Help! ClassCastException with Tomcat and HttpsUrlConnectionOldImpl

Hi,
I am trying to perform an HTTPS call from a servlet running under Tomcat 5.5, JDK 1.5.0 . When I do, I get this error:
java.lang.ClassCastException: com.sun.net.ssl.internal.www.protocol.https.HttpsURLConnectionOldImpl
at rcopia.util.WebUtils.setAutoVerify(WebUtils.java:1398)
at rcopia.util.WebUtils.getURLConnection(WebUtils.java:1377)
(etc).
I have included
System.setProperty("java.protocol.handler.pkgs", "javax.net.ssl");
but it doesn't seem to help. How can I get Tomcat to use the new javax.net JSSE rather than the old com.sun.net... packages it is rying to use?
Please help!
Brandon

System.setProperty("java.protocol.handler.pkgs", "javax.net.ssl");Don't do that. It's for JDK 1.3 and the JSSE extension.

Similar Messages

  • I want to transfer pictures from my iphone 4 to a hardrive, but the problem is i dont know how. Can the genius bar help me with that, and can they possibly do this for me if i bring my iphone and hard drive with me there. Also if there is a cost, how much

    I want to transfer pictures from my iphone 4 to a hardrive, but the problem is i dont know how. Can the genius bar help me with that, and can they possibly do this for me if i bring my iphone and hard drive with me there. Also if there is a cost, how much?

    iOS: Importing personal photos and videos from iOS devices to your computer

  • How to use JMS with tomcat and Axis

    Hello
    I'm new in ii, so i'm still a little bit lost. I have been implementing web services with tomcat and Axis. However, these services are synchronous and I would like that some services were asynchronous.
    I've been reading about the topic and I've found that JMS is a good solution for it. I have already downloaded JMS in my computer but now I don't know what else to do. I've been trying to run the SimpleQueueSender.java example but I get the error:
    JNDI API lookup failed: javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
    But I have attached all .jar from F:\Sun\MessageQueue\lib
    In addition to this, for my first webservices I used the Java2WSDL, WSDL2Java and AdminClient (axis tool) to create my web services bindings, stubs and skeletons and to deploy the web service on the server. Do I have to use them now with JMS? or now the deployment must be performed in a different way?
    Thank you in advanced,

    The error means that you have to specify the type and location of your jndi store. You could create a jndi.properties file and put two properties in it:
    java.naming.provider.url=file\\\:////var/jndi
    java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory
    for a file based jndi store. Then you have to make sure your jndi.properties file is in your CLASSPATH. Then you have to use something like imqadmin to create your jndi store and store in it your administrative objects like Queues and QueueConnectionFactories.

  • Help needed with header and upload onto business catalyst

    Can someone help with a problem over a header please?
    I have inserted a rectangle with a jpeg image in  background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
    That's one problem.
    The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
    And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
    Can anyone help ? Thanks.

    Thanks for replying,
    How can I check the preview in other browsers before I publish a provisional site with BC?
    The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
    In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
    Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
    Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
    I’m a novice with Muse with an ambitious site !
    Thanks for your help.
    Mary Featherstone
    Envoyé depuis Courrier Windows
    De : Sanjit_Das
    Envoyé : vendredi 14 février 2014 22:15
    À : MFeatherstone
    Re: Help needed with header and upload onto business catalyst
    created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion 
    Hi
    Answering the questions :
    - Have you checked the preview in Muse and also in other browsers ?
    - Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
    - In design view the rectangle is set to 100% browser width ?
    With publishing :
    - Please try to rename the image file and then relink
    - If it happens with other images as well , see if all the image names includes strange characters or spaces.
    - Try again to publish
    With e-mail from BC :
    - Under preferences , please check the country selected.
    - If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
    Thanks,
    Sanjit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Pls help me with  Mac and had a trial  serial number problems

    Hi,
    I downloaded first the trial version of Photoshop, after 30 days finished but the icon still remained.
    Now, when purchased a creative suite 4 Designe premium, installed, all programs are fine, just the photoshop not working, asking for serial number but when I type the right numbers, doesn`t accept.
    What can I do? any idea?
    to uninstall the photoshop and install again?
    but if I have the other programs working and installed?

    Hi,thank you, that is fine, just not so quick but I resolved the problem alone.Thanks anyway you helped me.Eva
    Date: Sat, 1 Aug 2009 11:53:58 -0600
    From: [email protected]
    To: [email protected]
    Subject: Pls help me with  Mac and had a trial  serial number problems
    Hello, Eva. For CS4 problems, you need to ask in the Photoshop forum (this is the Photoshop Elements forum). It's here:
    http://forums.adobe.com/community/photoshop/photoshop_macintosh
    Good luck!
    >

  • SSL mutual authentication with Tomcat and IE

    Hi,
    I am trying to set up mutual ssl with Tomcat.
    Everything works fine on the server but I cannot authenticate the client.
    The client is my internet explorer browser. This is what I have tried.
    -Generated an ssl server certificate using keytool.
    -Generated a certificate for the client
    -exported it to a .cer file
    -imported it to a truststore and moved it into the cacerts file
    I have verified this because tomcat lists my client certificate as a trusted
    one at start up.
    After this I installed the .cer file into IE and tried accessing the server.
    Handshake fails: "bad_certificate"
    I have searched all around the net trying to find someone who had done something like this, could not find anything. Can anyone please help me through this setup.
    -thanks

    Oh I find that there is different code base of WLS 7.0.0!!
    - WLS 7.0.0 of Mai 2002 is propagating the principal correctly with SSL
    mutual authentication.
    - WLS 7.0.0 of Juli 2002 is NOT propagating anymore! (the patch is appliable
    to this)
    Obviously BEA published different nightly builds of the same WLS 7.0.0 on
    the web.
    Is this normal?
    Regards
    Alain Hsiung
    "Alain Hsiung" <[email protected]> wrote in message
    news:[email protected]..
    I think that SP1 has a bug: it cannot propagate the principal when SSL
    mutual
    authentication is used. I fixed it with a small patch. Now the principalis
    propagated
    correctly with SSL mutual authentication on WLS 7.0.1 (WLS 7.0.0 isworking
    without patch).
    Alain Hsiung
    "Alain Hsiung" <[email protected]> wrote in message
    news:[email protected]..
    Hi all
    I make SSL mutual authentication work between 2 WLS 7.0 servers.
    As I upgrade to WLS 7.0 SP1 the principal propagation doesn't workanymore:
    the principal on the target WLS is always "anonymous"!
    Is this a bug or is there something new to parametrize?
    Regards
    Alain Hsiung

  • Remote Server Debugging with Tomcat and Eclipse

    Hi ,
    I am using Tomcat 4.0, Jdk1.3 and eclipse 2.1 ,Windows 2000
    I am trying for past 5 days, Remote Server Debugging.
    But I can't acheive.Please help in this tough situation.
    I have configured Tomcat to run in debug mode by the following steps:
    1) In catalina.bat, SET CATALINA_OPTS=-server -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=8000
    2) Then I set the JAVA_HOME AND TOMCAT_HOME in the environment mode.
    3) Then I clicked the startup.bat in the bin directory.
    In Eclipse side , I followed as,
    1) Run/Debug/Remote Java Application/New/
    In the connect tab, I gave host:localhost and port:8000
    2) Then I clicked Debug button.
    I didn't use any plugin.
    But it producing "Failed to connect to Remote VM.Connection refused."
    So I gave host:localhost and port:8080 in eclipse side,
    but this I am getting errorin eclipse side as "Failed to connect to Remote VM".In server side, I am getting error as,
    java.lang.NullPointerException
    at org.apache.catalina.connector.http.HttpResponseStream.checkHead(HttpR
    esponseStream.java:253)
    at org.apache.catalina.connector.http.HttpResponseStream.<init>(HttpResp
    onseStream.java:104)
    at org.apache.catalina.connector.http.HttpResponseImpl.createOutputStrea
    m(HttpResponseImpl.java:220)
    at org.apache.catalina.connector.ResponseBase.getOutputStream(ResponseBa
    se.java:725)
    at org.apache.catalina.connector.ResponseBase.finishResponse(ResponseBas
    e.java:469)
    at org.apache.catalina.connector.HttpResponseBase.finishResponse(HttpRes
    ponseBase.java:236)
    at org.apache.catalina.connector.http.HttpResponseImpl.finishResponse(Ht
    tpResponseImpl.java:288)
    at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcesso
    r.java:1039)
    at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.ja
    va:1107)
    at java.lang.Thread.run(Thread.java:484)
    Please do the needful
    If you have anwser, Please mail to [email protected]

    Well, once you're already using MyEclipse, I have it set up even simpler than that. Go to Window/Preferences/MyEclipse/Application Servers/Tomcat4/Launch and set the launch mode to debug.
    This works if the project is successfully setup as a webproject in MyEclipse.
    My problem is that I have a project that was not developed with MyEclipse and for some reason does not work when I set it up as a web project in MyEclipse. MyEclipse seem to do something funny with it when I establish the project. Now, if I set it up simply as a java project (as oppposed to Web Project) in myEclipse, then MyEclipse does not give me an option of deploying it.
    Any ideas about how I would go about debugging a project that's not set up as a Web Project in my eclipse?

  • CAn anyone help me with MAIL and my earthlink account?

    I've had DSL with Earthlink for several years now and never had connection problems. In the past two weeks, however, MAIL will sometimes fail to send email and sometimes fail to retrieve email from my Earthlink webmail account. The strangest thing is that this happens intermittently, even though no settings have been changed. Most of the time I can retrieve email, but other times I get the error message that "port 110 has timed out". Most of the time, I cannot send email, but other times the email shoots right through when I open mail.
    I called Earthlink about this and we set up my MAIL program step by step according to Earthlink guidelines. Unfortunately, this did not help the matter.
    My MAIL preference settings are as follows:
    My incoming mail server is pop.mindspring.com on port 110.
    My outgoing mail server is smtpauth.earthlink.net. The outgoing server port is 587. SSL is not checked. Authentication is by password.
    All of these settings are correct according to the Earthlink tech.
    If this matters, my G5 is connected wirelessly to an Airport Express base station.
    Again, I'm puzzled that I've only just begun to have these issues and they seem to happen randomly.I also see that similar discussions have been had on this forum with Earthlink and MAIL, but I don't see any resolutions. Can anyone shed some light on this? Thanks.
    Message was edited by: Kevin Robinson
    Message was edited by: Kevin Robinson

    I had problems with my Earthlink DSL quitting about a month ago. I went through some of the same Earthlink tech support troubleshooting hoops, hooking directly into my ethernet port not into the Airport etc. Eventually an Earthlink senior tech said my Netopia modem was defective. After some financial haggling they sent me a new Zycel modem, that didn't work either. Earthlink made an appointment and sent out an AT&T tech to the house. He hooked in and said it was a defective phone company circuit board. The AT&T tech called in for the phone company to change the circuit board now both the Netopia and Zycel modems work.
    Note: while checking the line, the AT&T tech it my DSL line was sending one protocol it would work if my modem was set up to receive it. (protocol is my word I don't remember his exact word).
    Another Note: Also when Earthlink wanted to replace my modem they wanted my to pay (the dollar amounts are approximate) $80 for an new modem, or get a free modem with an exorbitant $40 shipping fee and commit to an other year of service. I eventually bargained down to a free modem, free shipping and $20 off the monthly fee.

  • External Hard drive help: use with mac and pc? how to backup everything etc

    Hello! I need some help regarding a new external hard drive I got from OWC. It is a 500 gb firewire 400 + usb 2.0 7200 rpm hard drive. I am running it from firewire. The software suggests the first thing you do is make a clone of your macbooks internal hard drive, that way if it fails later you can use the external to back everything up. If I do this ...
    1. do I have to make the drive "Bootable" ? I have software called Data Backup 3 by Pro soft I think. It came with my external.
    2. Can I still back up other stuff like my audio recordings and record onto that drive to a seperate folder?
    3. If I make a bootable copy will it try and boot from the drive everytime I turn it on or something?
    My other question is... how can I use this drive with a pc? I have a pc as well and I heard that the only way it will work is to format it in ms-dos mode (fat32?)
    If I write it to fat32 will it slow down my drive or make it worse? I heard that you should format external drives specifically for mac if you have a mac; so it will only work with macs...
    (sorry this is going on and on; it's like a chain reaction of questions)
    so If its formatted to mac drive format then can I do this with my current situation:
    1. I have wireless internet, the router is on a pc downstairs
    2. Can I send files over a network somehow from the pc to my mac
    3. then store it on my external?
    If so can someone point me in that direction with a link?
    Thank you for reading, sorry for making this so long.

    1. No, you don't have to make a bootable clone.
    2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
    3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
    If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
    FAT32 is slower for read/write on the Mac than using Mac formatting.
    Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
    You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
    Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
    Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
    Mac OS X 10.5 Help- Sharing with Windows computers

  • Third Party API with Tomcat and Axis

    I'm experimenting with creating web services in Java. I'm using tomcat and axis for this. I have successfully created and deployed some basic web services and now I want to create one using a 3rd party API. I follow the same exact procedure and when I deploy the service I check my list of deployed services through the axis page, but all my services have disappearred. Commenting out all 3rd party related methods does successfully deploy the service. Is there anything special/extra I have to do to get 3rd Party classes to function correctly in a web service?
    Thanks in advance

    what kind of third party API are using ?

  • Using Third Party APIs with Tomcat and Axis

    I'm experimenting with creating web services in Java. I'm using tomcat and axis for this. I have successfully created and deployed some basic web services and now I want to create one using a 3rd party API. I follow the same exact procedure and when I deploy the service I check my list of deployed services through the axis page, but all my services have disappearred. Commenting out all 3rd party related methods does successfully deploy the service. Is there anything special/extra I have to do to get 3rd Party classes to function correctly in a web service?
    Thanks in advance

    If you're using Tomcat, JARs in the /common/lib directory are available to all applications deployed on that instance of Tomcat.
    I prefer putting them in the WEB-INF/lib of my web app, even if that means duplication. That way my app doesn't depend on having the server set up a certain way. I deploy them as a WAR file with everything they need enclosed within,no more and no less. They're completely portable to any servlet/J2EE engine that way.
    %

  • Question regd C++ and Java with Tomcat and SSL

    I have configured Tomcat with SSL and am running a servlet
    which is going to recieve input from a C++ Application.
    The team which are coding in C++ have a statement in their C++
    code 'HTTP1.1'
    My Tomcat is v 3.2.4
    Does this support HTTP 1.1 OR HTTP 1.0 PROTOCOL.??

    tomact latest version supports both HTTP specifications 1.1 and 1.0. If you want to make sure you for tomcat 3.2.4 then you can search the web and jakarta website for this.
    Regards
    Akhil Nagpal

  • Newbie - help needed with array and dictionary objects

    Hi all
    Please see the code below. I've posted this code in another thread however the original issue was resolved and this is now a new issue I'm having although centered around the same code.
    The issue is that I'm populating an array with dictionary objects. each dictionary object has a key and it's value is another array of custom objects.
    I've found that the code runs without error and I end up with my array as I'm expecting however all of the dictionary objects are the same.
    I assume it's something to do with pointers and/or re-using the same objects but i'm new to obj-c and pointers so i am a bit lost.
    Any help again is very much appreciated.
    // Open the database connection and retrieve minimal information for all objects.
    - (void)initializeDatabase {
    NSMutableArray *authorArray = [[NSMutableArray alloc] init];
    self.authors = authorArray;
    [authorArray release];
    // The database is stored in the application bundle.
    NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
    NSString *documentsDirectory = [paths objectAtIndex:0];
    NSString *path = [documentsDirectory stringByAppendingPathComponent:@"books.sql"];
    // Open the database. The database was prepared outside the application.
    if (sqlite3_open([path UTF8String], &database) == SQLITE_OK) {
    // Get the primary key for all books.
    const char *sql = "SELECT id, author FROM author";
    sqlite3_stmt *statement;
    // Preparing a statement compiles the SQL query into a byte-code program in the SQLite library.
    // The third parameter is either the length of the SQL string or -1 to read up to the first null terminator.
    if (sqlite3preparev2(database, sql, -1, &statement, NULL) == SQLITE_OK) {
    // We "step" through the results - once for each row.
    // We start with Letter A...we're building an A - Z grouping
    NSString *letter = @"A";
    NSMutableArray *tempauthors = [[NSMutableArray alloc] init];
    while (sqlite3_step(statement) == SQLITE_ROW) {
    author *author = [[author alloc] init];
    author.primaryKey = sqlite3columnint(statement, 0);
    author.title = [NSString stringWithUTF8String:(char *)sqlite3columntext(statement, 0)];
    // FOLLOWING WAS LEFT OVER FROM ORIGINAL COMMENTS IN SQLBooks example....
    // We avoid the alloc-init-autorelease pattern here because we are in a tight loop and
    // autorelease is slightly more expensive than release. This design choice has nothing to do with
    // actual memory management - at the end of this block of code, all the book objects allocated
    // here will be in memory regardless of whether we use autorelease or release, because they are
    // retained by the books array.
    // if the author starts with the Letter we currently have, add it to the temp array
    if ([[author.title substringToIndex:1] compare:letter] == NSOrderedSame){
    [tempauthors addObject:author];
    } // if this is different letter, then we need to deal with that too...
    else {
    // create a dictionary to store the current tempauthors array in...
    NSDictionary *tempDictionary = [NSDictionary dictionaryWithObject:tempauthors forKey:@"authors"];
    // add the dictionary to our appDelegate-level array
    [authors addObject:tempDictionary];
    // now prepare for the next loop...
    // set the new letter...
    letter = [author.title substringToIndex:1];
    // remove all of the previous authors so we don't duplicate...
    [tempauthors removeAllObjects];
    // add the current author as this was the one that didn't match the Letter and so
    // never went into the previous array...
    [tempauthors addObject:author];
    // release ready for the next loop...
    [author release];
    // clear up the remaining authors that weren't picked up and saved in the "else" statement above...
    if (tempauthors.count > 0){
    NSDictionary *tempDictionary = [NSDictionary dictionaryWithObject:tempauthors forKey:@"authors"];
    [authors addObject:tempDictionary];
    else {
    printf("Failed preparing statement %s
    ", sqlite3_errmsg(database));
    // "Finalize" the statement - releases the resources associated with the statement.
    sqlite3_finalize(statement);
    } else {
    // Even though the open failed, call close to properly clean up resources.
    sqlite3_close(database);
    NSAssert1(0, @"Failed to open database with message '%s'.", sqlite3_errmsg(database));
    // Additional error handling, as appropriate...
    Message was edited by: dotnetter

    Ok, so I know what the issue is now...I just don't know enough to be able to resolve it!
    it's the tempAuthors objects.
    It's an NSMutableArray which is create on the line before the start of the WHILE loop.
    Having looked through the debugger, I can see that each dictionary object is created (with different codes which I assume are memory addresses) so all is well there. However, on each iteration of the loop in the middle there is an IF...ELSE... statement which in the ELSE section is clearing all objects from the tempAuthors array and beginning to repopulate it again.
    Looking at the containing dictionary objects in the debugger I can see that the tempAuthors object that each contains has the same code (again, I'm assuming this is a memory address) - so if I understand correctly, it's the same object...I assumed that when I created the dictionary using the dictionWithObject call that I would be passing in a copy of the object, but it's referencing back to the object which I then go on to change.
    Assuming the above is correct, I've tried several "stabs in the dark" at fixing it.
    I've tried relasing the tempAuthors object within the ELSE and initialising it again via an alloc...init - but this didn't work and again looking through the debugger it looks as though it was confused as to which object it was supposed to be using on the following iteration of the WHILE loop (it tried to access the released object).
    Having read a little more about memory management can someone tell me if I'm correct in saying that the above is because the tempAuthors object is declare outside the scope of the WHILE loop yet I then try to re-instantiate it within the loop (does that make sense???).
    Sorry for the long post...the more I can understand the process the less I can hopefully stop relying on others for help so much.
    I am continuing to read up on memory management etc but just not there yet.
    Regards
    Wayne

  • Help needed with footers and shrinking text

    Hi Guys
    I got a report that I want to print conditional headers and footers for. When I specify that I only want a foooter to appear on the last page, I get REP-1216 error, I checked out Metalink and followed a note on how to get around it but I'm having no joy. Can anyone help me out? I also want to make certain bits of the header and footer visible depending on a value retrieved from the report query only I get REP-1314 saying that my format trigger referencesa column at the wrong frequency. I know the value is in another frame but how do I make this value available in the margin so that the formatting will work?
    Also, I want to be able to shrink some lines of an address if it has a null value at runtime e.g
    My House
    First Address Line
    Second Address Line
    <Null>
    Post Code
    I want to format it so that it appears as:
    My House
    First Address Line
    Second Address Line
    Post Code
    I really appreciate if someone could help me out as always this is very urgent!
    Many thanks
    Ciaran

    Hi Ciaran,
    I only want a foooter to appear on the last page
    I am quoting from Note 1017067.102 on Metalink (REP-1216 when running report with field in margin) - you might have already seen this note...
    Objects in the margin region are restarted on every physical page. As a
    result, not all print condition types make sense for margin objects. Because
    objects are restarted on every page, it is as if you are always on the first
    page of the object.
    The print condition FIRST is the same as the print condition ALL.
    The print conditions LAST and ALL BUT LAST are invalid because "LAST" is never
    reached.
    The print condition ALL BUT FIRST causes the object to never appear because
    the object never goes beyond "FIRST" page.
    Thus, the only valid print conditions for the object are FIRST and ALL.
    also want to make certain bits of the header and footer visible depending on a value retrieved from the report queryYou can use conditional formatting / format trigger only for objects that are in the same group in the data model. For example, you can reference employee_id in the format trigger of employee_name if they are in the same group. In your header / footer Format Trigger, you can reference only report-level columns. So if you can make your column to appear at the report level (outside of any group), you may be able to reference it from the header / footer.
    want to be able to shrink some lines of an address if it has a null value at runtime You may be able to use Anchors. See Builder Help for more information and examples.
    Navneet.

  • Help needed with doubles and integers

    I just want to start telling all you that you have been a big help to me the last couple of months. Now, for my issue. I'm having a problem doing some work with doubles and integers. Below is the code I've tried. But, I keep getting mismatch types. I need num3 to fill in a JTextField by the end with the answer for the calc. Num2 is fill in from a JTextField with a double.
    Int num1 = 0, num4 = 0, num3 = 0;
    double num2 = 0, totint = 0;
    for(count = 0; num4 < count; count++)
    totint = (1 + num2);
    System.out.println(totint);
    num3 = double (num1 * totint);
    String k = Integer.toString(num3);
    tf3.setText(k); (This is a JTextField)
    Test data
    num1 = 10000
    num2 = 3.4
    num4 = 4
    num3 = the value from the calc

    First of all, your for loop is never going to run.
    for (count = 0; num4<count; count++)
    totint = (1 + num2);
    System.out.println(totint);
    num4 = 4 and will not be less than count, so the for loop will not be executed.
    Second, what exactly are you trying to accomplish here. The way you have your code set up, the for loop (if it were to execute) would print out 4.4 each time it passes, then do the calculation. You may need to rethink your objective.

Maybe you are looking for