HELP! Computer no longer sees base station

Hope that somebody can help - I recently changed the password settings on my airport extremem base station and all of a sudden my computer will not recognise that there is a base station in the vicinity - I am using air port admin assistamt. I have rescanned and rescanned to no avail.
Recently I did a hard reset of the base station and, although I can connect to the internet through the wireless connection (the generic apple base station name appears in my lists of networks available) but I cannot get into the admin assistant as the computer does not seem to recognise it. A mac that is runningh 10.3 recognised the base station and I could configure it with admin assistant but no joy with the main mac.
Any help would be great.
Many thanks!
Barnaby

Hi Barnaby,
You can reset the BaseStation's password again and start afresh (see the manual)
Can you ping the BaseStation from the Mac that refuses to see it (from the terminal)?
Message was edited by: fu

Similar Messages

Connecting a Dell computer to my airport base station

I am having trouble connecting to my wireless network with a Dell laptop. All other macs connect fine to my base station. I am getting a message saying " little or no connectivity" yet my Power book connects fine sitting right next to it. Not sure how to configure.

im sorry to say that i can't help,
but i too have the same problem with an airport express. I got it to setup
and my macbook pro is working fine w/ it, but its just my dell (vista) that doesnt seem to get it. Always limited access or no connectivity or somethin. Any suggestions?

I just had Uverse installed. The iMac which was my base station is now connected via my household electric ground connection. Another computer is now the base station. I have connected my Time Capsule to my computer by USB cable, but can't set it up

I just had Uverse installed. My iMac desktop has been the base station for my wi fi, but we had to connect it via ground wire of my electrical system and use another desktop as the base station [with windows op system]. We have connected my Time Capsule to the computer via USB cable. I believe that will require setting up the Capsule to use Ethernet, but the instructiions on the install disc only talk about using Airport. How can I find instructions for setting up using USB cable and Ethernet?
Thanks!
Charles Leach

All the manuals are listed at the head of the thread.
https://discussions.apple.com/community/wireless/time_capsule?view=overview
The TC cannot connect to the computer by USB.. it is network device.. it only connects by ethernet or wireless.. usb is for external drive or printer.

Need some help settin' up an Airport base station for dialup

Afternoon, all. As the handle says, I'm a newbie and I need some LGI about setting up an Airport base station to dial out. I just got a Macbook 2.0 yesterday, and I'm still trying to deal with the setup. This model has the 10.5 OS.
The Airport I'm using is not the square unit now available. This particular unit is a circular base with a conical shape. I got this model because it has the connection for a standard telephone connector. It's also 'sposed to have a built-in modem.
I have gotten the computer to connect to the base station wirelessly, but I am having trouble setting things up to get the modem to dial out to my ISP (netscape.)
Any assistance or walk-throughs would be greatly appreciated. THANKS!

Hello newbietoapple. Welcome to the Apple Discussions!
Perform a "hard" reset of the AirPort Extreme Base Station (AEBS)
o (ref: http://docs.info.apple.com/article.html?artnum=107451)
Setup the AEBS
Either connect to the AEBS's wireless network or connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Admin Utility, check these settings:
AirPort tab
o Base Station Name: <whatever you wish or use the default>
o AirPort Network Name: <whatever you wish or use the default>
o Create a closed network (unchecked)
o Wireless Security: Not enabled
o Channel: Automatic
o Mode: 802.11b/g Compatible
Internet tab
o Connect Using: Modem (V.90)
Network tab
o Distribute IP addresses (checked)
o Share a single IP address (using DHCP & NAT) (enabled)

HT1296 my computer no longer sees my iphone 5

My computer no longer shows my iphone 5 as a devise?

Have you tried rebooting your computer?
Have you tried rebooting your iPhone?
USB wired or WiFi?
What version of iOS?
What kind of computer?
What operating system?
What version of iTunes do you have on the computer?
Are you connecting directly to the computer, or to a USB hub (if it's USB)?

Computer no longer sees DVD or Zip drives

Hey there all,
Here's one for you. I have a G4 Gigabit Ethernet that I've upgraded with a Powerlogix 1.4 Ghz processor and an ATI Radeon 9800 Pro. The two drives that came with the computer (the Zip 100 and the DVD-ROM) have stopped working. I can't pinpoint exactly when because for a while I used them only rarely. I do know that they worked after upgrading the chip and I've only just now upgraded the graphics card so I don't think either of those have affected them.
They are still getting power because the light on the Zip comes on at startup (and will sometimes stay on for a loooooooong time though it doesn't make noise and there is no disk inside) and the DVD drive will still open and close. However, neither drive will mount when a disk of any sort is inserted.
I've tried running System Profiler and they don't show up in the lists there either. I checked the ribbon and power cords internally and all the connections SEEM ok. I even just now tried hitting the Cuda button to reset things but that turned up bupkiss.
Any ideas? Any advice? Anyone ever dealt with this before? I 've been shopping around for new drives but before I lay out the cash for that I want to make sure that these aren't saveable. This computer has been an absolute rock for about 6 years and has never had any major problems that I couldn't resolve so I'd hopefully not have to replace it.
Thanks all for your time and consideration, I'd really appreciate any and all help you can offer. Cheers!
G4 Gigabit Ethernet Desktop and 15" G4 Laptop Mac OS X (10.4.9) Mac OS X 10.3.9 on laptop

Hi, RaptorRed67 -
Does the fact that the Zip drive read light comes on at startup and stays on for minutes to hours afterwards bear any clues?
That light is intended to serve as a diesk-being-read indicator. If it stays steady on, that usually means the Zip drive has somehow managed to hang, and needs to be reset. It can also indicate a non-readable disk is lodged inside.
The way to address a disk hung inside is to restart, then immediately press the mouse button, keep it held down for a while. This is a hardware instruction to the Mac to eject all removable media, and operates before any drive has tried to load a disk which may be present.
If the drive itself has hung, which can happen after a non-mountable disk has been ejected, the only way to reset it is to power it off. This means shutting the Mac down - a restart won't do it.
Since you've unplugged that drive, the Mac was probably powered down when you did that. This would indicate there may be something else wrong with the drive, if it is in fact the culprit.
The two drives, optical and Zip, need to be jumpered correctly in order for both to function, just like hard drives. The optical drive should be jumpered as Master, the Zip drive as Slave. It is possible that a jumper fell off.
There may also be something wrong with the controller that serves the bus shared by the two drives. Don't know how to test for that other than to take the machine to an AASP.

Airport Express Base Station no longer supported.

Older version of Airport Express Base Station is no longer supported on my computer. Apple Support advises to install firmware update using Airport Utility 5.6. But I cannot install 5.6 on my system (running Lion 10.7.5). Help? Are older Express Base Stations useless?

The easiest and quickest solution would be to use...or borrow for 5-10 minutes.....another Mac running Leopard (10.5.x), Snow Leopard (10.6.x) or a PC with Airport Utility installed on it to administer the older Express.
If that is not possible, there are unsupported methods to install AirPort Utility 5.6 on a newer Mac, but you will have to decide whether to trust an unknown source for this, and accept the fact that there will be no support if something goes wrong.
The Internet is the place to look if you decide to do this.

Computer no longer recognizes hardware with firewire

I have a Canon GL2 and a Sony GV-HD700 that plays mini SD tape. Suddenly the computer no longer sees the hardware and will not allow me to download video. Been on the phone to Apple Care and Genius Bar and they can't help me. I am getting worried. What happened?

Hi
May be help here ?
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
iMovie pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. *com.apple.iMovie.plist *
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Screen must be set to Million-colors
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
iMovie updated ?
QuickTime updated ?
Mac OS version ?
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match. iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Lennart Thelander
I run "Cache Out X", clear out all caches and restarts the Mac.
Yours Bengt W

AirPort Utility not detecting Airport Base Station nor Airport Express

Earlier today, we were listening to music on multiple speakers (computer and airtunes / airport express) as we always do. Nothing new here. Stereo speakers stopped and computer lost connection with Airport Express. Couldn't get it to reconnect. Unplugged airport express and plugged it back in - no dice. Hard restart.....AirPort Utility detected it once and I tried to reconfigure. Got an error message at the end of configuration.....
Now.....
Airport Utility doesn't even pick up the Airport Express. Not only that, it doesn't pick up the Airport base station, which we use for our internet connection (and I'm using right now). Both are old - Airport base station is the round small anthill looking one (probably about 6 or 7 years old) and airport express is about 5 years old. Never had a problem with either. Airport Utility is 5.4.2.
For now, Airport base station is working, but I don't have access to it via Airport Utility. Airport express just flashes amber......

Welcome to the discussions!
Not sure what to suggest that you may have not already tried. I would recommend that you start with the base station first to see if you can access the settings in AirPort Utility.
Have you tried connecting an ethernet cable from your computer directly to one of the LAN ports on your base station to see if that will help? Power down your base station and computer before you hook up the ethernet cable. If no luck at first, leave the ethernet cable connected as sometimes the base station will simply "appear" after a few minutes.
If still no luck after several tries, your only alternative is to hard reset the router back to factory defaults and try to reconfigure it.
Once you get the base station back, you can use the same procedure on the Express to see if you can reconfigure it.

Airport Utility not seeing Airport Express base station

Since I got access to cable internet a few days ago, I've been using my Airport Express base station with no problems on my MacBook. Today I tried to set up my roommate's PC (she has Vista, if that matters) so she can get online. So we downloaded the AE Utility for Windows, then reset both the modem and the AE base about two times, but her computer won't see the Express base at all when it scans.
Any ideas? Do we need to go into her Network preferences on the Control Panel or something? I've been through the manual but it wasn't much help. Sorry this is such a basic question, thanks for all helpful suggestions!

You had everything working properly.
There was no need for her to have Airport Utility on her computer as the Airport Base station was already set up.
Set your system up the way it was and then on her computer, just have her join the network.
Do not use Airport Utility for anything on her computer.

Mac G5 (OS X.3) wont recognize airport express base station.

When I use AirPort Express setup, the base station doesn't even get recognized, even when it is in the same room. The base station flashes yellow.
I am using a Linsys WRT54G wireless router to connect to Comcast. Is there some other setting I need to adjust to get my computer to recognize the base station?
Thanks!

I suggest you follow the instructions posted here by David Lovell, which will help guide you through the process of configuring your Airport Express to join the existing wireless network created by your WRT54G. And yes, these instructions work equally well for Macs or PCs.
David Lovell, "Airtunes for XP with a Wired/Wireless network" #1, 09:05pm Jan 8, 2005 CDT

Will Airport Base Station (white) work with MacBook Pro?

I have an older Airport Base Station (white) which I'd like to use with a new MacBook Pro laptop. However when I try to set it up I get a message that the base station doesn't see my wireless card. The card is listed in system profiler but the base station doesn't recognize it. Is the Airport base station compatible with the newer airport extreme card in the Macbook Pro?

Bill,
Yes, the newer Airport Cards are backward compatible with the older 802.11b technology.
How are you trying to set this up?
Are you using Airport Setup Assistant?
Try using the Assistant to "Change settings on an existing Airport Base Station".
See if your computer will find the base station this way.
Make sure you allow the Assistant to set up your computer using DHCP and IPv6. You can always change them back manually when you are finished.
Let us know what happens.

TS2220 the following message applies to my airport Utility: This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Suppor

This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
This is the message I have recieved in installing my AirPort Utility... Can anyone help me?

Old AirPort base stations and Time Capsules aren't compatible with AirPort Utility 6.2, so you have to use AirPort Utility 5.6. As you have already updated, you can't install AirPort Utility 5.6 by the normal way.
To install AirPort Utility 5.6 on your MacBook Pro, follow these steps > http://frank.is/mountain-lion-and-the-old-airport-utility/

Dial up account setting issue with graphite base station and ibook

hello, I have spent hours and hours researching this issue. I cannot connect to the internet using my graphite base station and ibook. It seems to be a settings/configuration issue for my dial up account. what settings do I use? which account do I choose? Same as modem settings? is there a conflict somewhere? The airport card was checked at the apple genius bar, it's ok. How do i configure the base station? Thanks. What's with the paper clip deal? Is orange or green the preferred color?

Anyway, how do you change the modem settings on the airport.
You need to administer the Graphite using AirPort Admin Utility. To do so with a computer running Mac OS X 10.4, you should use AirPort Admin Utility for Graphite and Snow 4.2.5. First, join the computer to the Graphite's wireless network. Then, launch the utility, select the Graphite on the opening screen, click "Configure," and enter the Graphite's base station password. (Note: the base station password is not the same thing as your wireless network password and is also not the same thing as your dial-up account password.) The dial-up modem settings are found in the "Internet" pane of AirPort Admin Utility. In the "Connect Using" pop-up menu, select "Modem (V.90)" if your Internet Service Provider ("ISP") supplies a telephone number that is compatible with the V.90 protocol. The actual settings to enter (the dial-up telephone number of your ISP; your ISP account name and password; and (if necessary) DNS server addresses and/or domain name) are those specified by your ISP.
Does this affect the dial up internal modem settings?
No. The internal modem settings and the AirPort settings on your computer are found in different portions of the Network pane of System Preferences. The computer connects to the base station via AirPort, regardless of how the base station connects to the Internet.
The internal modem settings on the computer, if they work, may be useful as a reference. The account name and other settings to use in the "Internet" tab of AirPort Admin Utility are the same ones that you would use on your computer if your computer were connecting to the Internet using its internal modem.
What's with the paper clip deal?
A paper clip is used if you need to reset the base station. See step 4 of Article HT2439 -- Resetting the AirPort Base Station (Graphite). (Note: the references in this article to AirPort Setup Assistant are out of date. You must instead use AirPort Admin Utility to reconfigure the base station, as well as to reinstall base station software, if you reset the base station.)
Is orange or green the preferred color?
Green. See Article TA25946 -- AirPort Base Station (Graphite): LED Behavior.

Airport Extreme base station and Airport Express

I have both the above but have real trouble getting them to both join the same network. I want to use the base station to hook up to he internet and the Airport Express to drive my stereo in another room Both work fine on their own and on separate networks, but I have to switch from one network to the other if I want to browse or listen to music. Very frustrating. I feel sure I should be able to have both airports on the same network but I just can't get it configured. I am a newbie with WIFI so any help gratefully accepted.

The main base station, the AirPort Extreme, needs to be set up to "Create a wireless network". The AirPort Express needs to be set up to "Join a wireless network", which will be network created by the AirPort Extreme.
Is this how you have them configured now?

HELP! Computer no longer sees base station

Similar Messages

Maybe you are looking for