh

Help! Charger won't work!

Similar Messages

Maybe you are looking for