Help configuring airport for Windows 7 using Basecamp

I installed windows 7 on Basecamp but I can't figure out how to configure it to work wirelessly with my airport base station. If this helps I'm using an AirPort Extreme (0x14E4, 0x93) card that came with the MBP.
I know very little about windows so please explain simply if possible.

If you want Grub to recognize your Slackware install
-install os-prober
-use grub-mkconfig to generate a new grub.cfg

Similar Messages

Help Configuring Grub for Windows 7 + Arch + Another Linux Distro

I have been running Arch on my computer for a few months now and love it and use it as my main OS. However, I do like to try other linux distributions from time to time, just to see what they're about.
My PC has one hard drive and is partitioned like this:
sda1 = NTFS Windows 7 Loader
sda2 = NTFS Windows 7
sda3 = ext4 Slackware
sda4 = ext4 Arch
Note the entry for Slackware. So this morning I decided I wanted to try Slackware. sda3 originally had Ubuntu on it. So I used gParted to format sda3 and I labeled it Slackware. I then went through the Slackware installer and installed Slackware successfully except for one issue - it reported that it could not modify the boot loader. It otherwise reported that the install was successful.
So I rebooted and got the same Grub menu options as I had before the Slackware install attempt, meaning that Ubuntu was still listed as sda3. I tried selecting that and Slack would not load (sorry - I forget the exact error).
I'm pretty sure that Slackware is installed in sda3 and it is just a matter of configuring Grub to recognize it, though I could be wrong. Can anyone provide guidance as to how to solve this problem?

If you want Grub to recognize your Slackware install
-install os-prober
-use grub-mkconfig to generate a new grub.cfg

How can I get airport for windows to detect my newly installed time capsule?

I purchase Time Capsule and Apple TV nearly 2 months ago. I'm just trying to set up Time Capsule via my PC. I've downloaded the Airport for Windows Vista and have got my device already hooked up, but Airport is not detecting the device. I've tried unplugging and rebooting all devices but nothing that I've tried has worked. Any helpful ideas would be greatly appreciated. Thanks in advance!

So you have a Mac somewhere??
Is the TC plugged into the computer using ethernet?? If not do so.. press and hold the reset for 10sec until the front led flashes rapidly.. you want no other network connection to the TC or the computer.
Make sure the computer is set in local network,, ie home, not work or public.
You might have to turn off the firewalls.. if a laptop they are sometimes provided with multiple firewalls.. turn all of them off.
Make sure you are getting an ip from the TC.. if not there is something wrong.. check the ethernet cord is good, and the connectivity led goes on, on both the TC and the computer.. plug it into a different port.
Once you have access then you can complete the setup.

Bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition

bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition the hard drive of iMac and install windows and also photoshop elements? which is the best alternative ? why?

A Photoshop Elements license is good for both Mac and Windows so it should be just a matter of downloading the Mac version and using your current serial number to activate it.
PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
If you have any problem with the activation contact Adobe support using chat... Start Here If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

HT202577 Is the apple configurator available for Windows in order to push profiles to apple TVs?

We currently have a windows environment at work and use 802.1x authentication and have some 1st generation apple TVs. We would like to get them on our wireless but are having issues. I would like to push profiles to these apple TVs to see if I can get them on but I am not going to buy a Mac to do it.
Is the apple configurator available for Windows or even ubuntu?

Hello,
Thanks for using Apple Support Communities.
Apple Configurator requires both Mac OS X, and the most up to date version of iTunes, and can only be installed from the Mac App Store.
Mac App Store - Apple Configurator
Cheers,
Alex H.

SAP Web Dispatcher Configuration guide for Windows

Hi,
I am searching for SAP Web Dispatcher Configuration guide for Windows. It is WAS 6.4, SP14 and JAVA. If any one knows this mean please guide.
Thanks.

Hi Mahesh,
check out the help pages here:
http://help.sap.com/saphelp_nw04/helpdata/en/f5/51c7d170bc4a98b1b5a0339213af57/frameset.htm
Regards,
Pascal

Airport for Windows doesn't start due to missing dnssd.dll?

I've just installed AirPort for Windows v5.4.2 on my Windows XP SP3 laptop, yet it doesn't start due to a supposedly missing dnssd.dll file.
The error message states: "This application has failed to start because dnssd.dll was not found. Re-installing the application may fix this problem" .
Re-installing does not fix this. Any ideas?

That's interesting. It's actually a BonJour dll, and it lives at:
C:\WINDOWS\system32\dnssd.dll
I can replicate your error message by dragging the dll out of system32 and on to the desktop prior to trying to launch the Airport utility.
If it has gone walkabout for you in a similar fashion, here's a way of getting it back.
Restart the PC. Now head into your Add or Remove Programs Control Panel. Select BonJour, click "Change" and then click "Repair".
Does the repair install of BonJour go through properly? If so, can you open the Airport utility without the error message?

User Contributed Tips in the AirPort AirPort for Windows Forum

*The following User Contributed Tips are located in the AirPort > AirPort for Windows Forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
adsfushi72 - What does this acronym mean?
http://discussions.apple.com/thread.jspa?threadID=2450065
Publish date: June 4, 2010
William Kucharski - Having issues with your AirPort connection? Please be specific.
http://discussions.apple.com/thread.jspa?threadID=2227197
Publish date: Nov 21, 2009
William Kucharski - Apple AirPort drivers only support a WEP key index of 1
http://discussions.apple.com/thread.jspa?threadID=1654663
Publish date: Oct 16, 2008
Rich Love - kair: Airport and Roadrunner
http://discussions.apple.com/thread.jspa?threadID=121815
Publish date: Jan 6, 2002
See also the User Tips Library

Airport for Windows unable to update Apple ID, but still gives "Unknown Error" and keeps opening Airport. NEED AN UPDATE!

I found out what's wrong only because I still have an old (2010) Macbook Pro and it's Airport software gets the same error, but it tells me what the problem is and let's me fix it. The problem was I changed my AppleID password and it's apparently stored in the Airport Extreme. The windows version just says Unknown Error and offers Software Update, but there is no update. The problem is Airport Utility keeps opening and repeating this error on all Windows machines. If I didn't have the old mac there would be no way out. Please update Airport for Windows.
PS: I don't have a new Mac because:
1. Price is more than $1,000 higher than comparable PC.
2. No 17" laptop offered.
3. Can get a really good graphics card.
4. Limited availability of the really high performance Intel chips.
5. Price is too high (oh, yes, I said that already).

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

Updating to windows 10 fails on the "Configuring update for Windows 10" screen

Hi, I have a problem with the Windows 10 update on my Lenovo Miix 3 (8") tablet. Whenever the update succesfully downloads, runs the preparing stage for quite a bit, than prompts me to start the upgrade (in the windows 10 update app). When I click it initiates a restart and starts the "Configuring update for Windows 10" screen, but stays on 0% for a minute, than reboots the original system, and the update does not continue. As I log back in the Windows Update window pops up and after a few seconds prompts me to download windows 10 (again). I have already installed a windows 10 in a similar manner on a PC without any hickups. For me it looks like for whatever reason the update fails in the configuring stage, right before reboot. Anyone met this before and maybe have some solution, or should I just try it with a bootable pendrive?

I have same model and sadly, the same problem. It seems to me that the reboot interupts the install and when you sign in again it nulifies the install needing you to start again. On my laptop the reboots went back into the install without needing a login. Hopefully if enough people have same problem a remedy will be found.

Need help with two-factor auth for windows logon using CSS

Hi all,
I have been trying for a couple of days now to get two-factor auth for windows logon working on my X1C Type 3443.
I am running Windows 7 (64-bit) with Lenovo System Update 5.06.0007, Lenovo Solution Center 2.6.001.00, ThinkVantage Fingerprint Software 5.9.9.7282, ThinkVantage Client Security Solution 8.30.0031.00. If it's of any importance, my X1C was originally shipped with Windows 8, but I couldn't stand it and reinstalled Windows 7 instead.
I have uninstalled and reinstalled the above programs in the following order:
1) Install System Update and reboot
2) Install Solution Center and reboot
3) Install CSS and reboot
4) Install Fingerprint Software and reboot
Everything seems to be working fine by itself, except that when I try to configure two-factor auth in CSS, the Fingerprint tab (on the left of the GUI) is greyed out and CSS tells me that I have no fingerprints enrolled. The Fingerprint Software, however, is working just fine and shows me as having a fingerprint enrolled there.
I have spent all morning searching for a solution, but everything I find dates back to 2011, when ThinkPads still came with ThinkVantage Toolbox. I obviously can't download that anymore, so I'm at a loss. Can someone please help? Thanks!
Candace

Hi all,
I have been trying for a couple of days now to get two-factor auth for windows logon working on my X1C Type 3443.
I am running Windows 7 (64-bit) with Lenovo System Update 5.06.0007, Lenovo Solution Center 2.6.001.00, ThinkVantage Fingerprint Software 5.9.9.7282, ThinkVantage Client Security Solution 8.30.0031.00. If it's of any importance, my X1C was originally shipped with Windows 8, but I couldn't stand it and reinstalled Windows 7 instead.
I have uninstalled and reinstalled the above programs in the following order:
1) Install System Update and reboot
2) Install Solution Center and reboot
3) Install CSS and reboot
4) Install Fingerprint Software and reboot
Everything seems to be working fine by itself, except that when I try to configure two-factor auth in CSS, the Fingerprint tab (on the left of the GUI) is greyed out and CSS tells me that I have no fingerprints enrolled. The Fingerprint Software, however, is working just fine and shows me as having a fingerprint enrolled there.
I have spent all morning searching for a solution, but everything I find dates back to 2011, when ThinkPads still came with ThinkVantage Toolbox. I obviously can't download that anymore, so I'm at a loss. Can someone please help? Thanks!
Candace

Need help allocating partition for Windows using Bootcamp?

Using Mac desktop and Boot Camp get to the step where I need to choose what size partition for Windows ver 7 and have tried all different sizes with no luck?
Norm

normbenard wrote:
Using Mac desktop and Boot Camp get to the step where I need to choose what size partition for Windows ver 7 and have tried all different sizes with no luck?
Norm
"...have tried all different sizes with no luck" tells us nothing about what size you tried. If indeed you tried all different sizes then you don't have enough space. What size did you try? What happens when you try? What error messages do you get?

Help with Quicktime for Windows 7 64-bit

I am having a problem with the latest version of Quicktime for Windows. When I launch Quicktime and then 'click' on any icon for download I can see the sentence, "Connecting to iTunes" and then I am redirected to download iTunes... Problem is that I already have iTunes.
Windows 7 Ultimate 64-bit SP1 and up to date.
iTunes version 11.1.3.8
Quicktime version 7.74.80.86
I Unibstalled both products, using the guide provided from Apple. I, then downloaded and installed iTunes first, then I downloaded Quicktime and installed it. I had the same issue. Next, I went to Control Panel/ "programs and Features, used the "change" option and clicked "repair". I did this for both iTunes and Quicktime. They ran fine. No error messages, nothing in event logs, no trace of an install log to try to diagnose this myself. Does anyone have this problem, or can anyone help me to start the diagnosis necessary to solve this?
Second issue came to light after all of the steps I performed; Before, I would conect my iPhone to a USB port and iTunes would launch automatically. Now, it does not. I see my 4s in devices and I see a normal state using device manager. So, I went to "Default Programs" and selected my 4s and the dropdown window no longer has an option for iTunes. However, when I go to choose a default program for audeo, etc. the dropdown mwnu has an option for iTunes.
Thanks for reading and I would like some help.
Doug Shreve

I found the problem and the solution. In Internet Explorer ver 11 / manage plugin's, make sure that the Apple plugin's are enabled. My setings were incorrect, the plugin ws siabled. Enabled it and all is well!

Need Help with safari for Windows 8

i am stuck with the need to have a pc due to a proprietary business software... I am a mac user and prefer to use safari... i just had to by a new pc and tried to download safari for windows 8.1 but cannot find it... any help out there?

Apple hasn't supported Safari for Windows in quite a while (and even when they did, you wouldn't want it - total crap). IE 11 actually isn't bad, you can also try Chrome.

Help configuring PulseAudio for 2.1 on laptop [SOLVED]

Hello
I've been trying to figure out how to properly configure PulseAudio for my laptop for the past couple of nights, but haven't had much luck. I'm may be misunderstanding my laptop's audo setup correctly. Seeing stuff like True 5.1, Dobly Home Theater, and Virtual SurroundSound confused me, but right now I think 5.1 is only for HDMI output (which I don't use). My laptop has a so-called subwoofer and in alsamixer I have controls for front and lfe.
By default, pulseaudio chooses stereo, which sounds fine for anything that stereo or mono, but if I play a DVD in VLC I can barely hear voices and but hear parts of music and background sounds.
Also, for some reason if I run speaker-test -c 2 -t wav. Front-left is loud and somewhat distorted while Front-right is really soft. Yet it still sounds fine (to me) when listening to non-surround content.
Everything worked perfectly before pulseaudio was pulled in.
I tried following this post on manually loading the alsa sources and sink modules, but it didn't work.
Running pulseaudio in verbose mode showed that hw:0 doesn't support 3 channels and then defaults to stereo.
default-sample-channels = 3
default-channel-map = front-left,front-right,lfe
I also just tried the above in daemon.conf just to see what would happen but, it ignored it...
What am I doing wrong? Am I going about this the wrong way?
Any help would be much appreciated.
More information:
My laptop series/specs:
http://support.acer.com/acerpanam/noteb … 0sp2.shtml
uname -a
Linux archlaptop 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 12:14:48 UTC 2011 i686 AMD Athlon(tm) X2 Dual-Core QL-62 AuthenticAMD GNU/Linux
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
default.pa
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
load-module module-alsa-source device=hw:0
load-module module-alsa-sink device=hw:0 channels=3 channel_map=front-left,front-right,lfe
### Automatically load driver modules depending on the hardware available
#.ifexists module-udev-detect.so
#load-module module-udev-detect
#.else
### Use the static hardware detection module (for systems that lack udev/hal support)
#load-module module-detect
#.endif
Last edited by Vortalex (2011-11-14 05:20:52)

Update.
I got vlc to work right. Yay!
I deleted my .vlc directory
Then, manually set the output to alsa (and set Device to Default) which then ungrayed the Audio > Audio Device menu to select Stereo
edit:
I noticed I loose audio in VLC if I pause or seek around too much... Work around for now is to disable and reenable the audio.
looking with pavucontol vlc is still there, it just doesn't do anything.
anyway, this new problem is probably for a different thread
Last edited by Vortalex (2011-11-14 06:34:33)

Help configuring airport for Windows 7 using Basecamp

Similar Messages

Maybe you are looking for