Help: Chart with multiple data points

I would like to create a chart which has 2 data points. The way I know it works, each metric has only one data point. If I want the metric history chart shows 2 data points (y axis) over the same period of time (x axis). Is it possible to do such metric?
Thanks for the help.

Don't believe you can have 2 data points as you are suggesting. Oracle is working on enhancing the reporting framework for EM, but not sure when BI will be there. You can send data from the OMR to an existing BI infrastructure and report from there.
Sorry...
Have a good day.

Similar Messages

Charts with Multiple Data Series in One Color

I am trying to create a pie chart to reflect the different areas of my budget in four categories. However, my budget is divided into several smaller categories across several columns and I can only get the cells in the first column to register even though the additional cells show up in the Inspector as part of the series.

Jerry,
Thanks for the info. I'll give that a read when I get home today. In a roundabout way I tried part of that. I created my chart with my data for Mammallia and the time periods. Then I selected the occurrences for Synapsids and dropped them in, but it added them to the first data set in the chart? I'm guessing I was doing something wrong, but I'm unsure of what. Numbers/Excel has never been a strong subject for me, but I'll try your advice and see what I come up with.
Reading your post again, the last way seems the most simple and I feel a little foolish for not thinking of that myself. Oh well, that's how we learn right? Thanks for your help!! You saved me a lot of hassle.
Best regards,
Mitch

Color Highlights not working in bar chart with two data points

Iu2019m using Crystal Reports 2011. I have created a bar graph using two data fields in the Chart Expert. I have set the colors for the bars in the Color Highlights tab, but the colors that I have defined have not been applied to the graph.
I have tried changing the colors numerous times and have done it in both design and preview modes. It seems to be somethign with having two data points because I don't have this problem when using just one data point. Please help!

is the colour mode Color by group or color by series

X-y Scatter chart with multiple data series

Hi,
How do I create an x-y scatter chart with more than 1 data series? For example:
Series 1
x__y
1__0
2__5
3__9
4__7
5__2
Series 2
x_____y
0.5___0
1.3___4.8
2.6___12.3
4.1___8.4
4.9___3.2
I can do this with 2 seperate graphs but I need them on the same graph.
Is there a limit on the number of series that can be placed on a single x-y scatter graph?
Many thanks.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Need charting help - multiple data points between major ticks

Hi,
I am trying to create an AreaChart in which the data shows a
consumption rate over the course of a week. The major points along
the x-axis will be Monday, Tuesday, ... , Sunday (the days of the
week). However, there are multiple data points between each day. I
only want the days of the week to show on the axis but I want to
plot all of the data points. How would I go about accomplishing
this task?
Thanks in advance,
Brent Schooley

Thanks, it is getting closer now. My only problem now is that
the data points do not line up correctly with the tick marks. I've
look through the documentation and I can't figure out what to do to
ensure this happens. Here are the relevant portions of my code:
[Bindable]
public var energyDataAC:ArrayCollection = new
ArrayCollection( [
{date: "2007, 7, 27, 0", saved: 0},
{date: "2007, 7, 27, 12", saved: 50},
{date: "2007, 7, 28, 0", saved: 35},
{date: "2007, 7, 28, 12", saved: 0},
{date: "2007, 7, 29, 0", saved: 0},
{date: "2007, 7, 29, 12", saved: 46},
{date: "2007, 7, 30, 0", saved: 39},
{date: "2007, 7, 30, 12", saved: 0},
{date: "2007, 7, 31, 0", saved: 0},
{date: "2007, 7, 31, 12", saved: 44},
{date: "2007, 8, 1, 0", saved: 45},
{date: "2007, 8, 1, 12", saved: 0} ]);
public function myParseFunction(s:String):Date {
// Get an array of Strings from the comma-separated String
passed in.
var a:Array = s.split(",");
// Create the new Date object.
var newDate:Date = new Date(a[0],a[1],a[2],a[3]);
return newDate;
<mx:AreaChart id="Areachart" height="100%" width="100%"
paddingLeft="5" paddingRight="5"
showDataTips="true" dataProvider="{energyDataAC}" >
<mx:horizontalAxisRenderer>
<mx:AxisRenderer styleName="myAxisStyle"/>
</mx:horizontalAxisRenderer>
<mx:horizontalAxis>
<mx:DateTimeAxis alignLabelsToUnits="true"
dataUnits="hours" labelUnits="days" dataInterval="12" interval="1"
parseFunction="myParseFunction"/>
</mx:horizontalAxis>
<mx:series>
<mx:AreaSeries yField="saved" xField="date"
form="segment" displayName="Energy Saved"/>
</mx:series>
</mx:AreaChart>
<mx:Legend dataProvider="{Areachart}"/>
Any ideas?
Thanks,
Brent

"Scatter" Chart with Multiple Values per Date

APEX Gurus,
I need to plot a chart with multiple y-axis values along the x-axis.
Here's an example:
X-Axis (Date) Y-Axis (Number)
1-JAN-07 1
1-JAN-07 2
1-JAN-07 3
2-JAN-07 1
2-JAN-07 2
3-JAN-07 1
Right now, APEX displays the X-axis (Date) as separate values on the x-axis. But I want all three 1-JAN-07 values to line up vertically under x-axis. I am currently using a line chart for this. And it displays a "dot" for each value (depending on my max rows value).
Any insight would be much appreciated! And thanks in advance!
Susan

You can try using this charting tool for generating scatter charts:
http://htmldb.oracle.com/pls/otn/f?p=31517:58
Denes Kubicek

Report Builder with multiple data series

I am not able to figure out how to create a bar chart using
multiple data series in the Report Builder. I can do it with
explicit CFML coding but not in the Report Builder. I am running MX
version 7 with the current (as of 9/1/07) download of the Report
Builder.
My table contains visit information by site, with standard
demographics on each visit (age, race, gender, etc.) I am trying to
analyze the data by site, for example, race by site.
I am using an SQL statement to sort and group by site &
race. I can get a chart of the number of visits for each site or
the total number of visits by race across all sites. But I can't
get race by site. The SQL statement looks like this:
SELECT race, site, COUNT(*) as counter
FROM visit_info WHERE userid = #session.uid#
GROUP BY site, race ORDER by site, race
Every variation I have tried for showing race by site either
leaves out part of the results or creates a bar chart that has the
race and site categories as separate entities (White, Black,
Chinese, Site1, Site2, Site3, etc). I've also tried creating a
combined variable (site_race) but that doesn't seem to fare any
better.
Any help would be appreciated.

Pop,
Badunit's example is one possible arrangement that you might have described; that is, one column for X values and several columns for Y values. This is the case when you should respond that you are sharing X-values. With all the data in one table, you can select it all at once, so you don't have the problem with dragging additional series into the chart.
The Numbers User Guide PDF's first chapter is the place to start getting your bearings - you will learn how to distinguish Header vs. Body rows and columns. It's worth the effort to take another look at it.
Since you are using a Scatter Chart, it's important not to use a header column for X because X values must be Numeric, as opposed to Text.
Jerry

Line Chart with Multiple Series

Post Author: JayZee
CA Forum: Charts and Graphs
HI
I am trying to create a line chart with multiple series for trend analysis on CR XI but not having much luck, I thought it would be so simple to do!
My data is provided summarized on the server and is returned as 12 rows:
Month Year1 Year2 Year3 Year4 Year5January 100 80 75 90 120February 85 25 40 25 80etc for the rest of the months
My problem is that I can only get the chart to accept the values to display as a summary and not just as the data pulled back from the server. I have read an article on the support site for Crystal 6.0 but it doesn't seem to translate well into XI.
If necessary I could redesign the table to bring back un-summarized data but that is quite a big job.
Any help greatly appreciated.
Jay

Post Author: Tim Wise
CA Forum: Charts and Graphs
In the chart expert, put Month in the 'On change of' box and put each year in the 'Show values' box. This puts the month on the x-axis and plots each year as a line.
Is that what you want?
I did this in CR 2008 using your data in an Excel sheet.

Crystal Reports - Charts - Restricting the data points on the X-axis

Hi,
Is there a way to restrict the number of points to display on the x-axis of a crystal chart keeping the number of data points the same.
For example, if the chart plots date vs value points and the data for the chart is from 1980 to 2009. This means the data points on the x-axis appear very close to each other.
I need a way to show the chart with all data from 1980 to 2009 but limited x-axis labels. Is there a way to configure the number of labels to show on the x-axis.
Thanks!

Thanks for the answer.
"Right click on one of the x axis labels and select Group (X) Axis Options...
On the Layout tab there is an option to Skip Group Labels, check this and enter in the number of labels you want to skip". Is there a way to do this from a .NET client or via a formula field in Crystal itself. The data points is going to be dynamic, hence the requirement is to dynamically configure the "number of labels" to be skipped.
Thanks.

Convert a scatter graph with multiple data series into individual graphs

I am trying to convert a scatter graph with multiple data series into individual graphs, with the series having the same formatting as in the graph when all series are together.
Normally, if I delete any series, the color scheme for all the other series vanishes. I can then waste more time in having to re-adjust the color and shape of the series, but this is tedious. This, I do not want. Is there an automated way to do this?
Ideally, of course, all series would appear in little subsections in the space of the former one graph, all with individual axes, but I can't have all, so I'll settle with having several individual new graphs, each with just one series, and with the original
formatting.
Thx.

How about creating a copy of the chart, and then setting all series except one to be transparent (no line, no marker)? Repeat for each series.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Web Analysis : populate the same table with multiple data sources

Hi folks,
I would like to know if it is possible to populate a table with multiple data sources.
For instance, I'd like to create a table with 3 columns : Entity, Customer and AvgCostPerCust.
Entity and Customer come from one Essbase, AvgCostPerCust comes from HFM.
The objective is to get a calculated member which is Customer * AvgCostPerCust.
Any ideas ?
Once again, thanks for your help.

I would like to have the following output:
File 1 - Store 2 - Query A + Store 2 - Query B
File 2 - Store 4 - Query A + Store 4 - Query B
File 3 - Store 5 - Query A + Store 5 - Query B
the bursting level should be give at
File 1 - Store 2 - Query A + Store 2 - Query B
so the tag in the xml has to be split by common to these three rows.
since the data is coming from the diff query, and the data is not going to be under single tag.
you cannot burst it using concatenated data source.
But you can do it, using the datatemplate, and link the query and get the data for each file under a single query,
select distinct store_name from all-stores
select * from query1 where store name = :store_name === 1st query
select * from query2 where store name = :store_name === 2nd query
define the datastructure the way you wanted,
the xml will contain something like this
<stores>
<store> </store> - for store 2
<store> </store> - for store 3
<store> </store> - for store 4
<store> </store> - for store 5
<stores>
now you can burst it at store level.

BI+ Reporting With Multiple Data Sources

Hi -
We've been using BI+ Reports with multiple data sources on separate grids. We are wondering if there is a better way to ensure the user has their point of view bar in sync between the the data sources. In our case, both Data Sources are separate HFM applications with all the dimensions identical except the account which is defined on the report. We are not using Metadata Management.
I'm aware of the "Merge Equivalent Prompts" in the Preferences > Financial Reporting window, but this does not always ensure the users have the same point of view.
What practice are other companies using to make sure the user runs the reports accurately with both point of view bars pulling the same entity/year/period.
Thanks in advance.

Thanks for your answer, however my question - I know it looks quite messy - is not directly related to data templates, my problem is that at the moment I am using a stored procedure following - almost exactly - what another procedure does in oracle EBS to call a BI publisher report.
1. This procedure populates some temporary table with the xml data where the concurrent request picks it up and uses it to populate the BI publisher template.
2. However I can't go and specify the XML location in my data template as this is not an option for us (i.e. reading the xml from the temporary table), so I am looking for another way to populate the BI publisher template (Note: I can't as well include the SQL queries in my Data template).
Thanks ;)

Target Spry RowID on page with Multiple data sets from another page

Hi all,
I am trying to target a specific data item, on a page with
multiple data sets, from a link on another page. (I also have to
pass the link through Flash, but lets start with the simple
part...)
You can take a look at the site in progress here:
http://www.3andband.com/TestSite/iframeTest3.html
From the Home page I want to link to specific news or concert
items on the News page
I have been trying to get SpryURLUtils to do it but I can't
seem to get it working.
Any help would be greatly appreciated.
Thanks!
Ben

did u try if it even passes the row value?? with a simple
alert? alert(params.row)
Also maby u need to reorder the scripts to this;
<script src="../SpryAssets/SpryURLUtils.js"
type="text/javascript"></script>
<script src="../SpryAssets/xpath.js"
type="text/javascript"></script>
<script src="../SpryAssets/SpryData.js"
type="text/javascript"></script>
<script src="../SpryAssets/SpryCollapsiblePanel.js"
type="text/javascript"></script>
<script src="../SpryAssets/SpryEffects.js"
type="text/javascript"></script>
<script src="../SpryAssets/SpryAccordion.js"
type="text/javascript"></script>
and your js script
var params = Spry.Utils.getLocationParamsAsObject();
var dsConcerts = new
Spry.Data.XMLDataSet("includes/concerts.xml", "Concerts/concert");
dsConcerts.setColumnType("image", "image");
var dsNews = new Spry.Data.XMLDataSet("includes/news.xml",
"News/item");
//Set an observer so that when the data is loaded, we update
the current row to the url param value
dsNews.addObserver({ onPostLoad: function(ds, type) {
dsNews.setCurrentRow(params.row); }
function MM_effectBlind(targetElement, duration, from, to,
toggle)
Spry.Effect.DoBlind(targetElement, {duration: duration,
from: from, to: to, toggle: toggle});
So url params get loaded before the data

How to tune performance of a cube with multiple date dimension?

Hi,
I have a cube where I have a measure. Now for a turn time report I am taking the date difference of two dates and taking the average, max and min of the date difference. The graph is taking long time to load. I am using Telerik report controls.
Is there any way to tune up the cube performance with multiple date dimension to it? What are the key rules and beset practices for a cube to perform well?
Thanks,
Amit

Hi amit2015,
According to your description, you want to improve the performance of a SSAS cube with multiple date dimension. Right?
In Analysis Services, there are many tips to improve the performance of a cube. In this scenario, I suggest you only keep one dimension, and only include the column which are required for your calculation. Please refer to "dimension design" in
the link below:
http://www.mssqltips.com/sqlservertip/2567/ssas--best-practices-and-performance-optimization--part-3-of-4/
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Is it currently possible to create a doughnut chart with multiple concentric circles in SSRS?

Is there currently any way to create a 'doughnut' chart with multiple concentric circles in an SSRS report (any version), without using 3rd party tools?
Something like this, perhaps?
(For that matter is it possible to create this using JavaScript? It's my understanding that this image was originally created in a web app using JavaScript. So far I've not been able to pin down the details. I've found hints that JavaScript
can be used in SSRS reports but so far no clear working examples.)

Hi B.Chernick,
According to your description, you want to create a create a doughnut chart with multiple concentric circles in your report. Right?
In Reporting Services, we only have doughnut chart with one concentric circle. All the category group is in that concentric circle. Though we can embed javascript injection in expression, it only give the css style to values or report
items which can change the looking. It can't change the structure of the report items itself. So your requirement can't be achieved current.
For your requirement, we suggest you provide Microsoft a feature request at
https://connect.microsoft.com/SQLServer
so that we may try to expand the product features based on your needs.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Help: Chart with multiple data points

Similar Messages

Maybe you are looking for