Help clearing out old programs after upgrade

Before upgrading from 10.5 to 10.6, I had moved my application shortcuts into subfolders (i.e. Office Apps, Multi-media, etc). The upgrade did not find them and these icons remain in those folders. When I try to launch the Apple programs, a message states that this is an old version and cannot run.
How do I safely remove those old programs?

Here's Uninstalling Apps.
DALE

Similar Messages

  • Is there any way so that I Being able to clear out old data from the Order

    Hi Friends,
    Is there any way so that I Being able to clear out old data from the Order Gate forecast, tolerance, and confirmed order to date tables on a monthly basis?
    Means I want data in data table for particular time (I want that if suppose today is 13-11-2008 then my data table must contain data from 13-10-2008 to 13-11-2008.
    Is it possible thru ABAP development or thru any t codes ?
    Any pointers will be rewarded.
    Regards

    hi,
    Before archiving you have to put the Deletion flag for the object(May be for PO, MMR etc as per your req.)...
    After that the you use the archiving procedure to archive the docs which are already flagged for deletion...
    For MMR you use the transaction SARA...and its respective object for the archiving....
    You can use the SDN search to see the many threads on it...
    Or use this link as per your req. and make the search...
    http://help.sap.com/saphelp_erp2004/helpdata/EN/75/ee0fa855c811d189900000e8322d00/frameset.htm
    Regards
    Priyanka.P

  • Pmessenger kick me out ! even after upgrade the frimware to 5.1.1 !

    Pmessenger kick me out ! even after upgrade the frimware to 5.1.1 !
    i deleted many times and reinstall
    it kick me out when making retrieving the contacts
    but when i close WI-FI the Pmessanger didn't kick me out !
    is it from connection or what ?
    any one face this problem ? and solved ?

    Hello, rohan.kishore.patel. 
    Thank you for visiting Apple Support Communities.
    Battery life can be difficult to troubleshoot as multiple factors contribute to how long a charge can last.  Graphic intensive applications, display brightness and data connectivity are just a few of the items that can cause the battery life to decrease rapidly.  I would need to know a little more information about your usage patterns to give you and idea on how to maximize battery life.  However, here are some tips on how to adjust settings and charge the device that may help.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/ht1476
    About Batteries
    About iPhone Batteries
    If you feel that you need assistance with the battery concern, you can always reach out to us via the link below.
    Contact Apple
    Cheers,
    Jason H

  • Can't open old mail after upgrade to yosemite

    can't open old mail after upgrade to yosemite OS X 10.10. My old mail was version 6.6. The new version is 8.0. What to do??

    How are you trying to open it, and what exactly happens?

  • How do I clear out old contacts from showing up on new contact searches

    How do I clear out old contacts from showing up on new contact searches

    Go to Settings > Mail, Contacts, Calendars > Show In App Switcher
    From there you can turn off Phone Favorites and/or Recents

  • Clearing out old process data

    How can I clear out old process data? In my test environment, I have several hung tasks that will not terminate. The tasks exist, but the process they were associated with no longer do.

    There was a bug in 8.0 that I believe is fixed in 8.2 where tasks assigned to a group were not removed when the process was terminated.
    Your easiest solution right now is:
    - create a dummy local user called "dummy" or something like that
    - go into adminui/process management/task management, find the tasks, and allocate them to the dummy user.
    They will still be there, but at least they won't irritate anyone.
    Howard
    http://www.avoka.com

  • TS4118 Can I retrieve to do list from old calendar after upgrading to mountain lion?

    Can I retrieve "to do list" from old calendar after upgrading to mountain lion?

    Hello MacMystie,
    Thank you for using Apple Support Communities. 
    If you have a recent backup with the old "to do list" you can use the following article will provide information on recovering information from a backup. 
    Recovering iCloud contacts, calendars, and bookmarks from an iTunes backup of an iOS device - Apple Support
    Regards,
    Jeff D. 

  • Mavericks Mail; difference in delete folder and trash folder?  I don't know which folder to use clearing out old messages, spam, junk and other detrious I might want to recover in the future and which folder for highly sensitive or personal  informa

    I don't know which folder to use clearing out old messages, spam, junk and other detrious I might want to recover in the future and which folder for highly sensitive or personal  in formation I want to keep confidential.

    More to my question regarding standard Mail folders, how do Trash and Delete differ in function?

  • Clearing out old software

    I am trying to clear out all remnants of old software, before upgrading to Snow Leopard. (I don't want to do a clean install, just put everything in order before doing a normal one.) For example, I discovered that my trial of Retrospect 8 had left the engine running, so to speak. I just now managed to remove that (after a bit of research).
    I also see that MacFUSE has left a preferences pane. I don't know what this software is, but suspect it was installed by some other software. Anyway, it has a button to Remove the software, but when I press it, it says the software doesn't seem to be installed. How do I get rid of this preferences pane, and make sure all trace of MacFUSE are gone?
    And how do I make sure there aren't other half-uninstalled things lying around?...
    TIA
    Nic

    Here's Uninstalling Apps.
    DALE

  • I need to delete programs that have been duplicated after the software update has been done.  The computer won't delete them.  Anyone else having this problem and if so, how do I delete the old program after it's been updated.

    After upgrading software, it appears the old software isn't deleted.  My computer hard drive is almost full so I need to delete a ton off of my computer.  When checking the software that can be deleted I noticed I can the old software hasn't been deleted.  How can a person do this?  Any suggestions on how to quickly dump some programs.

    Sig is right — reclaiming space on your hard drive should be a matter of looking for the largest files you can delete, not starting with applications. I have 200+ applications on my hard drive, and altogether they occupy less than 14GB of space. Just a handful of them — Acrobat Pro, iPhoto, Aperture, Illustrator, Photoshop, InDesign and Adobe Media encoder — are larger than 500MB apiece, and if I disposed of all of those, I'd only get 5.6GB back. My Utilties folder contains 78 apps, and it only amounts to 1.1 GB.
    If you have any feature-length movies on your hard drive, those should be the first things you trash or move to an external drive.

  • [SOLVED] Trying to load old kernel after upgrade

    Hi, apologies in advance for asking this if it's a repeating situation but I searched and read for the better part of the day with no avail.
    I updated to kernel 3.1.9 today and everything compiles fine, with no errors. After reboot is when it fails to load user specific modules, which I think I narrowed down to /lib/modules/3.1.8. That would make sense because with uname -r it is still showing 3.1.8 after -Syu and reboot but everything else is configured for 3.1.9. I checked the menu.lst and it is pointed to initramfs and the build of that was reported successful. I don't have any kernel .deps from AUR and I was updating with packer anyways. There is one error being reported in xorg.conf that Nvidia driver fails to load and no driver available even though it compiled without issue. Anyways I'm not sure what info to post for you to help me out, but I'll be glad to if you let me know.
    Thank guys.
    Oh and for the meantime I just downgraded the kernel and everything works fine. I know I could just stay on this setup and be good but I installed Arch specifically to challenge myself and learn.
    Last edited by quantumfunk (2012-01-14 21:58:58)

    Hi thanks for your response. I made sure to have /boot mounted during the upgrade but it did not alter the outcome.
    It is in fact failing to load ACPI modules after the update. If that might be of some assistance.
    I'm still reading as much as I can find, maybe you can point me in the direction of a thread that could help?
    So far I'm following this one https://bbs.archlinux.org/viewtopic.php?id=114003 to no avail.
    Last edited by quantumfunk (2012-01-14 20:02:26)

  • Where's the "Clear" button in Maps after upgrading to iOS 5?

    Subject pretty much sums it up.  After upgrading to iOS 5 I found that they seem to have removed the Clear button from the Directions feature.  How can I clear a route in the updated version of the app? Thanks.

    iPhone 5
    Just wanted to add instructions on how to clear the recent routes history.
    1  Open maps app. to view the actual map screen (not the route screen that shows the routing history).
    2  Touch the little book icon in the upper right corner. Then you should see tabs at the bottom of the screen labeled "Bookmarks, Recents, Contacts".                                                          
    3  Touch the "Recents" tab. Then you should see a list of the past routes you have looked up.
    4  Touch the "Clear" tab in the upper left corner. Then you should see 2 options to either "Clear All Recents" or "Cancel".
    5  Touch the "Clear All Recents" tab (shown in red). Then you should see the screen wiped clear.
    6  Touch the "Done" tab in the upper right corner.
    If you still see the very last route on your map: Then touch the "X" on the upper part of the screen, on the left side of the little book icon, located within the Search bar. Then you should only see the blue dot, representing your current location.
    I hope this helps.

  • Please help: Application doesn't work after upgrade to Workshop 8 sp2 from sp1

    Hi,
    Our application worked on workshop 8 sp1. After we upgrade system from sp1 to
    sp2, some of the part doesn't work propertly any more.
    1. netui:select seems not bind form data propertly. For drop down list box in
    forms, although user has chosen something from the drop down list box, the returned
    value in the form is always null.
    2. we use Java script window.open(url,...) to download and view files. After upgrade
    from sp1 to sp2, clients keep getting IE error complaining that "Internet Explore
    can not open this Internet site. The request site is either unavailable or can
    not be found. Please try again later", although the server and the files are all
    in local host server.
    Please help. Thanks

    Did you update your workshop application files and recompile your application?
    A few things changed between GA and sp2, some annotations were renamed, and some
    were added.
    If you open up your application in Workshop sp2, it should given you the option
    to upgrade your application.
    Failing that, you may need to go through the code that is not performing as it
    was before and check whether it was not utilising a bug that was fixed in sp2
    and thus causes it to not function correctly now.
    "Cynthia" <[email protected]> wrote:
    >
    Hi,
    Our application worked on workshop 8 sp1. After we upgrade system from
    sp1 to
    sp2, some of the part doesn't work propertly any more.
    1. netui:select seems not bind form data propertly. For drop down list
    box in
    forms, although user has chosen something from the drop down list box,
    the returned
    value in the form is always null.
    2. we use Java script window.open(url,...) to download and view files.
    After upgrade
    from sp1 to sp2, clients keep getting IE error complaining that "Internet
    Explore
    can not open this Internet site. The request site is either unavailable
    or can
    not be found. Please try again later", although the server and the files
    are all
    in local host server.
    Please help. Thanks

  • Digital AV Adapter: "Accessory not supported" and "TV Out" settings gone after upgrading iPad 2 to iOS 5.0.1

    I've used the digital AV Adapter (bought in Apple Store) nicely on iPad 2 with iOS 4.3.x.
    After upgrading to iOS 5.0.1 the TV Out settings have disappeared from the General Settings menu (no matter if adapter is plugged in or not).
    I thought that maybe it was time to do a full reset (just in case), so I did that, while the adapter was still plugged in.
    When the iPad finished resetting I got a popup message on the lock screen saying:
    "This Accessory is Not Supported by iPad"
    The adapter sort of works, i.e. there is a picture on my TV, but I cannot control the TV output settings which I could in iOS 4.3.x.
    The TV Out settings are completely missing from the General Settings menu (if they were moved in iOS 5.0.1 somewhere else, I could not find them).
    The "TV Out" menu item is not there at all.
    I cannot select between PAL/NTSC output anymore which is crucial for me as it seems that the iPad current setting is PAL, while I need to be it NTSC, otherwise video drop frames/stutters when played back over a TV.
    What I would like to know if there is anybody out there who has iOS 5.0.1 and actually can see the "TV Out" settings under the General Settings (I think it should follow the "iTunes Wi-Fi Sync" directly), because no matter what I did I cannot the settings menu to be displayed (I've reset the device, plugged and unplugged the adaptor and HDMI cable multiple times, tried different TVs, etc)
    Or, if the settings are in fact, gone by design, then how am I supposed to play 23.976 or 24 FPS media on a 1080p50 TV without stuttering (don't answer that, I know it is impossible, I am just frustrated). This is the first ever device I bought from Apple and I must say I am not that impressed by such turn of events.
    I mean, what kind of update removes essential features and makes the officially produced accessory suddenly "not supported"? Did they even test their own official accessory?? Seems not to me.
    This thread is talking about sort of similar issue (although it is about the VGA adapter):
    https://discussions.apple.com/thread/2413622?start=0&tstart=0

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • Syntax error in standard program after upgrade

    Hi,
    After upgrade from 7.0 to 7.3, we are facing a syntax error in standard program that is used in one of our process
    The error says:
    The field "G_REQUIDPARENT" is unknown, but there is a field with the s"
    imilar name "G_REQUID_LAST". "G_REQUID_LAST"."
    The system cannot find this object inside include LRSBM_REQUEST_GUIP04, that belongs to program SAPLRSBM_REQUEST_GUI
    We assume that this is associated with the upgrade but we cannot find any solution in the web. Besides, this is a standard program so we cannot perform any change directly. We look for SAP Notes to apply but we didn't find nothing worthwhile
    Basically, we are receiving a dump with the error message posted above and we found the syntax error, but the thing is that we don't know how to fix it, due to the fact that is a standard program and we cannot change it
    I know that SAP could remove some object reference during the upgrade, but there should be an anticipated plan to fix this kind of errors, right?
    Can you shed some light on this, please ?
    Thanks a lot
    Ale

    Hi Ale,
    If you make sure there are no customization around the object and SGEN already run, I think you can just open a OSS message to SAP to looking for a fix.
    Regards
    Bill

Maybe you are looking for